Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
rockbox/firmware/export
History
Tomer Shalev 4f3d7b5bcb USB HID: Use different context for each mode; Use constant for each action; 
Rework keymaps

This commit makes the code neater and more readable. It makes it easier to
modify keymap assignments and new keypad modes.
Some platforms had their keypad mappings reworked.
The manual is updated to reflect all these changes.
H10 remote control mapping dropped.


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23219 a1c6a512-1295-4272-9138-f99709370657
2009-10-17 05:39:54 +00:00
..
adc.h
ak4537.h 3 new ports: Samsung YH-820, YH-920, and YH-925. Mostly functional. Audio working on 820 & 925 (untested on the 920). No battery readings. No recording. No plugins. Keymap needs work. 2009-05-25 21:10:45 +00:00
akcodec.h 3 new ports: Samsung YH-820, YH-920, and YH-925. Mostly functional. Audio working on 820 & 925 (untested on the 920). No battery readings. No recording. No plugins. Keymap needs work. 2009-05-25 21:10:45 +00:00
as3514.h FS#9611 - Sansa Clip radio code. Commit final part which enables the LINE2 input that carries the analog radio signal on ams sansas. 2009-02-05 19:57:18 +00:00
as3525.h Speed up the Fuze's LCD by a factor of ~2.1 (lcd_update()) by using 32bit transfers when possible. 2009-08-31 15:54:25 +00:00
ascodec.h
at91sam9260.h Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h 2009-06-29 14:30:12 +00:00
ata.h Commit FS#9545, storage cleanup and multi-driver support 2009-07-17 22:28:49 +00:00
ata_idle_notify.h CONFIG_NAND is not a bitfield 2009-10-04 02:17:54 +00:00
ata_mmc.h Merge tCardInfo struct (MMC) and tSDCardInfo struct (SD) 2009-07-01 10:07:22 +00:00
audio.h FS9795 - some playback cleanup. 2009-04-06 00:39:43 +00:00
audiohw.h 3 new ports: Samsung YH-820, YH-920, and YH-925. Mostly functional. Audio working on 820 & 925 (untested on the 920). No battery readings. No recording. No plugins. Keymap needs work. 2009-05-25 21:10:45 +00:00
backlight-sw-fading.h Get rid of the last "backlight thread fading" remnant, and of the calculation of the delay. It actually wasn't more than those 3 cases before anyway. 2009-03-11 21:10:17 +00:00
backlight.h Remove the calls to backlight_lcd_sleep_countdown from target specific code and move it into backlight.c 2009-04-26 01:23:39 +00:00
bidi.h
bitswap.h
buffer.h
button.h Fix red: Invert buttons in RTL mode 2009-10-05 17:53:45 +00:00
config-c100.h move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! ) 2009-09-06 17:12:09 +00:00
config-c200.h Commit "FS#10468 - USB HID: Show keypad mode on screen" 2009-09-30 10:06:04 +00:00
config-c200v2.h move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! ) 2009-09-06 17:12:09 +00:00
config-clip.h move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! ) 2009-09-06 17:12:09 +00:00
config-cowond2.h D2: The RTC chip needs to be runtime detected. 2009-10-11 17:46:00 +00:00
config-creativezv.h Remove dead or useless defines: HAVE_ONDIO_IC was replaced by CONFIG_I2C but just added not replaced for the OndioFM in errr... r5675. The creativezv* and the m200v4 config files defined CONFIG_I2C twice. 2009-09-19 09:37:14 +00:00
config-creativezvm.h Remove dead or useless defines: HAVE_ONDIO_IC was replaced by CONFIG_I2C but just added not replaced for the OndioFM in errr... r5675. The creativezv* and the m200v4 config files defined CONFIG_I2C twice. 2009-09-19 09:37:14 +00:00
config-creativezvm60gb.h Remove dead or useless defines: HAVE_ONDIO_IC was replaced by CONFIG_I2C but just added not replaced for the OndioFM in errr... r5675. The creativezv* and the m200v4 config files defined CONFIG_I2C twice. 2009-09-19 09:37:14 +00:00
config-e200.h Commit "FS#10468 - USB HID: Show keypad mode on screen" 2009-09-30 10:06:04 +00:00
config-e200v2.h Sansa Fuze & e200v2 : do not enable USBSTACK in the bootloader 2009-10-15 10:23:18 +00:00
config-fmrecorder.h Move Archos battery runtime estimation defines into config files instead of powermgmt.h. Replace old default values (which were actually the Archos Player currents) with a new default (1mA). This should give nonsense runtime estimates (instead of semi-reasonable but completely wrong estimates) on all players that do not have a battery current defined. Hopefully this will remind people that they should define the battery current when they start a new port. 2009-06-29 18:32:43 +00:00
config-fuze.h Sansa Fuze & e200v2 : do not enable USBSTACK in the bootloader 2009-10-15 10:23:18 +00:00
config-gigabeat-s.h Gigabeat S: Add support for dumping the flash from debug menu 2009-10-16 16:08:11 +00:00
config-gigabeat.h move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! ) 2009-09-06 17:12:09 +00:00
config-h10.h USB HID: Use different context for each mode; Use constant for each action; 2009-10-17 05:39:54 +00:00
config-h10_5gb.h USB HID: Use different context for each mode; Use constant for each action; 2009-10-17 05:39:54 +00:00
config-h100.h LCD_DEPTH == 2, vertical packing: specify if lcd framebuffer is in iram into the model specific config file 2009-08-18 04:24:01 +00:00
config-h120.h LCD_DEPTH == 2, vertical packing: specify if lcd framebuffer is in iram into the model specific config file 2009-08-18 04:24:01 +00:00
config-h300.h move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! ) 2009-09-06 17:12:09 +00:00
config-hdd1630.h Commit "FS#10468 - USB HID: Show keypad mode on screen" 2009-09-30 10:06:04 +00:00
config-iaudio7.h move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! ) 2009-09-06 17:12:09 +00:00
config-iaudiom3.h LCD_DEPTH == 2, vertical interleaved : specify if lcd framebuffer is in iram into the model specific config file 2009-08-18 04:23:53 +00:00
config-iaudiom5.h move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! ) 2009-09-06 17:12:09 +00:00
config-iaudiox5.h move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! ) 2009-09-06 17:12:09 +00:00
config-ifp7xx.h move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! ) 2009-09-06 17:12:09 +00:00
config-ipod1g2g.h move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! ) 2009-09-06 17:12:09 +00:00
config-ipod3g.h move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! ) 2009-09-06 17:12:09 +00:00
config-ipod4g.h Commit "FS#10468 - USB HID: Show keypad mode on screen" 2009-09-30 10:06:04 +00:00
config-ipodcolor.h Commit "FS#10468 - USB HID: Show keypad mode on screen" 2009-09-30 10:06:04 +00:00
config-ipodmini.h Commit "FS#10468 - USB HID: Show keypad mode on screen" 2009-09-30 10:06:04 +00:00
config-ipodmini2g.h Commit "FS#10468 - USB HID: Show keypad mode on screen" 2009-09-30 10:06:04 +00:00
config-ipodnano.h Commit "FS#10468 - USB HID: Show keypad mode on screen" 2009-09-30 10:06:04 +00:00
config-ipodnano2g.h The Nano2G also qualifies for HAVE_WHEEL_POSITION 2009-10-13 20:36:21 +00:00
config-ipodvideo.h Commit "FS#10468 - USB HID: Show keypad mode on screen" 2009-09-30 10:06:04 +00:00
config-logikdax.h move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! ) 2009-09-06 17:12:09 +00:00
config-lyre_proto1.h Make JPEG and BMP scaler optional with HAVE_JPEG and HAVE_BMP_SCALING, both defined for all targets that have HAVE_ALBUMART. Disable JPEG in PictureFlow and pluginlib album art search with 32KiB plugin buffer until PictureFlow 2009-05-04 15:46:41 +00:00
config-m200.h move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! ) 2009-09-06 17:12:09 +00:00
config-m200v4.h Remove dead or useless defines: HAVE_ONDIO_IC was replaced by CONFIG_I2C but just added not replaced for the OndioFM in errr... r5675. The creativezv* and the m200v4 config files defined CONFIG_I2C twice. 2009-09-19 09:37:14 +00:00
config-meizu-m3.h move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! ) 2009-09-06 17:12:09 +00:00
config-meizu-m6sl.h move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! ) 2009-09-06 17:12:09 +00:00
config-meizu-m6sp.h move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! ) 2009-09-06 17:12:09 +00:00
config-mrobe100.h USB HID: Use different context for each mode; Use constant for each action; 2009-10-17 05:39:54 +00:00
config-mrobe500.h M:Robe 500: Add support for more audio frequencies, initialize and set the touchscreen PWD pin. 2009-10-11 06:08:14 +00:00
config-ondavx747.h move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! ) 2009-09-06 17:12:09 +00:00
config-ondavx767.h move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! ) 2009-09-06 17:12:09 +00:00
config-ondiofm.h Remove dead or useless defines: HAVE_ONDIO_IC was replaced by CONFIG_I2C but just added not replaced for the OndioFM in errr... r5675. The creativezv* and the m200v4 config files defined CONFIG_I2C twice. 2009-09-19 09:37:14 +00:00
config-ondiosp.h move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! ) 2009-09-06 17:12:09 +00:00
config-player.h Move Archos battery runtime estimation defines into config files instead of powermgmt.h. Replace old default values (which were actually the Archos Player currents) with a new default (1mA). This should give nonsense runtime estimates (instead of semi-reasonable but completely wrong estimates) on all players that do not have a battery current defined. Hopefully this will remind people that they should define the battery current when they start a new port. 2009-06-29 18:32:43 +00:00
config-recorder.h Move Archos battery runtime estimation defines into config files instead of powermgmt.h. Replace old default values (which were actually the Archos Player currents) with a new default (1mA). This should give nonsense runtime estimates (instead of semi-reasonable but completely wrong estimates) on all players that do not have a battery current defined. Hopefully this will remind people that they should define the battery current when they start a new port. 2009-06-29 18:32:43 +00:00
config-recorderv2.h Move Archos battery runtime estimation defines into config files instead of powermgmt.h. Replace old default values (which were actually the Archos Player currents) with a new default (1mA). This should give nonsense runtime estimates (instead of semi-reasonable but completely wrong estimates) on all players that do not have a battery current defined. Hopefully this will remind people that they should define the battery current when they start a new port. 2009-06-29 18:32:43 +00:00
config-sa9200.h Commit "FS#10468 - USB HID: Show keypad mode on screen" 2009-09-30 10:06:04 +00:00
config-tpj1022.h move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! ) 2009-09-06 17:12:09 +00:00
config-view.h move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! ) 2009-09-06 17:12:09 +00:00
config-yh820.h move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! ) 2009-09-06 17:12:09 +00:00
config-yh920.h move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! ) 2009-09-06 17:12:09 +00:00
config-yh925.h move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! ) 2009-09-06 17:12:09 +00:00
config-yps3.h move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! ) 2009-09-06 17:12:09 +00:00
config.h D2: The RTC chip needs to be runtime detected. 2009-10-11 17:46:00 +00:00
config_caps.h
cpu.h Introduce S5L8701 CONFIG_CPU definition for Nano2G and a new CPU_S5L870X "family" define - the 8700 and 8701 are proving to be different. Also move all the cpu-specific defines earlier in config.h 2009-07-15 21:34:31 +00:00
debug.h
disk.h Commit FS#9545, storage cleanup and multi-driver support 2009-07-17 22:28:49 +00:00
dm320.h M:Robe 500: Add support for DMA based LCD updates when in Portrait mode. TestFPS measures 190 FPS with the DMA updates vs. 58 FPS for the non-DMA updates. 2009-08-20 00:36:39 +00:00
ds2411.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
eeprom_24cxx.h Various files: make function implementations consistent with their declaration in the header file or static if 2009-01-31 23:51:11 +00:00
eeprom_settings.h
enc_base.h
events.h
fat.h Patch #1 from FS#10633 (Nano 2G developments) by Michael Sparmann - Allows targets to set a different sector size than 512 for the storage system. Should not affect any other target. 2009-10-02 16:41:55 +00:00
fmradio.h
fmradio_i2c.h
font.h Get rid of some of the code duplication from checkwps, it still duplicates a lot though. 2009-09-13 13:40:58 +00:00
gdb_api.h
general.h Move screendump from apps to firmware, solving two nasty firmware-to-apps calls. This required to move the filename creation functions as well. * Fix bug in the BMP header of Clip screendumps. * Add remote screendump for targets with an LCD remote. * Simplify some ifdefs and rename a macro in the sim. 2009-02-10 23:43:37 +00:00
generic_i2c.h Simplify generic_i2c, removing the link between i2c address and i2c interface, adding the concept of an i2c bus index. 2009-03-03 18:00:17 +00:00
hangul.h
hd66789r.h
hotswap.h add firmware/driver/sd.c which contains common code between SD drivers 2009-07-01 21:49:13 +00:00
hwcompat.h
i2c-coldfire.h
i2c-pp.h Move private #defines from i2c-pp.h to i2c-pp.c 2009-05-21 14:31:47 +00:00
i2c-s5l8700.h S5L8700: implement i2c driver (used for communicating with the RTC and the codec in the meizus) 2009-06-27 20:11:11 +00:00
i2c.h
i2s.h
iap.h Correct svn:keywords and svn:eol-style on a few more files. 2009-07-12 09:43:44 +00:00
ifp_usb_serial.h
imx31l.h Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h 2009-06-29 14:30:12 +00:00
isp1362.h
isp1583.h Correct svn:keywords and svn:eol-style on a few more files. 2009-07-12 09:43:44 +00:00
jz4740-codec.h Fix yellow 2009-05-26 23:28:53 +00:00
jz4740.h Ingenic Jz4740: add basic frequency switching 2009-07-03 21:34:40 +00:00
jz_mxu.h
kernel.h Guard the Timeout API declarations with the correct #ifdef 2009-07-14 20:04:26 +00:00
lcd-charcell.h
lcd-remote.h Latest work on the bmp on-load scaler: 2008-12-26 07:03:22 +00:00
lcd.h RTL: Cosmetic changes, no functional change - Rename constants 2009-10-11 20:15:22 +00:00
led.h
logf.h A new implementation of logf, logfdisplay and logfdump. 2009-08-21 22:54:23 +00:00
ltv350qv.h
lv24020lp.h
m5636.h
m66591.h Correct svn:keywords and svn:eol-style on a few more files. 2009-07-12 09:43:44 +00:00
mas.h FS#9157 - Tidy up some MAS35XX constants 2009-10-01 05:25:20 +00:00
mas35xx.h
mc13783.h imx31/mc13783: Do some housekeeping with register macros, function names and other defines. No functional changes (except to alter a couple int priorities). 2009-03-22 01:50:48 +00:00
mcf5249.h Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h 2009-06-29 14:30:12 +00:00
mcf5250.h
mips-archdefs.h Onda VX747: 2009-02-16 22:49:58 +00:00
mips.h Onda VX747: 2009-02-16 22:49:58 +00:00
mipsregs.h Onda VX747: 2009-02-16 22:49:58 +00:00
mmc.h Commit FS#9545, storage cleanup and multi-driver support 2009-07-17 22:28:49 +00:00
mp3_playback.h
mv.h Commit FS#9545, storage cleanup and multi-driver support 2009-07-17 22:28:49 +00:00
nand.h Core changes to allow storage drivers to do cleanup on shutdown, and iPod Nano 2G shutdown code rework (FS#10668) 2009-10-09 20:36:09 +00:00
nand_id.h Correct svn:keywords and svn:eol-style on a few more files. 2009-07-12 09:43:44 +00:00
ohci.h Add data structures 2009-07-12 15:29:22 +00:00
panic.h
pcf5060x.h D2: Use a common function for reading ADC values from the PMU 2009-10-08 15:47:43 +00:00
pcf5063x.h Initial support for runtime detection of the PMU used in newer D2+ models (PCF50635). The backlight and battery monitoring should work, but the RTC and touchscreen are not yet implemented. 2009-10-10 17:35:02 +00:00
pcf50605.h
pcf50606.h D2: Use a common function for reading ADC values from the PMU 2009-10-08 15:47:43 +00:00
pcf50635.h Initial support for runtime detection of the PMU used in newer D2+ models (PCF50635). The backlight and battery monitoring should work, but the RTC and touchscreen are not yet implemented. 2009-10-10 17:35:02 +00:00
pcm.h Gigabeat S: Implement an SDMA API and use it in the PCM driver. Some other miscellaneous adjustments to recording and PCM buffer to accomodate use of physical addresses and cache coherency. 2009-02-08 22:32:41 +00:00
pcm_sampr.h
pl081.h
pl180.h
pnx0101.h Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h 2009-06-29 14:30:12 +00:00
power.h
powermgmt.h 1 mA gets rounded to 0 during computation, so use 2 mA as the default. 2009-06-29 21:40:03 +00:00
pp5002.h Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h 2009-06-29 14:30:12 +00:00
pp5020.h Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h 2009-06-29 14:30:12 +00:00
pp5024.h
pp6100.h Add information gleaned from disassembling the main firmware image. Detect lcd type in use. Still no actual output 2009-07-17 20:40:40 +00:00
profile.h
qt1106.h
r61509.h Onda VX7x7: fix error when compiling with USB_BOOT defined 2009-07-29 12:57:42 +00:00
ramdisk.h Commit FS#9545, storage cleanup and multi-driver support 2009-07-17 22:28:49 +00:00
rolo.h Updated our source code header to explicitly mention that we are GPL v2 or 2008-06-28 18:10:04 +00:00
rtc.h FS#10569 RTC driver cleanup 2009-09-26 14:58:32 +00:00
s1a0903x01.h
s3c2440.h Remove OHCI registers from s3c2440.h and move them to their own header. Since s3c2440 seems to be very close to the OHCI spec, there's no reason not to use a generic driver 2009-07-12 15:01:10 +00:00
s5l8700.h iPod Nano 2G PMU rework, added backlight brightness setting and USB charging speed setting 2009-10-11 18:20:56 +00:00
screendump.h Fix the Playersim as well. 2009-02-11 00:10:35 +00:00
scroll_engine.h Const police raid\! 2009-09-04 16:04:02 +00:00
sd.h Commit FS#9545, storage cleanup and multi-driver support 2009-07-17 22:28:49 +00:00
serial.h
sh7034.h Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h 2009-06-29 14:30:12 +00:00
si4700.h
sound.h * Move DSP_CALLBACK_* enum to sound.h 2009-08-01 21:38:18 +00:00
spdif.h
spi.h Correct svn:keywords and svn:eol-style on a few more files. 2009-07-12 09:43:44 +00:00
storage.h Core changes to allow storage drivers to do cleanup on shutdown, and iPod Nano 2G shutdown code rework (FS#10668) 2009-10-09 20:36:09 +00:00
structec.h
sw_i2c.h
synaptics-mep.h Clean up the Synaptics touchpad driver. 2009-06-19 02:48:15 +00:00
system.h fix checkwps breakage caused by r229900 2009-10-06 22:02:06 +00:00
tcc77x.h TCC: Implement ECC error correction for sectors read from NAND. Tested on D2 (78x, MLC) and M200 (77x, SLC). 2009-08-12 19:26:04 +00:00
tcc780x.h D2: Enable ARM cache coherency functions (eg. during codec load), which should eliminate data aborts/freezes on track changes. NOTE: The linker script reserves space at the end of DRAM for the TTB, but this is not currently used. 2009-09-01 21:35:37 +00:00
tea5760.h Meizu: implement i2c for the meizu fmradio and update the tea5760 tuner driver 2009-07-07 21:57:16 +00:00
tea5767.h
thread.h MIPS: don't save gp register when switching threads 2009-05-06 19:51:34 +00:00
timer.h Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h 2009-06-29 14:30:12 +00:00
tlv320.h cleanup audiohw_set_frequency by adding it to audiohw.h and removing it from all driver .h files 2009-01-20 22:55:10 +00:00
touchscreen.h Touchscreen targets: add calibration screen + rewrite calibration driver (FS#10295) 2009-06-16 17:04:47 +00:00
tsc200x.h Touchscreen support for newer Cowon D2+ hardware revisions (using TSC200x touchscreen controller). 2009-10-15 20:13:29 +00:00
tsc2100.h Correct svn:keywords and svn:eol-style on a few more files. 2009-07-12 09:43:44 +00:00
tuner.h FS#9824: Fix FM channel spacing for Europe 2009-09-24 22:05:07 +00:00
uda1380.h cleanup audiohw_set_frequency by adding it to audiohw.h and removing it from all driver .h files 2009-01-20 22:55:10 +00:00
udacodec.h Create an udacodec interface (similar to ascodec and wmcoded) and adapt/implement it for the iriver h1xx/h3xx and the meizus. 2009-06-28 17:43:04 +00:00
usb-tcc.h
usb.h Philips SA9200: Working touchpad and button lights! Also, improvements to the keymap (still needs work). 2009-06-19 03:23:38 +00:00
usb_ch9.h reorganise usb_core.c a bit, to make the code more readable and more maintainable (FS#10150 by Tomer Shalev)) 2009-04-19 19:53:32 +00:00
usb_core.h Reorganise USB stack defines. Now config.h decides which class drivers get enabled instead of usb_core.h 2009-05-23 14:30:20 +00:00
usb_drv.h Add working USB HID driver, by Tomer Shalev (part of his GSoC work). 2009-05-16 15:30:09 +00:00
wm8731.h cleanup audiohw_set_frequency by adding it to audiohw.h and removing it from all driver .h files 2009-01-20 22:55:10 +00:00
wm8751.h cleanup audiohw_set_frequency by adding it to audiohw.h and removing it from all driver .h files 2009-01-20 22:55:10 +00:00
wm8758.h FS#10086 - Playback and recording sample rate setting on the 5G iPod 2009-04-06 02:46:42 +00:00
wm8975.h cleanup audiohw_set_frequency by adding it to audiohw.h and removing it from all driver .h files 2009-01-20 22:55:10 +00:00
wm8978.h cleanup audiohw_set_frequency by adding it to audiohw.h and removing it from all driver .h files 2009-01-20 22:55:10 +00:00
wm8985.h D2: Enable FM radio (based on FS#10035 by Michael Burtin with some changes by myself). Also updates the LV24020 driver to add optional logf debugging. 2009-03-21 00:13:20 +00:00
wmcodec.h