I have a suspicion that if there is any scrolling skin lines when
the buflib buffer moves it will cause the lcd code to crash.
This *hopefully* explains the random skin related crashed which
have been reported.
Change-Id: I04ee58292e1cea7c77ef9737b0641192f4f7e4ba
Reviewed-on: http://gerrit.rockbox.org/877
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
With LCD driver all calculation will be performed on RGB888 and the hardware/OS
can display from our 24bit framebuffer.
It is not yet as performance optimized as the existing drivers but should be
good enough.The vast number of small changes is due to the fact that
fb_data can be a struct type now, while most of the code expected a scalar type.
lcd-as-memframe ASM code does not work with 24bit currently so the with 24bit
it enforces the generic C code.
All plugins are ported over. Except for rockpaint. It uses so much memory that
it wouldnt fit into the 512k plugin buffer anymore (patches welcome).
Change-Id: Ibb1964545028ce0d8ff9833ccc3ab66be3ee0754
Invalid event data would be accessed if a play message isn't queued
which will cause crash problems.
It came about in the addition of time-based resume.
Change-Id: I1d5219064e2bf552b4183e9db4e7b380ffbe7a67
There is no simple method to detect radio through the 3-wire interface, so it's
not implemented for the YH-925 for now. YH-920 always has a radio.
Change-Id: Iea484d752915fcd40dbbbd7dbbf13e81aaf548db
* sudoku: make colour icons (without screen was squeezed)
* jewels: add colour bitmaps
* pegbox: make game fit on screen (add small header bitmap),
improve keymap
I left the original pegbox keymaps for samsung's YH-92x,
because they seem to make some sense there (YH92x has a
REC switch instead of pushbutton).
Someone with a YH9xx target has to check what is better...
Change-Id: Id388c9d69e4a5a1d8ad4c3d7a05cdfc1dff0d06c
Reviewed-on: http://gerrit.rockbox.org/816
Reviewed-by: Szymon Dziok <b0hoon@o2.pl>
Tested: Szymon Dziok <b0hoon@o2.pl>
Although both players basically have the same keys, the
differences in the layout is rather big, so I think both
deserve their own keymaps.
(On the yh820 the FFWD/PLAY/REW buttons are located above the
direction keys, on the yh920 at the side of the player.
Furthermore the yh920/925 has a REC switch, whereas
yh820 has a push button.)
Change-Id: I0e62a1b101c387646c0bdb07ea142d9d2430ca15
Reviewed-on: http://gerrit.rockbox.org/814
Reviewed-by: Szymon Dziok <b0hoon@o2.pl>
errno is supposed to be thread local and we do that here in a rather
makeshift way by implementing a function that returns a pointer to
the __errno variable in the thread block.
If more serious TLS is required, perhaps it would be worthwhile
implementing it using the linker and the "__thread" storage attribute.
That's a bit overkill just for this. I'm also not liking what I saw
the compiler producing.
Change-Id: I03bc0bd6a89f6e3d6bae7653284ee01054614f9a
Reviewed-on: http://gerrit.rockbox.org/803
Reviewed-by: Michael Sevakis <jethead71@rockbox.org>
Tested: Michael Sevakis <jethead71@rockbox.org>
Previously %Vs styles only took effect upon the first character of text, i.e.
on the right if the line is %arXXX. Now the style is applied for the whole
line width.
Fixes FS#12973.
Change-Id: I95f2cc76a90bfc0779e5a667d5bfa54c33896c89
The plugin buffer was used only to avoid reparsing the playlist, so non-essential.
But when it was used it conflicted with the playlist viewer which already uses
the plugin buffer for playlist purposes simultaneously. It only works by
accident.
Since the reparse avoidance is non-essential don't do it for now. A temp buffer
can be passed to playlist_save() to enable it but the only caller (as of now)
does not do that.
Change-Id: I3f75f89d8551e1ec38800268b273105faba0efbf
Some plugins grab the whole audio buffer and still want to start playback
somehow (e.g. random_folder_advance_config). Since 22e802e the plugin buffer
is allocated via buflib and has to be released explicitely. For these plugins
the automatic free on exit is not sufficient and they need an API function for
that.
Fixes OOM panic on random_folder_advance_config when using start
shuffled playback.
Change-Id: I0d351daa782cb829f4ff80d34c05f40a2e0c142f
This patch completes the plugin keymaps for the Zen X-Fi3 and enables those plugins for compilation.
One key was changed in "button-target.h" for compatibility with Rockboy.
This also caused the changes to "keymap-zenxfi3.c", to keep the stock functionality (no further changes in here).
Change-Id: Ic222faf89e9a9a2332a49d6e532cedb6eb16d3d7
Reviewed-on: http://gerrit.rockbox.org/762
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
Originating from 3661581
Some build clients finding their "standard" string.h's that don't declare
strlcpy?
Change-Id: I50d19c7cecf5ae96ee1855f77d3c2e1f42620108
It is trivial to obtain all required information from the allocated
handles without maintaining global indexes. In fact, it is less
complicated and increases general thread safety.
Other miscellaneous changes (some are nice to do at this time due to
required alterations, with some particularly more relevant than others):
* Handle value 0 will no longer be returned as a valid handle but all
failures will still return a negative value. Creates consistency with
buflib and removes the need to explicitly initialize them.
* Linking a new handle is delayed until explicitly
added by the code that called add_handle, keeping it invisible
until every operation succeeds, which is safer thread-wise. If anything
fails, the handle itself may just be abandoned rather than reqiring it
be freed.
* Dump the special handling to slow buffering when the PCM buffer
is low that calls PCM buffer functions. It doesn't seem to help much
of anything these days and it's a bit of a nasty hack to directly
tie those bits together. It can of course be put back (again!) if
there really is a need for it.
* Make data waiters ping the buffering thread more than just once if
the request is taking too long. Somehow I figured out how the requests
could get forgotten about but can't remember why months later after
making the change in my branch. :-)
* Neaten up some code by using (inline) functions and packing down
parameters; remember handle allocation and movement attributes in the
handle itself rather than figuring it out each time they're needed.
Change-Id: Ibf863370da3dd805132fc135e0ad104953365183
Reviewed-on: http://gerrit.rockbox.org/764
Reviewed-by: Michael Sevakis <jethead71@rockbox.org>
Tested: Michael Sevakis <jethead71@rockbox.org>
FILE typedef to *void needs more work to not break sim and
application builds. I checked only a few random native builds
unfortunately. Sorry for inconvenience.
Prior to this patch the Lua plugin used version 5.1.4. This change
reduces the number of modifications in the Lua source using some new
defines and because the upstream source is now more flexible.
Unless otherwise stated, l*.[ch] files are taken unmodified from the
upstream lua-5.2.3.
fscanf.c:
file descriptors in rockbox are just ints, they are hidden behind a
void* now so liolib requires less modifications. fscanf is updated to
use void* too.
getc.c: this is a new file required for getc implementation in lauxlib.c
lauxlib.c: LoadF replaced FILE* with int, the rockbox file
descriptor int are cast to FILE* (actually void* due to typedef).
getc uses the PREFIX version. stdin is not used, as per 5.1.4.
lbaselib.c: now uses strspn in the number parsing. print uses DEBUGF now
rather than being commented out.
lbitlib.c: use the built-in version from 5.2.3 rather than Reuben
Thomas's external library. Backwards compatible and adds some new bit
operations.
ldo.c: the LUAI_THROW/TRY defines are now in the core lua code, so have
been removed from rockconf.h
liolib.c: here the implementation has changed to use the LStream from
the original source, and cast the FILE* pointers to int. This has
reduced the number of modifications from the upstream version.
llex.c: the only change from upstream is to remove the locale include.
lmathlib.c: updated from the 5.2.3 version and re-applied the changes
that were made vs 5.1.4 for random numbers and to remove unsupported
float functions.
loadlib.c: upstream version, with the 5.1.4 changes for missing
functions.
lobject.c: upstream version, with ctype.h added and sprintf changed to
snprintf.
loslib.c: upstream version with locale.h removed and 5.1.4 changes for
unsupportable functions.
lstrlib.c: sprintf changed to snprintf.
ltable.c: upstream with the hashnum function from 5.1.4 to avoid frexp
in luai_hashnum.
luaconf.h: updated to 5.2.3 version, restored relevant parts from the
original 5.1.4 configuration. The COMPAT defines that are no longer
available are not included.
lundump.c: VERSION macro conflicts with the core Rockbox equivalent.
rocklib.c: luaL_reg is no longer available, replaced by luaL_Reg
equivalent. Moved checkboolean/optboolean functions to this file and out
of core lua files. luaL_getn is no longer available, replaced by
luaL_rawlen. luaL_register is deprecated, use the newlib/setfuncs
replacements. rli_init has to be called before setting up the newlib to
avoid overwriting the rb table.
rocklib_aux.pl: use rli_checkboolean from rocklib.c.
rocklua.c: new default bits library used, update the library loading
code with idiomatic 5.2 code.
strcspn.c: no longer needed, but strspn.c is required for strspn in
lbaselib.c
Change-Id: I0c7945c755f79083afe98ec117e1e8cf13de2651
Reviewed-on: http://gerrit.rockbox.org/774
Tested: Richard Quirk <richard.quirk@gmail.com>
Reviewed-by: Marcin Bukat <marcin.bukat@gmail.com>
It's not easy for the originating screen to perform cleanup in case of USB
because the usb screen is invoked indirectly via default_event_handler(). To
avoid stale scrolling lines perform the cleanup in the usb screen itself.
Side effect should be no worse than scrolling lines to restart in SBSes that
show during USB.
Change-Id: I9aa491b3d4b649c0b3be70048ebcb9d817c0356c
add_event_ex is added that takes an extra user_data pointer. This pointer is
passed to the callback (add_event and add_event_ex have slightly different
callbacks types). All callbacks also get the event id passed. Events added
with add_event_ex must be removed with remove_event_ex because the user_data
pointer must match in addition to the callback pointer.
On the other add_event is simplified to omit the oneshort parameter which
was almost always false (still there with add_event_ex).
As a side effect the ata_idle_notify callbacks are changed as well, they
do not take a data parameter anymore which was always NULL anyway.
This commit also adds some documentation to events.h
Change-Id: I13e29a0f88ef908f175b376d83550f9e0231f772
Before time-based resume this was impossible since playback could not
be started at a specified elapsed time, only seeked with playback already
running.
Right now the "FILE" field is used, if present, to do the lookup from
from the .cue to the audio file when it is separate from the audio file.
If no path is specified, the .cue and audio file must be in the same
directory.
When the cuesheet is embedded, the containing file is used and the FILE
field is ignored.
Supports starting playback and seeking to cue points from the cuesheet
browser even without Cuesheet Support turned on.
Change-Id: Ib5b534c406f179a7f8c7042a31572b24a62c0731
Reviewed-on: http://gerrit.rockbox.org/522
Reviewed-by: Michael Sevakis <jethead71@rockbox.org>
Tested: Michael Sevakis <jethead71@rockbox.org>
This complements offset-based resume and playback start funcionality.
The implementation is global on both HWCODEC and SWCODEC.
Basically, if either the specified elapsed or offset are non-zero,
it indicates a mid-track resume.
To resume by time only, set elapsed to nonzero and offset to zero.
To resume by offset only, set offset to nonzero and elapsed to zero.
Which one the codec uses and which has priority is up to the codec;
however, using an elapsed time covers more cases:
* Codecs not able to use an offset such as VGM or other atomic
formats
* Starting playback at a nonzero elapsed time from a source that
contains no offset, such as a cuesheet
The change re-versions pretty much everything from tagcache to nvram.
Change-Id: Ic7aebb24e99a03ae99585c5e236eba960d163f38
Reviewed-on: http://gerrit.rockbox.org/516
Reviewed-by: Michael Sevakis <jethead71@rockbox.org>
Tested: Michael Sevakis <jethead71@rockbox.org>
Somehow, a long long time ago, I put MAX*/MAX* in the config data range
fields instead of MIN*/MAX* which forced the settings loader to acknowledge
only 100 as a valid setting other than the default.
Change-Id: Ifbfcafad27e239942449848d6a09426173bbde54
No code changed, just shuffling stuff around. This should make it easier to
build only select parts kernel and use different implementations.
Change-Id: Ie1f00f93008833ce38419d760afd70062c5e22b5
This patch adds a configurable line separator between list items, very
similar to lists in Android. Additionally, below the list item there is a
thicker line. It can be disabled in the settings. Its color can
be configured as well.
Remote and monochrome displays are explicitly unsupported. If there is desire
this can be changed but it doesn't seem useful to me.
Change-Id: I005313b0d8f5ecd15864bf20e66ea4e3390d8b7d
Since eec89a9 icons have been centered using same calculation as for fonts.
In edge cases this is visually different from before and didn't align
well to the font's baseline. Revert to the old calculation just for centering
icons to fix.
A proper aligorithm would take the baseline into account but this has
worked sufficiently well for us (fix this if needed)
Change-Id: I86593529b16cd28ae4552641e216e73795f2450c
Especially on hosted dir_get_info() can be relatively. It is commonly called
after every readdir() for further information about the dir entry. So it's
peformance compared to readdir()-only is interesting.
Change-Id: I03ab41fb190acf738e04a5d3b2a4fe29276094f6
CONFIG_STORAGE & STORAGE_HOSTFS allows to use parts of the storage_* API to be
compiled for application targets without compiling storage.c or performing
actually raw storage access. This is primarily to enable application targets to
implement HAVE_MULTIVOMULE/HAVE_HOTSWAP (in a later commit).
SIMULATOR uses the same mechanism without explicitely defining STORAGE_HOSTFS
(how to add a bit to an existing preprocessor token?).
Change-Id: Ib3f8ee0d5231e2ed21ff00842d51e32bc4fc7292
Plugins/Applications/main_menu_config allows you to edit the
main menu order without having to manually edit config.cfg.
Press the standard OK button to access the internal menu
which allows you to move items up/down in the order and toggle
their visibility. Exit via this menu to have the order saved.
(Suggestions welcome to improve this UI)
Change-Id: I59715ef1ca265aeb6f9666ef27026bc1093f2579
This is the basic port to the new target Samsung
YP-R1, which runs on a similar platform as YP-R0.
Port is usable, although there are still
some optimizations that have to be done.
Change-Id: If83a8e386369e413581753780c159026d9e41f04
Even though the DMA buffer itself does not move the ISR copies from a movable
buffer into the static commit buffer. To ensure this copying yields consistent
data it must not be interrupted by this ISR..
Also bump the commit buffer size to 2k, this should reduce the overhead
considerably because many clips are smaller than that (especially on
swcodec/speex).
Change-Id: I4e1ab83074f31fc91b51a58baa1df55ce659ac73
The voice engine can now request more voice data during decoding, it does
not require the entire clip to be available before start of decoding anymore.
Therefore the commit buffer does not need to hold an entire voice clip anymore,
and can be made greatly smaller.
Change-Id: I3eca9026448e725b9b8d0dae1efca0ad185371da
This unifies the talk.c for all possible voice payload. .talk clips are placed
onto the same unified clip cache, along with normal clips. This allows for more
effecient memory usage.
The cache handling makes a slight difference between normal clips and .talk
ones: .talk clips can be cached multiple and are always freed first.The extra
logic to avoid loading multiple copies of .talks is not necessary because the
will be freed first anyway.
Change-Id: I88d056a0a613b129f5875f50fdb757b58bac0a42
This unifies the talk.c for all targets. The only separation is left is
TALK_PROGRESSIVE_LOAD: When this is defined the talk buffer will not be
initially prefilled. This is useful for super slow storage or when the buffer
is not large enough to prefill it with useful clips (the prefill code could
be made smarter too).
The buffer size can be adjusted. By default lowmem uses 100k while
other targets load the entire file. The bigger the more clips can be cached
but with diminishing returns.
Change-Id: Ife38fb101c53093117e6638c40c65f7d177a31d4
Previously the clip cache of TALK_PARTIAL_LOAD reserved space N clips, each slot
was as big as the maximum sized clip which was necessary to replace clips
in-memory in MRU-style.
The cache management now uses buflib to allocate and free each clip, using the
clip's real size. This allows the clip cache to be much more compact, because
no space is wasted for the max. sized clip. This makes use of buflib's ability
to easily manage differently-sized memory chunks by moving them to make free
space.
As an example: for english.voice TALK_PARTIAL_LOAD allocated 288k in advance.
for just 64 clips. With this patch ~70 clips can be stored in a 100k buffer.
This, the memory usage is cut by 2/3 and almost optimal (there's still the
buflib per-alloc cookie overhead).
As a result the TALK_PARTIAL_LOAD buffer is restricted to 100k which still
allows for more clips than previously, on average.
Change-Id: I257654071e9a95770cd6db2c2765f020befce412
This is necessary because when voice is active audio is disabled. But only
audio was able to shrink it's buffer to let other memory allocs succeed.
talk needs to be able to do this too when it owns the audio buffer exclusively.
Change-Id: Idea8ab90da7169f977c0c766cccb42c4fe6d6e81
talk_init() is called by settings_apply() already which is called on boot.
Doing it again means loading the voicefile a second time which isn't necessary.
Change-Id: I4decd16401e63bf87338d3163c99d06d69fe3a3c
63cfbe0 fixed the number of codepages for bitmap targets. The same issue is
present on charcell, so update the number for that as well, fixing UTF-8
missing in the list.
Change-Id: Ib5d3494ed3d80e839ae3f59ec0a4277e5aa9d6fd
When the policy is not set, it'll by default not give the clip buffer away.
Callers of core_alloc_maximum() suffer from this. However, the thumbnail
buffer can be easily freed when needed because nothing needs to be
reloaded from disk when it is reallocated (thumbnail clips are loaded on
demand, when in the file browser). Do this to give core_alloc_maximum() callers
a better chance to succeed with the default talk buffer policy.
Change-Id: I8c0da29c520612ca903f6c930bd7c74ae97eca3b
In most of the translations strings with SYSFONT in title is
translated. This leads to displaying problem in (at least) graphical
equalizer due to the lack of non-latin character support in the
built-in font.
Change-Id: I0d27a5358e4eb539d4247c84975d8501d7668836
Reviewed-on: http://gerrit.rockbox.org/727
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
When skins use the default backdrop (via %X(-) or no %X at all) and the setting
changes it needs to be reloaded, otherwise when changing themes the new theme
could show the backdrop from the previous theme. The same needs to be
done when re-selecting the same theme after USB because the backdrop file was
potentially overwritten.
Fixes FS#12892 and FS#12942.
Change-Id: Ic2d20740cc385fa99667ce8a71507dbda2efceaf
2d9c0bab added a codepage but didn't increase the number of choices
for the setting, so UTF8 dropped off the list.
Change-Id: I154032bddaabcb783212370a12b2e5cdea305302
The old method simply polled the lastbtn variable in button.c. This approach
does not clear the button event queue which overflows as a result (panic
in the simulator). Use proper APIs to fix that and adopt the
method from the old read_scroll_wheel() function, which reads buttons until
the button queue is empty, for all targets.
Change-Id: Ibf198f6e597e7f51ab4ebcfcae4ebebbe8d7845c
This should catch the case of buffer misuse which results
in corrupted cookie of next allocation. The check is performed
on move_block() so it may be a bit late.
There is buflib_check_valid() provided which checks the
integrity of all cookies for given context.
On DEBUG build with --sdl-thread this check is carried out
for core_ctx on every context switch to catch problems earlier.
Change-Id: I999d4576084592394e3dbd3bdf0f32935ff5f601
Reviewed-on: http://gerrit.rockbox.org/711
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
iap-core.h defines LOGF_ENABLE unconditionally but hexstring()
helper function was not compiled if logf support was not
selected in configure. The regular builds worked by accident
because logf() lines where discarded by preprocessor.
Change-Id: Id76af478e7c760d81168ebf9bf3eb973a679987c
If the UI viewport is too small only the most top/left parts of the logo will
be displayed. This goes one step further than bac85f2.
Change-Id: I832b0e787e57e3b102a9c097cf1cccd7d4ad92d9
Fonts can now be assumed (by the code) to be available during USB. Make
use of this fact in the USB screen and don't disable the skins.
Change-Id: I525359aae16660604e8fe89addc0bdf97a3fafc1
Even though you can insert leading zeros that makes ascii sort work for
numbers, sometimes the leading zeros don't suffice. In order to always
sort numerically strnatcasecmp() is needed.
With the default tagnavi.config this affects albums with discnum > 9
or tracnums > 99. This FS#12888.
Change-Id: Ie265c86eaf6dd07b6beda9e5eef25eb81eef8fd4
When changing activities (those that are indicated via %cs skin tag), the sbs
needs to be updated, so that the UI viewport can be applied before that
activity draws its UI.
Fixes FS#12804. I hope this commit doesn't have bad side effects.
Change-Id: If45654e356749f5f27991430dbd1da6f23e6f802
This fixes displaying of the main USB screen on m:robe 100. A remote for
this particular target has no native remote USB logo and it uses a larger
one. However it's a good idea to perform this check always IMHO.
Change-Id: I56ceb2316c551269be011b60271d8da11cb8b073
We don't use the default_val anywhere, so there's no need to try
to use it in a buggy and null pointer dereferencing way here.
Change-Id: Ie60dbab7647056e2bf457cb5dcc5b60012ea1651
Add a "volume limit" parameter to the configuration file. The maximum
value of volume setting in sound menu will be limited to the same as
volume limit. Also each time when setvol() is excuted, Rockbox will
check if the global_settings.volume value larger than
global_settings.volume_limit. If larger, take the value of volume_limit
instead. The volume_limit argument shares the same maximum and minimum values
with volume argument, while taking the maximum volume as its default value.
Change-Id: I8ca9bc6ea6e617b48fc346aae5f2a0a1d259ae36
Reviewed-on: http://gerrit.rockbox.org/697
Reviewed-by: Jonathan Gordon <rockbox@jdgordon.info>
Like on other targets, left/right should change by 2% only temporarily.
In timestretch mode fast speed change was not available.
Fixes FS#12900.
Change-Id: I8819c2ae7266bc09565b5ef13055985acf483f98
At the end of the format string it wrote a last byte (or inline string) past
the end of the lcd boundaries, potentially overwriting unrelated memory. It
now makes sure it won't exceed the viewport's width.
Change-Id: Id4cfce918e8b070b7fc3c7d33f389f7a171963ff
By specifying this param the bar will not have a border/box. Instead
the inner part that fills up is maximized on the bar area.
Note that this only affects bars using foreground and background colors,
not those constructed with images.
Change-Id: Ib8dd49ecbaf9e16b96de840f5f365871b73d4fa4
Allocate MAX_LINES+1 because at the time get_line_desc() is called
the scroll engine did not yet determine that it ran out of lines
(because puts_scroll_func() wasn't called yet. Therefore we can
run out of lines before setting the used field. By allocating
one item more we can survive that point and set used to false
if the scroll engine runs out of lines.
Change-Id: I7a9af1bce256c6e07d254f096bd5865fa7cf2cee
With the new lcd_putsxy_scroll_func() code can register custom scroll functions
(put_line() makes use of that). In order for the custom scroller to be able
to properly manage its userdata pointer (set via struct scrollinfo::userdata)
the scroll engine must inform the scroller about start and stop of scrolling.
To inform about start the lcd_scroll_* functions now return true when
the line will scroll. To inform about stop the scroll engine calls into the
scroller one last time, with the text set to NULL.
put_line() can use this to release the userdata registered per scrolling line
so that it can be recycled.
This fixes that some scrolling lines became glitchy after some time because
the userdata was recycled too early.
Change-Id: Iff0a6ce2a4f9ae2bada1b8e62f4f5950224942a9
The code expected the color table at offset 54 (14+size of BITMAPINFOHEADER),
which was after the BITMAPINFOHEADER header. However, newer BITMAPINFOHEADER
versions exist which have more fields before the color table. Fix this by
explicitely seeking to the color table.
Change-Id: If1dfc77e7485e5a9e0bc0e7f577152da9358bd71
This fixes that the playlist viewer still shows the icons after changing
the playlist viewer specific show_icons value until re-opened.
Change-Id: I42f287bcf02b27f0255dc157560c2e6575307eb6
This was lost in 97a4c1ef (svn r30177) for unkown reason but the manual still
mentions this item, so I assume it was an accident. It doesn't hurt anyway.
Fixes FS#12930.
Change-Id: I2f5cd81913ec7bb911d1117e50c010a5c1b89b52
The %Vf and %Vb tags change the colors for the rest of the viewport. This
requires the rest of the vp to be redrawn when they change due to a conditional.
The previous code did this redraw in all cases (conditional or not) which
led to visible blinking.
Change-Id: Ie59dfc6fe8ed76485a2a2bd7caf1315f1944c227
Because inline strings have to be copied (to escape '$') the local buffer
can be exhaused. The code didn't check for this. The buffer is increased
to handle filenames plus some extra chars but truncates to avoid overflow.
If you have longer strings please pass them via $t tag, in which case
put_line() imposes no additional length-limitation.
Change-Id: I0ca20adbe72f6d44cb442f34d665c16b12cbbaeb
put_line() needs to change fore- and background colors if required by
the line style. This should really only be done if required, and be undone
as to not compromise subsequent lines. This fixes %Vf and %Vb skin tags.
Change-Id: I85e5a0d1d64aa9eb76a891d9ce1de1320274a69a
Greylib performed a horrible hack and stored fg and bg patterns in other
struct viewport fields. One of them was just removed. So instead of
this hack simply enable the *_pattern fields for mono targets as well,
so that greylib can use them normally.
Change-Id: Ib0842ebcc97f5bf9d9382b4471903afa2f96f39f
These where used for line styling during scrolling, which is now done in apps/,
The viewport struct doesn't need to record these anymore.
Change-Id: I810d9dcb2644b00a798c6e75acab69c74a78e77f
This logic is moved into apps (put_line()) which can better handle line
decorations with respect to scrolling, mulitline and other complications.
Firmware doesn't need this. The remaining drawing function know only one style,
that is foreground on background/backdrop (changing drawmode is still supported).
Change-Id: I707060edc388a7d723a7d09b0cf5cbda6ec56708
Since scrolling is now pixel-based this is not necessary anymore. custom line
height is handled by put_line() but can also possible to implement with
lcd_puts_scroll_func().
Change-Id: Iee9b12bf99afac93d95d2a1a6f5d5b4db237b21c
With this functions removed there is no exported function in firmware left
that draws line decorations. Also no function supports specifying an y-offset
anymore (was used for pixel accurate positioning of otherwise strictly line-based
API calls).
Both should be handled in apps/ now.
Change-Id: Iba4b28ccc6e686c7db63e34b51ad4badae983fce
This plugin had a (broken) poor-mans list implementation which can be
better achieved through put_line().
Change-Id: I4ba92ba3a01b84a273b3f0a5d067b24c622ddc9e
This enables removing large portions of code, simplifiyng the drawing routine.
All of the removed code is functionaltiy now available through put_line().
Change-Id: Ib8e61772134189a8c3c6d22345c0b45e912bea76
This function is a fully-fletched, high-level pixel-based line printer, that
combines functionality of several firmware and list functions. It can
draw spacing, icons and text in a single call, in any order and each multiple
times. It can also apply line decorations at the same time.
It features printf-like semantics by accepting a format string that contain
format tags as well as inline text.
It's accessible directly, but also through the multi-screen api for plugins.
Change-Id: I70f5a77bbf4b0252521f2e47ead377b9d6d29b54
This is needed by the upcoming put_line() api to apply different drawmodes
depending on the format.
Change-Id: I626a7369a6e75c9c46af1ca5e4f1a9d401899b68
Since x is viewport-relative the icon isn't necessarily placed at the physical
display boundaries so that the padding isn't always useful. In fact it does
more harm if one wants to place an icon exactly at 0 of a (non-default)
viewport.
Calling code looks still mostly fine. I've only modified list drawer to include
the padding in the call-site.
Change-Id: I6b16b3d4377c3553234667b79837adde10e0edf2
It is similar to lcd_gradient_fillrect(), except that it only draws a part
of the complete gradient. This can be used to draw only the bottom half
of a full gradient.
Change-Id: Ib47cc5237f6966e35ba07988bddbb00fd97adf96
This function supports installing a custom scroll callback. This will be
called when the scrollengine redraws the line. It allows to draw extended
styles (or anything your can possible imagine) along with the text.
It is also strictly pixel-based, the first pixel-based function that supports
scrolling.
Change-Id: I57f81ac7b3d08b877aea4cb8afa882f175ebcdfc
The old icons looked exactly like the mono version, and all >1 bpp drivers
support rendering mono bitmaps. Therefore a mono bitmap can be used which
requires less ram.
This affects only the builtin icons, not the ones used by cabbiev2.
Change-Id: I3b02b5b04fe8b4bcc69e83310871254d336b648a
This reverts commit 61a096499b.
The original issue was caused by a new structure member which caused
bmp_args::buf to be unaligned for 2-byte reads. Enforcing that alignment
should be the faster fix. Aligning to cache (while at it) should
improve bmp loading times even more.
Change-Id: I58a2caaf08c0ce46e2fb9666de628a30a36ea5f4
On hwcodec talk.c has the entire audio buffer (not just parts of it), therefore
it must give up everything and cannot count on core_alloc_maximum() to return
the remaining space. This is equivalent to it was handled before 22e802e.
You could probaby do smarter and shrink for example the .talk clip buffer
but is it really worth it?
Change-Id: Idc3431c59fb41b05338559c615093358c5d8ed9b
This fixes the radioart crash that was the result of buffering.c working
on a freed buffer at the same time as buflib (radioart uses buffering.c for the
images). With this change the buffer is owned by buflib exclusively so this
cannot happen.
As a result, audio_get_buffer() doesn't exist anymore. Callers should call
core_alloc_maximum() directly. This buffer needs to be protected as usual
against movement if necessary (previously it was not protected at all which
cased the radioart crash), To get most of it they can adjust the willingness of
the talk engine to give its buffer away (at the expense of disabling voice
interface) with the new talk_buffer_set_policy() function.
Change-Id: I52123012208d04967876a304451d634e2bef3a33
This is an improvement to the current compressor which I have added
to my own Sansa Fuze V2 build. I am submitting here in case others
find it interesting.
Features added to the existing compressor:
Attack, Look-ahead, Sidechain Filtering.
Exponential attack and release characteristic response.
Benefits from adding missing features:
Attack:
Preserve perceived "brightness" of tone by letting onset transients
come through at a higher level than the rest of the compressed program
material.
Look-ahead:
With Attack comes clipping on the leading several cycles of a transient
onset. With look-ahead function, this can be pre-emptively mitigated with
a slower gain change (less distortion). Look-ahead limiting is implemented
to prevent clipping while keeping gain change ramp to an interval near 3ms
instead of instant attack.
The existing compressor implementation distorts the leading edge of a
transient by causing instant gain change, resulting in log() distortion.
This sounds "woofy" to me.
Exponential Attack/Release:
eMore natural sounding. On attack, this is a true straight line of 10dB per
attack interval. Release is a little different, however, sounds natural as
an analog compressor.
Sidechain Filtering:
Mild high-pass filter reduces response to low frequency onsets. For example,
a hard kick drum is less likely to make the whole of the program material
appear to fade in and out. Combined with a moderate attack time, such a
transient will ride through with minimal audible artifact.
Overall these changes make dynamic music sound more "open", more natural. The
goal of a compressor is to make dyanamic music sound louder without necessarily
sounding as though it has been compressed. I believe these changes come closer to this goal.
Enjoy. If not, I am enjoying it
Change-Id: I664eace546c364b815b4dc9ed4a72849231a0eb2
Reviewed-on: http://gerrit.rockbox.org/626
Tested: Purling Nayuki <cyq.yzfl@gmail.com>
Reviewed-by: Michael Giacomelli <giac2000@hotmail.com>
Much of the scrolling work is moved from lcd-bitmap-common to lcd-scroll.c,
a small scroll callback routine remains. This callback can potentially be
overridden by more extensive scrollers.
The callback also gets fed with pixel-based scrolling information, which
finally removes the strict line-based nature of the scroll engine. Along with
this is the change from scroll_stop_viewport_line() to scroll_stop_viewport_rect()
which works on a pixel-based rectangle instead of lines.
The ultimate goal is to move most of the scroll work to apps, which can
much better decide which line decorations to apply etc. This work is laying
the ground work.
Change-Id: I3b2885cf7d8696ddd9253d5a9a73318d3d42831a
The port uses the imx233 soc, it's a STMP3650 based Samsung player
Change-Id: I50b6d7e77fd292fab5ed26de87853cd5aaf9eaa4
Reviewed-on: http://gerrit.rockbox.org/490
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
The code was trying to probe for volume presence by calling drive layer
with volume index. It is a miracle it get unnoticed so far. Introduce
proper volume probing using the vol->drive map in the disk layer.
Change-Id: I463a5bcc8170f007cad049536094207d2ba3c6fc
Reviewed-on: http://gerrit.rockbox.org/669
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
BUTOTN_REL should be BUTTON_REL
Change-Id: I5b4aaeb87f31c5c0779656651b074512e22bcc4e
Reviewed-on: http://gerrit.rockbox.org/663
Reviewed-by: Benjamin Brown <foolshperson@gmail.com>
Reviewed-by: Marcin Bukat <marcin.bukat@gmail.com>
Originally written and uploaded by Lalufu (Ralf Ertzinger) in Feb 2012.
They have been condensed into a single patch and some further additions
by Andy Potter.
Currently includes Authentication V2 support from iPod to Accessory,
RF/BlueTooth transmitter support, selecting a playlist and selecting a
track from the current playlist. Does not support uploading Album Art
or podcasts. Has been tested on the following iPods,
4th Gen Grayscale, 4th Gen Color/Photo, Mini 2nd Gen, Nano 1st Gen and
Video 5.5Gen.
Change-Id: Ie8fc098361844132f0228ecbe3c48da948726f5e
Co-Authored by: Andy Potter <liveboxandy@gmail.com>
Reviewed-on: http://gerrit.rockbox.org/533
Reviewed-by: Frank Gevaerts <frank@gevaerts.be>
This fix FS#12902 and prevent same bug in bookmark screen.
thanks to Julian67 for reporting
Change-Id: Ifd2a383fd0f24aa3e242a8c72668de85526f0a70
Reviewed-on: http://gerrit.rockbox.org/622
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
This fix FS#12895, Menu has no effect in EQ context anyway...
Change-Id: I31f8e1fdfea1479efd75cb411125e08eafade403
Reviewed-on: http://gerrit.rockbox.org/620
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
Target that have a touchpad/touchscreen should disable it while
being locked (In order to avoid LCD to drain battery power due to
"key locked" constant reporting messages. If they a have a keylock
button this was already handled at driver level. If not (e.g. fuze+),
they will have to implement a switch at driver level that action.c
can operate on softlock.
This patch does the following for any target having a touchpad
or a touchscreen and no HAS_BUTTON_HOLD (ie any softlock target)
1) it implements the code to call button_enable_touch(bool en) in
action.c.
2) button_enable_touch is implemented in button.c and call
either touchpad_enable or touchscreen_enable
3) those two function are implemented respectively in touchscreen.c
and a new touchpad.c file. They provide a generic way to silents touch's
device and call a function at driver level where target specific code
can be implemented if possible/needed (for power saving for instance).
Those function name are touchpad_enable_device and touchscreen_enable_device
4) we implement an empty function at driver level of targets that need it
to have them still being able to compiled.
Change-Id: I9ead78a25bd33466a8533f5b9f259b395cb5ce49
Reviewed-on: http://gerrit.rockbox.org/569
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
ACTION_STD_MENU seems to be an important keymaps. We map it to
BUTTON_BACK and keep cancel on the BUTTON_LEFT
Change-Id: Iea4a1e4671faee376ad4200b08ca82c2d00d1ff9
Reviewed-on: http://gerrit.rockbox.org/571
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
Instead of providing yet another memory allocator implementation
use tlsf and simply link tlsf library.
Another small improvement is to *grow* memory pool by grabbing
audiobuffer instead of just switching to use audiobuf exclusively.
Tested with simple lua 'memory eater' script.
This patch extends tlsf lib slightly. You can provide
void *get_new_area(size_t * size) function which will override
weak dummy implementation provided in lib itself. This allows to
automaticaly initialize memory pool as well as grow memory
pool if needed (for example grab audiobuffer when pluginbuffer
is exhaused).
Change-Id: I841af6b6b5bbbf546c14cbf139a7723fbb982f1b
codec makefiles larger freedom in what they can do to it.
Use this in libopus to prepend the libopus searchpaths to
CODECFLAGS so that its internal config.h will be picked up before
our global one. This avoids having to do a s/config.h/opus_config.h/
when syncing which will be handy soon.
Change-Id: I018d729aa0c8300fa3149f22a5a8c5668b339dfa
Reviewed-on: http://gerrit.rockbox.org/496
Reviewed-by: Nils Wallménius <nils@rockbox.org>
When using variadic macros there's no need for IF_MD2/IF_MV2 to deal
with function parameters. IF_MD/IF_MV are enough.
Throw in IF_MD_DRV/ID_MV_VOL that return the parameter if MD/MV, or 0
if not.
Change-Id: I7605e6039f3be19cb47110c84dcb3c5516f2c3eb
The code was broken in a subtle but crucial way: storage idle
callbacks are oneshot so after the first flush everything would
stay in the buffer forever and would never be written to the disk
thus resulting into many events being lost. This changed correctly
registers the idle callback each time the buffer is not empty.
Note that the idle storage code checks if a callback
has is in the queue already so we don't register twice.
Change-Id: Ifdf331d4b757e05b8a6902bf5926cbc7689f5109
This small patch aims to fix a trivial
problem: when exiting the "cube" plugin
in a hosted environment (at least on YP-R0)
this caused the whole program, and consequently
also the player, to be turned off.
I don't know why the exit() function was
used here...
Change-Id: I7b58d4ca5c01c230f2c53204b51ec553c5fe1287
Reviewed-on: http://gerrit.rockbox.org/321
Reviewed-by: Bertrik Sikken <bertrik@sikken.nl>
Last core update for keymaps and manual. Manual is now 100% complete
Change-Id: I9ad33206ecea41a88cba7a355da911fa7ab0455d
Reviewed-on: http://gerrit.rockbox.org/521
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
1) Now that recording is working a few keymaps update are required.
2) also implement the radio.c file so that fm dedicated keymaps
works.
3) implement some missing fm keymaps
4) manual updated accordingly
Change-Id: I40be3e245853ccb9ed7a5bc5a76fe4ed90772272
Reviewed-on: http://gerrit.rockbox.org/513
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
A few keymaps hint were wrong, this correct them:
- database/filemanager on cancelling songs insertion
- alarm clock
- set alarm
Change-Id: Ifb50a9452c208a7d5c28bdac96c825030b943c25
Reviewed-on: http://gerrit.rockbox.org/508
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
Set an alternative touchpad sensitivity setting if
the 3 following variables are defined:
DEFAULT_TOUCHPAD_SENSITIVITY_SETTING
MIN_TOUCHPAD_SENSITIVITY_SETTING
MAX_TOUCHPAD_SENSITIVITY_SETTING
aside from the usual:
HAVE_TOUCHPAD
HAVE_TOUCHPAD_SENSITIVITY_SETTING
In such a case the setting will allow the user to set a precise
value within the defined range unstead of the boolean choice
HIGH/NORMAL
Change-Id: Iba8140285317077381191e494df0d3f6ab556872
Reviewed-on: http://gerrit.rockbox.org/123
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
This change activate the newly implemented fm softlock (thanks to
Pamaury) on the FM Ondio target. Thanks to Lebellium for testing.
Change-Id: I903f05be892e7537a34ba40bc0f3c65541a497a4
Reviewed-on: http://gerrit.rockbox.org/498
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
* Remove explicit tracking of elapsed time of previous track.
* Remove function to obtain auto skip flag.
* Most playback events now carry the extra information instead and
pass 'struct track_event *' for data.
* Tweak scrobbler to use PLAYBACK_EVENT_TRACK_FINISH, which makes
it cleaner and removes the struct mp3entry.
Change-Id: I500d2abb4056a32646496efc3617406e36811ec5
(Take #2)
If .bss wasn't large enough, and .ncdata was empty, .ncbss would be
at an address overlapping the alignment-padded end of .ncdata and
and linking would fail with an overlap error.
Adds plugin load end address that accounts for IRAM going past
the final .bss sections, making IRAM overlay compatible. load_code
could also use this instead of the file size.
The .lds becomes a bit more straightforward and explicit when
assigning addresses.
Change-Id: Id0c33f257710e97ece2c831e0feaaa32c1a14e05
If .bss wasn't large enough, and .ncdata was empty, .ncbss would be
at an address overlapping the alignment-padded end of .ncdata and
and linking would fail with an overlap error.
There also should no longer be an issue that needs special correction
with iramcopy and empty .bss. The .maps look good in that case.
Change-Id: I02bf73a0acef2c0c04b5d135ecf4e18fb97ee339
In sansa clip + with virtual keyboard you can write/rename a stuff and move
your cursor in the filename field. But while your cursor reaches the end/start
of filename it just blocks the movement of cursor and beeps if you enabled the
"Voice Menu" feature. This patch swaps over cursor to the start/end of filename
instead of just blocking movement.
Change-Id: I37450df062df60ef4c0d747c13e448d0adbde05b
Reviewed-on: http://gerrit.rockbox.org/503
Reviewed-by: Michael Giacomelli <giac2000@hotmail.com>
If CPU is not boosted for some reason already, then the stop flush
can take longer than it really ought to.
Change-Id: I0572cc83067749e9945b3eb825f976db21d914f9
Update all .lang files and change the id from LANG_RECORDING_FREQUENCY
to LANG_FREQUENCY. Also update description and target.
It will throw things off for targets without recording but that do
have 48KHz, possibly older iPods. I'm not sure what else it might be
off hand. Regenerate voice files and replace .lang files in that case.
Change-Id: I9ab396ecfcca9206054bde34aa2cc23b505dabff
after unlocking the device while being into FM
radio screen. This patch restores expected behaviour by
forcing screen refresh when receiving the proper event.
Change-Id: Ibe0864ab78619ddf235912d06a2efe3203b5042a
Reviewed-on: http://gerrit.rockbox.org/505
Reviewed-by: Lorenzo Miori <memorys60@gmail.com>
Tested-by: Lorenzo Miori <memorys60@gmail.com>
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
Replaces the NATIVE_FREQUENCY constant with a configurable frequency.
The user may select 48000Hz if the hardware supports it. The default is
still 44100Hz and the minimum is 44100Hz. The setting is located in the
playback settings, under "Frequency".
"Frequency" was duplicated in english.lang for now to avoid having to
fix every .lang file for the moment and throwing everything out of sync
because of the new play_frequency feature in features.txt. The next
cleanup should combine it with the one included for recording and
generalize the ID label.
If the hardware doesn't support 48000Hz, no setting will be available.
On particular hardware where very high rates are practical and desireable,
the upper bound can be extended by patching.
The PCM mixer can be configured to play at the full hardware frequency
range. The DSP core can configure to the hardware minimum up to the
maximum playback setting (some buffers must be reserved according to
the maximum rate).
If only 44100Hz is supported or possible on a given target for playback,
using the DSP and mixer at other samperates is possible if the hardware
offers them.
Change-Id: I6023cf0c0baa8bc6292b6919b4dd3618a6a25622
Reviewed-on: http://gerrit.rockbox.org/479
Reviewed-by: Michael Sevakis <jethead71@rockbox.org>
Tested-by: Michael Sevakis <jethead71@rockbox.org>
Those who have keyclick enabled and are really eagar to record upon
boot can get the samplerate messed up because who gets to set the sample
rate last (recording or mixer) is not currently deterministic.
Change-Id: Icc43ed789cf23f928ca49657cb146445b0c558cb
Basically, just give it a good rewrite.
Software codec recording can be implemented in a more straightforward
and simple manner and made more robust through the better codec
control now available.
Encoded audio buffer uses a packed format instead of fixed-size
chunks and uses smaller data headers leading to more efficient usage.
The greatest benefit is with a VBR format like wavpack which needs
to request a maximum size but only actually ends up committing part
of that request.
No guard buffers are used for either PCM or encoded audio. PCM is
read into the codec's provided buffer and mono conversion done at
that time in the core if required. Any highly-specialized sample
conversion is still done within the codec itself, such as 32-bit
(wavpack) or interleaved mono (mp3).
There is no longer a separate filename array. All metadata goes
onto the main encoded audio buffer, eliminating any predermined
file limit on the buffer as well as not wasting the space for
unused path queue slots.
The core and codec interface is less awkward and a bit more sensible.
Some less useful interface features were removed. Threads are kept
on narrow code paths ie. the audio thread never calls encoding
functions and the codec thread never calls file functions as before.
Codecs no longer call file functions directly. Writes are buffered
in the core and data written to storage in larger chunks to speed up
flushing of data. In fact, codecs are no longer aware of the stream
being a file at all and have no access to the fd.
SPDIF frequency detection no longer requires a restart of recording
or plugging the source before entering the screen. It will poll
for changes and update when stopped or prerecording (which does
discard now-invalid prerecorded data).
I've seen to it that writing a proper header on full disk works
when the format makes it reasonably practical to do so. Other cases
may have incorrect data sizes but sample info will be in tact. File
left that way may play anyway.
mp3_enc.codec acquires the ability to write 'Info' headers with LAME
tags to make it gapless (bonus).
Change-Id: I670685166d5eb32ef58ef317f50b8af766ceb653
Reviewed-on: http://gerrit.rockbox.org/493
Reviewed-by: Michael Sevakis <jethead71@rockbox.org>
Tested-by: Michael Sevakis <jethead71@rockbox.org>
Causes the track change to go in the wrong buffer (and even be missed
by playback) if the current descriptor for the write index is descriptor
0 because the offset used is "-1" upon track change.
Got nailed by implicit conversion of the % operator dividend to unsigned.
Change-Id: I32538db801ac9d790c8b1b5bd041b09ad4b64d2e
The code assumes that gustable[] has 128 entries, while it
only had 120. Since the entries follow a simple pattern (they
seem to be note frequencies, so each entry is the previous one
multiplied by the 2^(1/12)), expanding the table is the simple
fix.
Change-Id: If5b5a50378afd3206c9d550227dd9aac8e355c96
Change-Id: I75efbf1077359e4218ad33f4c1d885b24c0b7b01
Reviewed-on: http://gerrit.rockbox.org/421
Reviewed-by: Jonathan Gordon <rockbox@jdgordon.info>
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
Prevents the player from moving an instadropped block (could happen
before the next game tick when using left/right buttons anticipatorily).
Change-Id: Id62168842d8458f864a2e05c5d236f054bf54f65
Reviewed-on: http://gerrit.rockbox.org/473
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
The code was pretty broken with regard to the handle management of radio art
images, e.g. passing the wrong data to bufopen().
Change-Id: I3480f40bce81af05d14dbf045a78485c857fb261
This logic checks whether the skin's albumart dimensions differ from the
previous skin to force rebuffering if necessary. This was broken since
a while as the necessary information was reset.
Change-Id: I3b9f3a819c6af202af8ad66c13742f704ce45ab1
Reviewed-on: http://gerrit.rockbox.org/476
Tested-by: Thomas Martitz <kugel@rockbox.org>
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
Based on all other references, unknown_file.color is a color, not an
index into custom_colors[]. Previously, custom_colors[-1] was returned
for files without an extension, accessing outside array boundaries
and making files without an extension black, which is hard to see.
Change-Id: Ia0883aba929582324b767df7828a36a84c0b36b9
Further decouples voice_thread.c from other playback areas. Also allows
other audio sources, such as FM radio, to be attenuated when voice is
playing by implementing a callback.
Defined as another playback event rather than a new event class:
PLAYBACK_EVENT_VOICE_PLAYING
Change-Id: I2e3e218be6cd6bebbf39e7883a8c0e4ed42b62bb
What was I thinking? Anyway, it's a little nicer and it's reserved so
shouldn't end up as a case value anywhere.
Change-Id: If745c24951518608e3f4fc51f7419ef07d7cf2ac
Playback needs to receive a couple of settings-related messages even
when not playing.
Put the message reply back where it was when loading an encoder for
recording.
Change-Id: I8cc80f46e42a0afd119991d698510e1ebef38ead
Eliminates the pcmrec thread and keeps playback and recording engine
operation mutually-exclusive.
audio_thread.c contains the audio thread which branches to the
correct engine depending upon the request. It also handles the main
audio initialization.
Moves pcm_init into main.c just before dsp_init because I don't want
that one in audio_init in the new file.
(Also makes revision df6e1bc pointless ;)
Change-Id: Ifc1db24404e6d8dd9ac42d9f4dfbc207aa9a26e1
It should not access audio hardware and change settings unless it has
been initialized first and given control of it.
Change-Id: I5004602d7caa604ded751f6838b792d1ff24b3fb
Boost only for tests and unboost immediately afterwards. It was leaving
the CPU boosted after exiting.
Change-Id: I010c4b975bd27e8990dc057ddd244dab233411ca
DSP_SWITCH_FREQUENCY has been deprecated and the same enumerated value
as DSP_SET_FREQUENCY since major DSP revisions were committed. This
task should have been performed much earlier but, oh well, do it now.
Change-Id: I3f30d651b894136a07c7e17f78fc16a7d98631ff
