rockbox/firmware/export
Thomas Martitz 97ed213fce Fix typo
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27981 a1c6a512-1295-4272-9138-f99709370657
2010-09-02 03:53:09 +00:00
..
config Android: Enable software tone controls 2010-09-01 21:32:12 +00:00
adc.h FS#10756 - Free unused init code 2010-03-03 23:20:32 +00:00
ak4537.h 3 new ports: Samsung YH-820, YH-920, and YH-925. Mostly functional. Audio working on 820 & 925 (untested on the 920). No battery readings. No recording. No plugins. Keymap needs work. 2009-05-25 21:10:45 +00:00
akcodec.h 3 new ports: Samsung YH-820, YH-920, and YH-925. Mostly functional. Audio working on 820 & 925 (untested on the 920). No battery readings. No recording. No plugins. Keymap needs work. 2009-05-25 21:10:45 +00:00
as3514.h e200v1/c200v1: Implement limited samplerate switching. Rates 24kHz and below are being a bear as far as minor crackling at higher amplitude-- leave them out for the time being since no solution is currently evident. 48, 44, 32 (rec rates 24, 22, 16) seem perfectly fine. I'm betting c200 is ok to include because it uses the same setup as e200. 2010-06-26 10:07:17 +00:00
as3525.h CCU_BASE+0x20 is specific to AMSv2 -> move to as3525v2.h 2010-07-22 13:07:56 +00:00
as3525v2.h CCU_BASE+0x20 is specific to AMSv2 -> move to as3525v2.h 2010-07-22 13:07:56 +00:00
ascodec.h
at91sam9260.h Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h 2009-06-29 14:30:12 +00:00
ata.h Commit FS#9545, storage cleanup and multi-driver support 2009-07-17 22:28:49 +00:00
ata_idle_notify.h Rockbox as an application: Replace many occurences of #ifdef SIMULATOR with #if (CONFIG_PLATFORM & PLATFORM_HOSTED) (or equivalently). 2010-06-21 16:53:00 +00:00
ata_mmc.h Merge tCardInfo struct (MMC) and tSDCardInfo struct (SD) 2009-07-01 10:07:22 +00:00
audio.h Ged rid of uisimulator/common/io.c for android builds. 2010-09-01 21:29:34 +00:00
audiohw.h android: declare audiohw_set_volume() 2010-08-03 17:53:38 +00:00
backlight-sw-fading.h
backlight.h FS#10756 - Free unused init code 2010-03-03 23:20:32 +00:00
bidi.h
bitswap.h
bootchart.h bootchart.h doesn't need _ansi.h, especially not in a relative path 2010-07-25 15:28:24 +00:00
buffer.h Unify 32mb and 64mb ipod video builds - FS#11580 2010-08-31 19:06:04 +00:00
button.h FS#10756 - Free unused init code 2010-03-03 23:20:32 +00:00
config.h Ged rid of uisimulator/common/io.c for android builds. 2010-09-01 21:29:34 +00:00
config_caps.h
cpu.h FS#10047 : Clipv2 2009-12-31 19:15:20 +00:00
debug.h Revert an accidentaly change to debug.h that prevent simulator+debug build 2010-09-01 21:11:20 +00:00
disk.h Make disk_init() non-static again. I forgot to look at the bootloaders 2010-06-06 13:28:13 +00:00
dm320.h M:Robe 500: Add support for DMA based LCD updates when in Portrait mode. TestFPS measures 190 FPS with the DMA updates vs. 58 FPS for the non-DMA updates. 2009-08-20 00:36:39 +00:00
ds2411.h
eeprom_24cxx.h
eeprom_settings.h
enc_base.h
events.h FS#11263 - Radio Art support! %C and %Cl tags work in the radio screen and Base Skin when the radio is running. 2010-05-16 11:13:42 +00:00
fat.h FS#11118: reduce the number of cached sector in FAT code because some are useless after a rewrite of LFN entries handling. Also makes LFN handling more robust. 2010-03-22 10:35:25 +00:00
filefuncs.h struct DIR -> DIR, should fix most if not all reds. 2010-09-01 21:45:58 +00:00
fmradio.h
fmradio_i2c.h mark some functions as init functions (discarded after init() has run) 2010-05-27 12:00:29 +00:00
font.h change get_glyph_size() to font_glyphs_to_bufsize(). fixes a bug when font glyph buffer < font header 2010-08-27 18:25:23 +00:00
gdb_api.h
general.h Simplify mpegplayer a bit and use array-based lists rather than linked lists for stream management. Move a couple useful functions to handle pointer arrays from kernel.c into general.c; mpeglayer now makes use of them. 2010-05-17 12:34:05 +00:00
generic_i2c.h Apply FS #11423 - Use udelay in AMS driver for FM radio I2C 2010-06-21 21:41:07 +00:00
hangul.h
hd66789r.h
hwcompat.h Rockbox as an application: Replace many occurences of #ifdef SIMULATOR with #if (CONFIG_PLATFORM & PLATFORM_HOSTED) (or equivalently). 2010-06-21 16:53:00 +00:00
i2c-coldfire.h Fix more tabs 2010-01-03 10:27:43 +00:00
i2c-pp.h Move private #defines from i2c-pp.h to i2c-pp.c 2009-05-21 14:31:47 +00:00
i2c-s5l8700.h S5L8700: implement i2c driver (used for communicating with the RTC and the codec in the meizus) 2009-06-27 20:11:11 +00:00
i2c.h
i2s.h
iap.h Clean up IAP / ipod remote tuner a bit. 2010-04-18 15:46:56 +00:00
ifp_usb_serial.h
imx31l.h Gigabeat S: Implement LCD contrast, invert and flip modes. Enhance LCD power management. Include init data but it's not needed yet (identical to Gigabeat F). 2010-05-18 23:50:00 +00:00
ipod_remote_tuner.h ipod fm remote: some static/const fixes from FS #11266 by me 2010-08-23 20:49:33 +00:00
isp1362.h
isp1583.h Correct svn:keywords and svn:eol-style on a few more files. 2009-07-12 09:43:44 +00:00
jz4740-codec.h Fix yellow 2009-05-26 23:28:53 +00:00
jz4740.h Ingenic Jz4740: add basic frequency switching 2009-07-03 21:34:40 +00:00
jz_mxu.h
kernel.h Ged rid of uisimulator/common/io.c for android builds. 2010-09-01 21:29:34 +00:00
lcd-charcell.h
lcd-remote.h Implement lcd(_remote)_putsxyf() and export to plugins 2010-08-28 21:46:18 +00:00
lcd.h Implement lcd(_remote)_putsxyf() and export to plugins 2010-08-28 21:46:18 +00:00
led.h
load_code.h Change lc_open_from_mem() return type to void* 2010-08-30 20:47:26 +00:00
logf.h Move some gcc extensions to new gcc_extensions.h header 2010-07-25 14:44:29 +00:00
ltv350qv.h
lv24020lp.h FM tuner region code cleanup - FS #11492 by me. 2010-07-26 20:15:16 +00:00
m5636.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
m66591.h Correct svn:keywords and svn:eol-style on a few more files. 2009-07-12 09:43:44 +00:00
mas.h Fix more tabs 2010-01-03 10:27:43 +00:00
mas35xx.h
mc13783.h i.MX31/Gigabeat S: Actually enable DPTC which can set optimal voltage for 528MHz. Requires an SPI and PMIC interface rework because of the low-latency needs for the DPTC to work best with minimal panicing. SPI can work with multitasking and asynchronously from interrupt handlers or normal code. 2010-05-04 10:07:53 +00:00
mcf5249.h Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h 2009-06-29 14:30:12 +00:00
mcf5250.h
mips-archdefs.h
mips.h
mipsregs.h
mmc.h Commit FS#9545, storage cleanup and multi-driver support 2009-07-17 22:28:49 +00:00
mp3_playback.h
mv.h Commit FS#9545, storage cleanup and multi-driver support 2009-07-17 22:28:49 +00:00
nand.h Core changes to allow storage drivers to do cleanup on shutdown, and iPod Nano 2G shutdown code rework (FS#10668) 2009-10-09 20:36:09 +00:00
nand_id.h Correct svn:keywords and svn:eol-style on a few more files. 2009-07-12 09:43:44 +00:00
ohci.h Add data structures 2009-07-12 15:29:22 +00:00
panic.h Move some gcc extensions to new gcc_extensions.h header 2010-07-25 14:44:29 +00:00
pcf5060x.h D2: Use a common function for reading ADC values from the PMU 2009-10-08 15:47:43 +00:00
pcf5063x.h Initial support for runtime detection of the PMU used in newer D2+ models (PCF50635). The backlight and battery monitoring should work, but the RTC and touchscreen are not yet implemented. 2009-10-10 17:35:02 +00:00
pcf50605.h
pcf50606.h D2: Use a common function for reading ADC values from the PMU 2009-10-08 15:47:43 +00:00
pcf50635.h Initial support for runtime detection of the PMU used in newer D2+ models (PCF50635). The backlight and battery monitoring should work, but the RTC and touchscreen are not yet implemented. 2009-10-10 17:35:02 +00:00
pcm.h e200v1/c200v1: Implement limited samplerate switching. Rates 24kHz and below are being a bear as far as minor crackling at higher amplitude-- leave them out for the time being since no solution is currently evident. 48, 44, 32 (rec rates 24, 22, 16) seem perfectly fine. I'm betting c200 is ok to include because it uses the same setup as e200. 2010-06-26 10:07:17 +00:00
pcm_sampr.h Should clear up rest of red. Add a required #define in the config for c200. Fix up some preprocessing directives. Hope it's all taken care of now. 2010-06-26 10:37:41 +00:00
pl081.h
pl180.h AMS Sansa: Add voltage defines to pl180.h. No functional changes. 2009-10-19 05:34:17 +00:00
pnx0101.h Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h 2009-06-29 14:30:12 +00:00
power.h Rockbox as an application: Replace many occurences of #ifdef SIMULATOR with #if (CONFIG_PLATFORM & PLATFORM_HOSTED) (or equivalently). 2010-06-21 16:53:00 +00:00
powermgmt.h Rockbox as an application: Replace many occurences of #ifdef SIMULATOR with #if (CONFIG_PLATFORM & PLATFORM_HOSTED) (or equivalently). 2010-06-21 16:53:00 +00:00
pp5002.h Move CACHEALIGN_BITS to cpu headers 2010-04-13 15:50:08 +00:00
pp5020.h Move CACHEALIGN_BITS to cpu headers 2010-04-13 15:50:08 +00:00
pp5024.h
pp6100.h Add information gleaned from disassembling the main firmware image. Detect lcd type in use. Still no actual output 2009-07-17 20:40:40 +00:00
profile.h
qt1106.h
r61509.h Onda VX7x7: fix error when compiling with USB_BOOT defined 2009-07-29 12:57:42 +00:00
ramdisk.h Commit FS#9545, storage cleanup and multi-driver support 2009-07-17 22:28:49 +00:00
rbpaths.h Rockbox as an application: add get_user_file_path(). 2010-08-01 16:15:27 +00:00
rda5802.h FM tuner region code cleanup - FS #11492 by me. 2010-07-26 20:15:16 +00:00
rolo.h
rtc.h rtc_enable_alarm() needs no return value 2010-05-22 00:28:26 +00:00
s1a0903x01.h
s3c2440.h s5l870x : use mmu-arm.S 2010-04-13 15:59:49 +00:00
s5l8700.h Move CACHEALIGN_BITS to cpu headers 2010-04-13 15:50:08 +00:00
screendump.h
scroll_engine.h FS#10756 - Free unused init code 2010-03-03 23:20:32 +00:00
sd.h Remove card_enable_monitoring() and use a mutex instead. The card_enable_monitoring() method actually didn't eliminate the possible race conditions it was meant to fix. 2010-06-06 13:20:47 +00:00
sdmmc.h Remove card_enable_monitoring() and use a mutex instead. The card_enable_monitoring() method actually didn't eliminate the possible race conditions it was meant to fix. 2010-06-06 13:20:47 +00:00
serial.h
sh7034.h Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h 2009-06-29 14:30:12 +00:00
si4700.h FM tuner region code cleanup - FS #11492 by me. 2010-07-26 20:15:16 +00:00
sound.h Gigabeat S: Fully enable access to hardware tone controls and 3-D effect feature. Under the hood, it's designated a hardware equalizer since it is one. Implement code framework for hardware EQ in general. Menu aspect is well abstracted and so the UI and strings can be changed around if taste doesn't quite suit. So far the emphasis is distinction of the UI labelling from the software EQ so that it's clear the settings are for a different thing. 2010-05-15 13:09:45 +00:00
spdif.h
spi.h Correct svn:keywords and svn:eol-style on a few more files. 2009-07-12 09:43:44 +00:00
storage.h Fix typo 2010-09-02 03:53:09 +00:00
structec.h
sw_i2c.h
synaptics-mep.h hdd6330: change the synaptics-mep driver in a few places according to the touchpad behavior. 2010-07-04 12:03:38 +00:00
system.h Move some gcc extensions to new gcc_extensions.h header 2010-07-25 14:44:29 +00:00
tcc77x.h TCC: Implement ECC error correction for sectors read from NAND. Tested on D2 (78x, MLC) and M200 (77x, SLC). 2009-08-12 19:26:04 +00:00
tcc780x.h D2: Enable ARM cache coherency functions (eg. during codec load), which should eliminate data aborts/freezes on track changes. NOTE: The linker script reserves space at the end of DRAM for the TTB, but this is not currently used. 2009-09-01 21:35:37 +00:00
tea5760.h FM tuner region code cleanup - FS #11492 by me. 2010-07-26 20:15:16 +00:00
tea5767.h FM tuner region code cleanup - FS #11492 by me. 2010-07-26 20:15:16 +00:00
thread.h Introduce NORETURN_ATTR wrapper for __attribute__((noreturn)), using this and a bit further cleanup in main gets rid of a warning when compiling for android. 2010-08-12 13:38:25 +00:00
timer.h Rockbox as an application: Replace many occurences of #ifdef SIMULATOR with #if (CONFIG_PLATFORM & PLATFORM_HOSTED) (or equivalently). 2010-06-21 16:53:00 +00:00
tlv320.h
touchscreen.h Remove svn:executable from firmware 2009-10-31 02:26:40 +00:00
tsc200x.h Touchscreen support for newer Cowon D2+ hardware revisions (using TSC200x touchscreen controller). 2009-10-15 20:13:29 +00:00
tsc2100.h Correct svn:keywords and svn:eol-style on a few more files. 2009-07-12 09:43:44 +00:00
tuner.h FM tuner region code cleanup - FS #11492 by me. 2010-07-26 20:15:16 +00:00
uda1341.h Improvements to mini2440/UDA1341 audio 2009-11-01 22:58:08 +00:00
uda1380.h Fix more tabs 2010-01-03 10:27:43 +00:00
udacodec.h Create an udacodec interface (similar to ascodec and wmcoded) and adapt/implement it for the iriver h1xx/h3xx and the meizus. 2009-06-28 17:43:04 +00:00
usb-s3c6400x.h iPod Nano 2G USB support based on the S3C6400X datasheet. Disabled by default for now. 2009-10-20 06:37:07 +00:00
usb-tcc.h Fix more tabs 2010-01-03 10:27:43 +00:00
usb.h New USB charging system, part 2 - "Force" charging mode 2010-06-05 20:43:30 +00:00
usb_ch9.h Fix more tabs 2010-01-03 10:27:43 +00:00
usb_core.h New USB charging system, part 1 - API rework and user-visible setting update 2010-06-05 10:05:27 +00:00
usb_drv.h Fix red: Revert the const correctness part, which opened a can of worms. 2010-08-12 08:43:18 +00:00
wm8731.h
wm8751.h WM8750 - add ALC and NGAT related low level functions (disabled now by default) 2010-07-27 20:57:33 +00:00
wm8758.h Submit FS#11065. Introduce a new system setting for en-/disabling the Line-out. For now only implemented on iPod Video. This allows to save power if the user does not use the player's Line-out. On iPod 5G the saving is ~0.5 mA. 2010-03-20 15:02:29 +00:00
wm8975.h
wm8978.h Gigabeat S: Fully enable access to hardware tone controls and 3-D effect feature. Under the hood, it's designated a hardware equalizer since it is one. Implement code framework for hardware EQ in general. Menu aspect is well abstracted and so the UI and strings can be changed around if taste doesn't quite suit. So far the emphasis is distinction of the UI labelling from the software EQ so that it's clear the settings are for a different thing. 2010-05-15 13:09:45 +00:00
wm8985.h Submit FS#11240 by Raphael Jakse. Allows to reduce volume on WM8985 to -89 dB (e.g. used for Cowon D2). Below -57 dB the line out is affected. The manual is updated accordingly. 2010-05-30 18:29:04 +00:00
wmcodec.h