.. |
config
|
Packard Bell Vibe 500: Enable ATA DMA as in r24405.
|
2010-02-10 18:54:51 +00:00 |
adc.h
|
|
|
ak4537.h
|
3 new ports: Samsung YH-820, YH-920, and YH-925. Mostly functional. Audio working on 820 & 925 (untested on the 920). No battery readings. No recording. No plugins. Keymap needs work.
|
2009-05-25 21:10:45 +00:00 |
akcodec.h
|
3 new ports: Samsung YH-820, YH-920, and YH-925. Mostly functional. Audio working on 820 & 925 (untested on the 920). No battery readings. No recording. No plugins. Keymap needs work.
|
2009-05-25 21:10:45 +00:00 |
as3514.h
|
FS#9611 - Sansa Clip radio code. Commit final part which enables the LINE2 input that carries the analog radio signal on ams sansas.
|
2009-02-05 19:57:18 +00:00 |
as3525.h
|
as3525: add a few more CGU_PERI definitions
|
2010-02-06 14:33:40 +00:00 |
as3525v2.h
|
FS#10047 : Clipv2
|
2009-12-31 19:15:20 +00:00 |
ascodec.h
|
|
|
at91sam9260.h
|
Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h
|
2009-06-29 14:30:12 +00:00 |
ata.h
|
Commit FS#9545, storage cleanup and multi-driver support
|
2009-07-17 22:28:49 +00:00 |
ata_idle_notify.h
|
undo the last commit... I'm too tired to fgure out how to make batt bench work without the spin down notification (aka, fix red the really lazy way)
|
2010-01-19 08:04:36 +00:00 |
ata_mmc.h
|
Merge tCardInfo struct (MMC) and tSDCardInfo struct (SD)
|
2009-07-01 10:07:22 +00:00 |
audio.h
|
mpeg.h/c cleanup
|
2009-11-16 22:02:06 +00:00 |
audiohw.h
|
Many more drivers for mini2440. Now the main binary compiles and runs.
|
2009-10-26 18:16:58 +00:00 |
backlight-sw-fading.h
|
Get rid of the last "backlight thread fading" remnant, and of the calculation of the delay. It actually wasn't more than those 3 cases before anyway.
|
2009-03-11 21:10:17 +00:00 |
backlight.h
|
Remove the calls to backlight_lcd_sleep_countdown from target specific code and move it into backlight.c
|
2009-04-26 01:23:39 +00:00 |
bidi.h
|
|
|
bitswap.h
|
|
|
buffer.h
|
|
|
button.h
|
Fix red: Invert buttons in RTL mode
|
2009-10-05 17:53:45 +00:00 |
config.h
|
Make Clip+ bootloader build
|
2010-02-05 12:40:25 +00:00 |
config_caps.h
|
|
|
cpu.h
|
FS#10047 : Clipv2
|
2009-12-31 19:15:20 +00:00 |
debug.h
|
Final removal of tabs in firmware path
|
2010-01-03 11:31:14 +00:00 |
disk.h
|
Commit FS#9545, storage cleanup and multi-driver support
|
2009-07-17 22:28:49 +00:00 |
dm320.h
|
M:Robe 500: Add support for DMA based LCD updates when in Portrait mode. TestFPS measures 190 FPS with the DMA updates vs. 58 FPS for the non-DMA updates.
|
2009-08-20 00:36:39 +00:00 |
ds2411.h
|
|
|
eeprom_24cxx.h
|
Various files: make function implementations consistent with their declaration in the header file or static if
|
2009-01-31 23:51:11 +00:00 |
eeprom_settings.h
|
|
|
enc_base.h
|
|
|
events.h
|
Convert lcd_activation callbacks to use the event system to allow for multiple parallel callbacks (for custom statusbar).
|
2009-10-20 21:54:59 +00:00 |
fat.h
|
Patch #1 from FS#10633 (Nano 2G developments) by Michael Sparmann - Allows targets to set a different sector size than 512 for the storage system. Should not affect any other target.
|
2009-10-02 16:41:55 +00:00 |
filefuncs.h
|
Move strip_volume() to filefuncs.c and set properties.
|
2009-11-26 22:34:08 +00:00 |
fmradio.h
|
|
|
fmradio_i2c.h
|
Fix red.
|
2008-12-21 20:31:31 +00:00 |
font.h
|
Font improvements: Fix bug that caused some fonts to be rendered garbled on custom builds with MAX_FONT_SIZE > 64k (closes FS#10844). Simplify version check. Use void pointer and explicit casting for the offsets to make it clearer that they may be of different sizes, add a comment too. Use uint16_t in stead of short in some places for consistency. Replace magic number with meaningful define.
|
2009-12-13 11:07:40 +00:00 |
gdb_api.h
|
|
|
general.h
|
Move screendump from apps to firmware, solving two nasty firmware-to-apps calls. This required to move the filename creation functions as well. * Fix bug in the BMP header of Clip screendumps. * Add remote screendump for targets with an LCD remote. * Simplify some ifdefs and rename a macro in the sim.
|
2009-02-10 23:43:37 +00:00 |
generic_i2c.h
|
Simplify generic_i2c, removing the link between i2c address and i2c interface, adding the concept of an i2c bus index.
|
2009-03-03 18:00:17 +00:00 |
hangul.h
|
|
|
hd66789r.h
|
|
|
hotswap.h
|
Remove unused card_detect(), and make card_detect_target() static inline in each sd driver.
|
2009-11-26 00:51:09 +00:00 |
hwcompat.h
|
|
|
i2c-coldfire.h
|
Fix more tabs
|
2010-01-03 10:27:43 +00:00 |
i2c-pp.h
|
Move private #defines from i2c-pp.h to i2c-pp.c
|
2009-05-21 14:31:47 +00:00 |
i2c-s5l8700.h
|
S5L8700: implement i2c driver (used for communicating with the RTC and the codec in the meizus)
|
2009-06-27 20:11:11 +00:00 |
i2c.h
|
|
|
i2s.h
|
|
|
iap.h
|
Add support for the ipod FM remote to the 4G, Color, 5G, nano 1G with RDS
|
2009-12-01 17:54:40 +00:00 |
ifp_usb_serial.h
|
|
|
imx31l.h
|
Remove svn:executable from firmware
|
2009-10-31 02:26:40 +00:00 |
ipod_remote_tuner.h
|
Add support for the ipod FM remote to the 4G, Color, 5G, nano 1G with RDS
|
2009-12-01 17:54:40 +00:00 |
isp1362.h
|
|
|
isp1583.h
|
Correct svn:keywords and svn:eol-style on a few more files.
|
2009-07-12 09:43:44 +00:00 |
jz4740-codec.h
|
Fix yellow
|
2009-05-26 23:28:53 +00:00 |
jz4740.h
|
Ingenic Jz4740: add basic frequency switching
|
2009-07-03 21:34:40 +00:00 |
jz_mxu.h
|
Ingenic Jz4740:
|
2008-12-31 01:57:07 +00:00 |
kernel.h
|
Guard the Timeout API declarations with the correct #ifdef
|
2009-07-14 20:04:26 +00:00 |
lcd-charcell.h
|
|
|
lcd-remote.h
|
Revise r23225 a bit, removing the debug_printf function and implementing more generic lcd_(remote)_putsf function(s) instead and use those in more places
|
2009-10-17 18:02:48 +00:00 |
lcd.h
|
Fix more tabs
|
2010-01-03 10:27:43 +00:00 |
led.h
|
|
|
logf.h
|
A new implementation of logf, logfdisplay and logfdump.
|
2009-08-21 22:54:23 +00:00 |
ltv350qv.h
|
|
|
lv24020lp.h
|
|
|
m5636.h
|
|
|
m66591.h
|
Correct svn:keywords and svn:eol-style on a few more files.
|
2009-07-12 09:43:44 +00:00 |
mas.h
|
Fix more tabs
|
2010-01-03 10:27:43 +00:00 |
mas35xx.h
|
|
|
mc13783.h
|
imx31/mc13783: Do some housekeeping with register macros, function names and other defines. No functional changes (except to alter a couple int priorities).
|
2009-03-22 01:50:48 +00:00 |
mcf5249.h
|
Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h
|
2009-06-29 14:30:12 +00:00 |
mcf5250.h
|
|
|
mips-archdefs.h
|
Onda VX747:
|
2009-02-16 22:49:58 +00:00 |
mips.h
|
Onda VX747:
|
2009-02-16 22:49:58 +00:00 |
mipsregs.h
|
Onda VX747:
|
2009-02-16 22:49:58 +00:00 |
mmc.h
|
Commit FS#9545, storage cleanup and multi-driver support
|
2009-07-17 22:28:49 +00:00 |
mp3_playback.h
|
|
|
mv.h
|
Commit FS#9545, storage cleanup and multi-driver support
|
2009-07-17 22:28:49 +00:00 |
nand.h
|
Core changes to allow storage drivers to do cleanup on shutdown, and iPod Nano 2G shutdown code rework (FS#10668)
|
2009-10-09 20:36:09 +00:00 |
nand_id.h
|
Correct svn:keywords and svn:eol-style on a few more files.
|
2009-07-12 09:43:44 +00:00 |
ohci.h
|
Add data structures
|
2009-07-12 15:29:22 +00:00 |
panic.h
|
|
|
pcf5060x.h
|
D2: Use a common function for reading ADC values from the PMU
|
2009-10-08 15:47:43 +00:00 |
pcf5063x.h
|
Initial support for runtime detection of the PMU used in newer D2+ models (PCF50635). The backlight and battery monitoring should work, but the RTC and touchscreen are not yet implemented.
|
2009-10-10 17:35:02 +00:00 |
pcf50605.h
|
|
|
pcf50606.h
|
D2: Use a common function for reading ADC values from the PMU
|
2009-10-08 15:47:43 +00:00 |
pcf50635.h
|
Initial support for runtime detection of the PMU used in newer D2+ models (PCF50635). The backlight and battery monitoring should work, but the RTC and touchscreen are not yet implemented.
|
2009-10-10 17:35:02 +00:00 |
pcm.h
|
Gigabeat S: Implement an SDMA API and use it in the PCM driver. Some other miscellaneous adjustments to recording and PCM buffer to accomodate use of physical addresses and cache coherency.
|
2009-02-08 22:32:41 +00:00 |
pcm_sampr.h
|
|
|
pl081.h
|
Sansa AMS: Use DMA for SD transfers (read and write)
|
2008-11-25 13:38:32 +00:00 |
pl180.h
|
AMS Sansa: Add voltage defines to pl180.h. No functional changes.
|
2009-10-19 05:34:17 +00:00 |
pnx0101.h
|
Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h
|
2009-06-29 14:30:12 +00:00 |
power.h
|
Make si4700 tuner driver more sane with bit and field defines and entirely hide strange i2c interface from code with write/set/clear/masked functionality. On Gigabeat S use by-the-book busmode selection and GPIO lines. Implement some primitive station detection, debug registers in screen, and misc. changes to tie things together.
|
2008-12-27 19:18:50 +00:00 |
powermgmt.h
|
1 mA gets rounded to 0 during computation, so use 2 mA as the default.
|
2009-06-29 21:40:03 +00:00 |
pp5002.h
|
Make RoLo work on PP5002. * Rename CACHE_CTL flag values on PP5002 for consistency.
|
2009-10-19 21:38:52 +00:00 |
pp5020.h
|
Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h
|
2009-06-29 14:30:12 +00:00 |
pp5024.h
|
|
|
pp6100.h
|
Add information gleaned from disassembling the main firmware image. Detect lcd type in use. Still no actual output
|
2009-07-17 20:40:40 +00:00 |
profile.h
|
|
|
qt1106.h
|
|
|
r61509.h
|
Onda VX7x7: fix error when compiling with USB_BOOT defined
|
2009-07-29 12:57:42 +00:00 |
ramdisk.h
|
Commit FS#9545, storage cleanup and multi-driver support
|
2009-07-17 22:28:49 +00:00 |
rolo.h
|
|
|
rtc.h
|
FS#10569 RTC driver cleanup
|
2009-09-26 14:58:32 +00:00 |
s1a0903x01.h
|
|
|
s3c2440.h
|
Replace hard coded memory size
|
2009-10-31 23:35:20 +00:00 |
s5l8700.h
|
Add missing parentheses to S5L8701 USEC_TIMER
|
2009-11-25 20:16:16 +00:00 |
screendump.h
|
Fix the Playersim as well.
|
2009-02-11 00:10:35 +00:00 |
scroll_engine.h
|
revert r24478 and make the backdrop behaviour the same as it used to be (so when in the wps the sbs' backdrop will be fully disabled). Also changes the API back to having to manually set the current backdrop.
|
2010-02-08 09:38:03 +00:00 |
sd.h
|
Remove unused card_detect(), and make card_detect_target() static inline in each sd driver.
|
2009-11-26 00:51:09 +00:00 |
serial.h
|
Commit FS#8624 by Linus Nielsen, Ryan Press, Craig Elliott, and Kenderes Tamas. Adds preliminary support for numerous accessories that use the ipod serial port on the dock connector. See IpodAccessories for a list of tested devices.
|
2008-12-25 01:46:16 +00:00 |
sh7034.h
|
Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h
|
2009-06-29 14:30:12 +00:00 |
si4700.h
|
Make si4700 tuner driver more sane with bit and field defines and entirely hide strange i2c interface from code with write/set/clear/masked functionality. On Gigabeat S use by-the-book busmode selection and GPIO lines. Implement some primitive station detection, debug registers in screen, and misc. changes to tie things together.
|
2008-12-27 19:18:50 +00:00 |
sound.h
|
* Move DSP_CALLBACK_* enum to sound.h
|
2009-08-01 21:38:18 +00:00 |
spdif.h
|
|
|
spi.h
|
Correct svn:keywords and svn:eol-style on a few more files.
|
2009-07-12 09:43:44 +00:00 |
storage.h
|
Fix more tabs
|
2010-01-03 10:27:43 +00:00 |
structec.h
|
|
|
sw_i2c.h
|
|
|
synaptics-mep.h
|
Packard Bell Vibe 500: touchpad code rework. Improve touch sensivity a bit by setting the MEP parameters in the power_init() function. Implement new function in synaptics-mep driver (touchpad_set_parameter) necessary for it. Move the button lights code to the target backlight file.
|
2010-02-06 19:15:43 +00:00 |
system.h
|
Remove unneeded instruction from the coldfire ffs function and fix a wrong comment
|
2009-12-16 16:39:24 +00:00 |
tcc77x.h
|
TCC: Implement ECC error correction for sectors read from NAND. Tested on D2 (78x, MLC) and M200 (77x, SLC).
|
2009-08-12 19:26:04 +00:00 |
tcc780x.h
|
D2: Enable ARM cache coherency functions (eg. during codec load), which should eliminate data aborts/freezes on track changes. NOTE: The linker script reserves space at the end of DRAM for the TTB, but this is not currently used.
|
2009-09-01 21:35:37 +00:00 |
tea5760.h
|
Meizu: implement i2c for the meizu fmradio and update the tea5760 tuner driver
|
2009-07-07 21:57:16 +00:00 |
tea5767.h
|
|
|
thread.h
|
MIPS: don't save gp register when switching threads
|
2009-05-06 19:51:34 +00:00 |
timer.h
|
Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h
|
2009-06-29 14:30:12 +00:00 |
tlv320.h
|
cleanup audiohw_set_frequency by adding it to audiohw.h and removing it from all driver .h files
|
2009-01-20 22:55:10 +00:00 |
touchscreen.h
|
Remove svn:executable from firmware
|
2009-10-31 02:26:40 +00:00 |
tsc200x.h
|
Touchscreen support for newer Cowon D2+ hardware revisions (using TSC200x touchscreen controller).
|
2009-10-15 20:13:29 +00:00 |
tsc2100.h
|
Correct svn:keywords and svn:eol-style on a few more files.
|
2009-07-12 09:43:44 +00:00 |
tuner.h
|
Add support for the ipod FM remote to the 4G, Color, 5G, nano 1G with RDS
|
2009-12-01 17:54:40 +00:00 |
uda1341.h
|
Improvements to mini2440/UDA1341 audio
|
2009-11-01 22:58:08 +00:00 |
uda1380.h
|
Fix more tabs
|
2010-01-03 10:27:43 +00:00 |
udacodec.h
|
Create an udacodec interface (similar to ascodec and wmcoded) and adapt/implement it for the iriver h1xx/h3xx and the meizus.
|
2009-06-28 17:43:04 +00:00 |
usb-s3c6400x.h
|
iPod Nano 2G USB support based on the S3C6400X datasheet. Disabled by default for now.
|
2009-10-20 06:37:07 +00:00 |
usb-tcc.h
|
Fix more tabs
|
2010-01-03 10:27:43 +00:00 |
usb.h
|
Add initial Packard Bell Vibe 500 port, by Szymon Dziok
|
2010-01-18 19:05:20 +00:00 |
usb_ch9.h
|
Fix more tabs
|
2010-01-03 10:27:43 +00:00 |
usb_core.h
|
Change control handling to start expecting host packets before sending data to the host. This makes the handling less timing sensitive on some controllers
|
2009-10-19 16:21:50 +00:00 |
usb_drv.h
|
Add working USB HID driver, by Tomer Shalev (part of his GSoC work).
|
2009-05-16 15:30:09 +00:00 |
wm8731.h
|
cleanup audiohw_set_frequency by adding it to audiohw.h and removing it from all driver .h files
|
2009-01-20 22:55:10 +00:00 |
wm8751.h
|
cleanup audiohw_set_frequency by adding it to audiohw.h and removing it from all driver .h files
|
2009-01-20 22:55:10 +00:00 |
wm8758.h
|
Commit FS#10082, enlarge volume control range for WM8758. This will enable volume control down to -90 dB for iPod Video targets.
|
2010-01-23 19:28:26 +00:00 |
wm8975.h
|
cleanup audiohw_set_frequency by adding it to audiohw.h and removing it from all driver .h files
|
2009-01-20 22:55:10 +00:00 |
wm8978.h
|
cleanup audiohw_set_frequency by adding it to audiohw.h and removing it from all driver .h files
|
2009-01-20 22:55:10 +00:00 |
wm8985.h
|
D2: Enable FM radio (based on FS#10035 by Michael Burtin with some changes by myself). Also updates the LV24020 driver to add optional logf debugging.
|
2009-03-21 00:13:20 +00:00 |
wmcodec.h
|
|
|