| .. |
|
adc.h
|
|
|
|
ak4537.h
|
3 new ports: Samsung YH-820, YH-920, and YH-925. Mostly functional. Audio working on 820 & 925 (untested on the 920). No battery readings. No recording. No plugins. Keymap needs work.
|
2009-05-25 21:10:45 +00:00 |
|
akcodec.h
|
3 new ports: Samsung YH-820, YH-920, and YH-925. Mostly functional. Audio working on 820 & 925 (untested on the 920). No battery readings. No recording. No plugins. Keymap needs work.
|
2009-05-25 21:10:45 +00:00 |
|
as3514.h
|
FS#9611 - Sansa Clip radio code. Commit final part which enables the LINE2 input that carries the analog radio signal on ams sansas.
|
2009-02-05 19:57:18 +00:00 |
|
as3525.h
|
Speed up the Fuze's LCD by a factor of ~2.1 (lcd_update()) by using 32bit transfers when possible.
|
2009-08-31 15:54:25 +00:00 |
|
ascodec.h
|
|
|
|
at91sam9260.h
|
Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h
|
2009-06-29 14:30:12 +00:00 |
|
ata.h
|
Commit FS#9545, storage cleanup and multi-driver support
|
2009-07-17 22:28:49 +00:00 |
|
ata_idle_notify.h
|
Correct wrong usage of event callbacks all over the place. It's not supposed to return anything, and should take a data parameter.
|
2009-10-20 21:54:44 +00:00 |
|
ata_mmc.h
|
Merge tCardInfo struct (MMC) and tSDCardInfo struct (SD)
|
2009-07-01 10:07:22 +00:00 |
|
audio.h
|
FS9795 - some playback cleanup.
|
2009-04-06 00:39:43 +00:00 |
|
audiohw.h
|
Many more drivers for mini2440. Now the main binary compiles and runs.
|
2009-10-26 18:16:58 +00:00 |
|
backlight-sw-fading.h
|
Get rid of the last "backlight thread fading" remnant, and of the calculation of the delay. It actually wasn't more than those 3 cases before anyway.
|
2009-03-11 21:10:17 +00:00 |
|
backlight.h
|
Remove the calls to backlight_lcd_sleep_countdown from target specific code and move it into backlight.c
|
2009-04-26 01:23:39 +00:00 |
|
bidi.h
|
|
|
|
bitswap.h
|
|
|
|
buffer.h
|
|
|
|
button.h
|
Fix red: Invert buttons in RTL mode
|
2009-10-05 17:53:45 +00:00 |
|
config-c100.h
|
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
|
2009-09-06 17:12:09 +00:00 |
|
config-c200.h
|
Commit "FS#10468 - USB HID: Show keypad mode on screen"
|
2009-09-30 10:06:04 +00:00 |
|
config-c200v2.h
|
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
|
2009-09-06 17:12:09 +00:00 |
|
config-clip.h
|
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
|
2009-09-06 17:12:09 +00:00 |
|
config-cowond2.h
|
remove accidentally commited spaces.
|
2009-10-27 20:59:26 +00:00 |
|
config-creativezv.h
|
Remove unused #defines.
|
2009-10-31 19:27:56 +00:00 |
|
config-creativezvm.h
|
Remove unused #defines.
|
2009-10-31 19:27:56 +00:00 |
|
config-creativezvm60gb.h
|
Remove unused #defines.
|
2009-10-31 19:27:56 +00:00 |
|
config-e200.h
|
Commit "FS#10468 - USB HID: Show keypad mode on screen"
|
2009-09-30 10:06:04 +00:00 |
|
config-e200v2.h
|
Sansa Fuze & e200v2 : do not enable USBSTACK in the bootloader
|
2009-10-15 10:23:18 +00:00 |
|
config-fmrecorder.h
|
Move Archos battery runtime estimation defines into config files instead of powermgmt.h. Replace old default values (which were actually the Archos Player currents) with a new default (1mA). This should give nonsense runtime estimates (instead of semi-reasonable but completely wrong estimates) on all players that do not have a battery current defined. Hopefully this will remind people that they should define the battery current when they start a new port.
|
2009-06-29 18:32:43 +00:00 |
|
config-fuze.h
|
Sansa Fuze & e200v2 : do not enable USBSTACK in the bootloader
|
2009-10-15 10:23:18 +00:00 |
|
config-gigabeat-s.h
|
Remove unused #defines.
|
2009-10-31 19:27:56 +00:00 |
|
config-gigabeat.h
|
Remove unused #defines.
|
2009-10-31 19:27:56 +00:00 |
|
config-h10.h
|
USB HID: Add mouse mode to h10
|
2009-10-17 15:20:23 +00:00 |
|
config-h10_5gb.h
|
USB HID: Add mouse mode to h10
|
2009-10-17 15:20:23 +00:00 |
|
config-h100.h
|
LCD_DEPTH == 2, vertical packing: specify if lcd framebuffer is in iram into the model specific config file
|
2009-08-18 04:24:01 +00:00 |
|
config-h120.h
|
LCD_DEPTH == 2, vertical packing: specify if lcd framebuffer is in iram into the model specific config file
|
2009-08-18 04:24:01 +00:00 |
|
config-h300.h
|
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
|
2009-09-06 17:12:09 +00:00 |
|
config-hdd1630.h
|
Remove svn:executable from firmware
|
2009-10-31 02:26:40 +00:00 |
|
config-iaudio7.h
|
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
|
2009-09-06 17:12:09 +00:00 |
|
config-iaudiom3.h
|
LCD_DEPTH == 2, vertical interleaved : specify if lcd framebuffer is in iram into the model specific config file
|
2009-08-18 04:23:53 +00:00 |
|
config-iaudiom5.h
|
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
|
2009-09-06 17:12:09 +00:00 |
|
config-iaudiox5.h
|
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
|
2009-09-06 17:12:09 +00:00 |
|
config-ifp7xx.h
|
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
|
2009-09-06 17:12:09 +00:00 |
|
config-ipod1g2g.h
|
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
|
2009-09-06 17:12:09 +00:00 |
|
config-ipod3g.h
|
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
|
2009-09-06 17:12:09 +00:00 |
|
config-ipod4g.h
|
Commit "FS#10468 - USB HID: Show keypad mode on screen"
|
2009-09-30 10:06:04 +00:00 |
|
config-ipodcolor.h
|
Commit "FS#10468 - USB HID: Show keypad mode on screen"
|
2009-09-30 10:06:04 +00:00 |
|
config-ipodmini.h
|
Commit "FS#10468 - USB HID: Show keypad mode on screen"
|
2009-09-30 10:06:04 +00:00 |
|
config-ipodmini2g.h
|
Commit "FS#10468 - USB HID: Show keypad mode on screen"
|
2009-09-30 10:06:04 +00:00 |
|
config-ipodnano.h
|
Commit "FS#10468 - USB HID: Show keypad mode on screen"
|
2009-09-30 10:06:04 +00:00 |
|
config-ipodnano2g.h
|
Adjust the iPod Nano 2G CPU clock freq again, this time to an exact value. Also add hardware defines for the 9th DMA channel we discovered on the S5L8701, and fix the µsec timer (there were missing braces).
|
2009-10-24 23:27:13 +00:00 |
|
config-ipodvideo.h
|
Commit "FS#10468 - USB HID: Show keypad mode on screen"
|
2009-09-30 10:06:04 +00:00 |
|
config-logikdax.h
|
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
|
2009-09-06 17:12:09 +00:00 |
|
config-lyre_proto1.h
|
Make JPEG and BMP scaler optional with HAVE_JPEG and HAVE_BMP_SCALING, both defined for all targets that have HAVE_ALBUMART. Disable JPEG in PictureFlow and pluginlib album art search with 32KiB plugin buffer until PictureFlow
|
2009-05-04 15:46:41 +00:00 |
|
config-m200.h
|
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
|
2009-09-06 17:12:09 +00:00 |
|
config-m200v4.h
|
Remove dead or useless defines: HAVE_ONDIO_IC was replaced by CONFIG_I2C but just added not replaced for the OndioFM in errr... r5675. The creativezv* and the m200v4 config files defined CONFIG_I2C twice.
|
2009-09-19 09:37:14 +00:00 |
|
config-meizu-m3.h
|
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
|
2009-09-06 17:12:09 +00:00 |
|
config-meizu-m6sl.h
|
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
|
2009-09-06 17:12:09 +00:00 |
|
config-meizu-m6sp.h
|
Meizu M6 SP: make bootloader compile and run again
|
2009-10-25 13:52:46 +00:00 |
|
config-mini2440.h
|
enable RTC for mini2440.
|
2009-10-31 16:23:18 +00:00 |
|
config-mrobe100.h
|
USB HID: Use different context for each mode; Use constant for each action;
|
2009-10-17 05:39:54 +00:00 |
|
config-mrobe500.h
|
Remove unused #defines.
|
2009-10-31 19:27:56 +00:00 |
|
config-ondavx747.h
|
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
|
2009-09-06 17:12:09 +00:00 |
|
config-ondavx767.h
|
Remove unused #defines.
|
2009-10-31 19:27:56 +00:00 |
|
config-ondiofm.h
|
Remove dead or useless defines: HAVE_ONDIO_IC was replaced by CONFIG_I2C but just added not replaced for the OndioFM in errr... r5675. The creativezv* and the m200v4 config files defined CONFIG_I2C twice.
|
2009-09-19 09:37:14 +00:00 |
|
config-ondiosp.h
|
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
|
2009-09-06 17:12:09 +00:00 |
|
config-player.h
|
Move Archos battery runtime estimation defines into config files instead of powermgmt.h. Replace old default values (which were actually the Archos Player currents) with a new default (1mA). This should give nonsense runtime estimates (instead of semi-reasonable but completely wrong estimates) on all players that do not have a battery current defined. Hopefully this will remind people that they should define the battery current when they start a new port.
|
2009-06-29 18:32:43 +00:00 |
|
config-recorder.h
|
Move Archos battery runtime estimation defines into config files instead of powermgmt.h. Replace old default values (which were actually the Archos Player currents) with a new default (1mA). This should give nonsense runtime estimates (instead of semi-reasonable but completely wrong estimates) on all players that do not have a battery current defined. Hopefully this will remind people that they should define the battery current when they start a new port.
|
2009-06-29 18:32:43 +00:00 |
|
config-recorderv2.h
|
Move Archos battery runtime estimation defines into config files instead of powermgmt.h. Replace old default values (which were actually the Archos Player currents) with a new default (1mA). This should give nonsense runtime estimates (instead of semi-reasonable but completely wrong estimates) on all players that do not have a battery current defined. Hopefully this will remind people that they should define the battery current when they start a new port.
|
2009-06-29 18:32:43 +00:00 |
|
config-sa9200.h
|
Remove svn:executable from firmware
|
2009-10-31 02:26:40 +00:00 |
|
config-tpj1022.h
|
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
|
2009-09-06 17:12:09 +00:00 |
|
config-view.h
|
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
|
2009-09-06 17:12:09 +00:00 |
|
config-yh820.h
|
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
|
2009-09-06 17:12:09 +00:00 |
|
config-yh920.h
|
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
|
2009-09-06 17:12:09 +00:00 |
|
config-yh925.h
|
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
|
2009-09-06 17:12:09 +00:00 |
|
config-yps3.h
|
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
|
2009-09-06 17:12:09 +00:00 |
|
config.h
|
Don't selecu any usb class drivers for a simulator build
|
2009-10-20 18:33:23 +00:00 |
|
config_caps.h
|
|
|
|
cpu.h
|
Introduce S5L8701 CONFIG_CPU definition for Nano2G and a new CPU_S5L870X "family" define - the 8700 and 8701 are proving to be different. Also move all the cpu-specific defines earlier in config.h
|
2009-07-15 21:34:31 +00:00 |
|
debug.h
|
|
|
|
disk.h
|
Commit FS#9545, storage cleanup and multi-driver support
|
2009-07-17 22:28:49 +00:00 |
|
dm320.h
|
M:Robe 500: Add support for DMA based LCD updates when in Portrait mode. TestFPS measures 190 FPS with the DMA updates vs. 58 FPS for the non-DMA updates.
|
2009-08-20 00:36:39 +00:00 |
|
ds2411.h
|
|
|
|
eeprom_24cxx.h
|
Various files: make function implementations consistent with their declaration in the header file or static if
|
2009-01-31 23:51:11 +00:00 |
|
eeprom_settings.h
|
|
|
|
enc_base.h
|
|
|
|
events.h
|
Convert lcd_activation callbacks to use the event system to allow for multiple parallel callbacks (for custom statusbar).
|
2009-10-20 21:54:59 +00:00 |
|
fat.h
|
Patch #1 from FS#10633 (Nano 2G developments) by Michael Sparmann - Allows targets to set a different sector size than 512 for the storage system. Should not affect any other target.
|
2009-10-02 16:41:55 +00:00 |
|
fmradio.h
|
|
|
|
fmradio_i2c.h
|
Fix red.
|
2008-12-21 20:31:31 +00:00 |
|
font.h
|
Get rid of some of the code duplication from checkwps, it still duplicates a lot though.
|
2009-09-13 13:40:58 +00:00 |
|
gdb_api.h
|
|
|
|
general.h
|
Move screendump from apps to firmware, solving two nasty firmware-to-apps calls. This required to move the filename creation functions as well. * Fix bug in the BMP header of Clip screendumps. * Add remote screendump for targets with an LCD remote. * Simplify some ifdefs and rename a macro in the sim.
|
2009-02-10 23:43:37 +00:00 |
|
generic_i2c.h
|
Simplify generic_i2c, removing the link between i2c address and i2c interface, adding the concept of an i2c bus index.
|
2009-03-03 18:00:17 +00:00 |
|
hangul.h
|
|
|
|
hd66789r.h
|
|
|
|
hotswap.h
|
add firmware/driver/sd.c which contains common code between SD drivers
|
2009-07-01 21:49:13 +00:00 |
|
hwcompat.h
|
|
|
|
i2c-coldfire.h
|
|
|
|
i2c-pp.h
|
Move private #defines from i2c-pp.h to i2c-pp.c
|
2009-05-21 14:31:47 +00:00 |
|
i2c-s5l8700.h
|
S5L8700: implement i2c driver (used for communicating with the RTC and the codec in the meizus)
|
2009-06-27 20:11:11 +00:00 |
|
i2c.h
|
|
|
|
i2s.h
|
|
|
|
iap.h
|
Correct svn:keywords and svn:eol-style on a few more files.
|
2009-07-12 09:43:44 +00:00 |
|
ifp_usb_serial.h
|
|
|
|
imx31l.h
|
Remove svn:executable from firmware
|
2009-10-31 02:26:40 +00:00 |
|
isp1362.h
|
|
|
|
isp1583.h
|
Correct svn:keywords and svn:eol-style on a few more files.
|
2009-07-12 09:43:44 +00:00 |
|
jz4740-codec.h
|
Fix yellow
|
2009-05-26 23:28:53 +00:00 |
|
jz4740.h
|
Ingenic Jz4740: add basic frequency switching
|
2009-07-03 21:34:40 +00:00 |
|
jz_mxu.h
|
Ingenic Jz4740:
|
2008-12-31 01:57:07 +00:00 |
|
kernel.h
|
Guard the Timeout API declarations with the correct #ifdef
|
2009-07-14 20:04:26 +00:00 |
|
lcd-charcell.h
|
|
|
|
lcd-remote.h
|
Revise r23225 a bit, removing the debug_printf function and implementing more generic lcd_(remote)_putsf function(s) instead and use those in more places
|
2009-10-17 18:02:48 +00:00 |
|
lcd.h
|
Convert lcd_activation callbacks to use the event system to allow for multiple parallel callbacks (for custom statusbar).
|
2009-10-20 21:54:59 +00:00 |
|
led.h
|
|
|
|
logf.h
|
A new implementation of logf, logfdisplay and logfdump.
|
2009-08-21 22:54:23 +00:00 |
|
ltv350qv.h
|
|
|
|
lv24020lp.h
|
|
|
|
m5636.h
|
|
|
|
m66591.h
|
Correct svn:keywords and svn:eol-style on a few more files.
|
2009-07-12 09:43:44 +00:00 |
|
mas.h
|
FS#9157 - Tidy up some MAS35XX constants
|
2009-10-01 05:25:20 +00:00 |
|
mas35xx.h
|
|
|
|
mc13783.h
|
imx31/mc13783: Do some housekeeping with register macros, function names and other defines. No functional changes (except to alter a couple int priorities).
|
2009-03-22 01:50:48 +00:00 |
|
mcf5249.h
|
Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h
|
2009-06-29 14:30:12 +00:00 |
|
mcf5250.h
|
|
|
|
mips-archdefs.h
|
Onda VX747:
|
2009-02-16 22:49:58 +00:00 |
|
mips.h
|
Onda VX747:
|
2009-02-16 22:49:58 +00:00 |
|
mipsregs.h
|
Onda VX747:
|
2009-02-16 22:49:58 +00:00 |
|
mmc.h
|
Commit FS#9545, storage cleanup and multi-driver support
|
2009-07-17 22:28:49 +00:00 |
|
mp3_playback.h
|
|
|
|
mv.h
|
Commit FS#9545, storage cleanup and multi-driver support
|
2009-07-17 22:28:49 +00:00 |
|
nand.h
|
Core changes to allow storage drivers to do cleanup on shutdown, and iPod Nano 2G shutdown code rework (FS#10668)
|
2009-10-09 20:36:09 +00:00 |
|
nand_id.h
|
Correct svn:keywords and svn:eol-style on a few more files.
|
2009-07-12 09:43:44 +00:00 |
|
ohci.h
|
Add data structures
|
2009-07-12 15:29:22 +00:00 |
|
panic.h
|
|
|
|
pcf5060x.h
|
D2: Use a common function for reading ADC values from the PMU
|
2009-10-08 15:47:43 +00:00 |
|
pcf5063x.h
|
Initial support for runtime detection of the PMU used in newer D2+ models (PCF50635). The backlight and battery monitoring should work, but the RTC and touchscreen are not yet implemented.
|
2009-10-10 17:35:02 +00:00 |
|
pcf50605.h
|
|
|
|
pcf50606.h
|
D2: Use a common function for reading ADC values from the PMU
|
2009-10-08 15:47:43 +00:00 |
|
pcf50635.h
|
Initial support for runtime detection of the PMU used in newer D2+ models (PCF50635). The backlight and battery monitoring should work, but the RTC and touchscreen are not yet implemented.
|
2009-10-10 17:35:02 +00:00 |
|
pcm.h
|
Gigabeat S: Implement an SDMA API and use it in the PCM driver. Some other miscellaneous adjustments to recording and PCM buffer to accomodate use of physical addresses and cache coherency.
|
2009-02-08 22:32:41 +00:00 |
|
pcm_sampr.h
|
|
|
|
pl081.h
|
|
|
|
pl180.h
|
AMS Sansa: Add voltage defines to pl180.h. No functional changes.
|
2009-10-19 05:34:17 +00:00 |
|
pnx0101.h
|
Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h
|
2009-06-29 14:30:12 +00:00 |
|
power.h
|
Make si4700 tuner driver more sane with bit and field defines and entirely hide strange i2c interface from code with write/set/clear/masked functionality. On Gigabeat S use by-the-book busmode selection and GPIO lines. Implement some primitive station detection, debug registers in screen, and misc. changes to tie things together.
|
2008-12-27 19:18:50 +00:00 |
|
powermgmt.h
|
1 mA gets rounded to 0 during computation, so use 2 mA as the default.
|
2009-06-29 21:40:03 +00:00 |
|
pp5002.h
|
Make RoLo work on PP5002. * Rename CACHE_CTL flag values on PP5002 for consistency.
|
2009-10-19 21:38:52 +00:00 |
|
pp5020.h
|
Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h
|
2009-06-29 14:30:12 +00:00 |
|
pp5024.h
|
|
|
|
pp6100.h
|
Add information gleaned from disassembling the main firmware image. Detect lcd type in use. Still no actual output
|
2009-07-17 20:40:40 +00:00 |
|
profile.h
|
|
|
|
qt1106.h
|
set svn properties
|
2008-09-17 18:50:34 +00:00 |
|
r61509.h
|
Onda VX7x7: fix error when compiling with USB_BOOT defined
|
2009-07-29 12:57:42 +00:00 |
|
ramdisk.h
|
Commit FS#9545, storage cleanup and multi-driver support
|
2009-07-17 22:28:49 +00:00 |
|
rolo.h
|
|
|
|
rtc.h
|
FS#10569 RTC driver cleanup
|
2009-09-26 14:58:32 +00:00 |
|
s1a0903x01.h
|
|
|
|
s3c2440.h
|
Many more drivers for mini2440. Now the main binary compiles and runs.
|
2009-10-26 18:16:58 +00:00 |
|
s5l8700.h
|
Adjust the iPod Nano 2G CPU clock freq again, this time to an exact value. Also add hardware defines for the 9th DMA channel we discovered on the S5L8701, and fix the µsec timer (there were missing braces).
|
2009-10-24 23:27:13 +00:00 |
|
screendump.h
|
Fix the Playersim as well.
|
2009-02-11 00:10:35 +00:00 |
|
scroll_engine.h
|
Const police raid\!
|
2009-09-04 16:04:02 +00:00 |
|
sd.h
|
Add define for SD_SET_CLR_CARD_DETECT 42 /* acmd42 */ to sd.h for use with 4 bit WIDEBUS.
|
2009-10-25 05:49:35 +00:00 |
|
serial.h
|
Commit FS#8624 by Linus Nielsen, Ryan Press, Craig Elliott, and Kenderes Tamas. Adds preliminary support for numerous accessories that use the ipod serial port on the dock connector. See IpodAccessories for a list of tested devices.
|
2008-12-25 01:46:16 +00:00 |
|
sh7034.h
|
Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h
|
2009-06-29 14:30:12 +00:00 |
|
si4700.h
|
Make si4700 tuner driver more sane with bit and field defines and entirely hide strange i2c interface from code with write/set/clear/masked functionality. On Gigabeat S use by-the-book busmode selection and GPIO lines. Implement some primitive station detection, debug registers in screen, and misc. changes to tie things together.
|
2008-12-27 19:18:50 +00:00 |
|
sound.h
|
* Move DSP_CALLBACK_* enum to sound.h
|
2009-08-01 21:38:18 +00:00 |
|
spdif.h
|
|
|
|
spi.h
|
Correct svn:keywords and svn:eol-style on a few more files.
|
2009-07-12 09:43:44 +00:00 |
|
storage.h
|
Core changes to allow storage drivers to do cleanup on shutdown, and iPod Nano 2G shutdown code rework (FS#10668)
|
2009-10-09 20:36:09 +00:00 |
|
structec.h
|
|
|
|
sw_i2c.h
|
|
|
|
synaptics-mep.h
|
Clean up the Synaptics touchpad driver.
|
2009-06-19 02:48:15 +00:00 |
|
system.h
|
fix checkwps breakage caused by r229900
|
2009-10-06 22:02:06 +00:00 |
|
tcc77x.h
|
TCC: Implement ECC error correction for sectors read from NAND. Tested on D2 (78x, MLC) and M200 (77x, SLC).
|
2009-08-12 19:26:04 +00:00 |
|
tcc780x.h
|
D2: Enable ARM cache coherency functions (eg. during codec load), which should eliminate data aborts/freezes on track changes. NOTE: The linker script reserves space at the end of DRAM for the TTB, but this is not currently used.
|
2009-09-01 21:35:37 +00:00 |
|
tea5760.h
|
Meizu: implement i2c for the meizu fmradio and update the tea5760 tuner driver
|
2009-07-07 21:57:16 +00:00 |
|
tea5767.h
|
|
|
|
thread.h
|
MIPS: don't save gp register when switching threads
|
2009-05-06 19:51:34 +00:00 |
|
timer.h
|
Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h
|
2009-06-29 14:30:12 +00:00 |
|
tlv320.h
|
cleanup audiohw_set_frequency by adding it to audiohw.h and removing it from all driver .h files
|
2009-01-20 22:55:10 +00:00 |
|
touchscreen.h
|
Remove svn:executable from firmware
|
2009-10-31 02:26:40 +00:00 |
|
tsc200x.h
|
Touchscreen support for newer Cowon D2+ hardware revisions (using TSC200x touchscreen controller).
|
2009-10-15 20:13:29 +00:00 |
|
tsc2100.h
|
Correct svn:keywords and svn:eol-style on a few more files.
|
2009-07-12 09:43:44 +00:00 |
|
tuner.h
|
FS#9824: Fix FM channel spacing for Europe
|
2009-09-24 22:05:07 +00:00 |
|
uda1341.h
|
Many more drivers for mini2440. Now the main binary compiles and runs.
|
2009-10-26 18:16:58 +00:00 |
|
uda1380.h
|
cleanup audiohw_set_frequency by adding it to audiohw.h and removing it from all driver .h files
|
2009-01-20 22:55:10 +00:00 |
|
udacodec.h
|
Create an udacodec interface (similar to ascodec and wmcoded) and adapt/implement it for the iriver h1xx/h3xx and the meizus.
|
2009-06-28 17:43:04 +00:00 |
|
usb-s3c6400x.h
|
iPod Nano 2G USB support based on the S3C6400X datasheet. Disabled by default for now.
|
2009-10-20 06:37:07 +00:00 |
|
usb-tcc.h
|
|
|
|
usb.h
|
FS#10704 - Make a configuration option to disable USB HID
|
2009-10-23 13:29:19 +00:00 |
|
usb_ch9.h
|
reorganise usb_core.c a bit, to make the code more readable and more maintainable (FS#10150 by Tomer Shalev))
|
2009-04-19 19:53:32 +00:00 |
|
usb_core.h
|
Change control handling to start expecting host packets before sending data to the host. This makes the handling less timing sensitive on some controllers
|
2009-10-19 16:21:50 +00:00 |
|
usb_drv.h
|
Add working USB HID driver, by Tomer Shalev (part of his GSoC work).
|
2009-05-16 15:30:09 +00:00 |
|
wm8731.h
|
cleanup audiohw_set_frequency by adding it to audiohw.h and removing it from all driver .h files
|
2009-01-20 22:55:10 +00:00 |
|
wm8751.h
|
cleanup audiohw_set_frequency by adding it to audiohw.h and removing it from all driver .h files
|
2009-01-20 22:55:10 +00:00 |
|
wm8758.h
|
FS#10086 - Playback and recording sample rate setting on the 5G iPod
|
2009-04-06 02:46:42 +00:00 |
|
wm8975.h
|
cleanup audiohw_set_frequency by adding it to audiohw.h and removing it from all driver .h files
|
2009-01-20 22:55:10 +00:00 |
|
wm8978.h
|
cleanup audiohw_set_frequency by adding it to audiohw.h and removing it from all driver .h files
|
2009-01-20 22:55:10 +00:00 |
|
wm8985.h
|
D2: Enable FM radio (based on FS#10035 by Michael Burtin with some changes by myself). Also updates the LV24020 driver to add optional logf debugging.
|
2009-03-21 00:13:20 +00:00 |
|
wmcodec.h
|
|
|
cf01942a57