As a conditional it scales its value to the number of options you give it (like volume)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28613 a1c6a512-1295-4272-9138-f99709370657
* Remove wrong comment in config
* Add a note to the LCD driver stating that it isn't complete and thus non-working atm
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28558 a1c6a512-1295-4272-9138-f99709370657
Remove the hardcoded (and way too small) scroll threshold (the distance moved in pixels before we think the users wants to scroll) and replace it with something based on the actual DPI of the screen.
On Android we call the API for that, on other touchscreens we reimplemented Android's formula (as of 2.2) and calculate it.
Flyspray: 11727
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28548 a1c6a512-1295-4272-9138-f99709370657
This adds kinetic scrolling to to lists on touchscreen targets and RaaA, like all other OSes on touchscreens have.
It's only enabled in the absolute point mode, so for non-touchscreen and in grid mode nothing changes.
Kinetic scrolling means that the list keeps scrolling (but is decelerating) after you leave the touchscreen with the finger.
Redraw interval and deceleration is hardcoded for now but could be made configurable if desired.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28408 a1c6a512-1295-4272-9138-f99709370657
The parameter wasn't used yet and it's not clear whether it should be a absolute or relative viewport.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28242 a1c6a512-1295-4272-9138-f99709370657
They work as the drawrect/fillrect pendants but work on a viewport basis; pass NULL to draw the current viewport (the one set with set_viewport()).
In conjunction with action_get_touchscreen_press_in_vp() it should be less of a pain to draw buttons and get presses on them.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28239 a1c6a512-1295-4272-9138-f99709370657
Looks much smoother now as you don't scroll by whole lines anymore.
Add some functions lcd driver to enable the line based scrolling engine to draw the lines with a pixel-based y-offset.
This should also allow for a sensible kinetic scrolling mechanism (still a todo).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28214 a1c6a512-1295-4272-9138-f99709370657
Also add a panicf() if buffer_alloc() doesn't have enough space left to allocate a requested buffer
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28173 a1c6a512-1295-4272-9138-f99709370657
Exclude compilation of firmware/debug.c for hosted platforms.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28125 a1c6a512-1295-4272-9138-f99709370657
For this it needs to look at the plugin header. Since lc_open() doesn't know
it's a plugin, the header needs to be changed slightly to include the new lc_header (which needs to be the first element in plugin_header so it can be casted savely).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28054 a1c6a512-1295-4272-9138-f99709370657
The old cache coherency function names where wrong and misleading.
The new names are (purposely different from vendor manuals)
* commit_* (write-back only)
* discard_* (removing lines from cache only)
* commit_discard_* (write-back and removing lines from cache)
It's suspected the old names have led to wrong uses. The old names still exist
(as aliases) so every call via the old names need to be double checked and changed
to the new name.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28045 a1c6a512-1295-4272-9138-f99709370657
Ask for alignement of USB buffers on cache line
Also remind that the hardware is identical to the hardware in nano2g
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28033 a1c6a512-1295-4272-9138-f99709370657
FCLK is unused because we use fastbus clocking: CPU clock = PCLK
Base PCLK off PLLA and use the lowest frqeuency for FCLK (24MHz source,
maximum divider)
Save a bit of power, adjust Clipv1/e200v2/Fuzev1 current usage accordingly
Note: the power saving (in mA) is a bit less on e200v2/Fuzev1 than on Clipv1
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28000 a1c6a512-1295-4272-9138-f99709370657
AMS*: define CURRENT_MAX_CHG to give more correct estimation of recharge time
The amount of current each target draws from the charger is defined in
powermgmt-target.h
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27994 a1c6a512-1295-4272-9138-f99709370657
- change buffer alignement to 32 bytes (not sure if it's useful)
- flush rx fifo on reset
- use AS3525_PHYSICAL_ADDR for DMA
- reset endpoints structure states on reset
- force full speed for debugging purpose
- add more debugging code
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27986 a1c6a512-1295-4272-9138-f99709370657
Seperate make rules in a almost empty android.make.
Also add forgotten powermgmt-android.c
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27977 a1c6a512-1295-4272-9138-f99709370657
Use host's functions for file i/o directly (open(), close() ,etc.), not the sim_* variants.
Some dir functions need to be wrapped still because we need to cache the parents dir's path (host's dirent doesn't let us know).
For the same reason (incompatibility) with host's dirent) detach some members from Rockbox' dirent struct and put it into an extra one,
the values can be retrieved via the new dir_get_info().
Get rid of the sim_ prefix for sleep as well and change the signature to unix sleep().
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27968 a1c6a512-1295-4272-9138-f99709370657
Since memory on 32mb ipod videos is mapped twice, a 64mb build still has codecs and plugins mapped in a usable area. This means that all that needs to be done to support 32mb and 64mb boards with the same build is to adjust audiobufend to avoid using more than the actually present RAM.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27960 a1c6a512-1295-4272-9138-f99709370657
Removes the need to fix up those in the simulator.
Also work around some posix-mingw incompatibilities (e.g. getcwd()).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27904 a1c6a512-1295-4272-9138-f99709370657
It's a used by codec/plugin loading and vastly reduces code duplication. It's also a step forward in getting rid of libuisimulator in the application ports.
Apparently sh needs linker symbols prefixed with _ even if they're referenced without from C code.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27902 a1c6a512-1295-4272-9138-f99709370657
I don't understand the build error at all, plugin_bss_start is clearly defined in plugin.lds
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27901 a1c6a512-1295-4272-9138-f99709370657
It's a used by codec/plugin loading and vastly reduces code duplication. It's also a step forward in getting rid of libuisimulator in the application ports.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27900 a1c6a512-1295-4272-9138-f99709370657
%Fl now takes an optional 3rd param which is the number of glyphs to cache (default to 256). the smaller the number, the less ram will be used (i.e using 15 for a font which only shown numbers is a good idea)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27882 a1c6a512-1295-4272-9138-f99709370657
* Forward Java KeyEvents to C layer and translate them to Rockbox BUTTON_*.
* Add a basic Android keymap
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27832 a1c6a512-1295-4272-9138-f99709370657
Stop explicitely if a call comes in, and resume playback (if it was playing before the call) upon hang up.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27746 a1c6a512-1295-4272-9138-f99709370657
this greatly reduces CPU load. lcd_update_rect shoves a bit as well.
CPU usage with Rockbox in background is between 3% (with a 200kbps vbr mp3) and 12% (320kbps cbr mp3), so it's low but still dependent on codecs and even particular files.
Driving a WPS with peakmeter, e.g. the builtin one, adds about 30% cpu usage.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27689 a1c6a512-1295-4272-9138-f99709370657
General state is: Rockbox is usable (plays music, saves configuration, touchscreen works too).
Problems:
- Playing music in the background (i.e. when switching to another app) doesn't work reliably, but I'm working on that now.
- no cabbiev2 (only some preliminary files for it), no other default theme.
- screen flickers sometimes if the updates are too frequent
- no multi screen apk/package
- strange behavior when a phone call comes in
The java files (and the eclipse project) resides in android/, which is also supposed to be the build folder.
I've put a small README in there for instructions. There are some steps needed after the make part, which are described there,
and which eclipse mostly handles. But there ought to be some script/makefile rules which do that instead in the future.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27668 a1c6a512-1295-4272-9138-f99709370657
For RaaA it evaluates user paths at runtime. For everything but codecs/plugins it will give the path under $HOME/.config/rockbox.org if write access is needed or if the file/folder in question exists there (otherwise it gives /usr/local/share/rockbox).
This allows for installing themes under $HOME as well as having config.cfg and other important files there while installing the application (and default themes) under /usr/local.
On the DAPs it's a no-op, returing /.rockbox directly.
Not converted to use get_user_file_path() are plugins themselves, because RaaA doesn't build plugins yet.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27656 a1c6a512-1295-4272-9138-f99709370657
This removes the tuner-specific region structs and makes each driver use the common one (which is now extended with a deemphasis field)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27579 a1c6a512-1295-4272-9138-f99709370657
- Move ATTRIBUTE_PRINTF/ATTRIBUTE_SCANF from _ansi.h
They are not related at all to this file, and this broke compilation
with Code Sourcery GCC which ships its own _ansi.h
- Move LIKELY/UNLIKELY from system.h
There is likely a lot more GCC extensions used everywhere in the source,
conditionally on __GNUC__ or unconditionally
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27548 a1c6a512-1295-4272-9138-f99709370657
It still works mostly like the simulator. There's also some minor left overs from the sim, but it does not define SIMULATOR.
It installs into the current (build) dir, and you need to run it with '--root .' (because it looks for ./.rockbox and not ./simdisk/rockbox) as options. That's one of the few kludges left that should be resolved soon'ish.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27310 a1c6a512-1295-4272-9138-f99709370657
ideally all targets should define CACHEALIGN_BITS, for now we default it
to 16 bytes if it's not specified
Since the buffer is already aligned in playback.c no need to align it
again in buffering.c
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27073 a1c6a512-1295-4272-9138-f99709370657
The simulator defines PLATFORM_HOSTED, as RaaA will do (RaaA will not define SIMULATOR).
The new define is to (de-)select code to compile on hosted platforms generally.
Should be no functional change to targets or the simulator.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27019 a1c6a512-1295-4272-9138-f99709370657
Reserve 1MB of DRAM for loading rockbox and use the rest as BSS
Write sdram setup in assembler and move it to a separate file, together
with MMU init code
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26926 a1c6a512-1295-4272-9138-f99709370657
not working yet : an empty drive is detected
won't link on fuzev1: drivers allocated in usb_storage.c are too large
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26905 a1c6a512-1295-4272-9138-f99709370657
Gets a bit more battery life
Adjust current usage, it was a bit too low for Clipv2/Clip+
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26866 a1c6a512-1295-4272-9138-f99709370657
Once all targets are converted we should probably remove all traces of it entirely.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26791 a1c6a512-1295-4272-9138-f99709370657
We can't pop into pc on ARMv4t when using thumb: the T bit won't be
modified if we are returning to a thumb function
Code running on ARMv4t should use the new ldrpc / ldmpc macros instead
of ldr pc, [sp], #4 and ldm(cond) sp!, {regs, pc}
No modification on pure ARM builds and ARMv5+
Note: USE_THUMB is currently never defined, no targets can currently be
built with -mthumb, see FS#6734
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26756 a1c6a512-1295-4272-9138-f99709370657
This adds proper full speed charging support for iPod 4G, Color, Mini 1G, Mini 2G, Nano 1G, and Video. Nano 2G already has support, so now all ipods charge (except 1G-3G whose hardware doesn't support USB charging).
USB charging defaults to on, but will only charge at full speed from a USB host. To charge from an AC charger, you need to set the USB charging mode to "force". It may be possible to detect AC chargers in a future version, at least on some models.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26626 a1c6a512-1295-4272-9138-f99709370657
Enable support for the "force" mode of USB charging. This should work on Gigabeat S and Nano2g (and any other future target which has a RB usb stack and supports charging) - if a host connection is not detected within 10 seconds of USB insertion, assume that the connected device is an AC charger and charge anyway, if the user has specified "force" as the mode.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26594 a1c6a512-1295-4272-9138-f99709370657
1) "Charge during USB connection" option is now tristate: off/on/force. Currently "force" behaves just like "on", but in future it will allow charging even when it was not possible to positively identify a charger.
2) The H300 code has been adjusted to use the new system but there should be no functional differences, it already had the USB charging option and its USB/charging support is hardware controlled.
3) The Gigabeat S code has been adjusted to use the new system: the player now has the USB charging option, which wasn't previously available. The player will only charge at full speed when allowed to do so by a working USB host, so USB AC adapters won't work very well; however, they didn't work before either, so this is not a change in functionality.
4) The iPod Nano 2G code has been adjusted to use the new system: it already had the USB charging option. Using a USB AC adapter won't charge at full speed any more (it did before) - the old implementation was equivalent to the not-yet-implemented "force" option in the new system.
No other target should be affected. Support for the "force" mode and support for at least some other iPod models will come in a future commit :)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26570 a1c6a512-1295-4272-9138-f99709370657
tick_start, fmradio_i2c_init, pcm_init, pcm_postinit, pcm_play_dma_init
Also add some as3525 target specific functions
Make as3525v2 use this attribute
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26328 a1c6a512-1295-4272-9138-f99709370657
Declare VIC registers holding function pointers as volatile pointers to
function pointers and access them directly without casting
UIRQ() is an IRQ handler too, even if it doesn't return
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26313 a1c6a512-1295-4272-9138-f99709370657
A specific poweroff function needs to be used for wake-up to work
Disable RTC in bootloaders for consistency with other Sansas
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26243 a1c6a512-1295-4272-9138-f99709370657
No need for special address handling, all addresses are equal to their physical address
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26176 a1c6a512-1295-4272-9138-f99709370657
- enhance registers description in header file with respect to the as3543
registers: point which one are present or not in the as3543, which bits
change (i didn't detail all registers)
- cache less registers, only up to the ones which are written to
multiple times
- use ascodec_readbytes() to cache all needed registers in a row
- separate the as3543 bits from as3514/as3515 in audiohw_preinit()
- comment out unused audiohw_set_lineout_vol
- some cosmetics
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26174 a1c6a512-1295-4272-9138-f99709370657
Bring Clipv1 & m200v4 plugin buffer down to this limit
zxbox, chessbox and rockboy build on the clip
rockboy doesn't build on m200v4 due to not enough buttons to make a keymap
Some gameboy roms won't run on Clipv1: tetris does but not pokemon for example
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26144 a1c6a512-1295-4272-9138-f99709370657
build it on fuzev2 and clipv2 too, it should be the same controller
as3525v1 file is only build for CONFIG_USBOTG == USBOTG_AS3525, no need
to check for it in the .c file
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26142 a1c6a512-1295-4272-9138-f99709370657
- only enable overlays for targets with very small plugin buffer (<=
0x10000 bytes, i.e. archos)
- change the condition for rockboy to reflect exactly why it can be
built or not
- Some plugins need a large plugin buffer, only enable them if the
buffer is big enough (sizes measured on Clipv1)
- disable MIDI if we have 2MB (or less), we won't be able to load the
instruments in the audio buffer
- remove unusable lua overlay loader
- sokoban code is bigger on clipv1 than on SH, assume it code is 20kB on
anything but SH so it builds with buffer smaller than 192kB
- reduce the Clipv1 plugin buffer size from 288kB to 96kb, disabling
zxbox, chessbox, and fft
zxbox and chessbox have overlays which run on archos, we just need to
enable them on other targets. We'll also be able to run rockboy.
fft won't run as it needs a large plugin buffer for greylib
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26141 a1c6a512-1295-4272-9138-f99709370657
To be sure that there is no mistake in this code, it is run *after*
the known to work HOME & LEFT buttons checks, unlike other Sansas
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26122 a1c6a512-1295-4272-9138-f99709370657
- Enable end of charge monitoring once, it doesn't need to be disabled
- Acknowledge the first (wrong) end of charge interrupt on charger enable
(this had been broken in r25299)
- Centralize reads to ENRD* registers and cache the results when needed
- on PP it is not needed because reads are atomic, we only check for
end of charge when the charging, and for charger presence when
discharging
as3525v2 (using as3543) specifics
- I got the datasheet today from AMS, thanks to them for being so fast
and not require me to sign tons of papers!
- USB detection now works on as3525v2 using the as3543. Clip+ won't
reboot to OF yet, it needs mkamsboot support first (usbstack disabled)
- Charging should work, the CHARGER register is at a different place, it
is an extended PMU register -> use ascodec_read/write_charger() to
access it
- real interrupts are not used yet for ENRD, we get thousands of
interrupts per second, apparently only limited by the i2c clock.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26116 a1c6a512-1295-4272-9138-f99709370657
put your station images in .rockbox/fmpresets/<preset name>.bmp or .jpg. Must be in preset mode and the preset name must match the filename
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26078 a1c6a512-1295-4272-9138-f99709370657
-> Change references to as3517 into as3515
there is a reference to the as3515 in the public as3525 datasheet to
support this fact
as3517 is used in the as3527 SoC, the (public) as3527 datasheet has
detailed information on its registers
the audio codec/PMU used in as3525v2 (thought to be as3543) appears to be
compatible (identical?) with as3517
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26075 a1c6a512-1295-4272-9138-f99709370657
- Refactor the program startup. main() is now in main.c like on target, and the implicit application thread will now act as our main thread (previously a separate one was created for this in thread initialization).
This is part of Rockbox as an application and is the first step to make an application port from the uisimulator. In a further step the sim bits from the sdl build will be separated out.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26065 a1c6a512-1295-4272-9138-f99709370657
Use smaller recording buffer and watermarks on these models with 2MB of ram
Rearrange watermark calculation expressions so we can use fractional
numbers of seconds but still with integer results
Only enable spinup time adjustement for ATA targets
Flash targets (sansas and ondiofm) should still work fine, but they were
not tested
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26014 a1c6a512-1295-4272-9138-f99709370657
also remove an obsolete comment and an unrelated option of the config file
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26000 a1c6a512-1295-4272-9138-f99709370657
When the rest of the code is confirmed to work properly without CPU
frequency changes, it will be possible to reliabily test set_cpu_frequency()
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25924 a1c6a512-1295-4272-9138-f99709370657
If the bit 6 is set volume is much lower, without writing it explicitely
it is undefined.
According to linux sources this bit is related to mixer.
Initialize Audioset2 with low power 'hph' (probably headphones) quality,
as I couldn't make a difference with 'high quality' setting.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25890 a1c6a512-1295-4272-9138-f99709370657
This is to a) to cleanup firmware/common and firmware/include a bit, but also b) for Rockbox as an application which should use the host system's c library and headers, separating makes it easy to exclude our files from the build.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25850 a1c6a512-1295-4272-9138-f99709370657
Remove audiohw_mute from header as well, and make this function static
to each driver (commented out when it was unused)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25733 a1c6a512-1295-4272-9138-f99709370657
it lets you select internal PLL or external MCLK and is not related to mute
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25731 a1c6a512-1295-4272-9138-f99709370657
Doesn't make a binsize difference (the comment says the order should be optimized for size).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25659 a1c6a512-1295-4272-9138-f99709370657
The cost of LBA48 support is very small and it means that upgraded drives/CF cards which are over 128GiB will just work with no custom build required. There should be no runtime effect on disks which do not require it.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25553 a1c6a512-1295-4272-9138-f99709370657
Lots of the changes are due to changing storage_(read|write)sectors() from macros to wrapper functions. This means that they have to be called with IF_MD2(drive,) again.
Flyspray: FS#11167
Author: Frank Gevaerts
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25459 a1c6a512-1295-4272-9138-f99709370657
We can write to DBOP_DOUT in 8 bits mode : bits 7..0 are mapped to the
LCD, not bits 15..12 and 3..0 like on Clipv1
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25455 a1c6a512-1295-4272-9138-f99709370657
Select (B)ootchart in advanced options in configure, and logf will record timings for various stages of boot, for performance comparisons. Format logged is:
BC:>function_name,123,80
where 123 is the line number, 80 is the number of ticks since boot. This can be loaded as CSV into a spreadsheet.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25426 a1c6a512-1295-4272-9138-f99709370657
Move scrollwheel parsing function into separate file as it's reused.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25425 a1c6a512-1295-4272-9138-f99709370657
Instead of modifying CGU_PROC to get 24MHz pclk, just switch to fastbus else Clip+ wouldn't boot
Tested on fuzev1/Clip+
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25413 a1c6a512-1295-4272-9138-f99709370657
Add HAVE_AS3543 config define to differentiate the bits changed since as3514/as3517
Enable recording on Fuzev2/Clipv2/Clip+, although it was tested on Clip+ only
Note: storage is still read-only so I tested by listening to headphones loopback and watching the recording level in recscreen
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25390 a1c6a512-1295-4272-9138-f99709370657
correct USB product ID
remove a define which is common to all as3525v2 and then built-in in the driver
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25367 a1c6a512-1295-4272-9138-f99709370657
Introduce STORAGE_ALIGN_DOWN, STORAGE_PAD (using new CACHE_PAD) and
STORAGE_OVERLAP (using new CACHE_OVERLAP), make them useful only when
PROC_NEEDS_CACHEALIGN and STORAGE_NEEDS_ALIGN are defined
Modify PP and nano2g system-target.h accordingly
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25336 a1c6a512-1295-4272-9138-f99709370657
Move CLKDIV macros into clock-target.h.
Only enable the necessary interfaces for the 3 clock registers used for SD.
Add MEMSTICK and SDSLOT registers to bottom of register display in View HW info debug page.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25309 a1c6a512-1295-4272-9138-f99709370657
as3525 comes with a as3517, as3525v2 with a as3543, rename specific
registers accordingly
Existing problems: FM (line out) doesn't work, volume can't go below a
certain point
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25260 a1c6a512-1295-4272-9138-f99709370657
- buttonlight works
- backlight turns on (quite weak though and no brightness adjustment/backlight off functional)
- don't share drivers with e200v2/fuzev1 for now as it's not entirely clear how dbop plays into this
- deactivte scrollwheel as it's messing up the timer setup in kernel-as3525.c indicating the dbop input reading doesn't work well
- still no working bootloader/no lcd or buttons
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25225 a1c6a512-1295-4272-9138-f99709370657
CGU_PROC looks different from as3525v1 and there have been reports of
Clip+ becoming warm when boosted
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25020 a1c6a512-1295-4272-9138-f99709370657
Introduce a new .init section for initialisation code, so that it can be copied to an area which is later overwritten before calling. The stack/bss can then overwrite that code, effectively freeing the code size that the initialisation routines need. Gives a few kB ram usage back.
Only implemented for PP and as3525 so far. More targets could be added, as well as more functions.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25013 a1c6a512-1295-4272-9138-f99709370657
* font 2-9 in the skins will always be user fonts in the skins
* init the skinfonts array so it doesnt think id 'x' is used already
* make the parser work with FONT_UI untill the very end, even on remote fonts
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24989 a1c6a512-1295-4272-9138-f99709370657
Also that commit breaks plain %pb so make sure you dont use %pb inside a viewport with a font number > 1
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24957 a1c6a512-1295-4272-9138-f99709370657
Compilation shows a warning for the first argument of the lcd_bitmap() call in show_logo().
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24911 a1c6a512-1295-4272-9138-f99709370657
1) seperate UI font for the remote and main displays
2) allow individual skins to load additional fonts for use in the skin (Uo to 7 extra in this first version) see CustomWPS for info on how to load a font in the skins.
Code should always use FONT_UI+screen_number to get the correct user font
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24644 a1c6a512-1295-4272-9138-f99709370657
There is some more work needed:
- Keymaps are definitely not perfect, touchscreen targets are disabled due to no keymap
- There is no manual yet
Author: Delyan Kratunov
Flyspray: FS#10065
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24587 a1c6a512-1295-4272-9138-f99709370657
The code for this was already present as it seems to behave the same as the Video, but CONFIG_CHARGING had not been set, probably for lack of testing. It has now been tested.
This allows the WPS/status bar to correctly display the charging status, and also fixes various bugs:
FS#6891 iPod Nano Charger Support
FS#6940 Nano Car Adapter Mode enabled
FS#10591 iPod nano reboots on idle poweroff when plugged in
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24581 a1c6a512-1295-4272-9138-f99709370657
Now making the Fuzev2 bootloader build should be pretty easy
TODO:
- write button driver (FlynDice found all buttons already)
- find button light
- decide if lcd-ssd1303.c must be modified for Clip+ using SSP or forked
- check if backlight code works (I copied Clipv2 code)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24520 a1c6a512-1295-4272-9138-f99709370657
I'm not crazy about this commit and maybe a better solution would be to outright disable the sbs backdrop when in any skinned screen. This then means backdrops go back to needing special handling (i.e they arnt "free")
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24478 a1c6a512-1295-4272-9138-f99709370657
The PP502x DMA controller can only deal with doing DMA to 16-byte-aligned
addresses because we have inadequate control over the cache to prevent
interference. Other targets may also *prefer* cacheline aligned DMAs to
reduce the number of cache operations required. Almost all disk reads in
buffering.c will now be suitably aligned, allowing DMA to be used on PP502x.
Original change from FS#9708 by Boris Gjenero (dreamlayers).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24440 a1c6a512-1295-4272-9138-f99709370657
DMA is only used for reading because writing seems to be slower with DMA.
Only requests which are cacheline aligned (16 bytes) will use DMA, so many
requests will still use PIO at this point; a later change will align more
reads.
Part of FS#9708, original DMA code by Boris Gjenero (dreamlayers).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24405 a1c6a512-1295-4272-9138-f99709370657
Reclaim 128kB of plugin buffer, audio buffer is now 4 times larger
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24323 a1c6a512-1295-4272-9138-f99709370657
That line is annoying, as it is catches when grepping for HAVE_LCD_COLOR
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24279 a1c6a512-1295-4272-9138-f99709370657
This will enable to use morse input on targets that doesn't have enough key for both the keyboard and morse input in one context.
Enable morse input on archosondio as an example.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24250 a1c6a512-1295-4272-9138-f99709370657
- add lcd_set_invert()
- add lcd_set_flip() commented out since not working fine yet:
mpegplayer isn't flipped, and statusbar display is buggy
- use the registers list from e200v2
- cosmetics (indentation fix, comments changes, function names, casts,
function moves, ...) to make the diff with lcd-e200v2.c shorter
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24181 a1c6a512-1295-4272-9138-f99709370657
Reuse some code from Clip (LCD) and a lot of code from AS3525
Add a new CPU type : AS3525v2, identical to AS3525 except it's an ARMv5 (arm926-ejs)
SD code still not working
For an unknown reason LCD doesn't work anymore (to be investigated)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24131 a1c6a512-1295-4272-9138-f99709370657
Flyspray: FS#10371
Authors: Fred Bauer and myself
Only enabled on e200v2 and Fuze (crashes on clipv1)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23739 a1c6a512-1295-4272-9138-f99709370657
* Remember last used text input mode (keyboard or morse input) in settings.
* Add setting "Use Morse Code Input" under Settings -> General Settings -> System.
Now it is possible for some of targets without button combo for changing input mode to use morse input by changing the setting. it's not possible for them to change input mode during in the keyboard screen of course.
There are still targets without morse input mode.
Flyspray: FS#10338
Author: myself, David Johnston
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23567 a1c6a512-1295-4272-9138-f99709370657
Still disabled on all targets:
- Fuze and e200v2 see spurious interrupts with no source defined
- Clip/m200v4 deadlock instantly when starting recording (perhaps due to low memory size)
Having the code in SVN will make working on this feature easier
Also add keymaps for Fuze, and correct Frequency section of recording
options : the 22.05kHz limitation of e200v1 and c200v1 doesn't apply to
Sansa AMS (different I2S hardware, unrelated to as3514)
Flyspray: FS#10371
Authors: Fred Bauer and myself
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23476 a1c6a512-1295-4272-9138-f99709370657
* don't use DRAM yet in the bootloader linker script
* add header files for the ftl and nand
* update svn:keywords
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23347 a1c6a512-1295-4272-9138-f99709370657
Increase maximum event count as we need more (I actually had a report about it during custom statusbar testing).
Removed corresponding functions from the core and plugin api. Bump min version and sort.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23302 a1c6a512-1295-4272-9138-f99709370657
Fixing it because correcting the event api prototypes causes many warnings.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23301 a1c6a512-1295-4272-9138-f99709370657
- Also fix bug where all other modes were not functional
- Hopefully fixes FS#10651 - H10 USB HID keymap problem
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23228 a1c6a512-1295-4272-9138-f99709370657
Rework keymaps
This commit makes the code neater and more readable. It makes it easier to
modify keymap assignments and new keypad modes.
Some platforms had their keypad mappings reworked.
The manual is updated to reflect all these changes.
H10 remote control mapping dropped.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23219 a1c6a512-1295-4272-9138-f99709370657
Also, changed FLASH_SIZE for the S to 2MB rather than 4MB as all available evidence suggests it's right.
Flyspray: FS#10410 (by me)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23203 a1c6a512-1295-4272-9138-f99709370657
Don't implement usb_enable() is HAVE_USBSTACK is not defined
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23185 a1c6a512-1295-4272-9138-f99709370657
Also update the checkwps makefile to make checkwps builds not break
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@22998 a1c6a512-1295-4272-9138-f99709370657
- Revert renaming of button_set_flip()
- Moved rtl flipping logic to apps/actions.c as a static function
- Joined rtl_button_flip_needed() and button_flip_horizontally()
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@22962 a1c6a512-1295-4272-9138-f99709370657
- Protect mouse keymaps with #ifdef HAVE_USB_HID_MOUSE
- Add preliminary support for remote mouse mode in iPods, pending P#10623
- Use ACTION_USB_HID_MOUSE_WHEEL_SCROLL_UP/DOWN instead of standard INC/DEC
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@22940 a1c6a512-1295-4272-9138-f99709370657
