| .. |
|
adc.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
ak4537.h
|
3 new ports: Samsung YH-820, YH-920, and YH-925. Mostly functional. Audio working on 820 & 925 (untested on the 920). No battery readings. No recording. No plugins. Keymap needs work.
|
2009-05-25 21:10:45 +00:00 |
|
akcodec.h
|
3 new ports: Samsung YH-820, YH-920, and YH-925. Mostly functional. Audio working on 820 & 925 (untested on the 920). No battery readings. No recording. No plugins. Keymap needs work.
|
2009-05-25 21:10:45 +00:00 |
|
as3514.h
|
FS#9611 - Sansa Clip radio code. Commit final part which enables the LINE2 input that carries the analog radio signal on ams sansas.
|
2009-02-05 19:57:18 +00:00 |
|
as3525.h
|
Speed up the Fuze's LCD by a factor of ~2.1 (lcd_update()) by using 32bit transfers when possible.
|
2009-08-31 15:54:25 +00:00 |
|
ascodec.h
|
Oops, fix red - only include ascodec-target.h when HAVE_AS3514 is defined
|
2008-10-31 00:37:58 +00:00 |
|
at91sam9260.h
|
Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h
|
2009-06-29 14:30:12 +00:00 |
|
ata.h
|
Commit FS#9545, storage cleanup and multi-driver support
|
2009-07-17 22:28:49 +00:00 |
|
ata_idle_notify.h
|
Correct wrong usage of event callbacks all over the place. It's not supposed to return anything, and should take a data parameter.
|
2009-10-20 21:54:44 +00:00 |
|
ata_mmc.h
|
Merge tCardInfo struct (MMC) and tSDCardInfo struct (SD)
|
2009-07-01 10:07:22 +00:00 |
|
audio.h
|
FS9795 - some playback cleanup.
|
2009-04-06 00:39:43 +00:00 |
|
audiohw.h
|
3 new ports: Samsung YH-820, YH-920, and YH-925. Mostly functional. Audio working on 820 & 925 (untested on the 920). No battery readings. No recording. No plugins. Keymap needs work.
|
2009-05-25 21:10:45 +00:00 |
|
backlight-sw-fading.h
|
Get rid of the last "backlight thread fading" remnant, and of the calculation of the delay. It actually wasn't more than those 3 cases before anyway.
|
2009-03-11 21:10:17 +00:00 |
|
backlight.h
|
Remove the calls to backlight_lcd_sleep_countdown from target specific code and move it into backlight.c
|
2009-04-26 01:23:39 +00:00 |
|
bidi.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
bitswap.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
buffer.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
button.h
|
Fix red: Invert buttons in RTL mode
|
2009-10-05 17:53:45 +00:00 |
|
config-c100.h
|
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
|
2009-09-06 17:12:09 +00:00 |
|
config-c200.h
|
Commit "FS#10468 - USB HID: Show keypad mode on screen"
|
2009-09-30 10:06:04 +00:00 |
|
config-c200v2.h
|
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
|
2009-09-06 17:12:09 +00:00 |
|
config-clip.h
|
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
|
2009-09-06 17:12:09 +00:00 |
|
config-cowond2.h
|
D2 should have HAVE_USB_POWER defined.
|
2009-10-20 20:44:30 +00:00 |
|
config-creativezv.h
|
Remove dead or useless defines: HAVE_ONDIO_IC was replaced by CONFIG_I2C but just added not replaced for the OndioFM in errr... r5675. The creativezv* and the m200v4 config files defined CONFIG_I2C twice.
|
2009-09-19 09:37:14 +00:00 |
|
config-creativezvm.h
|
Remove dead or useless defines: HAVE_ONDIO_IC was replaced by CONFIG_I2C but just added not replaced for the OndioFM in errr... r5675. The creativezv* and the m200v4 config files defined CONFIG_I2C twice.
|
2009-09-19 09:37:14 +00:00 |
|
config-creativezvm60gb.h
|
Remove dead or useless defines: HAVE_ONDIO_IC was replaced by CONFIG_I2C but just added not replaced for the OndioFM in errr... r5675. The creativezv* and the m200v4 config files defined CONFIG_I2C twice.
|
2009-09-19 09:37:14 +00:00 |
|
config-e200.h
|
Commit "FS#10468 - USB HID: Show keypad mode on screen"
|
2009-09-30 10:06:04 +00:00 |
|
config-e200v2.h
|
Sansa Fuze & e200v2 : do not enable USBSTACK in the bootloader
|
2009-10-15 10:23:18 +00:00 |
|
config-fmrecorder.h
|
Move Archos battery runtime estimation defines into config files instead of powermgmt.h. Replace old default values (which were actually the Archos Player currents) with a new default (1mA). This should give nonsense runtime estimates (instead of semi-reasonable but completely wrong estimates) on all players that do not have a battery current defined. Hopefully this will remind people that they should define the battery current when they start a new port.
|
2009-06-29 18:32:43 +00:00 |
|
config-fuze.h
|
Sansa Fuze & e200v2 : do not enable USBSTACK in the bootloader
|
2009-10-15 10:23:18 +00:00 |
|
config-gigabeat-s.h
|
Gigabeat S: Add support for dumping the flash from debug menu
|
2009-10-16 16:08:11 +00:00 |
|
config-gigabeat.h
|
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
|
2009-09-06 17:12:09 +00:00 |
|
config-h10.h
|
USB HID: Add mouse mode to h10
|
2009-10-17 15:20:23 +00:00 |
|
config-h10_5gb.h
|
USB HID: Add mouse mode to h10
|
2009-10-17 15:20:23 +00:00 |
|
config-h100.h
|
LCD_DEPTH == 2, vertical packing: specify if lcd framebuffer is in iram into the model specific config file
|
2009-08-18 04:24:01 +00:00 |
|
config-h120.h
|
LCD_DEPTH == 2, vertical packing: specify if lcd framebuffer is in iram into the model specific config file
|
2009-08-18 04:24:01 +00:00 |
|
config-h300.h
|
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
|
2009-09-06 17:12:09 +00:00 |
|
config-hdd1630.h
|
Commit "FS#10468 - USB HID: Show keypad mode on screen"
|
2009-09-30 10:06:04 +00:00 |
|
config-iaudio7.h
|
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
|
2009-09-06 17:12:09 +00:00 |
|
config-iaudiom3.h
|
LCD_DEPTH == 2, vertical interleaved : specify if lcd framebuffer is in iram into the model specific config file
|
2009-08-18 04:23:53 +00:00 |
|
config-iaudiom5.h
|
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
|
2009-09-06 17:12:09 +00:00 |
|
config-iaudiox5.h
|
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
|
2009-09-06 17:12:09 +00:00 |
|
config-ifp7xx.h
|
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
|
2009-09-06 17:12:09 +00:00 |
|
config-ipod1g2g.h
|
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
|
2009-09-06 17:12:09 +00:00 |
|
config-ipod3g.h
|
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
|
2009-09-06 17:12:09 +00:00 |
|
config-ipod4g.h
|
Commit "FS#10468 - USB HID: Show keypad mode on screen"
|
2009-09-30 10:06:04 +00:00 |
|
config-ipodcolor.h
|
Commit "FS#10468 - USB HID: Show keypad mode on screen"
|
2009-09-30 10:06:04 +00:00 |
|
config-ipodmini.h
|
Commit "FS#10468 - USB HID: Show keypad mode on screen"
|
2009-09-30 10:06:04 +00:00 |
|
config-ipodmini2g.h
|
Commit "FS#10468 - USB HID: Show keypad mode on screen"
|
2009-09-30 10:06:04 +00:00 |
|
config-ipodnano.h
|
Commit "FS#10468 - USB HID: Show keypad mode on screen"
|
2009-09-30 10:06:04 +00:00 |
|
config-ipodnano2g.h
|
iPod Nano 2G: "Fix" the latest PCM issues, channel swap and vinyl popping. The latter is a revert of the cache coherency patch for now, we need to find a better solution in the long term...
|
2009-10-21 18:52:09 +00:00 |
|
config-ipodvideo.h
|
Commit "FS#10468 - USB HID: Show keypad mode on screen"
|
2009-09-30 10:06:04 +00:00 |
|
config-logikdax.h
|
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
|
2009-09-06 17:12:09 +00:00 |
|
config-lyre_proto1.h
|
Make JPEG and BMP scaler optional with HAVE_JPEG and HAVE_BMP_SCALING, both defined for all targets that have HAVE_ALBUMART. Disable JPEG in PictureFlow and pluginlib album art search with 32KiB plugin buffer until PictureFlow
|
2009-05-04 15:46:41 +00:00 |
|
config-m200.h
|
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
|
2009-09-06 17:12:09 +00:00 |
|
config-m200v4.h
|
Remove dead or useless defines: HAVE_ONDIO_IC was replaced by CONFIG_I2C but just added not replaced for the OndioFM in errr... r5675. The creativezv* and the m200v4 config files defined CONFIG_I2C twice.
|
2009-09-19 09:37:14 +00:00 |
|
config-meizu-m3.h
|
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
|
2009-09-06 17:12:09 +00:00 |
|
config-meizu-m6sl.h
|
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
|
2009-09-06 17:12:09 +00:00 |
|
config-meizu-m6sp.h
|
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
|
2009-09-06 17:12:09 +00:00 |
|
config-mini2440.h
|
Initial mini2440 port.
|
2009-10-19 18:14:27 +00:00 |
|
config-mrobe100.h
|
USB HID: Use different context for each mode; Use constant for each action;
|
2009-10-17 05:39:54 +00:00 |
|
config-mrobe500.h
|
M:Robe 500: Add support for more audio frequencies, initialize and set the touchscreen PWD pin.
|
2009-10-11 06:08:14 +00:00 |
|
config-ondavx747.h
|
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
|
2009-09-06 17:12:09 +00:00 |
|
config-ondavx767.h
|
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
|
2009-09-06 17:12:09 +00:00 |
|
config-ondiofm.h
|
Remove dead or useless defines: HAVE_ONDIO_IC was replaced by CONFIG_I2C but just added not replaced for the OndioFM in errr... r5675. The creativezv* and the m200v4 config files defined CONFIG_I2C twice.
|
2009-09-19 09:37:14 +00:00 |
|
config-ondiosp.h
|
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
|
2009-09-06 17:12:09 +00:00 |
|
config-player.h
|
Move Archos battery runtime estimation defines into config files instead of powermgmt.h. Replace old default values (which were actually the Archos Player currents) with a new default (1mA). This should give nonsense runtime estimates (instead of semi-reasonable but completely wrong estimates) on all players that do not have a battery current defined. Hopefully this will remind people that they should define the battery current when they start a new port.
|
2009-06-29 18:32:43 +00:00 |
|
config-recorder.h
|
Move Archos battery runtime estimation defines into config files instead of powermgmt.h. Replace old default values (which were actually the Archos Player currents) with a new default (1mA). This should give nonsense runtime estimates (instead of semi-reasonable but completely wrong estimates) on all players that do not have a battery current defined. Hopefully this will remind people that they should define the battery current when they start a new port.
|
2009-06-29 18:32:43 +00:00 |
|
config-recorderv2.h
|
Move Archos battery runtime estimation defines into config files instead of powermgmt.h. Replace old default values (which were actually the Archos Player currents) with a new default (1mA). This should give nonsense runtime estimates (instead of semi-reasonable but completely wrong estimates) on all players that do not have a battery current defined. Hopefully this will remind people that they should define the battery current when they start a new port.
|
2009-06-29 18:32:43 +00:00 |
|
config-sa9200.h
|
Commit "FS#10468 - USB HID: Show keypad mode on screen"
|
2009-09-30 10:06:04 +00:00 |
|
config-tpj1022.h
|
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
|
2009-09-06 17:12:09 +00:00 |
|
config-view.h
|
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
|
2009-09-06 17:12:09 +00:00 |
|
config-yh820.h
|
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
|
2009-09-06 17:12:09 +00:00 |
|
config-yh920.h
|
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
|
2009-09-06 17:12:09 +00:00 |
|
config-yh925.h
|
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
|
2009-09-06 17:12:09 +00:00 |
|
config-yps3.h
|
move the CONFIG_LED #define out into config.h as all but 3 targets actually have a real one (and apparently lots had it #defined in a !SIMULATOR block! )
|
2009-09-06 17:12:09 +00:00 |
|
config.h
|
Don't selecu any usb class drivers for a simulator build
|
2009-10-20 18:33:23 +00:00 |
|
config_caps.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
cpu.h
|
Introduce S5L8701 CONFIG_CPU definition for Nano2G and a new CPU_S5L870X "family" define - the 8700 and 8701 are proving to be different. Also move all the cpu-specific defines earlier in config.h
|
2009-07-15 21:34:31 +00:00 |
|
debug.h
|
New makefile solution: A single invocation of 'make' to build the entire tree. Fully controlled dependencies give faster and more correct recompiles.
|
2008-11-20 11:27:31 +00:00 |
|
disk.h
|
Commit FS#9545, storage cleanup and multi-driver support
|
2009-07-17 22:28:49 +00:00 |
|
dm320.h
|
M:Robe 500: Add support for DMA based LCD updates when in Portrait mode. TestFPS measures 190 FPS with the DMA updates vs. 58 FPS for the non-DMA updates.
|
2009-08-20 00:36:39 +00:00 |
|
ds2411.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
eeprom_24cxx.h
|
Various files: make function implementations consistent with their declaration in the header file or static if
|
2009-01-31 23:51:11 +00:00 |
|
eeprom_settings.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
enc_base.h
|
New recording setting to configure how mono recordings are made. Previously, this was always L+R, which was kinda silly if your signal was on L only. This setting allows for L, R or L+R. SWCODEC only for now, to be added for HWCODEC (although that will only be L and L+R probably)
|
2008-10-08 22:18:16 +00:00 |
|
events.h
|
Convert lcd_activation callbacks to use the event system to allow for multiple parallel callbacks (for custom statusbar).
|
2009-10-20 21:54:59 +00:00 |
|
fat.h
|
Patch #1 from FS#10633 (Nano 2G developments) by Michael Sparmann - Allows targets to set a different sector size than 512 for the storage system. Should not affect any other target.
|
2009-10-02 16:41:55 +00:00 |
|
fmradio.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
fmradio_i2c.h
|
Fix red.
|
2008-12-21 20:31:31 +00:00 |
|
font.h
|
Get rid of some of the code duplication from checkwps, it still duplicates a lot though.
|
2009-09-13 13:40:58 +00:00 |
|
gdb_api.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
general.h
|
Move screendump from apps to firmware, solving two nasty firmware-to-apps calls. This required to move the filename creation functions as well. * Fix bug in the BMP header of Clip screendumps. * Add remote screendump for targets with an LCD remote. * Simplify some ifdefs and rename a macro in the sim.
|
2009-02-10 23:43:37 +00:00 |
|
generic_i2c.h
|
Simplify generic_i2c, removing the link between i2c address and i2c interface, adding the concept of an i2c bus index.
|
2009-03-03 18:00:17 +00:00 |
|
hangul.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
hd66789r.h
|
Commit fs#9404 (iAudio 7 updates by vitja). Also fixes play/pause behaviour on D2.
|
2008-09-16 08:09:44 +00:00 |
|
hotswap.h
|
add firmware/driver/sd.c which contains common code between SD drivers
|
2009-07-01 21:49:13 +00:00 |
|
hwcompat.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
i2c-coldfire.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
i2c-pp.h
|
Move private #defines from i2c-pp.h to i2c-pp.c
|
2009-05-21 14:31:47 +00:00 |
|
i2c-s5l8700.h
|
S5L8700: implement i2c driver (used for communicating with the RTC and the codec in the meizus)
|
2009-06-27 20:11:11 +00:00 |
|
i2c.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
i2s.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
iap.h
|
Correct svn:keywords and svn:eol-style on a few more files.
|
2009-07-12 09:43:44 +00:00 |
|
ifp_usb_serial.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
imx31l.h
|
Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h
|
2009-06-29 14:30:12 +00:00 |
|
isp1362.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
isp1583.h
|
Correct svn:keywords and svn:eol-style on a few more files.
|
2009-07-12 09:43:44 +00:00 |
|
jz4740-codec.h
|
Fix yellow
|
2009-05-26 23:28:53 +00:00 |
|
jz4740.h
|
Ingenic Jz4740: add basic frequency switching
|
2009-07-03 21:34:40 +00:00 |
|
jz_mxu.h
|
Ingenic Jz4740:
|
2008-12-31 01:57:07 +00:00 |
|
kernel.h
|
Guard the Timeout API declarations with the correct #ifdef
|
2009-07-14 20:04:26 +00:00 |
|
lcd-charcell.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
lcd-remote.h
|
Revise r23225 a bit, removing the debug_printf function and implementing more generic lcd_(remote)_putsf function(s) instead and use those in more places
|
2009-10-17 18:02:48 +00:00 |
|
lcd.h
|
Convert lcd_activation callbacks to use the event system to allow for multiple parallel callbacks (for custom statusbar).
|
2009-10-20 21:54:59 +00:00 |
|
led.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
logf.h
|
A new implementation of logf, logfdisplay and logfdump.
|
2009-08-21 22:54:23 +00:00 |
|
ltv350qv.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
lv24020lp.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
m5636.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
m66591.h
|
Correct svn:keywords and svn:eol-style on a few more files.
|
2009-07-12 09:43:44 +00:00 |
|
mas.h
|
FS#9157 - Tidy up some MAS35XX constants
|
2009-10-01 05:25:20 +00:00 |
|
mas35xx.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
mc13783.h
|
imx31/mc13783: Do some housekeeping with register macros, function names and other defines. No functional changes (except to alter a couple int priorities).
|
2009-03-22 01:50:48 +00:00 |
|
mcf5249.h
|
Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h
|
2009-06-29 14:30:12 +00:00 |
|
mcf5250.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
mips-archdefs.h
|
Onda VX747:
|
2009-02-16 22:49:58 +00:00 |
|
mips.h
|
Onda VX747:
|
2009-02-16 22:49:58 +00:00 |
|
mipsregs.h
|
Onda VX747:
|
2009-02-16 22:49:58 +00:00 |
|
mmc.h
|
Commit FS#9545, storage cleanup and multi-driver support
|
2009-07-17 22:28:49 +00:00 |
|
mp3_playback.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
mv.h
|
Commit FS#9545, storage cleanup and multi-driver support
|
2009-07-17 22:28:49 +00:00 |
|
nand.h
|
Core changes to allow storage drivers to do cleanup on shutdown, and iPod Nano 2G shutdown code rework (FS#10668)
|
2009-10-09 20:36:09 +00:00 |
|
nand_id.h
|
Correct svn:keywords and svn:eol-style on a few more files.
|
2009-07-12 09:43:44 +00:00 |
|
ohci.h
|
Add data structures
|
2009-07-12 15:29:22 +00:00 |
|
panic.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
pcf5060x.h
|
D2: Use a common function for reading ADC values from the PMU
|
2009-10-08 15:47:43 +00:00 |
|
pcf5063x.h
|
Initial support for runtime detection of the PMU used in newer D2+ models (PCF50635). The backlight and battery monitoring should work, but the RTC and touchscreen are not yet implemented.
|
2009-10-10 17:35:02 +00:00 |
|
pcf50605.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
pcf50606.h
|
D2: Use a common function for reading ADC values from the PMU
|
2009-10-08 15:47:43 +00:00 |
|
pcf50635.h
|
Initial support for runtime detection of the PMU used in newer D2+ models (PCF50635). The backlight and battery monitoring should work, but the RTC and touchscreen are not yet implemented.
|
2009-10-10 17:35:02 +00:00 |
|
pcm.h
|
Gigabeat S: Implement an SDMA API and use it in the PCM driver. Some other miscellaneous adjustments to recording and PCM buffer to accomodate use of physical addresses and cache coherency.
|
2009-02-08 22:32:41 +00:00 |
|
pcm_sampr.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
pl081.h
|
Sansa AMS: Use DMA for SD transfers (read and write)
|
2008-11-25 13:38:32 +00:00 |
|
pl180.h
|
AMS Sansa: Add voltage defines to pl180.h. No functional changes.
|
2009-10-19 05:34:17 +00:00 |
|
pnx0101.h
|
Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h
|
2009-06-29 14:30:12 +00:00 |
|
power.h
|
Make si4700 tuner driver more sane with bit and field defines and entirely hide strange i2c interface from code with write/set/clear/masked functionality. On Gigabeat S use by-the-book busmode selection and GPIO lines. Implement some primitive station detection, debug registers in screen, and misc. changes to tie things together.
|
2008-12-27 19:18:50 +00:00 |
|
powermgmt.h
|
1 mA gets rounded to 0 during computation, so use 2 mA as the default.
|
2009-06-29 21:40:03 +00:00 |
|
pp5002.h
|
Make RoLo work on PP5002. * Rename CACHE_CTL flag values on PP5002 for consistency.
|
2009-10-19 21:38:52 +00:00 |
|
pp5020.h
|
Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h
|
2009-06-29 14:30:12 +00:00 |
|
pp5024.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
pp6100.h
|
Add information gleaned from disassembling the main firmware image. Detect lcd type in use. Still no actual output
|
2009-07-17 20:40:40 +00:00 |
|
profile.h
|
Commit FS#9170 by Dave Hooper. Adds support for profiling on ARM, and fixes various issues with compiling profile builds. Also, note that profile_reader.pl syntax has changed.
|
2008-07-28 22:43:41 +00:00 |
|
qt1106.h
|
set svn properties
|
2008-09-17 18:50:34 +00:00 |
|
r61509.h
|
Onda VX7x7: fix error when compiling with USB_BOOT defined
|
2009-07-29 12:57:42 +00:00 |
|
ramdisk.h
|
Commit FS#9545, storage cleanup and multi-driver support
|
2009-07-17 22:28:49 +00:00 |
|
rolo.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
rtc.h
|
FS#10569 RTC driver cleanup
|
2009-09-26 14:58:32 +00:00 |
|
s1a0903x01.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
s3c2440.h
|
Initial mini2440 port.
|
2009-10-19 18:14:27 +00:00 |
|
s5l8700.h
|
S5l8700: fix some CLCD controller register names
|
2009-10-18 19:44:50 +00:00 |
|
screendump.h
|
Fix the Playersim as well.
|
2009-02-11 00:10:35 +00:00 |
|
scroll_engine.h
|
Const police raid\!
|
2009-09-04 16:04:02 +00:00 |
|
sd.h
|
Commit FS#9545, storage cleanup and multi-driver support
|
2009-07-17 22:28:49 +00:00 |
|
serial.h
|
Commit FS#8624 by Linus Nielsen, Ryan Press, Craig Elliott, and Kenderes Tamas. Adds preliminary support for numerous accessories that use the ipod serial port on the dock connector. See IpodAccessories for a list of tested devices.
|
2008-12-25 01:46:16 +00:00 |
|
sh7034.h
|
Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h
|
2009-06-29 14:30:12 +00:00 |
|
si4700.h
|
Make si4700 tuner driver more sane with bit and field defines and entirely hide strange i2c interface from code with write/set/clear/masked functionality. On Gigabeat S use by-the-book busmode selection and GPIO lines. Implement some primitive station detection, debug registers in screen, and misc. changes to tie things together.
|
2008-12-27 19:18:50 +00:00 |
|
sound.h
|
* Move DSP_CALLBACK_* enum to sound.h
|
2009-08-01 21:38:18 +00:00 |
|
spdif.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
spi.h
|
Correct svn:keywords and svn:eol-style on a few more files.
|
2009-07-12 09:43:44 +00:00 |
|
storage.h
|
Core changes to allow storage drivers to do cleanup on shutdown, and iPod Nano 2G shutdown code rework (FS#10668)
|
2009-10-09 20:36:09 +00:00 |
|
structec.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
sw_i2c.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
synaptics-mep.h
|
Clean up the Synaptics touchpad driver.
|
2009-06-19 02:48:15 +00:00 |
|
system.h
|
fix checkwps breakage caused by r229900
|
2009-10-06 22:02:06 +00:00 |
|
tcc77x.h
|
TCC: Implement ECC error correction for sectors read from NAND. Tested on D2 (78x, MLC) and M200 (77x, SLC).
|
2009-08-12 19:26:04 +00:00 |
|
tcc780x.h
|
D2: Enable ARM cache coherency functions (eg. during codec load), which should eliminate data aborts/freezes on track changes. NOTE: The linker script reserves space at the end of DRAM for the TTB, but this is not currently used.
|
2009-09-01 21:35:37 +00:00 |
|
tea5760.h
|
Meizu: implement i2c for the meizu fmradio and update the tea5760 tuner driver
|
2009-07-07 21:57:16 +00:00 |
|
tea5767.h
|
code police : fix some multiply defined variables
|
2008-10-18 23:31:29 +00:00 |
|
thread.h
|
MIPS: don't save gp register when switching threads
|
2009-05-06 19:51:34 +00:00 |
|
timer.h
|
Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h
|
2009-06-29 14:30:12 +00:00 |
|
tlv320.h
|
cleanup audiohw_set_frequency by adding it to audiohw.h and removing it from all driver .h files
|
2009-01-20 22:55:10 +00:00 |
|
touchscreen.h
|
Touchscreen targets: add calibration screen + rewrite calibration driver (FS#10295)
|
2009-06-16 17:04:47 +00:00 |
|
tsc200x.h
|
Touchscreen support for newer Cowon D2+ hardware revisions (using TSC200x touchscreen controller).
|
2009-10-15 20:13:29 +00:00 |
|
tsc2100.h
|
Correct svn:keywords and svn:eol-style on a few more files.
|
2009-07-12 09:43:44 +00:00 |
|
tuner.h
|
FS#9824: Fix FM channel spacing for Europe
|
2009-09-24 22:05:07 +00:00 |
|
uda1380.h
|
cleanup audiohw_set_frequency by adding it to audiohw.h and removing it from all driver .h files
|
2009-01-20 22:55:10 +00:00 |
|
udacodec.h
|
Create an udacodec interface (similar to ascodec and wmcoded) and adapt/implement it for the iriver h1xx/h3xx and the meizus.
|
2009-06-28 17:43:04 +00:00 |
|
usb-s3c6400x.h
|
iPod Nano 2G USB support based on the S3C6400X datasheet. Disabled by default for now.
|
2009-10-20 06:37:07 +00:00 |
|
usb-tcc.h
|
Move tcc77x/usb-tcc77x.c to usb-tcc.c as it is more general than just tcc77x (even usb-tcc is too specific, but I don't know anything better)
|
2008-11-30 15:43:15 +00:00 |
|
usb.h
|
D2 should have HAVE_USB_POWER defined.
|
2009-10-20 20:44:30 +00:00 |
|
usb_ch9.h
|
reorganise usb_core.c a bit, to make the code more readable and more maintainable (FS#10150 by Tomer Shalev))
|
2009-04-19 19:53:32 +00:00 |
|
usb_core.h
|
Change control handling to start expecting host packets before sending data to the host. This makes the handling less timing sensitive on some controllers
|
2009-10-19 16:21:50 +00:00 |
|
usb_drv.h
|
Add working USB HID driver, by Tomer Shalev (part of his GSoC work).
|
2009-05-16 15:30:09 +00:00 |
|
wm8731.h
|
cleanup audiohw_set_frequency by adding it to audiohw.h and removing it from all driver .h files
|
2009-01-20 22:55:10 +00:00 |
|
wm8751.h
|
cleanup audiohw_set_frequency by adding it to audiohw.h and removing it from all driver .h files
|
2009-01-20 22:55:10 +00:00 |
|
wm8758.h
|
FS#10086 - Playback and recording sample rate setting on the 5G iPod
|
2009-04-06 02:46:42 +00:00 |
|
wm8975.h
|
cleanup audiohw_set_frequency by adding it to audiohw.h and removing it from all driver .h files
|
2009-01-20 22:55:10 +00:00 |
|
wm8978.h
|
cleanup audiohw_set_frequency by adding it to audiohw.h and removing it from all driver .h files
|
2009-01-20 22:55:10 +00:00 |
|
wm8985.h
|
D2: Enable FM radio (based on FS#10035 by Michael Burtin with some changes by myself). Also updates the LV24020 driver to add optional logf debugging.
|
2009-03-21 00:13:20 +00:00 |
|
wmcodec.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
7bff585d83