Commit graph

574 commits

Author SHA1 Message Date
Thomas Martitz
12a0ed3b8d Commit FS#9724, which reworks the preprocessor defines related to backlight fading to a CONFIG_BACKLIGHT_FADING style. The apps/ code will only see which setting is supposed to be used, specific backlight fading handling is kept in firmware, slightly reword the manual text about software fading too with regards to the Gigabeat S
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19860 a1c6a512-1295-4272-9138-f99709370657
2009-01-26 23:21:49 +00:00
Michael Sevakis
753b7a90e1 Gigabeat S: Add remote control reading and proper headphone insert detection. We need keymaps! A few were copied straight from Gigabeat F/X just to get things worked out.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19830 a1c6a512-1295-4272-9138-f99709370657
2009-01-23 20:55:17 +00:00
Thomas Martitz
81df953da5 Rename software backlight fading files, as we don't call it thread fading. Correct a copyright info too.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19818 a1c6a512-1295-4272-9138-f99709370657
2009-01-22 10:50:11 +00:00
Maurus Cuelenaere
29b136b82d Onda VX747:
* Get USB working (it isn't good at writing support though)
  * Clean up NAND & SD a bit
  * Other comments/fixes
Ingenic Jz4740/MIPS:
  * Split MMU from system


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19815 a1c6a512-1295-4272-9138-f99709370657
2009-01-21 20:58:33 +00:00
Michael Sevakis
7d7969114d c200v1/e200v1: Add battery charging. This should be usable on v2 players but those should be evaluated for current, endpoint voltage and whether or not accurate battery readings may always be obtained (which determines algorithm setup and behavior).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19748 a1c6a512-1295-4272-9138-f99709370657
2009-01-11 10:07:22 +00:00
Michael Sevakis
4ed78f5c72 Clean up panicf and introduce system_exception_wait to do further target tasks and wait for a button when an unrecoverable error has occurred (panic, UIE, etc.). Returning from that function should reboot or don't return from it. Move UIE and __div0 for ARM to its own file.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19716 a1c6a512-1295-4272-9138-f99709370657
2009-01-08 10:15:32 +00:00
Michael Sevakis
e2876ee4e2 Gigabeat S: Get timer API working. metronome will work now.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19676 a1c6a512-1295-4272-9138-f99709370657
2009-01-05 00:00:29 +00:00
Bertrik Sikken
4c00b666a7 Group source files common to all current as3525 targets under '#if CONFIG_CPU == AS3525'.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19668 a1c6a512-1295-4272-9138-f99709370657
2009-01-04 15:48:33 +00:00
Michael Giacomelli
c97f640060 Commit FS#9679 by Thomas Martitz. Adds c200v2 to the target tree. Has some buttons defined, a bootloader, and stubs for most drivers.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19574 a1c6a512-1295-4272-9138-f99709370657
2008-12-24 04:10:18 +00:00
Vitja Makarov
19413fc806 iaudio7: add battery voltage monitoring
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19549 a1c6a512-1295-4272-9138-f99709370657
2008-12-21 19:16:54 +00:00
Maurus Cuelenaere
9da2456c26 Fix SVN properties
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19482 a1c6a512-1295-4272-9138-f99709370657
2008-12-19 11:29:18 +00:00
Maurus Cuelenaere
40ec543052 * Add support for Onda VX747+ (FS#9674 by Olivier Barbut)
* Fix Onda VX767 support
 * Small cleanup


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19481 a1c6a512-1295-4272-9138-f99709370657
2008-12-19 11:13:58 +00:00
Mark Arigo
9bf93ba007 Working touchpad for the Philips HDD1630 using the Synaptics driver. Like the m:robe 100, the strip is divided into up, select, and down button regions. You can't swipe like in the OF. The keymap still needs some work.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19480 a1c6a512-1295-4272-9138-f99709370657
2008-12-19 03:31:26 +00:00
Bertrik Sikken
a6c62a218a Renamed as3525-codec.c to ascodec-as3525.c to bring it in line with the naming convention of the other driver
files.


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19469 a1c6a512-1295-4272-9138-f99709370657
2008-12-17 20:16:20 +00:00
Mark Arigo
f2b66918e6 Move the Synaptics touchpad driver for the m:robe 100 to a common place. It will (soon) be used for the Philips HDD1630.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19465 a1c6a512-1295-4272-9138-f99709370657
2008-12-17 04:38:53 +00:00
Bertrik Sikken
c7c546cf59 AMS Sansa: add fmradio i2c support for e200v2 and the fuze, by Thomas Martitz and Michael Chicoine
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19463 a1c6a512-1295-4272-9138-f99709370657
2008-12-16 22:58:47 +00:00
Bertrik Sikken
ebf316f39d Sansa Clip: add sources for radio i2c communication.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19437 a1c6a512-1295-4272-9138-f99709370657
2008-12-14 17:36:35 +00:00
Dominik Wenger
a654946622 correct battery readout for m200v4. Percentage is still uncalibrated.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19420 a1c6a512-1295-4272-9138-f99709370657
2008-12-13 15:57:41 +00:00
Nils Wallménius
65f61d6cce FS#9609 FM radio support for the Gigabeat S, seeking/scanning is not yet
implemented but manual tuning works nicely. Thanks to Rafaël Carré,
Bertrik Sikken and Robert Menes for suggestions and debugging help.



git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19372 a1c6a512-1295-4272-9138-f99709370657
2008-12-09 20:48:04 +00:00
Dominik Wenger
02184a242e make fmradio-i2c code from clip more generic, so it works for m200v4 and hopefully all other as3525 targets.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19370 a1c6a512-1295-4272-9138-f99709370657
2008-12-09 17:21:16 +00:00
Michael Sevakis
ea929a3e45 Have drivers merged for WM8711/21/31 since they are so similar but respect all register differences between codecs. Change minis to #define the actual codec type. If anything breaks check if OSCPD and CLKOUTPD need to be clear for the target- H10 is fine. A nice naming convention suggestion for WM codec multidrivers would be welcome rather than naming for a specific chip.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19367 a1c6a512-1295-4272-9138-f99709370657
2008-12-08 21:09:56 +00:00
Bertrik Sikken
d9116da5de Move Clip specific power management stuff (specifically the battery discarge curve) to powermgmt-clip.c
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19303 a1c6a512-1295-4272-9138-f99709370657
2008-12-02 19:50:31 +00:00
Frank Gevaerts
caaf3c0b97 Move tcc77x/usb-tcc77x.c to usb-tcc.c as it is more general than just tcc77x (even usb-tcc is too specific, but I don't know anything better)
Add #if0ed USB defines to config-cowond2.h, so experimenting with USB is easy
Add dummy set_serial_descriptor() implementation to usb_core.c. This one doesn't generate a unique serial, so it must never be used for non-testing purposes. When usaed, a compiler warning will be generated


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19273 a1c6a512-1295-4272-9138-f99709370657
2008-11-30 15:43:15 +00:00
Rafaël Carré
81fe625a62 Sansa Clip: grey lib support (not calibrated yet)
Declare HAVE_LCD_INVERT
Put the framebuffer into IRAM

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19249 a1c6a512-1295-4272-9138-f99709370657
2008-11-27 21:07:54 +00:00
Steve Bavin
f684726580 Add software backlight fading for E100/H300/X5/D2, by Thomas Martitz and others - see FS#6800 for credits.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19221 a1c6a512-1295-4272-9138-f99709370657
2008-11-26 08:26:13 +00:00
Rafaël Carré
c1f90b1881 Sansa AMS: Use DMA for SD transfers (read and write)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19211 a1c6a512-1295-4272-9138-f99709370657
2008-11-25 13:38:32 +00:00
Dave Chapman
e25c1c6e43 Add more driver stubs to make the Fuze and e200v2 main builds compile; Correct the memory definition for the Fuze (8MB)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19090 a1c6a512-1295-4272-9138-f99709370657
2008-11-11 14:46:13 +00:00
Frank Gevaerts
e86d651647 make the meizu bootloaders compile again with the new storage infrastructure
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19088 a1c6a512-1295-4272-9138-f99709370657
2008-11-11 14:11:49 +00:00
Rafaël Carré
02dfae031a Sansa AMS: use the AS3514 ADC driver
Move the ADC defines to as3514.h, and make adc-target.h only include as3514.h
Implement the missing API (ascodec_readbytes, ascodec_(un)lock)

Revert the changes to the PP-specific arm/ascodec-target.h in r19073,
use a AS3525 specific ascodec-target.h while moving the AS3514 specific
code in export/as3514.h

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19076 a1c6a512-1295-4272-9138-f99709370657
2008-11-10 20:55:56 +00:00
Rafaël Carré
81b2ffb63e AMS Sansa (formerly 'V2') use the as3514 RTC
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19072 a1c6a512-1295-4272-9138-f99709370657
2008-11-10 18:18:27 +00:00
Rafaël Carré
6b566568eb Fix Clip firmware building by adding missing symbols
Implement some of the new functions
Use as3514 rtc
Add AS3525 case in rolo.c
Copy card_get_info_target() from ata-sd-pp.c , and use the correct 32bits words order

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19064 a1c6a512-1295-4272-9138-f99709370657
2008-11-10 11:04:43 +00:00
Daniel Stenberg
044ba22b93 "mv m200v2 m200v4"
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19060 a1c6a512-1295-4272-9138-f99709370657
2008-11-10 09:27:40 +00:00
Rafaël Carré
baecdb632c AS3525: use kernel_init() in bootloader
This way creation of scrolling thread doesn't risk crashing the system

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19026 a1c6a512-1295-4272-9138-f99709370657
2008-11-06 02:31:40 +00:00
Maurus Cuelenaere
4af26e7e98 Onda VX747:
* Commit (premature) SD, USB & audio drivers
 * Fix ramdisk.c mistake
 * Add battery readout


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19011 a1c6a512-1295-4272-9138-f99709370657
2008-11-05 00:24:46 +00:00
Frank Gevaerts
214cd81f08 Add ramdisk storage driver. It will be useful for developing multi-driver storage
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18993 a1c6a512-1295-4272-9138-f99709370657
2008-11-03 20:52:27 +00:00
Frank Gevaerts
99d39f5c3a put stubs in the proper place
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18978 a1c6a512-1295-4272-9138-f99709370657
2008-11-02 02:19:39 +00:00
Frank Gevaerts
8d68a567e4 add proper dummy storage implementation for sims
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18977 a1c6a512-1295-4272-9138-f99709370657
2008-11-02 02:01:57 +00:00
Frank Gevaerts
430343bca7 implement single-driver storage layer with macros instead of inlines
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18975 a1c6a512-1295-4272-9138-f99709370657
2008-11-02 01:14:46 +00:00
Dave Chapman
2a5d491480 Unify the e200v2 and Fuze backlight/buttonlight code - it is identical.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18966 a1c6a512-1295-4272-9138-f99709370657
2008-11-01 22:05:35 +00:00
Frank Gevaerts
2f8a0081c6 Apply FS#9500. This adds a storage_*() abstraction to replace ata_*(). To do that, it also introduces sd_*, nand_*, and mmc_*.
This should be a good first step to allow multi-driver targets, like the Elio (ATA/SD), or the D2 (NAND/SD).


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18960 a1c6a512-1295-4272-9138-f99709370657
2008-11-01 16:14:28 +00:00
Dave Chapman
74c75e5c04 Add Sansa Fuze to the build system, including a first (untested) attempt at an LCD driver. Lots of things are just copied from the e200v2, so this code needs testing, and then drivers properly merged if they prove to be the same.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18957 a1c6a512-1295-4272-9138-f99709370657
2008-11-01 10:29:23 +00:00
Rafaël Carré
603a9c7c7d Clip: add backlight and buttonlight code
Revive lcd_enable() as well, and use it in _backlight_on/off()
Don't update the lcd framebuffer if the display is off

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18952 a1c6a512-1295-4272-9138-f99709370657
2008-10-31 22:02:41 +00:00
Frank Gevaerts
19d1cacb1a cleanup storage defines
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18950 a1c6a512-1295-4272-9138-f99709370657
2008-10-31 21:25:04 +00:00
Dave Chapman
42f77d4eb0 Abstract the PortalPlayer AS3514 handling with an "ascodec" API - inspired by the wmcodec API used with the Wolfson codecs. The intention is to implement this API for the AS3525 and then share code with the Sansa V2 ports.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18940 a1c6a512-1295-4272-9138-f99709370657
2008-10-31 00:16:42 +00:00
Rafaël Carré
e1b4838481 Embryo of a SD driver for Sansav2
Debug code included, needed until the bootloader is ready

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18926 a1c6a512-1295-4272-9138-f99709370657
2008-10-29 20:21:59 +00:00
Michael Sevakis
48544f070b Move kernel tick initialization and handling to the target tree for ones remaining in kernel.c
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18919 a1c6a512-1295-4272-9138-f99709370657
2008-10-29 10:26:46 +00:00
Dave Chapman
8df1a7e29a e200v2: implement the backlight handling (copy/paste from the c200v1/e200v1 code - this should probably be unified, along with other upcoming v2 code), plus clean up the lcd init by calling lcd_init() directly in the bootloader, instead of lcd_init_device().
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18910 a1c6a512-1295-4272-9138-f99709370657
2008-10-29 01:42:03 +00:00
Bertrik Sikken
95726a5c23 FS#9503 - Sansa v2 audio/PMU communication driver (for the AS3525 SoC)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18886 a1c6a512-1295-4272-9138-f99709370657
2008-10-26 13:28:52 +00:00
Dave Chapman
08c41d42bb Add e200v2 and m200v2 targets. Move the telechips lcd-ssd1815.c (currently used by Logik DAX and m200v1 ports) driver up in the target tree and share with the m200v2 - as2525 parts contributed by Rafael Carre. Includes the start (but is still very incomplete) of an LCD driver for the e200v2. m200v2 is not yet fully supported by mkamsboot - that will come soon. Also some minor cleanups for the Clip.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18836 a1c6a512-1295-4272-9138-f99709370657
2008-10-19 14:11:01 +00:00
Frank Gevaerts
49ec9ea190 Make the meizu m3 load from flash, so interrupts work. More work is needed to get the m6sl "working" again
(patch by Denes Balatoni, FS#9499)


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18827 a1c6a512-1295-4272-9138-f99709370657
2008-10-18 22:28:59 +00:00
Björn Stenberg
51b45d5602 Split id3.c/h into metadata.c/h and metadata/mp3.c. Updated all references. Moved mp3data.c/h from firmware to apps.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18814 a1c6a512-1295-4272-9138-f99709370657
2008-10-15 06:38:51 +00:00
Björn Stenberg
9558c4956d Moved pcm_record from firmware to apps. Cleaned up some. Now all code using struct mp3entry is in apps.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18807 a1c6a512-1295-4272-9138-f99709370657
2008-10-14 11:12:20 +00:00
Dave Chapman
80cdc34a54 Rename the clip directory to sansa-clip to be consistent with the first (PortalPlayer) Sansa ports
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18786 a1c6a512-1295-4272-9138-f99709370657
2008-10-12 18:07:23 +00:00
Dave Chapman
da8bff107e Commit FS#9467 - initial work on port to Sansa Clip by Rafaël Carré and François Dinel. A few cosmetic changes were made by me prior to committing: 1) TAB policing in button-clip.c; 2) Add François Dinel to CREDITS; 3) Add François Dinel as (C) holder in button-target.h (it was previously blank); 4) Add Rockbox header to bootloader/sansa_as3525.c with Rafaël Carré as (C) holder; 5) Change target_id to 50 (next available number) in tools/configure and fixed indentation; 6) Change MODEL_NUMBER in config-clip.h to 50 (next available number); 7) Remove unused in/out macros from system-target.h
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18782 a1c6a512-1295-4272-9138-f99709370657
2008-10-12 16:46:01 +00:00
Dave Chapman
e0f8c31216 Move the S5L8700 (Meizu) crt0.S file up one level - it can be used as a generic ARM crt0.S (the uncommitted patch for the Sansa V2s uses it).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18775 a1c6a512-1295-4272-9138-f99709370657
2008-10-11 18:15:42 +00:00
Björn Stenberg
e76c69f3e4 Moved id3.c, mpeg.c and replaygain.c from firmware/ to apps/. This is the first step in separating the generic metadata code and the id3-specific code.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18760 a1c6a512-1295-4272-9138-f99709370657
2008-10-10 13:12:28 +00:00
Dave Chapman
85807cd44e Trivial changes to make the main Rockbox builds for the Sansa m200 and Logik DAX ports compile. Note that some codecs are currently disabled (due to lowmem on these targets), but that needs more work and analysis to decide how much RAM we want to allocate to codecs.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18566 a1c6a512-1295-4272-9138-f99709370657
2008-09-22 19:15:18 +00:00
Marcoen Hirschberg
48e45f5751 add Meizu M6SP and M3 ports
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18544 a1c6a512-1295-4272-9138-f99709370657
2008-09-17 23:22:11 +00:00
Jens Arnold
3a2bc2a617 Make Ondio builds without multivolume and hotswap support compile again (only relevant for testing purposes).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18533 a1c6a512-1295-4272-9138-f99709370657
2008-09-16 17:42:36 +00:00
Frank Gevaerts
1898ff753f * move qt1106 specific things to their own files
* use CHANGE pin


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18496 a1c6a512-1295-4272-9138-f99709370657
2008-09-11 18:18:40 +00:00
Dave Chapman
d462a64a91 Initial commit of iaudio 7 port by Vitja Makarov (FS#9245). Port is at quite an advanced stage, but is troubled by the lack of a reliable NAND driver (similar to the Cowon D2 port) and is not yet suitable for non-developers.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18435 a1c6a512-1295-4272-9138-f99709370657
2008-09-06 17:50:59 +00:00
Maurus Cuelenaere
e144638167 Add Onda VX767 target
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18422 a1c6a512-1295-4272-9138-f99709370657
2008-09-05 15:09:40 +00:00
Maurus Cuelenaere
62c4a2838e Onda VX747:
* Overall cleanup (still needs work)
  * Add preliminary USB support
  * Add power off support
  * Add preliminary MMU handling


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18348 a1c6a512-1295-4272-9138-f99709370657
2008-08-26 21:48:49 +00:00
Maurus Cuelenaere
4bf4d2bb55 * Get interrupts working (but crashes after 10-30secs)
* Make current_tick increase
* Convert button driver into SADC driver
* Make touchscreen handling work better (still needs good calibration routine)


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18240 a1c6a512-1295-4272-9138-f99709370657
2008-08-10 21:44:48 +00:00
Maurus Cuelenaere
447ffc8bf8 * Add interrupt handling (but still not working)
* Clean up linker script and bootup routines


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18229 a1c6a512-1295-4272-9138-f99709370657
2008-08-09 23:31:38 +00:00
Rob Purchase
3352b265e6 Update the Telechips NAND driver to use the nand_identify() function introduced in r18052.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18063 a1c6a512-1295-4272-9138-f99709370657
2008-07-15 21:32:20 +00:00
Maurus Cuelenaere
ebb612fbcc Onda VX747:
1) Improve touchscreen handling
2) Add RTC driver
4) Add NAND Flash ID scanning
3) Other minor fixes

Nand_ID:
Add a generic NAND ID database (currently only containg Samsung chips)


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18052 a1c6a512-1295-4272-9138-f99709370657
2008-07-15 17:17:01 +00:00
Maurus Cuelenaere
0709f0a5c6 Add preliminary support for the Onda VX747 (MIPS target)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18032 a1c6a512-1295-4272-9138-f99709370657
2008-07-14 15:03:10 +00:00
Rob Purchase
ee72b3bbc6 Make the TCC780x NAND driver also build for 77x targets. This is work-in-progress stuff and does not yet work fully on 77x, but it's a step in the right direction. Also replace some magic numbers with #defines.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18019 a1c6a512-1295-4272-9138-f99709370657
2008-07-12 23:01:49 +00:00
Marcoen Hirschberg
7b10ef9a7c initial Meizu M6SL port (take 2)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17819 a1c6a512-1295-4272-9138-f99709370657
2008-06-27 23:24:34 +00:00
Mark Arigo
22e7bf32b8 My Devcon 2008 contribution: port for Philips GoGear HDD1630 (PP5022-based). Current status is that the bootloader works to load Rockbox, but dual boot does not work: it freezes after decrypting the OF. When Rockbox boots, it freezes somewhere between showing the logo and the main menu. And there's no driver for the touchpad. So lots of work left.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17809 a1c6a512-1295-4272-9138-f99709370657
2008-06-27 18:40:25 +00:00
Rob Purchase
d6159ea7d7 Initial D2 sound playback support (known issues to follow on the CowonD2Info wiki page).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17753 a1c6a512-1295-4272-9138-f99709370657
2008-06-22 18:48:22 +00:00
Marc Guay
b93667b306 Add the Sansa c100 as a build target with basic drivers.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17742 a1c6a512-1295-4272-9138-f99709370657
2008-06-21 15:18:36 +00:00
Michael Sevakis
a9c20f5789 Gigabeat S:
1) Rework event handling and static registration mechanism. No target-
     specific code in mc13783 driver. GPIO event driver interfaces more
     cleanly.

  2) Somewhat related - enable thread priority for bootloader which is
     desireable here (ffs is used for GPIO event enabling  anyway and that
     goes along with priority).


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17593 a1c6a512-1295-4272-9138-f99709370657
2008-05-21 08:42:11 +00:00
Mark Arigo
b4275d4941 Philips GoGear SA9200 port. Working bootloader and normal builds, including sound. No touchpad now, buttons limited to using vol+/vol-/power for up/down/select. Rockbox USB is enabled since the OF is MTP only...read the warnings on the PortalPlayerUsb wiki page.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17591 a1c6a512-1295-4272-9138-f99709370657
2008-05-21 03:55:17 +00:00
Maurus Cuelenaere
e031db4b87 1) Use a separate config-<target>.h for Zen Vision(:M) (60GB)
2) Other unrelated cleanups


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17503 a1c6a512-1295-4272-9138-f99709370657
2008-05-14 18:55:19 +00:00
Mark Arigo
7656748221 Preparing for the Philips SA9200 part 1. Move the Sansa ADC & ATA drivers up one level.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17487 a1c6a512-1295-4272-9138-f99709370657
2008-05-13 01:53:19 +00:00
Michael Sevakis
6dd6ea74af Gigabeat S RoLo: Properly execute firmware copy from an IRAM stub because the currently running image was being overwritten in place. Minor tweak to rolo.c based on imx31 errata sheet about not masking FIQ without masking IRQ which is fine to use on all ARM anyway.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17414 a1c6a512-1295-4272-9138-f99709370657
2008-05-08 12:09:14 +00:00
Maurus Cuelenaere
e025cb1c38 Split up DMA and ATA, but don't enable it (yet).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17386 a1c6a512-1295-4272-9138-f99709370657
2008-05-05 15:47:26 +00:00
Maurus Cuelenaere
a6b31f18c8 1) add support for ata-as-arm
2) remove obsolete audio-creativezvm.c
3) fix registers in i2c-dm320.c


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17316 a1c6a512-1295-4272-9138-f99709370657
2008-05-03 13:43:26 +00:00
Dave Chapman
f2042983f0 Add the Sansa M200 (v1) as a target - it's extremely similar to the Logik DAX (the LCD driver worked unchanged). Plus various tcc77x work, including a working tick interrupt (enabled in the bootloader). Rockbox itself builds for the M200 (there are no keymaps yet for the DAX), but doesn't progress very far due to the lack of an ATA (NAND flash) driver.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17306 a1c6a512-1295-4272-9138-f99709370657
2008-05-02 19:12:09 +00:00
Jonathan Gordon
17f7adb90d get rid of the last mr500 yellow (again :p )
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17273 a1c6a512-1295-4272-9138-f99709370657
2008-04-28 02:19:23 +00:00
Jonathan Gordon
d20d9dd6e4 add more registers for the tsc2100
hopefully working volume control, mute definatly works.


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17259 a1c6a512-1295-4272-9138-f99709370657
2008-04-27 13:43:05 +00:00
Michael Sevakis
27fac88548 Gigabeat S: Implement i2c driver - transmit works but no testing of receiving which will get a chance later. Add some seeds for codec driver. Correct a few #defines.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17254 a1c6a512-1295-4272-9138-f99709370657
2008-04-27 10:30:54 +00:00
Dave Chapman
fec6af659f Move the Telechips TCC77x SSD1815 LCD driver up a level in the target tree - it isn't specific to the DAX.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17253 a1c6a512-1295-4272-9138-f99709370657
2008-04-27 08:30:14 +00:00
Frank Gevaerts
bec6aa3176 - change the usb class driver framework to allow for device classes with more than one interface or more than one endpoint pair
- move the charging-only dummy driver out of usb_core



git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17252 a1c6a512-1295-4272-9138-f99709370657
2008-04-26 19:02:16 +00:00
Maurus Cuelenaere
95167e0177 Commit whole Creative Zen Vision:M target tree + all related firmware/
changes.


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17241 a1c6a512-1295-4272-9138-f99709370657
2008-04-24 20:08:28 +00:00
Michael Sevakis
ac387d4d5c Add a PMIC-based RTC driver for Gigabeat S.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17236 a1c6a512-1295-4272-9138-f99709370657
2008-04-24 09:22:39 +00:00
Rob Purchase
fd773cbda6 A few preparations for the D2 PCM driver: move driver up to TCC780x level, move FIQ handler into PCM driver, add some new register defines, and remove those goddamn warnings.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17209 a1c6a512-1295-4272-9138-f99709370657
2008-04-21 20:16:18 +00:00
Michael Sevakis
94f7d0f290 UMS for the Gigabeat S. Bootloader USB mode. Has a couple quirks 1) First plug has problems if cold. Replug if it doesn't connect or not at high speed 2) Linux doesn't like the odd bootable flag value used in the partitions so it won't mount but Windows works. Fix minor OTG driver bugs and clean up device memory handling. Generic name for ARC controller driver.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17154 a1c6a512-1295-4272-9138-f99709370657
2008-04-18 16:42:50 +00:00
Michael Sevakis
a7af9e4a7f Add GPIO manager. Get the PMIC interrupt handling working (along with power button and HP detect). Add some reg field defined instead of using raw numbers. Add PMIC info to debug ports screen. Refine PMIC driver ops a little bit.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17086 a1c6a512-1295-4272-9138-f99709370657
2008-04-12 16:56:45 +00:00
Michael Sevakis
57742e0ef7 Add a "View I/O Ports" screen for imx31. Show all GPIO contents.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17072 a1c6a512-1295-4272-9138-f99709370657
2008-04-11 15:49:48 +00:00
Michael Sevakis
0b1d7e76d7 Serial driver for imx31. Perhaps not 100% but maybe 80-90% (future developments will tell). Factor-out the mc13783 stuff and make that driver a layer above the SPI. TODO: start processing PMIC interrupts. Start a clkctl API for imx31 (we'll see if this sticks around but it seems reasonable here). Misc. stuff for convenience/neatness.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17070 a1c6a512-1295-4272-9138-f99709370657
2008-04-11 08:51:27 +00:00
Jens Arnold
ece03129b6 Make the greyscale library work on the m:robe 100. Testing on target done by Robert Kukla & Dominik Riebeling.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17028 a1c6a512-1295-4272-9138-f99709370657
2008-04-07 21:14:29 +00:00
Jens Arnold
9737fc7c26 Iriver remote LCD driver: * Split out assembler parts. * Reintroduced the 2 transfer routine variants (low/high CPU clock), and made the version for high CPU clock a little slower because there were problems reported. The function can be slowed down more if there are still problems.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17006 a1c6a512-1295-4272-9138-f99709370657
2008-04-06 23:57:37 +00:00
Rob Purchase
91202e1804 D2: Adjustable backlight brightness (sometimes fails when boosted, suggests I2C timing needs adjustment). Tweak lcd_enable() to behave more like other targets.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16967 a1c6a512-1295-4272-9138-f99709370657
2008-04-04 20:55:58 +00:00
Rob Purchase
9b691d335a Split out the PCF5060x register defines into a common header and create a generic pcf50606.c using standard i2c read/writes.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16966 a1c6a512-1295-4272-9138-f99709370657
2008-04-04 20:24:08 +00:00
Michael Sevakis
52527a4d1d Fix red and clean up meg-fx firmware sources. Remove an unused file.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16887 a1c6a512-1295-4272-9138-f99709370657
2008-03-30 06:06:43 +00:00
Marcoen Hirschberg
b2ec13d8f1 Revert "initial Meizu M6SL port"
This reverts commit b7bd17ce1715c3a8acbf74a63694c28b6075da5b.


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16846 a1c6a512-1295-4272-9138-f99709370657
2008-03-27 11:53:51 +00:00
Marcoen Hirschberg
f8690231bf cleanup some ifdefs
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16845 a1c6a512-1295-4272-9138-f99709370657
2008-03-27 11:29:27 +00:00
Marcoen Hirschberg
c7e5d78241 initial Meizu M6SL port
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16844 a1c6a512-1295-4272-9138-f99709370657
2008-03-27 11:29:24 +00:00
Marcoen Hirschberg
be40427bae use HAVE_ATA to decide if ata.c should be compiled
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16842 a1c6a512-1295-4272-9138-f99709370657
2008-03-27 10:58:36 +00:00
Jens Arnold
74d678fdbc Back-ported the iAudio remote LCD driver optimisations to X5 and M5.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16810 a1c6a512-1295-4272-9138-f99709370657
2008-03-26 00:38:40 +00:00
Jens Arnold
40919d7db2 iAudio M3: Optimised LCD driver, with more/better assembly code. Speedup is ~80% when boosted, ~15% when unboosted. Also implemented grey phase blitting. * Adapted the greyscale library, and the plugins using it. * Fixed a bug in greyscale scroll down for vertically packed pixels.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16809 a1c6a512-1295-4272-9138-f99709370657
2008-03-25 23:21:36 +00:00
Jens Arnold
1f4bcc86da Revert accidental tree commit. /me needs a smaller enter key...
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16805 a1c6a512-1295-4272-9138-f99709370657
2008-03-25 19:57:23 +00:00
Jens Arnold
9a7978aeab Cabbiev2 gigabeat background: reduce WPS backdrop filesize by storing it as 24 bit BMP instead of unnecessary 32 bit.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16802 a1c6a512-1295-4272-9138-f99709370657
2008-03-25 19:43:08 +00:00
Michael Sevakis
27cf677339 Add a complete priority inheritance implementation to the scheduler (all mutex ownership and queue_send calls are inheritable). Priorities are differential so that dispatch depends on the runnable range of priorities. Codec priority can therefore be raised in small steps (pcmbuf updated to enable). Simplify the kernel functions to ease implementation and use the same kernel.c for both sim and target (I'm tired of maintaining two ;_). 1) Not sure if a minor audio break at first buffering issue will exist on large-sector disks (the main mutex speed issue was genuinely resolved earlier). At this point it's best dealt with at the buffering level. It seems a larger filechunk could be used again. 2) Perhaps 64-bit sims will have some minor issues (finicky) but a backroll of the code of concern there is a 5-minute job. All kernel objects become incompatible so a full rebuild and update is needed.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16791 a1c6a512-1295-4272-9138-f99709370657
2008-03-25 02:34:12 +00:00
Rob Purchase
b8b03370e4 D2: Implement LCD driver framebuffer as per E200/Gigabeat F. Kill a few warnings.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16763 a1c6a512-1295-4272-9138-f99709370657
2008-03-23 19:56:11 +00:00
Jens Arnold
c6b6bad18f iAudio M3: ADC driver, making buttons and battery voltage reading work. * Disable the multi-colour LED for now to save power. Proper handling will be added later. * Make reboot on button press work on iAudio X5, M5, M3 in panicf(), and on M3 in UIE().
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16684 a1c6a512-1295-4272-9138-f99709370657
2008-03-17 00:19:23 +00:00
Miika Pekkarinen
19c6e66c13 Implement the playback event handling as a system-wide multi-purpose event system. Unified mpeg.c and playback.c audio event handling. Converted ata_idle_notify to use the new event handling system also.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16682 a1c6a512-1295-4272-9138-f99709370657
2008-03-16 13:55:16 +00:00
Jens Arnold
8a6291dd63 More iAudio M3 work. Target build compiles, but same problem regarding plugins as the simulator. Boots to the menu, but it can't be used yet because only main & remote Play button work. USB works.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16660 a1c6a512-1295-4272-9138-f99709370657
2008-03-14 08:54:54 +00:00
Jens Arnold
2b5f9aec64 Make ATA work on M3.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16650 a1c6a512-1295-4272-9138-f99709370657
2008-03-12 23:36:05 +00:00
Jens Arnold
769fcbd4d9 More iAudio M3 work. Bootloader compiles, but doesn't work yet.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16645 a1c6a512-1295-4272-9138-f99709370657
2008-03-12 20:35:42 +00:00
Nils Wallménius
d1fadb28f8 Move some sh specific assembler files into the target tree
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16516 a1c6a512-1295-4272-9138-f99709370657
2008-03-04 16:02:19 +00:00
Frank Gevaerts
f8a5a40301 remove usb_benchmark. Its usefulness is extremely limited, and the usb stack around it is moving fast, so it's likely to suffer from bit rot very soon.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16500 a1c6a512-1295-4272-9138-f99709370657
2008-03-03 17:59:58 +00:00
Frank Gevaerts
411b92948a move the ifp7xx usb serial driver files to more specific names, to make the "usb_serial" name available for more general usb class driver use
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16484 a1c6a512-1295-4272-9138-f99709370657
2008-03-02 18:16:24 +00:00
Christian Gmeiner
8140705e99 revert done
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16329 a1c6a512-1295-4272-9138-f99709370657
2008-02-17 18:13:58 +00:00
Christian Gmeiner
78fa347c6b FS#8611: move hw_info for pp targets into target tree
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16324 a1c6a512-1295-4272-9138-f99709370657
2008-02-17 12:43:23 +00:00
Michael Sevakis
1f021af60c Gigabeat S mixer: Make some progress. Get the tick and core sleep working using the AVIC. Redo the startup code to remap from IRAM and not include the lcd driver frambuffer in the remapping (until it can be moved). Clean up LCD driver. For other misc. changes, see the diffs. Now it progresses to ATA init and fails with -11 but without crashing or hanging. Replace all bootloaders.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16216 a1c6a512-1295-4272-9138-f99709370657
2008-02-05 04:43:19 +00:00
Robert Kukla
9dc67828a9 mrobe 100: real time clock (if anybody recognises the RTC chip let me know)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16208 a1c6a512-1295-4272-9138-f99709370657
2008-02-03 18:15:39 +00:00
Michael Sevakis
f8709ac7e2 H10 20GB: Assembly YUV blitting and dithering.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16171 a1c6a512-1295-4272-9138-f99709370657
2008-01-26 14:24:09 +00:00
Rob Purchase
47ea030e2e Initial Cowon D2 commit:
* bootloader test program (basic LCD & button drivers, reads touchscreen)
* work-in-progress stubs for main build


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16090 a1c6a512-1295-4272-9138-f99709370657
2008-01-14 22:04:48 +00:00
Robert Kukla
a615aabc33 - share adc reading code between h10 and mrobe100
- battery voltage calibrated and used for mrobe100 


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16064 a1c6a512-1295-4272-9138-f99709370657
2008-01-12 20:36:45 +00:00
Jens Arnold
41cd44caa7 Greyscale ipod lcd driver: * Assembler optimised low level functions. PP5002 targets benefit most (lcd_update() speedup >50%, and the greyscale overlay no longer makes mp3 playback skip). * Consistent brace placement style.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16060 a1c6a512-1295-4272-9138-f99709370657
2008-01-12 00:59:18 +00:00
Mark Arigo
e66ddd754f Initial commit for the Olympus m:robe 100 port (PP5020). The LCD driver works. The ADC driver was copied from the H10 port (they can probably be combined later), but the battery readings aren't right and it shuts down. The touch pad buttons do not work. Install the bootloader and rockbox the H10 way. Still lots of work to do.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16030 a1c6a512-1295-4272-9138-f99709370657
2008-01-09 07:24:43 +00:00
Will Robertson
32f6109fb1 Gigabeat S memory management stuff.
* Moved crt0.S to imx31 subdirectory, as it was the last target using the unified file.
* DRAM is now remapped to 0x0, facilitating interrupts (which aren't done yet)


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15965 a1c6a512-1295-4272-9138-f99709370657
2007-12-23 12:19:40 +00:00
Will Robertson
383a32a7ae Gigabeat S now uses the shared ARM MMU code rather than the (mostly duplicated) private code. No functional change.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15961 a1c6a512-1295-4272-9138-f99709370657
2007-12-23 03:47:28 +00:00
Christian Gmeiner
94be71eab5 Add a working serial driver to usb stack. At the moment it simply echos back what it gets. You can test it on linux by
0) change relevant defines in usb_core.c
1) modprobe usbserial vendor=0x0781 product=0x7421 debug=1
2) picocom /dev/ttyUSB0
3) look at your logf screen if you build with logf support and enabled LOGF_ENABLE define in usb_serial.c
I also modified usb_core so that storage and serial both can make use the the 'usb_core'-thread. More will come :)


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15850 a1c6a512-1295-4272-9138-f99709370657
2007-11-30 00:13:00 +00:00
Björn Stenberg
f2815ff32f Removed a little too much.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15760 a1c6a512-1295-4272-9138-f99709370657
2007-11-22 21:57:17 +00:00
Björn Stenberg
b4e5123e5d New USB stack
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15758 a1c6a512-1295-4272-9138-f99709370657
2007-11-22 20:51:00 +00:00
Christian Gmeiner
21ac3110f1 * dont compile audio codec drivers for bootloader, as we dont need them -> saves time
* dont include uda1380 in bootloaders
* fix to get rid of a nasty humming sound during is not uda1380 specific but iriver
  specific and so put the fix into the bootloader. An other option was to 
  put audiohw_reset() into target tree... but i want to get rid of audiohw_reset


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15721 a1c6a512-1295-4272-9138-f99709370657
2007-11-20 12:09:59 +00:00
Catalin Patulea
eacf5a500e m:robe 500i: Add DSP code to SOURCES
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15714 a1c6a512-1295-4272-9138-f99709370657
2007-11-20 05:13:00 +00:00
Michael Sevakis
99617d71ba Make speex the new voice format for SWCODEC targets (non-Archos). Remove codec swapping and build speex voice decoding directly into the core binary.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15668 a1c6a512-1295-4272-9138-f99709370657
2007-11-18 17:12:19 +00:00
Karl Kurbjun
31ea780ee0 Seperate the Gigabeat F/X crt0.s, cleanup some #ifdefs in app.lds, add an extra reg to the debug menu.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15579 a1c6a512-1295-4272-9138-f99709370657
2007-11-11 17:58:13 +00:00
Barry Wardell
c495cdae59 FS#8046: H10 FM tuner support. Thanks to Przemyslaw Holubowski for doing the hard work in figuring out how to communicate with the tuner.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15578 a1c6a512-1295-4272-9138-f99709370657
2007-11-11 16:00:33 +00:00
Karl Kurbjun
d185f9eba8 Fix the Gigabeat red and move it's hw specific code into the target tree
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15562 a1c6a512-1295-4272-9138-f99709370657
2007-11-10 23:13:27 +00:00
Karl Kurbjun
d3c0a7f169 Change the way the UART recieves data and how buttons pressed are processed. Also move some of the debug menu into the target tree and allow rockblox to build when the screen is rotated.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15560 a1c6a512-1295-4272-9138-f99709370657
2007-11-10 22:12:54 +00:00
Barry Wardell
0d8111cb39 Split radio i2c drivers into target tree where they belong. No changes to binaries produced.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15558 a1c6a512-1295-4272-9138-f99709370657
2007-11-10 19:14:01 +00:00
Dave Chapman
a4d48d0c0d Button driver for Logik DAX, plus some changes to the debug info displayed in the bootloader build.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15396 a1c6a512-1295-4272-9138-f99709370657
2007-11-01 23:38:57 +00:00
Dave Chapman
28f6ae49ec Initial work on a port to the Logik DAX 1GB MP3/DAB player. The bootloader build compiles and runs (but only displays some debugging info), and the LCD and ADC drivers are working. Two different bootloader builds are possible: 1) The default build is just a test application for uploading to the device via tcctool; 2) Adding -DTCCBOOT to EXTRA_DEFINES in the build directory Makefile will compile the bootloader so that it can be appended to the end of the original firmware and installed on the device, dual-booting. This commit also includes some work by Hein-Pieter van Braam on a port to the iAudio 7, but that doesn't build yet. A large part of these ports will be generic to all TCC77x devices - see the TelechipsInfo wiki page for some other devices with this CPU. NOTE: Compiling these builds requires an arm-elf-gcc with armv5 support - the current version of rockboxdev.sh compiles such a gcc.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15339 a1c6a512-1295-4272-9138-f99709370657
2007-10-28 11:08:10 +00:00
Karl Kurbjun
5a9a2b7bc4 Unify the Gigabeat F/X and M:Robe MMU code while enabling it for the M:Robe
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15275 a1c6a512-1295-4272-9138-f99709370657
2007-10-23 03:29:15 +00:00
Jens Arnold
3c1b9d9d70 Assembler optimised lcd_yuv_blit() for iPod Video (Fs #7951 by Andree Buschmann, adapted and separated into an .S file by me).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15257 a1c6a512-1295-4272-9138-f99709370657
2007-10-22 00:37:50 +00:00
Karl Kurbjun
fdbc01c6e2 More M:Robe work including a fix to lcd-as-memframe for larger screens thanks to Michael Sevakis. Also fixes simulator builds.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15254 a1c6a512-1295-4272-9138-f99709370657
2007-10-21 23:12:17 +00:00
Jens Arnold
d1e2f5240c c200: First implemention of lcd_yuv_blit(). mpegplayer works now, but speed can be optimized more and dithering is not yet implemented.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15020 a1c6a512-1295-4272-9138-f99709370657
2007-10-07 17:54:49 +00:00
Michael Sevakis
6077e5b7c8 Unify PCM interface just above the hardware driver level for all targets including the sims. Perform lockout of audio callback when changing states. Weird new playback or recording trouble? Check before and after this revision first though things seem quite sound.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15006 a1c6a512-1295-4272-9138-f99709370657
2007-10-06 22:27:27 +00:00
Michael Sevakis
15b7321fe1 Split wm8731 and wm8721 drivers. wm8721 can be much simpler since it has no recording. Provide reg bit definitions for those. Add some temporary hacks pcm-pp to prevent crashing when playing after recording. Make playback start after recording on pp5020. Get wm8731 to monitor recording but plans are to do that digitally.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14948 a1c6a512-1295-4272-9138-f99709370657
2007-10-02 07:48:50 +00:00
Jonathan Gordon
03f45d3aff spi is shared between the rtc and tsc2100
adds the very begining of the rtc driver (only reads the time currently


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14935 a1c6a512-1295-4272-9138-f99709370657
2007-10-01 05:27:43 +00:00
Karl Kurbjun
c4d0a0ed8f Move some more files
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14920 a1c6a512-1295-4272-9138-f99709370657
2007-09-30 16:36:25 +00:00
Karl Kurbjun
a56b65342f Move some more files around and get the main build compiling
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14919 a1c6a512-1295-4272-9138-f99709370657
2007-09-30 16:29:21 +00:00
Jonathan Gordon
80f1688423 I got bullied in IRC by linuxstb and markun...
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14909 a1c6a512-1295-4272-9138-f99709370657
2007-09-30 08:57:49 +00:00
Michael Sevakis
3e7d4f0d14 Anti-red?
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14899 a1c6a512-1295-4272-9138-f99709370657
2007-09-29 06:56:21 +00:00
Michael Sevakis
da55251a35 Compile Portal Player bootloaders as single core. Cleanup the startup code for bootloaders. Remove cop stack entirely and keep IRAM use down on all relevant targets - just use the 128-byte idle stack. Use the inline asm version of current_core for pp5002 as well.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14898 a1c6a512-1295-4272-9138-f99709370657
2007-09-29 06:17:33 +00:00
Michael Sevakis
287d6223d3 Dithering option for mpegplayer on gigabeat-f/x and e200. Assembly IDCT for ARm just to make it all work more nicely. Move UI simulator YUV code to its core to adapt it.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14851 a1c6a512-1295-4272-9138-f99709370657
2007-09-25 02:59:42 +00:00
Jonathan Gordon
d331d00a2d start of the tsc2100 driver.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14816 a1c6a512-1295-4272-9138-f99709370657
2007-09-22 14:21:07 +00:00
Karl Kurbjun
4a42723c33 Seperate M:Robe crt0.S, fix the vector tables for the bootloader, and show touchscreen values on single line.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14814 a1c6a512-1295-4272-9138-f99709370657
2007-09-22 06:04:14 +00:00
Will Robertson
26a05afe10 A few minor cleanups for the Gigabeat S
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14812 a1c6a512-1295-4272-9138-f99709370657
2007-09-22 02:17:08 +00:00
Will Robertson
590501cfe4 Merge the Gigabeat S branch back into trunk. Fingers crossed nothing breaks.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14805 a1c6a512-1295-4272-9138-f99709370657
2007-09-21 15:51:53 +00:00
Catalin Patulea
c3126e0f3c m:robe 500i port: Add primitives for the SPI bus and start moving toward new-style register definitions.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14798 a1c6a512-1295-4272-9138-f99709370657
2007-09-21 09:06:02 +00:00
Jonathan Gordon
300f64c99a uart driver (which the buttons need) and button test code in the bootloader
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14768 a1c6a512-1295-4272-9138-f99709370657
2007-09-20 09:08:40 +00:00
Karl Kurbjun
7b97fe21c0 Beginning of an M:Robe 500i port. Currently only in the bootloader stage. Needs another piece of code to start the boot process - will be in the wiki.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14763 a1c6a512-1295-4272-9138-f99709370657
2007-09-20 04:46:41 +00:00
Christian Gmeiner
2077cebca0 * implement strstr
* clean up usb_arcotg_dcd_enable


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14740 a1c6a512-1295-4272-9138-f99709370657
2007-09-17 23:06:23 +00:00
Nils Wallménius
cab33b64a0 Accept patch in FS#7751 by Catalin Patulea, move ifp port specific pcm code to a new file
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14670 a1c6a512-1295-4272-9138-f99709370657
2007-09-11 15:34:54 +00:00
Mark Arigo
dbc6b4e39a Sansa c200 port. Rockbox works with sound. Several features are disabled including some lcd options, FM radio, recording, and all plugins. Loading the OF from the Rockbox bootloader does not work.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14625 a1c6a512-1295-4272-9138-f99709370657
2007-09-06 03:28:58 +00:00
Mark Arigo
4f3bcbbb11 Move files that will be common to the Sansa e200 and c200
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14624 a1c6a512-1295-4272-9138-f99709370657
2007-09-06 03:01:41 +00:00
Dave Chapman
9551ae92a5 Repair the USB detection on ipods and H10s which was broken by commit 14470. The intention is that when the experimental HAVE_USBSTACK is not defined, the old (pre-14470) code is run.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14481 a1c6a512-1295-4272-9138-f99709370657
2007-08-27 18:21:05 +00:00
Christian Gmeiner
8181a0c905 Usb Stack: only setup packet handling, and not enabled by default as there is a lot to do.
* settings code is not fully ready -> changing device driver has no effect
* clean ups
* check copyriths
* find a way to detect IN transfers
* support for full and highspeed
* ...




git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14470 a1c6a512-1295-4272-9138-f99709370657
2007-08-27 16:04:32 +00:00
Jens Arnold
0fac492c3d First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14375 a1c6a512-1295-4272-9138-f99709370657
2007-08-17 06:45:18 +00:00
Jens Arnold
cacd382963 The target power handling code isn't meant to be compiled for the sim.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14346 a1c6a512-1295-4272-9138-f99709370657
2007-08-14 22:23:15 +00:00
Jens Arnold
8a177345ce Moved archos power handling into target tree. * Tuner power handling cleaned up a bit.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14345 a1c6a512-1295-4272-9138-f99709370657
2007-08-14 22:06:23 +00:00
Nils Wallménius
f28da1a35a Enable a lot more features for simulators and add stubs where necessary, simulators should now work with identical lng and voice files as the respective target
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14299 a1c6a512-1295-4272-9138-f99709370657
2007-08-12 19:49:03 +00:00
Jens Arnold
cb896cdd04 Firewire detection with reboot into diskmode for all iPods that support it (all but Nano and Video). * Hack for compiling iPod G3 removed. * Code cleanup.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14131 a1c6a512-1295-4272-9138-f99709370657
2007-08-01 22:44:02 +00:00
Jens Arnold
a4a3cd9d52 First version of a 1st/2nd gen ADC driver. 1st gen is untested yet.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14082 a1c6a512-1295-4272-9138-f99709370657
2007-07-30 20:12:03 +00:00
Michael Sevakis
58fc279d26 Scroll on main and remote with a single thread. Change the way system messages are defined before running out is an issue (which requires a full update of rockbox on the player).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14035 a1c6a512-1295-4272-9138-f99709370657
2007-07-28 08:12:05 +00:00
Jens Arnold
021c0868dd iPod 2nd gen: * Fake battery voltage of 4.00V so rockbox doesn't shutdown (ADC is not yet implemented). * Fix button hold polarity for main rockbox. * Implement backlight inversion (the 1st/2nd gen backlight works in a way that makes the LCD look inverted when active). * Fix default contrast and clean up target tree.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14022 a1c6a512-1295-4272-9138-f99709370657
2007-07-27 12:05:54 +00:00
Jens Arnold
b7ea98f0ea Further G1/G2 work. Bootloader compiles now, but probably won't work.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14017 a1c6a512-1295-4272-9138-f99709370657
2007-07-26 23:02:37 +00:00
Kevin Ferrare
011a325e32 Makes apps and plugins interract with directories using a posix-like api instead of calling dircache / simulator functions (no additionnal layer added, only a cosmetic change)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13943 a1c6a512-1295-4272-9138-f99709370657
2007-07-20 17:06:55 +00:00
Michael Sevakis
680afafc23 Fix all the red this time?
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13884 a1c6a512-1295-4272-9138-f99709370657
2007-07-14 13:41:59 +00:00
Michael Sevakis
7d759f6b9c Do some planned radio interface cleanup since adding in the LV24020LP.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13880 a1c6a512-1295-4272-9138-f99709370657
2007-07-14 11:20:31 +00:00
Michael Sevakis
4ae87c8b8a Gigabeat: Add timer functionality. Rework tick timer setup to be exactly 100Hz. Metronome should work now but some pcm changes are needed to have faster tocks work correctly (in the works).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13806 a1c6a512-1295-4272-9138-f99709370657
2007-07-06 21:36:32 +00:00
Jens Arnold
473c1914aa Ooops.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13764 a1c6a512-1295-4272-9138-f99709370657
2007-07-02 05:33:06 +00:00
Michael Sevakis
1167e3c72f Accept FS#7134 - Sansa: external sd card support by Antonius Hellmann with some tweaks. All testers have given the green light. (Now for the RED ?? ;).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13741 a1c6a512-1295-4272-9138-f99709370657
2007-06-30 02:08:27 +00:00
Michael Sevakis
7fb0f71668 Gigabeat: Replace generic i2c driver with one that uses the CPU's builtin controller. Add some clocking registers to 'View I/O ports'.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13720 a1c6a512-1295-4272-9138-f99709370657
2007-06-26 02:11:30 +00:00
Nils Wallménius
07b7877809 Simple coldfire assembly strlen() function, 20-25% faster than the c
version. Move function out of iram as it turns out that makes it 
slightly faster.


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13713 a1c6a512-1295-4272-9138-f99709370657
2007-06-25 20:21:37 +00:00
Michael Sevakis
21a4a87ca2 Accept FS#7178 - Sansa e200 FM tuner support by Ivan Zupan. Do the needed integration work into recording and the AS3514 audio driver. Do a little AS3514 fiq_record tweak to have it all work nicely from the start.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13573 a1c6a512-1295-4272-9138-f99709370657
2007-06-06 19:23:48 +00:00
Michael Sevakis
bcb8a884ee e200: Add recording. Just from MIC right now and FM integration will happen soon. Most every bit of weirdness is nescessary and no problems seem to exist that the retailos doesn't exhibit too (namely noise when LCD is on when recording from MIC).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13557 a1c6a512-1295-4272-9138-f99709370657
2007-06-05 07:03:30 +00:00
Barry Wardell
54c73a24b6 Bring back rolo for mi4-based targets (H10 and Sansa).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13550 a1c6a512-1295-4272-9138-f99709370657
2007-06-04 13:48:21 +00:00
Christian Gmeiner
cdbf33adf7 * move audio settings into audio codec drivers
* add mas35xx driver for all mas35xx targets. Later 
  mas35xx code from sound.c will move to this new driver


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13464 a1c6a512-1295-4272-9138-f99709370657
2007-05-22 15:56:05 +00:00
Michael Sevakis
af272592f5 Change i2c config on e200. Seems to speed things up somewhat.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13403 a1c6a512-1295-4272-9138-f99709370657
2007-05-17 22:49:27 +00:00
Michael Sevakis
3c38fe4204 Gigabeat: Separate driver for audio codec. Tweak pcm driver to comply with intended interface.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13307 a1c6a512-1295-4272-9138-f99709370657
2007-05-02 22:33:24 +00:00
Daniel Stenberg
441d80318b removed unnecessary #if
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13276 a1c6a512-1295-4272-9138-f99709370657
2007-04-27 07:16:31 +00:00
Barry Wardell
f43e50dc53 Move PortalPlayer system.c code into the target tree.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13239 a1c6a512-1295-4272-9138-f99709370657
2007-04-22 12:03:17 +00:00
Marcoen Hirschberg
15dfe87f96 move audio drivers together into a subdir
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13209 a1c6a512-1295-4272-9138-f99709370657
2007-04-19 10:46:50 +00:00
Marcoen Hirschberg
f725ef1256 move to target tree
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13208 a1c6a512-1295-4272-9138-f99709370657
2007-04-19 10:20:54 +00:00
Marcoen Hirschberg
6ffbe3896b move the iriver ifp7xx and other pnx0101 related files together in the target tree
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13207 a1c6a512-1295-4272-9138-f99709370657
2007-04-19 10:14:55 +00:00
Marcoen Hirschberg
f44f961812 move the Gigabeat from gigabeat/meg-fx to s3c2440/gigabeat-fx to avoid problems with possible ports in the future: Gigabeat S/V (i.mx31 based) and Kenwood HD20GA7/HD20GA9 (s3c2440 based)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13200 a1c6a512-1295-4272-9138-f99709370657
2007-04-18 12:22:27 +00:00
Jens Arnold
7a5d4011f5 Moved SH1 ADC to target tree.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13174 a1c6a512-1295-4272-9138-f99709370657
2007-04-15 23:35:56 +00:00
Jens Arnold
8636e6949e Moved SH1 system code to target tree. * First shot at hwcompat cleanup.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13114 a1c6a512-1295-4272-9138-f99709370657
2007-04-11 23:51:00 +00:00
Jens Arnold
fad79dc636 Moved archos USB handling to target tree. Minor simplification for coldfire (only one usb-target.h).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13110 a1c6a512-1295-4272-9138-f99709370657
2007-04-11 20:44:32 +00:00
Dave Chapman
4303ab02a3 Optimized lcd_yuv_blit() (used by mpegplayer) for the Sansa E200. This is just a copy-and-paste of the Gigabeat version by Michael Sevakis with no attempt to adapt to the different CPU in the E200 - so there could be room for further improvement. Reported to increase the FPS for the 224x128 version of Elephants Dream from 21fps to 27fps.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13042 a1c6a512-1295-4272-9138-f99709370657
2007-04-06 09:34:13 +00:00
Michael Sevakis
6f56607212 Gigabeat: Add an assembly lcd_yuv_blit. Seems to be good for a modest speedup. ;)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12998 a1c6a512-1295-4272-9138-f99709370657
2007-04-02 09:27:12 +00:00
Jens Arnold
ad4e3d6657 First step of charcell LCD code rework: * Make it fully unicode aware so that adding non-ISO8859-1 scripts becomes possible (limited by the LCD capabilities of course). * Make the API more similar to the bitmap LCD code's API. * Moved hardware dependent parts to target tree. * Simplified code. * Jumpscroll temporarily non-functional.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12916 a1c6a512-1295-4272-9138-f99709370657
2007-03-26 07:52:13 +00:00
Tomasz Malesinski
cd630c9e0a PNX0101 changes:
Make PNX0101-specific system.c and crt0.S.
Add new register names from LPC2880 user manual.
Add support for timer.
Enable CPU frequency changing. 


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12904 a1c6a512-1295-4272-9138-f99709370657
2007-03-24 19:26:13 +00:00
Jonathan Gordon
a76947f2a2 Enable usb detection in the sansa bootloader (loads OF if detected)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12888 a1c6a512-1295-4272-9138-f99709370657
2007-03-22 12:45:19 +00:00
Michael Sevakis
6114f59006 Oops. Left an unneeded test line in SOURCES.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12844 a1c6a512-1295-4272-9138-f99709370657
2007-03-19 22:10:04 +00:00
Michael Sevakis
e1dd10ddfb SWCODEC: Get rid of extra swap buffer and get back 512K of RAM or 100K if the players RAM is <= 1MB. Make any needed changes to things to stabilize and facilitate this including removing flattening out initialization. Comment some things heavily. Fix a few logfs I didn't want to see the compiler complaining about.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12843 a1c6a512-1295-4272-9138-f99709370657
2007-03-19 22:04:17 +00:00
Daniel Ankers
dfad406aa1 Sound for Sansa E200 - based on work by myself, Rene Peinthor, Barry Wardell and Christian Gmeiner from the AS3514 datasheet.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12727 a1c6a512-1295-4272-9138-f99709370657
2007-03-11 17:38:08 +00:00
Michael Sevakis
89a38d4273 iAudio X5: Enable reading of DS2411 serial number. See it under System|Debug|View HW info.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12723 a1c6a512-1295-4272-9138-f99709370657
2007-03-11 13:59:31 +00:00
Michael Sevakis
98cd3e8868 Install the single stage synchronous audio initialization I cooked up awhile back.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12693 a1c6a512-1295-4272-9138-f99709370657
2007-03-09 12:30:14 +00:00
Jens Arnold
8876018d25 Bring up the M5 port to a working stage: Extended numerous explicit checks for IAUDIO_X5 to also check for IAUDIO_M5, moved code around the target tree, added preliminary background for the sim.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12610 a1c6a512-1295-4272-9138-f99709370657
2007-03-05 00:04:00 +00:00
Jens Arnold
b4994a08ca Added new iAudio M5 target, including some adjustments to make the bootloader compile (with a small change against the committed tools/tonfigure, and it won't actually work yet).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12588 a1c6a512-1295-4272-9138-f99709370657
2007-03-04 14:09:21 +00:00
Linus Nielsen Feltzing
8448d3b6be H300 bootloader: init the ISP1362 chip, and set the CPU to idle mode while charging, to save power
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12547 a1c6a512-1295-4272-9138-f99709370657
2007-03-02 13:04:57 +00:00
Robert Kukla
50b5ee4781 FS#6419 - driver for H1x0 series RTC Mod with runtime detection
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12520 a1c6a512-1295-4272-9138-f99709370657
2007-02-28 13:20:36 +00:00
Jens Arnold
d528e54b61 Move target specific parts of the H100 remote LCD driver to target tree.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12485 a1c6a512-1295-4272-9138-f99709370657
2007-02-25 22:09:14 +00:00
Jens Arnold
2906c36df3 Moved ipod LCD code to target tree.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12479 a1c6a512-1295-4272-9138-f99709370657
2007-02-25 13:11:02 +00:00
Jonathan Gordon
8ff3a653bd Explicilty set CONFIG_ defines to 0 which are not used.. because doing
#if defined(BLAA) && BLAA == something defeats the point of Wundef


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12378 a1c6a512-1295-4272-9138-f99709370657
2007-02-18 02:04:47 +00:00
Barry Wardell
3a6d4791d7 No functional changes, just reorganising code:
1) Move ARC OTG USB (used in PP502x) driver code into it's own file, drivers/arcotg_udc.c. Hopefully in  the future we will be able to adapt more of the Linux driver and add it to this file.
2) Rename mx31.h to arcotg_udc.h to reflect the file the code came from. It's also a more accurate name for the USB controller.
3) Get rid of one more inl()/outl() in usb-pp.c and use the relevant #define instead.
4) Add dr_controller_stop(). Not used yet.


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12340 a1c6a512-1295-4272-9138-f99709370657
2007-02-16 22:13:21 +00:00
Miika Pekkarinen
9b9539c8d3 Make database endianess independent.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12297 a1c6a512-1295-4272-9138-f99709370657
2007-02-13 21:51:18 +00:00
Barry Wardell
1a2dddc346 RTC support for Sansa.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12185 a1c6a512-1295-4272-9138-f99709370657
2007-02-03 13:10:17 +00:00
Daniel Ankers
e9a2caee2b Unify I2C driver for all PortalPlayer targets
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12126 a1c6a512-1295-4272-9138-f99709370657
2007-01-27 17:17:52 +00:00
Barry Wardell
adc349891e Clean up PP5002 I2C code (no functional changes):
Move into target tree.
Use #defines instead of inb/outb.

Also restore comments in PP5020 I2C code.


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12124 a1c6a512-1295-4272-9138-f99709370657
2007-01-27 15:20:30 +00:00
Barry Wardell
5e765b2ea2 Clean up PP5020 I2C code (no functional changes):
Move into target tree.
Use #defines instead of inb/outb.
Whitespace cleanup.


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12123 a1c6a512-1295-4272-9138-f99709370657
2007-01-27 14:22:24 +00:00
Jens Arnold
5d51784faa Assembler optimised ATA transfer loops for ARM targets. Only used for PP5020/5021/5022 targets atm. PP5002 seems to have problems with it not directly related to the asm code itself, and the gigabeat doesn't profit from it, probably because the CPU isn't the bottleneck even without optimisation.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12099 a1c6a512-1295-4272-9138-f99709370657
2007-01-24 00:12:08 +00:00
Daniel Ankers
1010b76c72 ARM optimised memcpy/memmove from glibc. This should give increased performance on all ARM targets, especially iPod 5G
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12000 a1c6a512-1295-4272-9138-f99709370657
2007-01-13 23:57:14 +00:00
Marcoen Hirschberg
295367686e merge a big part of the unofficial gigabeat cvs back. Includes working bootloader and rockbox with audio.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11850 a1c6a512-1295-4272-9138-f99709370657
2006-12-29 02:49:12 +00:00
Barry Wardell
4b54302b07 Combine USB code for all PortalPlayer targets since they most likely all use the same USB hardware. Add register defines for the USB hardware addresses, based off the Freescale i.MX31 datasheet. Use usb_init() from the iPod code, but modified to use the new register defines rather than oul/inl on the hardware addresses.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11823 a1c6a512-1295-4272-9138-f99709370657
2006-12-20 15:28:32 +00:00
Barry Wardell
2f16d4f1b3 Add working dual-boot bootloaders for H10 and Sansa, which allow booting the OF and Rockbox. Rolo also works.
Changes made:

Combine bootloader/h10.c and bootloader/e200.c into a common bootloader file (bootloader/main-pp.c) to be used by all mi4 based PortalPlayer targets. The file bootloader/main-pp.c is based off the old bootloader/h10.c with some minor changes to allow it to work on the Sansa too. This effectively adds a Sansa bootloader.

Define MODEL_NAME string in config-*.h for use in bootloader.

Split crt0-pp.S into separate files for bootloader and normal builds. Bootloader code is now in crt0-pp-bl.S while normal build code stays in crt0-pp.S.

Improvements to crt0-pp.S and crt0-pp-bl.S (mostly to make it more multiprocessor safe):
* Leave space in bootloader at 0xe0-0xeb since scramble writes over there when it creates the mi4 file (don't leave space for iPods since it's not needed and all code in crt0-pp-bl.S needs to fit before the boot_table at 0x100).
* Remove unused DEBUG and STUB code from crt0-pp.S.
* Make CPU wait for COP to be sleeping when we put the COP to sleep.
* Invalidate COP cache when COP wakes
* Flush CPU cache before waking COP
* Make sure only the CPU clears the BSS (not the COP)
* Make sure only the CPU sets up its own stack (not the COP)

Rolo works on H10, so enable it.

Make Sansa e200 use rockbox.e200 rather than PP5022.mi4 for 'Normal' builds. This makes updating rockbox simpler as we don't need to go through the firmware update procedure, but rather just put a new rockbox.e200 on the device. rockbox.e200 uses a simple 'add' checksum.


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11815 a1c6a512-1295-4272-9138-f99709370657
2006-12-19 11:33:53 +00:00
Barry Wardell
1cf6cdf6ac Fix more warnings. Don't compile PortalPlayer pcm code in bootloader builds.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11799 a1c6a512-1295-4272-9138-f99709370657
2006-12-18 02:58:23 +00:00
Barry Wardell
df0dc2262e FS#6096. Recording on PortalPlayer targets (H10, iPod Video, iPod 4g, iPod Color, iPod Nano).
* Fix failed compile of enc_config.c when HAVE_MPEG2_SAMPR is not defined.
* Fix bug in AIFF encoder header creation on little endian targets.
* Add recording screen keymaps for H10 and iPod.
* Move pcm_playback PP specific code to target tree.
* Add recording code to wmcodec drivers.
* Add pcm_record code.

Some problems still remain:
* Playback doesn't work after recording until Rockbox is restarted.
* Gain control not implemented.
* Only 16-bit/44KHz for now. The hardware should be capable of up to 24-bit/96KHz.
* Line-in recording not tested on H10.


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11794 a1c6a512-1295-4272-9138-f99709370657
2006-12-18 01:52:21 +00:00
Daniel Ankers
acbbe82a24 Move I2S initialisation out of the Wolfson codec driver
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11700 a1c6a512-1295-4272-9138-f99709370657
2006-12-09 19:18:18 +00:00
Jens Arnold
31ffd7b154 Completed target tree move of the ata driver code. Some code cleanup.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11655 a1c6a512-1295-4272-9138-f99709370657
2006-12-03 22:13:44 +00:00
Marcoen Hirschberg
a45e632495 move rtc functions to seperate files
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11614 a1c6a512-1295-4272-9138-f99709370657
2006-11-27 09:44:56 +00:00
Jens Arnold
0e6dd7efcd Moved archos button reading to target tree. * Cleanup of button.[ch]. * Deactivated serial remote code for recorder FM/V2 as there is no remote pin, saving ~500 bytes of code.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11612 a1c6a512-1295-4272-9138-f99709370657
2006-11-27 02:16:32 +00:00
Michael Sevakis
16cb491cdd iAudio/iRiver: Bootloader should not compile the audio-*.c files.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11581 a1c6a512-1295-4272-9138-f99709370657
2006-11-24 06:53:33 +00:00
Michael Sevakis
ab1861a3c2 iRiver/iAudio: Added audio_set_recording gain and sound_default to plugin API. Simplified plugin recording by target/-ing some audio functions. UDA1380 records with WSPLL as a result.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11577 a1c6a512-1295-4272-9138-f99709370657
2006-11-23 19:21:15 +00:00
Daniel Ankers
336cb6898e Add several dummy functions to allow Sansa to build correctly
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11568 a1c6a512-1295-4272-9138-f99709370657
2006-11-22 00:30:24 +00:00
Michael Sevakis
cc50c149e9 H100/General: HAL for S/PDIF and refinement/bufixes in optical output powering/source selection.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11523 a1c6a512-1295-4272-9138-f99709370657
2006-11-13 23:21:54 +00:00
Jens Arnold
6bdf3ee6f2 Split 1 bit LCD code and move appropriate parts to target tree. Only archos code is tested.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11517 a1c6a512-1295-4272-9138-f99709370657
2006-11-12 13:22:59 +00:00
Jens Arnold
616945590d Removed the Gmini 120 and Gmini SP code. These ports are dead, unfortunately.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11505 a1c6a512-1295-4272-9138-f99709370657
2006-11-10 20:36:39 +00:00
Michael Sevakis
f64f589d2e H100/120: Split lcd driver into pixel format and device specific parts. Adjustment of contrast range to just a little less than white to a little more than black. Really only had to reset minimum.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11487 a1c6a512-1295-4272-9138-f99709370657
2006-11-10 00:02:28 +00:00
Tomasz Malesinski
6e992abf36 Target tree support for Iriver iFP.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11485 a1c6a512-1295-4272-9138-f99709370657
2006-11-09 22:58:35 +00:00
Jens Arnold
ad70a9b2e6 Moved archos LCD aseembler code to target tree.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11478 a1c6a512-1295-4272-9138-f99709370657
2006-11-09 07:31:31 +00:00
Michael Sevakis
e89a3940f9 More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
Marcoen Hirschberg
f9c8a891af put back the PP5002 specific ATA code that got lost during the ipod target tree move
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11467 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 12:34:21 +00:00
Jonathan Gordon
59da10a940 grr.. got lost in firmware/SOURCES
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11463 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 03:06:37 +00:00
Jonathan Gordon
d9f7ac24f4 fix booboo in ata.c (SYS_POWEROFF falling into SYS_USB_CONNECTED)
enable ata_idle callbacks in ata_mmc.c (calls the callbacks after 10s of
real inactivity)
fix builds


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11462 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 02:23:01 +00:00
Michael Sevakis
0f5cb94aa4 Big Patch adds primarily: Samplerate and format selection to recording for SWCODEC. Supprort for samplerates changing in playback (just goes with the recording part inseparably). Samplerates to all encoders. Encoders can be configured individually on a menu specific to the encoder in the recording menu. File creation is delayed until flush time to reduce spinups when splitting. Misc: statusbar icons for numbers are individual digits to display any number. Audio buffer was rearranged to maximize memory available to recording and properly reinitialized when trashed. ColdFire PCM stuff moved to target tree to avoid a complicated mess when adding samplerate switching. Some needed API changes and to neaten up growing gap between hardware and software codecs.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11452 a1c6a512-1295-4272-9138-f99709370657
2006-11-06 18:07:30 +00:00
Jonathan Gordon
0b22795e26 adds ata_idle_notify system which allows callbacks in apps/ to be called
when the hard disk is idle but spinning, and just before shutting down.
on SWCODEC targets with > 8MB RAM the playback engine will try to
refill the buffer if it is less than 75% full while the disk is spinning
(temporarily disabled on the nano)


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11451 a1c6a512-1295-4272-9138-f99709370657
2006-11-06 14:24:18 +00:00
Michael Sevakis
f29cae0d26 Moved coldfire code in system.c and system.h into target tree.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11399 a1c6a512-1295-4272-9138-f99709370657
2006-10-30 14:17:14 +00:00
Jonathan Gordon
139f9f28e9 move the iriver h1x0/h3x0 targets to the target tree
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11392 a1c6a512-1295-4272-9138-f99709370657
2006-10-30 08:56:06 +00:00
Jonathan Gordon
a737de778a oops, two files didnt get commited
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11381 a1c6a512-1295-4272-9138-f99709370657
2006-10-29 10:32:50 +00:00