Commit graph

645 commits

Author SHA1 Message Date
Michael Sevakis
d0178ba01c Display messages only when entering USB mode in Portal Player bootloader to keep timed-out charger-only connects going into verbose mode.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29060 a1c6a512-1295-4272-9138-f99709370657
2011-01-16 00:21:54 +00:00
Michael Sevakis
7b7cfc31c5 Fix r29054 red...yeah?
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29055 a1c6a512-1295-4272-9138-f99709370657
2011-01-15 09:01:55 +00:00
Michael Sevakis
71651cacb6 Fix r29053 red and a leftover use of 'usb' variable as a bool rather than int in main-pp.c.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29054 a1c6a512-1295-4272-9138-f99709370657
2011-01-15 08:52:59 +00:00
Michael Sevakis
3a1127785b Bootloader USB mode for PP502x. Enable only on GoGear SA9200 for the time being. Add HAVE_BOOTLOADER_USB_MODE to config if BOOTLOADER is defined to enable it. Clean up some kernel stuff a little to support it. Mess up a bunch of other stuff (hopefully not too badly).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29053 a1c6a512-1295-4272-9138-f99709370657
2011-01-15 08:19:30 +00:00
Michael Sevakis
0afad89f53 SA9200 boot: Add OF.ebn to the list of OF filenames to check.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29014 a1c6a512-1295-4272-9138-f99709370657
2011-01-09 19:31:41 +00:00
Michael Sevakis
89a7a8138e Gigabeat S: Make it a removable mass-storage device. Windows will assign a drive to only the main data partition by default. To access the bootloader partition instead, press 'Vol -' while it connects (in bootloader and firmware). Hopefully doesn't break anything for anyone.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28972 a1c6a512-1295-4272-9138-f99709370657
2011-01-05 19:35:51 +00:00
Marcin Bukat
67feb81084 MPIO bootloader - turn off backlight when hold is on. Usefull feature when charging during night.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28958 a1c6a512-1295-4272-9138-f99709370657
2011-01-03 13:11:48 +00:00
Marcin Bukat
0358e7b864 MPIO HD200, HD300: Make USB bridge handling more correct (this doesn't solve problems with USB inside rockbox on HD300 unfortunately).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28780 a1c6a512-1295-4272-9138-f99709370657
2010-12-09 11:31:08 +00:00
Marcin Bukat
a73102f2c2 HD300: Fix bootloader hang when RTC alarm fires. Make entering bootmenu more reliable. Add some comments.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28739 a1c6a512-1295-4272-9138-f99709370657
2010-12-06 10:24:29 +00:00
Marcin Bukat
15a0a3c263 Rename bootloader file for MPIO players as it supports both HD200 and HD300.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28700 a1c6a512-1295-4272-9138-f99709370657
2010-11-28 23:10:09 +00:00
Marcin Bukat
9a24892e2e MPIO HD300 - initial commit
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28680 a1c6a512-1295-4272-9138-f99709370657
2010-11-26 23:28:08 +00:00
Marcin Bukat
650a2941fd MPIO HD200: fix red (I missed bootloader and simulator when renaming buttons)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28444 a1c6a512-1295-4272-9138-f99709370657
2010-11-02 10:51:04 +00:00
Marcin Bukat
082c7d3c6b Set svn properties
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28326 a1c6a512-1295-4272-9138-f99709370657
2010-10-22 12:28:43 +00:00
Marcin Bukat
38edf679f2 MPIO HD200 - squash long standing bug in bootloader which prevented booting OF if doing coldstart on battery only.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28324 a1c6a512-1295-4272-9138-f99709370657
2010-10-22 12:11:58 +00:00
Michael Sparmann
c599da333e Commit FS#11663 by me - Patch: iPod Nano 2G Bootloader: Boot OF if MENU button is held
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28237 a1c6a512-1295-4272-9138-f99709370657
2010-10-10 20:52:46 +00:00
Thomas Martitz
0e2286f226 Introduce NORETURN_ATTR wrapper for __attribute__((noreturn)), using this and a bit further cleanup in main gets rid of a warning when compiling for android.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27788 a1c6a512-1295-4272-9138-f99709370657
2010-08-12 13:38:25 +00:00
Thomas Martitz
240923a801 Rockbox as an application: Commit current Android port progress.
General state is: Rockbox is usable (plays music, saves configuration, touchscreen works too).
Problems:
 - Playing music in the background (i.e. when switching to another app) doesn't work reliably, but I'm working on that now.
 - no cabbiev2 (only some preliminary files for it), no other default theme.
 - screen flickers sometimes if the updates are too frequent
 - no multi screen apk/package
 - strange behavior when a phone call comes in

The java files (and the eclipse project) resides in android/, which is also supposed to be the build folder.
I've put a small README in there for instructions. There are some steps needed after the make part, which are described there,
and which eclipse mostly handles. But there ought to be some script/makefile rules which do that instead in the future.

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27668 a1c6a512-1295-4272-9138-f99709370657
2010-08-02 20:34:47 +00:00
Marcin Bukat
a6478fda4f fix yellow
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27356 a1c6a512-1295-4272-9138-f99709370657
2010-07-09 09:18:40 +00:00
Marcin Bukat
78d54fae75 HD200 - Add delay when leaving bootloader USB mode. Add more comments in bootloader.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27355 a1c6a512-1295-4272-9138-f99709370657
2010-07-09 09:12:51 +00:00
Marcin Bukat
57484bdf04 HD200 - add support for remote in bootloader
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27316 a1c6a512-1295-4272-9138-f99709370657
2010-07-06 17:30:10 +00:00
Frank Gevaerts
b8286d45be Move -Wl,-z,defs to GLOBAL_LDOPTS (instead of GCCOPTS), to avoid noise in older gcc output when not linking
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27260 a1c6a512-1295-4272-9138-f99709370657
2010-07-03 20:58:22 +00:00
Rafaël Carré
64d3a22ec0 sansa AMS bootloader: build if USE_ROCKBOX_USB isn't defined
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27076 a1c6a512-1295-4272-9138-f99709370657
2010-06-23 05:16:24 +00:00
Rafaël Carré
1ec821244a Sansa AMS bootloader: enter USB mode only when needed
- If an error happens when reading partitions / rockbox.sansa
- If the select button was pressed

add an argument to error() to not power off, when we're going to enter
USB mode to try to fix the problem, but display the error message anyway
for debugging purpose

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27075 a1c6a512-1295-4272-9138-f99709370657
2010-06-23 05:08:36 +00:00
Rafaël Carré
fd715fa95c as3525*: enable MMU in bootloader
Reserve 1MB of DRAM for loading rockbox and use the rest as BSS
Write sdram setup in assembler and move it to a separate file, together
with MMU init code

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26926 a1c6a512-1295-4272-9138-f99709370657
2010-06-18 17:33:51 +00:00
Rafaël Carré
f9b0f81d63 Sansa AMS: fix bootloader USB mode
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26914 a1c6a512-1295-4272-9138-f99709370657
2010-06-18 13:30:25 +00:00
Rafaël Carré
b812465bff as3525: bootloader USB mode
not working yet : an empty drive is detected
won't link on fuzev1: drivers allocated in usb_storage.c are too large

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26905 a1c6a512-1295-4272-9138-f99709370657
2010-06-18 01:47:39 +00:00
Marcin Bukat
cd87971bad HD200 - use ide_power_enable() in bootloader
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26844 a1c6a512-1295-4272-9138-f99709370657
2010-06-14 10:42:45 +00:00
Bertrik Sikken
a5248a2995 Update Samsung YP-S3 bootloader demo
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26417 a1c6a512-1295-4272-9138-f99709370657
2010-05-30 21:43:14 +00:00
Rafaël Carré
5d236b2bfd Generate C file / header for svn version string
It's now easier to force rebuild of files depending on the svn revision

version.c/version.h are generated once with new tools/genversion.sh
Changes in the VCS are still not auto detected, so you'll have to remove
builddir/version.* if you want to change the string in your binaries

APPSVERSION is now called RBVERSION and is defined in the generated
header instead of being defined by the Makefiles
appsversion is now called rbversion (the plugin api number didn't change
since old modules are still binary compatible)

Change some bootloaders to use knwon-at-buildtime RBVERSION instead of
"%s" + rbversion

You'll need to run make clean to regenerate dependencies after the
removal of apps/version.h

To build binaries with a different version string, hand-edit
tools/version.sh or tools/genversion.sh (which calls the former)

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26320 a1c6a512-1295-4272-9138-f99709370657
2010-05-27 09:41:46 +00:00
Frank Gevaerts
ab4a162763 Fix gigabeat S includes so it builds again
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25855 a1c6a512-1295-4272-9138-f99709370657
2010-05-06 22:13:54 +00:00
Thomas Martitz
77dfff5a55 Fix some more snprintf related warnings.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25853 a1c6a512-1295-4272-9138-f99709370657
2010-05-06 21:37:03 +00:00
Thomas Martitz
0a1d7c28b7 Make open() posix compliant api-wise. A few calls (those with O_CREAT) need the additional optional mode parameter so add it. Impact for the core is almost zero, as open() is a wrapper macro for the real open function which doesn't take the variable parameter.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25844 a1c6a512-1295-4272-9138-f99709370657
2010-05-06 17:35:13 +00:00
Thomas Martitz
c61e89c0ed Make creat() posix compliant API-wise. Shouldn't affect the core as it's wrapped via a static inline.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25843 a1c6a512-1295-4272-9138-f99709370657
2010-05-06 17:35:04 +00:00
Michael Sevakis
0defb8483c Gigabeat S bootloader: Fix archaic call placement in dptc_stop which hangs the bootloader before jumping to FW. Let the backlight LED ramp up after unplugging USB which just looks better.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25840 a1c6a512-1295-4272-9138-f99709370657
2010-05-06 04:45:05 +00:00
Marcin Bukat
69fa42d905 HD200 - rework bootloader logic
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25806 a1c6a512-1295-4272-9138-f99709370657
2010-05-04 11:16:17 +00:00
Marcin Bukat
28d54c6016 Add MPIO HD200 port - new files
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25725 a1c6a512-1295-4272-9138-f99709370657
2010-04-26 21:40:16 +00:00
Marcin Bukat
b09d3aec39 Add MPIO HD200 port - changed files
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25724 a1c6a512-1295-4272-9138-f99709370657
2010-04-26 21:40:00 +00:00
Torne Wuff
0d24df8b95 FS#11199: ipod bootloader: reboot to disk mode on cable insert, following a fatal error
If the ipod bootloader dies with a fatal error it prompts you to press buttons to reset and enter disk mode. With this change it now also polls for USB/firewire insertion and if the cable is detected, it reboots to disk mode directly for you, avoiding user problems with rebooting correctly by hand.


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25643 a1c6a512-1295-4272-9138-f99709370657
2010-04-13 22:17:42 +00:00
Michael Sevakis
011b0fa66a Gigabeat S: Fix bootloader red from r25547 commit.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25548 a1c6a512-1295-4272-9138-f99709370657
2010-04-09 01:28:19 +00:00
Frank Gevaerts
2dbafc1086 Fix some forgotten storage_(read|write)_sectors() calls
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25461 a1c6a512-1295-4272-9138-f99709370657
2010-04-03 22:18:16 +00:00
Rafaël Carré
dee432fd95 as3525v2: silence bootloader
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25369 a1c6a512-1295-4272-9138-f99709370657
2010-03-28 04:10:40 +00:00
Szymon Dziok
492fafe879 Packard Bell Vibe 500: remove the old bootloader code (actually a lack of code) and make the main-pp.c acting like a true bootloader for the DAP. It's the first step to integrate the DAP with the RBUtil.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25311 a1c6a512-1295-4272-9138-f99709370657
2010-03-23 21:28:25 +00:00
Rafaël Carré
97c1497b8d Clip+ : make the bootloader not verbose by default
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25201 a1c6a512-1295-4272-9138-f99709370657
2010-03-15 11:47:50 +00:00
Michael Sparmann
e5c815272d Add more information to the battery debug screen for Nano2G
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24723 a1c6a512-1295-4272-9138-f99709370657
2010-02-17 15:57:53 +00:00
Andree Buschmann
dfe46436b1 Remove tabs
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24547 a1c6a512-1295-4272-9138-f99709370657
2010-02-07 17:50:24 +00:00
Rafaël Carré
12af2926e5 Make Clip+ bootloader build
Now making the Fuzev2 bootloader build should be pretty easy

TODO:
    - write button driver (FlynDice found all buttons already)
    - find button light
    - decide if lcd-ssd1303.c must be modified for Clip+ using SSP or forked
    - check if backlight code works (I copied Clipv2 code)

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24520 a1c6a512-1295-4272-9138-f99709370657
2010-02-05 12:40:25 +00:00
Frank Gevaerts
553626a958 Add initial Packard Bell Vibe 500 port, by Szymon Dziok
Author: Szymon Dziok 
Flyspray: FS#10912


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24276 a1c6a512-1295-4272-9138-f99709370657
2010-01-18 19:05:20 +00:00
Bertrik Sikken
6fef14bd16 Set svn:keywords property on .c and .h files that didn't already have it. Correct svn:executable property on some files.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24165 a1c6a512-1295-4272-9138-f99709370657
2010-01-03 14:28:09 +00:00
Andree Buschmann
5cebdcd06b More tabs removed
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24157 a1c6a512-1295-4272-9138-f99709370657
2010-01-03 11:12:31 +00:00
Rafaël Carré
2392bb4199 FS#10047 : Clipv2
Reuse some code from Clip (LCD) and a lot of code from AS3525
Add a new CPU type : AS3525v2, identical to AS3525 except it's an ARMv5 (arm926-ejs)
SD code still not working
For an unknown reason LCD doesn't work anymore (to be investigated)

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24131 a1c6a512-1295-4272-9138-f99709370657
2009-12-31 19:15:20 +00:00
Mark Arigo
6908cc5235 Merry Christmas Gogear HDD6330 owners! This is the start of the HDD6330 port. At the moment, it's essentially a copy of the HDD1630 port with a minimal LCD driver. The touchpad doesn't work as expected, but you can still kind of navigate and listen to music/radio.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24112 a1c6a512-1295-4272-9138-f99709370657
2009-12-25 04:05:01 +00:00
Robert Kukla
2d722a17ec make tpj1022 bootloader compile again
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23892 a1c6a512-1295-4272-9138-f99709370657
2009-12-07 16:12:49 +00:00
Dominik Wenger
d25baecc0b make mini2440 bootloader compile again, and remove a few warnings from sd driver.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23440 a1c6a512-1295-4272-9138-f99709370657
2009-10-31 16:48:08 +00:00
Dominik Wenger
90b576f55e Many more drivers for mini2440. Now the main binary compiles and runs.
Flyspray: FS#10725
Author: Bob Cousins

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23362 a1c6a512-1295-4272-9138-f99709370657
2009-10-26 18:16:58 +00:00
Bertrik Sikken
52ca187f68 Meizu M6 SP: update lcd driver, it is now possible to display a rockbox logo (with some limitations, see comments in lcd-m6sp.c)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23345 a1c6a512-1295-4272-9138-f99709370657
2009-10-25 11:31:13 +00:00
Dominik Wenger
5b4938a8ca Working Bootloader for mini2440.
Flyspray: FS#10701
Author: Bob Cousins

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23316 a1c6a512-1295-4272-9138-f99709370657
2009-10-22 17:45:02 +00:00
Dominik Wenger
41c497025f Initial mini2440 port.
Flyspray: FS#10627
Author: Bob Cousins

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23265 a1c6a512-1295-4272-9138-f99709370657
2009-10-19 18:14:27 +00:00
Dave Chapman
a70c7bf862 Nano2G bootloader - fix dual-booting the Apple firmware.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23139 a1c6a512-1295-4272-9138-f99709370657
2009-10-12 19:46:45 +00:00
Dave Chapman
f2bf463d90 Nano2G: Initial (non-working) attempt to load an encrypted copy of the original firmware from the "osbk" image in the firmware partition. Code based on iloader.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23123 a1c6a512-1295-4272-9138-f99709370657
2009-10-12 00:57:07 +00:00
Bertrik Sikken
b68d7f54ae Samsung YP-S3: make bootloader compile again
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23107 a1c6a512-1295-4272-9138-f99709370657
2009-10-11 13:15:23 +00:00
Dave Chapman
b04a7a86e1 Make the Nano2G bootloader actually function as a bootloader. The resulting bootloader-ipodnano2g.ipod file needs to be encrypted on a target using the crypt_firmware plugin to create bootloader-ipodnano2g.ipodx, which can then be written to the firmware partition using the ipodpatcher patch at FS#10609. Dual-booting doesn't work yet - only Rockbox can be run.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@23084 a1c6a512-1295-4272-9138-f99709370657
2009-10-11 01:37:12 +00:00
Vitja Makarov
0152fe604b bootloader/telechips: disable irqs before jumping to rockbox
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@22762 a1c6a512-1295-4272-9138-f99709370657
2009-09-21 08:38:52 +00:00
Thomas Martitz
164d28af62 Make Samsung YH* bootloaders non-verbose (i.e. show the bootlogo) (backported from the ams/pp bootloader branch)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@22747 a1c6a512-1295-4272-9138-f99709370657
2009-09-20 12:25:03 +00:00
Thomas Martitz
e2ccabf89d Samsung YH925: Reset the LCD orientation to what the OF expects before branching to it in dualbooting
Author: Mark Arigo

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@22659 a1c6a512-1295-4272-9138-f99709370657
2009-09-08 13:57:13 +00:00
Maurus Cuelenaere
bfd42d6b59 Onda VX747/VX777 bootloader: power off after holding the poweroff button for 2 seconds (BUTTON_REPEAT doesn't seem to work in bootloader)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@22589 a1c6a512-1295-4272-9138-f99709370657
2009-09-01 07:57:56 +00:00
Maurus Cuelenaere
f7b4ed369e Onda VX747/VX777 bootloader: make boot menu more robust + add reset Rockbox configuration option
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@22459 a1c6a512-1295-4272-9138-f99709370657
2009-08-21 22:37:27 +00:00
Nils Wallménius
304c622899 fix more red
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@22433 a1c6a512-1295-4272-9138-f99709370657
2009-08-19 22:36:39 +00:00
Nils Wallménius
47608e06b3 fix red
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@22432 a1c6a512-1295-4272-9138-f99709370657
2009-08-19 22:15:45 +00:00
Maurus Cuelenaere
caf2011311 Onda's: add touchscreen boot menu for targets without/not much physical buttons (VX777)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@22416 a1c6a512-1295-4272-9138-f99709370657
2009-08-19 00:26:06 +00:00
Bertrik Sikken
5aeaa84cab Samsung YP-S3: add beginning of a low-level NAND driver and update bootloader demo program to display the NAND ids.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@22221 a1c6a512-1295-4272-9138-f99709370657
2009-08-09 16:12:36 +00:00
Bertrik Sikken
4632fc0682 Samsung YP-S3: allow player to stay powered up without the USB cable plugged and implement power_off
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@22175 a1c6a512-1295-4272-9138-f99709370657
2009-08-05 16:16:17 +00:00
Bertrik Sikken
0dc5cc8002 Samsung YP-S3: update bootloader demo app with test code for the wmcodec (volume control of fm radio)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@22138 a1c6a512-1295-4272-9138-f99709370657
2009-08-03 14:24:28 +00:00
Bertrik Sikken
ee0ab03286 Samsung YP-S3: update backlight brightness curve again (can't go all the way down to 1/256 brightness) and update yp-s3 bootloader demo.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@22117 a1c6a512-1295-4272-9138-f99709370657
2009-08-02 16:43:58 +00:00
Bertrik Sikken
2fb73842a9 Start of a Rockbox port to the Samsung YP-S3.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@22085 a1c6a512-1295-4272-9138-f99709370657
2009-07-29 20:42:02 +00:00
Maurus Cuelenaere
4ce26ff328 Onda VX747: don't fully init the LCD when not doing an USB_BOOT compile (fixes flashes when booting up)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@22051 a1c6a512-1295-4272-9138-f99709370657
2009-07-26 13:27:12 +00:00
Dave Chapman
386503502b Various Nano2g changes - enable the rest of crt0.S (including clock setup) and make the nano2g bootloader do something useful (displaying gpio ports). Also add checks for the fifo-full condition in the LCD driver - required after enabling all the crt0.S inits
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21948 a1c6a512-1295-4272-9138-f99709370657
2009-07-18 11:31:19 +00:00
Maurus Cuelenaere
cf9935d636 Onda VX747: add dual-boot capability + make it possible to permanently 'stick' Rockbox to your DAP
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21919 a1c6a512-1295-4272-9138-f99709370657
2009-07-17 14:30:42 +00:00
Dave Chapman
0270e4c591 Get the Nano2G bootloader running - it now runs and displays a logo on one type of Nano2G LCD.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21900 a1c6a512-1295-4272-9138-f99709370657
2009-07-16 00:57:02 +00:00
Robert Keevil
eea149bd13 FS#10436 - add the Sansa View to the build system. The bootloader builds but doesn't do anything useful yet.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21848 a1c6a512-1295-4272-9138-f99709370657
2009-07-13 21:09:39 +00:00
Dave Chapman
afe43d3fcb Basic changes to add nano 2g to the build system, based on the Meizu M3 port. The bootloader builds, but does nothing due to lack of any drivers.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21828 a1c6a512-1295-4272-9138-f99709370657
2009-07-12 22:16:51 +00:00
Bertrik Sikken
80fbb4ec99 Update initialisation and display of debug info in meizu M3 bootloader
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21673 a1c6a512-1295-4272-9138-f99709370657
2009-07-05 19:14:46 +00:00
Maurus Cuelenaere
c468273e6d Onda VX747: clean up bootloader a bit and make sure storage doesn't get init'd twice
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21593 a1c6a512-1295-4272-9138-f99709370657
2009-07-01 14:39:39 +00:00
Maurus Cuelenaere
278b8f84d6 Onda VX747 bootloader: don't init storage twice
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21591 a1c6a512-1295-4272-9138-f99709370657
2009-07-01 13:53:19 +00:00
Rob Purchase
f62388f82c TCC78x: Enable interrupts/threading in the bootloader (required now that the storage driver yields).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21486 a1c6a512-1295-4272-9138-f99709370657
2009-06-24 07:37:11 +00:00
Bertrik Sikken
743dcf7f69 Implement PWM backlight driver for the Meizus. Update Meizu M3 bootloader to control brightness with the touch strip.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21478 a1c6a512-1295-4272-9138-f99709370657
2009-06-23 18:11:03 +00:00
Maurus Cuelenaere
582942016b * Commit a modified FS#10354 (thanks to Davide Quarta) - add support the VX747+ in scramble and configure
* Add support for the VX777
* Remove the touchscreen mode switching combo from the button driver



git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21379 a1c6a512-1295-4272-9138-f99709370657
2009-06-20 10:54:13 +00:00
Rafaël Carré
3520d8e90e Sansa c200v2 : lcd & backlight support, using the c200v1 lcd driver
The LCD driver is unified and lcd_send_command now takes 2 arguments : the command and its argument.
    If there is no argument, it's set to 0 and a NOP command is issued
    If there is more than one argument (set X/Y address), the 2nd argument is sent as a 2nd command, and a NOP command is issued after it.
    Benefit : c200v2 transfers the command and the argument in one 16 bits transfer
    Performance should not be affected since commands without argument are only used in lcd_init() and lcd_enable()

lcd_send_data() now transfers whole lines (or columns) instead of single pixels
yuv is disabled for c200v2 for now

Some buttons can be read, including left button (bit 6 of DBOP_DIN), but for some reason they have no effect in rockbox: to be investigated

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21321 a1c6a512-1295-4272-9138-f99709370657
2009-06-17 19:55:27 +00:00
Rafaël Carré
f504153857 FS#10048 : enable MMU and data cache on Sansa AMS to give a major speed up
- cache IRAM and DRAM
- map IRAM just next to DRAM to remove the need for -mlong-calls and reduce binsize
- tweak delays in Fuze button code
- tweak delays in Clip button code (down button sometimes doesn't respond anyway : an alternate driver is being worked on)

Before reporting any problem, please check your filesystem or format your player from the OF

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21228 a1c6a512-1295-4272-9138-f99709370657
2009-06-08 23:05:33 +00:00
Mark Arigo
758bb3bc62 3 new ports: Samsung YH-820, YH-920, and YH-925. Mostly functional. Audio working on 820 & 925 (untested on the 920). No battery readings. No recording. No plugins. Keymap needs work.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21083 a1c6a512-1295-4272-9138-f99709370657
2009-05-25 21:10:45 +00:00
Thomas Martitz
4633446517 Sansa AMS: Centralise mapping of RAM and IRAM in as3525.h via #defines. This will hopefully make ongoing mmu work easier as less places need to be changed.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21000 a1c6a512-1295-4272-9138-f99709370657
2009-05-20 21:09:53 +00:00
Dave Chapman
49fccaf2d9 FS#9730 by Torne Wuff - support installing Rockbox in the firmware partition in place of the main Apple firmware. This image is only loaded if no rockbox.ipod is found so does not affect current behaviour. The advantage is a small increase in boottime. This patch also adds documentation to bootloader/ipod.c in the form of a comment describing the booting behaviour.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20921 a1c6a512-1295-4272-9138-f99709370657
2009-05-12 20:41:44 +00:00
Bertrik Sikken
dccdce6c3c Remove unnecessary #include "adc.h"
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20791 a1c6a512-1295-4272-9138-f99709370657
2009-04-25 22:24:59 +00:00
Maurus Cuelenaere
3369a74cf7 Fix VX767 bootloader warning
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20771 a1c6a512-1295-4272-9138-f99709370657
2009-04-21 15:47:39 +00:00
Karl Kurbjun
75be9c3a5a Gigabeat FX: Look for button A (rather than any button) in bootloader for verbose mode - needed for flashed bootloader
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20768 a1c6a512-1295-4272-9138-f99709370657
2009-04-21 04:36:46 +00:00
Maurus Cuelenaere
be8a27ad81 Onda VX747: fix touchscreen issues when switching from bootloader to 'normal' Rockbox
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20754 a1c6a512-1295-4272-9138-f99709370657
2009-04-20 18:28:51 +00:00
Mustapha Senhaji
aeddacbd14 FS#10066 by Michael Chicoine: Sansa AMS bootloader "Hold" switch detection.
(Not for the Fuze nor the Clip, because it seems pointless for them)
 


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20681 a1c6a512-1295-4272-9138-f99709370657
2009-04-10 22:18:02 +00:00
Karl Kurbjun
b2c4bd3a53 M:Robe 500: Remove some dead test code in bootloader, reorganize the bootloader link script, and remove an unnecessary lcd disable/enable in initialization.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20674 a1c6a512-1295-4272-9138-f99709370657
2009-04-10 04:48:44 +00:00
Dominik Wenger
f5c5983c73 commit FS#10092 (cleanup AMS system init) by Rafaël Carré.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20640 a1c6a512-1295-4272-9138-f99709370657
2009-04-07 16:14:01 +00:00
Daniel Stenberg
8983fcb5f2 Initial commit for the "Lyre prototype 1" port by Jorge Pinto from FS#10045.
Bootloader builds, normal does not.


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20574 a1c6a512-1295-4272-9138-f99709370657
2009-03-30 12:20:47 +00:00
Thomas Martitz
b5e6eec5a1 Fix ZVM 30GB bootloader.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20347 a1c6a512-1295-4272-9138-f99709370657
2009-03-17 21:23:02 +00:00
Nils Wallménius
6ce98bda11 FS#10018 general pp bootloader: start the OF if loading rockbox fails. Resolves a bug where the c200 bootloader would loop flashing the logo if loading rockbox failed and drop support for loading old .e200 and .h10 rockbox main binaries for the e200 resp h10, affects e200, c200, h10 (both kinds) and mrobe 100.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20342 a1c6a512-1295-4272-9138-f99709370657
2009-03-17 20:05:03 +00:00
Karl Kurbjun
9e1d00c9fb Get the M:Robe 500 main build booting again, fix a bug and commit the rest of Cat's work to get sound working. The code is messy right now, but it plays a file (test.raw) in a normal build when you go into the debug ports screen. Take 1.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20118 a1c6a512-1295-4272-9138-f99709370657
2009-02-26 21:24:40 +00:00
Maurus Cuelenaere
935fad7fd1 Small fix for touchscreen-capable DAP's in display_logf()
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20114 a1c6a512-1295-4272-9138-f99709370657
2009-02-26 21:07:27 +00:00
Frank Gevaerts
cf2632229b fix the obligatory yellow
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20107 a1c6a512-1295-4272-9138-f99709370657
2009-02-25 22:59:23 +00:00
Frank Gevaerts
2ee18b336a fix storage_*() calls
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20047 a1c6a512-1295-4272-9138-f99709370657
2009-02-19 17:19:42 +00:00
Maurus Cuelenaere
00baccd945 Onda VX747 bootloader: don't remove too much info..
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20031 a1c6a512-1295-4272-9138-f99709370657
2009-02-17 20:40:58 +00:00
Maurus Cuelenaere
4b0ae10319 Don't display logo in Onda VX747 bootloader (which also fixes bootloader builds)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20026 a1c6a512-1295-4272-9138-f99709370657
2009-02-16 23:54:18 +00:00
Maurus Cuelenaere
4532d145f1 Onda VX747:
* Add preliminary keymap
 * Split up generic MIPS stuff from Ingenic specific
 * Make apps/ compilable
 * Add SD driver
 * Fix RTC driver
 * Add debug screen
 * Other cleanups/rewrites/fixes


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19993 a1c6a512-1295-4272-9138-f99709370657
2009-02-13 00:45:49 +00:00
Michael Sevakis
21f0c9a282 Make basic cache functions into calls, and get rid of CACHE_FUNCTION_WRAPPERS and CACHE_FUNCTIONS_AS_CALL macros. Rename flush/invalidate_icache to cpucache_flush/invalidate. They're inlined only if an implementation isn't provided by defining HAVE_CPUCACHE_FLUSH/INVALIDATE.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19971 a1c6a512-1295-4272-9138-f99709370657
2009-02-11 12:55:51 +00:00
Maurus Cuelenaere
04c7379ac5 Onda VX747: commit some parts to get apps/ to compile (more will follow)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19954 a1c6a512-1295-4272-9138-f99709370657
2009-02-09 10:02:38 +00:00
Maurus Cuelenaere
c33209e1b9 Add optional logf display helper function for bootloaders
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19938 a1c6a512-1295-4272-9138-f99709370657
2009-02-07 13:52:03 +00:00
Maurus Cuelenaere
3f109f595c Onda VX747: enable USB in the bootloader
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19937 a1c6a512-1295-4272-9138-f99709370657
2009-02-07 11:25:35 +00:00
Michael Sevakis
4d3a020f27 Gigabeat S: Move the LCD framebuffer address so that DRAM can be mapped flat between physical and virtual addresses. NO BOOTLOADER UPDATE SHOULD BE NEEDED. The firmware image now handles low-level system setup as well.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19935 a1c6a512-1295-4272-9138-f99709370657
2009-02-07 10:09:13 +00:00
Maurus Cuelenaere
ee1e8be37f Creative ZVM:
* Re-enable USB
 * Acknowledge EP0SETUP packets
 * Spin disk down when no files get loaded in the bootloader
 * Clean up/fix some other stuff


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19931 a1c6a512-1295-4272-9138-f99709370657
2009-02-05 21:47:54 +00:00
Mark Arigo
af5c4d1b27 Silence the m:robe 100 and HDD1630 bootloaders
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19908 a1c6a512-1295-4272-9138-f99709370657
2009-02-03 04:10:49 +00:00
Michael Sevakis
47509fafa4 Fix up ZVM builds. It appeared to share common definitions with PP502x targets so use those. Remove one stale comment left behind in last commit.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19798 a1c6a512-1295-4272-9138-f99709370657
2009-01-19 14:06:47 +00:00
Michael Sevakis
616c98b38f USB detection changes. c200/e200: Consider USB to be powered when charger is plugged but detect USB connection by bus reset. When received, disconnect and restart the driver fully enabled. imx31: Fix hack used to make initial connect succeeded-- set PHY type before initial reset. General: Move some target code out of usb-drv-arc.c and implement it in respective usb sources and CPU headers so things stay clean.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19797 a1c6a512-1295-4272-9138-f99709370657
2009-01-19 13:41:25 +00:00
Mark Arigo
3482a55b83 Dual boot for the Philips HDD1630.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19741 a1c6a512-1295-4272-9138-f99709370657
2009-01-10 03:21:07 +00:00
Michael Giacomelli
c97f640060 Commit FS#9679 by Thomas Martitz. Adds c200v2 to the target tree. Has some buttons defined, a bootloader, and stubs for most drivers.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19574 a1c6a512-1295-4272-9138-f99709370657
2008-12-24 04:10:18 +00:00
Maurus Cuelenaere
9da2456c26 Fix SVN properties
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19482 a1c6a512-1295-4272-9138-f99709370657
2008-12-19 11:29:18 +00:00
Maurus Cuelenaere
40ec543052 * Add support for Onda VX747+ (FS#9674 by Olivier Barbut)
* Fix Onda VX767 support
 * Small cleanup


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19481 a1c6a512-1295-4272-9138-f99709370657
2008-12-19 11:13:58 +00:00
Michael Sevakis
cb06108024 Meg-FX: Enable a real tick in the bootloader. Do cleanups before switching to firmware and cache handling. Put proper main return address in lr.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19368 a1c6a512-1295-4272-9138-f99709370657
2008-12-08 23:31:05 +00:00
Michael Sevakis
bc963c34ae Hopefully mop-up remaining red.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19317 a1c6a512-1295-4272-9138-f99709370657
2008-12-03 21:15:44 +00:00
Björn Stenberg
a091d20ba0 Added 'keywords' and 'eol-style' properties.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19218 a1c6a512-1295-4272-9138-f99709370657
2008-11-25 19:54:23 +00:00
Rafaël Carré
2b39cb4b77 Sansa AMS bootloader: consider the bootloader finished
Be verbose only if a keypress has been detected.
Use enable/disable_irq() instead of inline assembly

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19213 a1c6a512-1295-4272-9138-f99709370657
2008-11-25 15:43:38 +00:00
Jonathan Gordon
76e662b8e5 fix the e200r installer so it compiles again (storage rework broke it)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19195 a1c6a512-1295-4272-9138-f99709370657
2008-11-24 04:43:31 +00:00
Björn Stenberg
b69be10d98 Use BOOTDIR and BOOTFILE defines instead of hardcoded path and file. FS#9559
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19190 a1c6a512-1295-4272-9138-f99709370657
2008-11-23 22:07:48 +00:00
Frank Gevaerts
ac355de664 Don't print partition sizes in megabytes, as that is buggy on 5.5G. Use sectors instead
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19170 a1c6a512-1295-4272-9138-f99709370657
2008-11-21 15:20:25 +00:00
Björn Stenberg
c6b3d38a15 New makefile solution: A single invocation of 'make' to build the entire tree. Fully controlled dependencies give faster and more correct recompiles.
Many #include lines adjusted to conform to the new standards.


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19146 a1c6a512-1295-4272-9138-f99709370657
2008-11-20 11:27:31 +00:00
Rob Purchase
9f0fbec999 Show the Rockbox logo in the Telechips bootloader.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19129 a1c6a512-1295-4272-9138-f99709370657
2008-11-17 21:16:00 +00:00
Karl Kurbjun
f32336e4a5 Last commit for the flash bootloader. The bootloader build works properly either flashed or unflashed.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19098 a1c6a512-1295-4272-9138-f99709370657
2008-11-12 05:11:18 +00:00
Karl Kurbjun
59d4d2025c Revert last commit (accidentally committed the whole tree)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19095 a1c6a512-1295-4272-9138-f99709370657
2008-11-12 04:15:34 +00:00
Karl Kurbjun
d42041043b Add in the needed crt0.S code for the wakeup alarm also
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19094 a1c6a512-1295-4272-9138-f99709370657
2008-11-12 03:57:32 +00:00
Jonathan Gordon
ce505b8a01 the delay in the as3525 bootloader was driving me mad so remove it and get the bootloader closer to where a "finished" one should be (only show info if sometrhing needs to be shown, which is always for now.)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19085 a1c6a512-1295-4272-9138-f99709370657
2008-11-11 11:01:55 +00:00
Rafaël Carré
f7b1d806e6 Sansa AMS bootloader: use the correct (renamed) header file
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19075 a1c6a512-1295-4272-9138-f99709370657
2008-11-10 20:36:02 +00:00
Bertrik Sikken
4ca4e523fe Rename functions as3525_codec_* to ascodec_* to prepare re-use of as3514 code for sansa v2 players
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19047 a1c6a512-1295-4272-9138-f99709370657
2008-11-09 09:25:53 +00:00
Rafaël Carré
aef27e1f0c Sansav2 Bootloader
Adds read-only SD driver, largely copied from ata-sd-pp.c
Only tested on the embedded SD, on the Clip
First steps to build a Normal firmware

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19045 a1c6a512-1295-4272-9138-f99709370657
2008-11-09 06:17:21 +00:00
Rafaël Carré
6e645cc4eb AS3525: we won't use threads in the bootloader
Disable tick_start()
Call kernel_init() _after_ system_init()

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19028 a1c6a512-1295-4272-9138-f99709370657
2008-11-06 15:24:19 +00:00
Rafaël Carré
baecdb632c AS3525: use kernel_init() in bootloader
This way creation of scrolling thread doesn't risk crashing the system

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19026 a1c6a512-1295-4272-9138-f99709370657
2008-11-06 02:31:40 +00:00
Frank Gevaerts
86f0c75cde fix red
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18976 a1c6a512-1295-4272-9138-f99709370657
2008-11-02 01:31:52 +00:00
Frank Gevaerts
2f8a0081c6 Apply FS#9500. This adds a storage_*() abstraction to replace ata_*(). To do that, it also introduces sd_*, nand_*, and mmc_*.
This should be a good first step to allow multi-driver targets, like the Elio (ATA/SD), or the D2 (NAND/SD).


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18960 a1c6a512-1295-4272-9138-f99709370657
2008-11-01 16:14:28 +00:00
Frank Gevaerts
19d1cacb1a cleanup storage defines
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18950 a1c6a512-1295-4272-9138-f99709370657
2008-10-31 21:25:04 +00:00
Rafaël Carré
e1b4838481 Embryo of a SD driver for Sansav2
Debug code included, needed until the bootloader is ready

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18926 a1c6a512-1295-4272-9138-f99709370657
2008-10-29 20:21:59 +00:00
Dave Chapman
8df1a7e29a e200v2: implement the backlight handling (copy/paste from the c200v1/e200v1 code - this should probably be unified, along with other upcoming v2 code), plus clean up the lcd init by calling lcd_init() directly in the bootloader, instead of lcd_init_device().
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18910 a1c6a512-1295-4272-9138-f99709370657
2008-10-29 01:42:03 +00:00
Rafaël Carré
b3ee07c22e Sansav2 : initializes SDRAM
The AS3525 SoC ships with an ARM PL172 MPMC controller
Also correct the memory sizes in tools/configure

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18899 a1c6a512-1295-4272-9138-f99709370657
2008-10-28 11:24:29 +00:00
Bertrik Sikken
95726a5c23 FS#9503 - Sansa v2 audio/PMU communication driver (for the AS3525 SoC)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18886 a1c6a512-1295-4272-9138-f99709370657
2008-10-26 13:28:52 +00:00
Frank Gevaerts
4f81a54829 Add c200 erase tools. The resulting .bin files can be run from e200tool
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18854 a1c6a512-1295-4272-9138-f99709370657
2008-10-21 18:57:11 +00:00
Dave Chapman
08c41d42bb Add e200v2 and m200v2 targets. Move the telechips lcd-ssd1815.c (currently used by Logik DAX and m200v1 ports) driver up in the target tree and share with the m200v2 - as2525 parts contributed by Rafael Carre. Includes the start (but is still very incomplete) of an LCD driver for the e200v2. m200v2 is not yet fully supported by mkamsboot - that will come soon. Also some minor cleanups for the Clip.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18836 a1c6a512-1295-4272-9138-f99709370657
2008-10-19 14:11:01 +00:00
Frank Gevaerts
49ec9ea190 Make the meizu m3 load from flash, so interrupts work. More work is needed to get the m6sl "working" again
(patch by Denes Balatoni, FS#9499)


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18827 a1c6a512-1295-4272-9138-f99709370657
2008-10-18 22:28:59 +00:00
Vitja Makarov
91b9c6139b telechips usb: not ready for use but, something is working, needs improvement.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18806 a1c6a512-1295-4272-9138-f99709370657
2008-10-14 05:13:21 +00:00
Dave Chapman
5134612ca9 Remove usage of snprintf and strlen and instead calculate things at compile-time. Also swap the positions of the version text and logo for the Clip so we don't get a multi-coloured logo
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18793 a1c6a512-1295-4272-9138-f99709370657
2008-10-12 22:35:03 +00:00
Frank Gevaerts
2cc85bc346 Fix LCD timings on the older meizu M3 variant, so it works with a fast clock.
(FS#9484, by Denes Balatoni)



git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18784 a1c6a512-1295-4272-9138-f99709370657
2008-10-12 16:55:57 +00:00
Dave Chapman
da8bff107e Commit FS#9467 - initial work on port to Sansa Clip by Rafaël Carré and François Dinel. A few cosmetic changes were made by me prior to committing: 1) TAB policing in button-clip.c; 2) Add François Dinel to CREDITS; 3) Add François Dinel as (C) holder in button-target.h (it was previously blank); 4) Add Rockbox header to bootloader/sansa_as3525.c with Rafaël Carré as (C) holder; 5) Change target_id to 50 (next available number) in tools/configure and fixed indentation; 6) Change MODEL_NUMBER in config-clip.h to 50 (next available number); 7) Remove unused in/out macros from system-target.h
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18782 a1c6a512-1295-4272-9138-f99709370657
2008-10-12 16:46:01 +00:00
Frank Gevaerts
68d9fb95de lcd now shows things on the old-style Meizu M3.
It needs to be re-tested on the new-style, colours are wrong, and timing loops need to be reviewed



git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18740 a1c6a512-1295-4272-9138-f99709370657
2008-10-07 21:12:03 +00:00
Frank Gevaerts
2d5e6e1a87 LCD driver for meizu M3, new type (older M3s are not yet supported)
Thanks to Denes Balatoni


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18719 a1c6a512-1295-4272-9138-f99709370657
2008-10-05 20:01:25 +00:00
Dave Chapman
85807cd44e Trivial changes to make the main Rockbox builds for the Sansa m200 and Logik DAX ports compile. Note that some codecs are currently disabled (due to lowmem on these targets), but that needs more work and analysis to decide how much RAM we want to allocate to codecs.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18566 a1c6a512-1295-4272-9138-f99709370657
2008-09-22 19:15:18 +00:00
Marcoen Hirschberg
48e45f5751 add Meizu M6SP and M3 ports
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18544 a1c6a512-1295-4272-9138-f99709370657
2008-09-17 23:22:11 +00:00
Maurus Cuelenaere
9407ae838e Onda VX747:
* Button driver rework
 * Backlight driver rework
 * LCD driver rework


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18543 a1c6a512-1295-4272-9138-f99709370657
2008-09-17 21:44:47 +00:00
Frank Gevaerts
c0e898ae29 Now reads the LCD controller ID succesfully and flashes it using the backlight
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18531 a1c6a512-1295-4272-9138-f99709370657
2008-09-16 16:51:25 +00:00
Maurus Cuelenaere
1e294e3f25 Onda VX747:
* Get rid of bug when interrupts are enabled
 * Get threading to work (although with some weirdness)
 * Other fixes/optimizations


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18512 a1c6a512-1295-4272-9138-f99709370657
2008-09-14 16:26:08 +00:00
Frank Gevaerts
1898ff753f * move qt1106 specific things to their own files
* use CHANGE pin


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18496 a1c6a512-1295-4272-9138-f99709370657
2008-09-11 18:18:40 +00:00
Maurus Cuelenaere
1ff9ce202d Fix mrobe500 svn:*
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18482 a1c6a512-1295-4272-9138-f99709370657
2008-09-10 19:35:15 +00:00
Frank Gevaerts
3637ef9b32 First reading out of the touchpad!
disabled power handling for now, so the device will power off when unplugged again (because there is no other poweroff method provided)


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18480 a1c6a512-1295-4272-9138-f99709370657
2008-09-10 19:08:46 +00:00
Maurus Cuelenaere
23fc923bde ZVM:
* Optimize MiniFS handling
 * Add basic CFS handling (doesn't work yet)
 * Remove hacky stuff in disk.c


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18438 a1c6a512-1295-4272-9138-f99709370657
2008-09-07 17:24:14 +00:00
Dave Chapman
d462a64a91 Initial commit of iaudio 7 port by Vitja Makarov (FS#9245). Port is at quite an advanced stage, but is troubled by the lack of a reliable NAND driver (similar to the Cowon D2 port) and is not yet suitable for non-developers.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18435 a1c6a512-1295-4272-9138-f99709370657
2008-09-06 17:50:59 +00:00
Maurus Cuelenaere
e144638167 Add Onda VX767 target
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18422 a1c6a512-1295-4272-9138-f99709370657
2008-09-05 15:09:40 +00:00
Maurus Cuelenaere
5420c3f672 Share bootloader with Creative ZVM 30GB/60GB and Creative ZV
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18415 a1c6a512-1295-4272-9138-f99709370657
2008-09-04 19:53:16 +00:00
Frank Gevaerts
e278b4fddb Turn off automatically after a number of backlight toggles.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18387 a1c6a512-1295-4272-9138-f99709370657
2008-09-02 20:19:58 +00:00
Maurus Cuelenaere
78d44385fe Fix TABing
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18353 a1c6a512-1295-4272-9138-f99709370657
2008-08-27 20:35:41 +00:00
Maurus Cuelenaere
944c33403c * Commit dual-boot support for Creative ZVx family
* Add mkzenboot: makes it possible to integrate Rockbox bootloader with
   Creative firmwares without the need of distributing binaries
 * Add Tadeusz Pyś to credits, who figured out the minifs file system
 * Fix bootloader


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18352 a1c6a512-1295-4272-9138-f99709370657
2008-08-27 20:32:12 +00:00
Maurus Cuelenaere
62c4a2838e Onda VX747:
* Overall cleanup (still needs work)
  * Add preliminary USB support
  * Add power off support
  * Add preliminary MMU handling


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18348 a1c6a512-1295-4272-9138-f99709370657
2008-08-26 21:48:49 +00:00
Maurus Cuelenaere
1392dc2144 Commit FS#9308: differentiate between TOUCHPAD & TOUCHSCREEN
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18338 a1c6a512-1295-4272-9138-f99709370657
2008-08-23 09:46:38 +00:00
Maurus Cuelenaere
4bf4d2bb55 * Get interrupts working (but crashes after 10-30secs)
* Make current_tick increase
* Convert button driver into SADC driver
* Make touchscreen handling work better (still needs good calibration routine)


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18240 a1c6a512-1295-4272-9138-f99709370657
2008-08-10 21:44:48 +00:00
Maurus Cuelenaere
447ffc8bf8 * Add interrupt handling (but still not working)
* Clean up linker script and bootup routines


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18229 a1c6a512-1295-4272-9138-f99709370657
2008-08-09 23:31:38 +00:00
Barry Wardell
1ac260c0e6 Fix H10 bootloader locking up if the scroll pad was touched. May also fix any other lock ups from trying to read from the adc in the bootloader.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18208 a1c6a512-1295-4272-9138-f99709370657
2008-08-07 11:23:40 +00:00
Maurus Cuelenaere
88ae9024e4 * Add basic (non-working) support for NAND flash
* Add panicf() handling
* Add not-yet-enabled dma acceleration
* Other (minor) fixes


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18203 a1c6a512-1295-4272-9138-f99709370657
2008-08-06 20:39:02 +00:00
Maurus Cuelenaere
06e3c660cc Prepare Creative bootloader compilation for future dual boot integration
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18187 a1c6a512-1295-4272-9138-f99709370657
2008-08-03 19:32:14 +00:00
Maurus Cuelenaere
06efd071a9 Updated bootloader containing more debug information
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18151 a1c6a512-1295-4272-9138-f99709370657
2008-07-30 10:24:39 +00:00
Maurus Cuelenaere
1f692e5f55 1) Set svn:keywords where they should've been set
2) Onda VX747 specific changes


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18080 a1c6a512-1295-4272-9138-f99709370657
2008-07-17 10:13:56 +00:00
Maurus Cuelenaere
975261f003 Fix the LCD bug!
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18071 a1c6a512-1295-4272-9138-f99709370657
2008-07-16 15:25:35 +00:00
Maurus Cuelenaere
ea9d107320 Forgot a file..
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18053 a1c6a512-1295-4272-9138-f99709370657
2008-07-15 17:20:07 +00:00
Maurus Cuelenaere
e6248f2e5d Remove svn:executable
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18033 a1c6a512-1295-4272-9138-f99709370657
2008-07-14 15:09:22 +00:00
Maurus Cuelenaere
0709f0a5c6 Add preliminary support for the Onda VX747 (MIPS target)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18032 a1c6a512-1295-4272-9138-f99709370657
2008-07-14 15:03:10 +00:00
Marc Guay
f6cde72ce9 Fix a few dead references in the manual and add an 's' where one was missing.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17972 a1c6a512-1295-4272-9138-f99709370657
2008-07-06 21:32:59 +00:00
Jens Arnold
b1e16d2161 Repair charging screen on archos. usb_detect() doesn't return a boolean since 2007-09-04. Fixed same problem in the m:robe 500 bootloader and in bootbox.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17955 a1c6a512-1295-4272-9138-f99709370657
2008-07-06 12:14:13 +00:00
Daniel Stenberg
2acc0ac542 Updated our source code header to explicitly mention that we are GPL v2 or
later. We still need to hunt down snippets used that are not. 1324 modified
files...
http://www.rockbox.org/mail/archive/rockbox-dev-archive-2008-06/0060.shtml


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17847 a1c6a512-1295-4272-9138-f99709370657
2008-06-28 18:10:04 +00:00
Marcoen Hirschberg
7b10ef9a7c initial Meizu M6SL port (take 2)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17819 a1c6a512-1295-4272-9138-f99709370657
2008-06-27 23:24:34 +00:00
Mark Arigo
22e7bf32b8 My Devcon 2008 contribution: port for Philips GoGear HDD1630 (PP5022-based). Current status is that the bootloader works to load Rockbox, but dual boot does not work: it freezes after decrypting the OF. When Rockbox boots, it freezes somewhere between showing the logo and the main menu. And there's no driver for the touchpad. So lots of work left.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17809 a1c6a512-1295-4272-9138-f99709370657
2008-06-27 18:40:25 +00:00
Marc Guay
b93667b306 Add the Sansa c100 as a build target with basic drivers.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17742 a1c6a512-1295-4272-9138-f99709370657
2008-06-21 15:18:36 +00:00
Mark Arigo
badb6dae62 Add mi4 key for the Philips GoGear HDD1630 (PP5022-based)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17660 a1c6a512-1295-4272-9138-f99709370657
2008-05-30 04:14:23 +00:00
Mark Arigo
b4275d4941 Philips GoGear SA9200 port. Working bootloader and normal builds, including sound. No touchpad now, buttons limited to using vol+/vol-/power for up/down/select. Rockbox USB is enabled since the OF is MTP only...read the warnings on the PortalPlayerUsb wiki page.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17591 a1c6a512-1295-4272-9138-f99709370657
2008-05-21 03:55:17 +00:00
Barry Wardell
63f4f68a74 Don't need this any more since it's the default now.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17457 a1c6a512-1295-4272-9138-f99709370657
2008-05-11 15:30:15 +00:00
Michael Sevakis
80278e45aa Bring Gigabeat S bootloader one step close to a release version.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17442 a1c6a512-1295-4272-9138-f99709370657
2008-05-10 18:00:11 +00:00
Michael Sevakis
c41cacaf30 Do some gigabeat S bootloader cleanup (includes, const, static-ing, number of variables, etc.). Make sure a tar file isn't too big before loading it however unlikely that is. No overall functional change but bump to v.00000013 for tracking purposes.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17403 a1c6a512-1295-4272-9138-f99709370657
2008-05-07 07:14:39 +00:00
Michael Sevakis
0218397cf4 Gigabeat S bootloader: 1) Switch order of .vectors to be contiguous with initialized sections. 2) Clean all caches in main before doing anything else because vector copying counts as self-modifying code. Up to v.00000012.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17381 a1c6a512-1295-4272-9138-f99709370657
2008-05-05 13:30:29 +00:00
Barry Wardell
536d2feedb Oops. Forgot to svn add this.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17375 a1c6a512-1295-4272-9138-f99709370657
2008-05-05 12:12:55 +00:00
Barry Wardell
940091ae38 FS#7977: Bootloader logo for PP-based targets (H10, Sansa, M-Robe 100).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17374 a1c6a512-1295-4272-9138-f99709370657
2008-05-05 12:05:00 +00:00
Michael Sevakis
75fe8875bc Fix firmware load error display and handling in Gigabeat S bootloader. Remove "Hello World". v.00000011 now.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17347 a1c6a512-1295-4272-9138-f99709370657
2008-05-04 03:44:49 +00:00
Dave Chapman
f2042983f0 Add the Sansa M200 (v1) as a target - it's extremely similar to the Logik DAX (the LCD driver worked unchanged). Plus various tcc77x work, including a working tick interrupt (enabled in the bootloader). Rockbox itself builds for the M200 (there are no keymaps yet for the DAX), but doesn't progress very far due to the lack of an ATA (NAND flash) driver.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17306 a1c6a512-1295-4272-9138-f99709370657
2008-05-02 19:12:09 +00:00
Jens Arnold
2bbacf89fe Make sure the linker considers crt0*.o before all files specified on the command line by using STARTUP() instead of INPUT() in the .lds. Using INPUT() makes the linker process crt0*.o after all files specified on the command line, making linking fail if there are librockbox.a members which are only referenced by crt0*.o. Remove the hackaround that was needed for building the gigabeat S bootloader before (aka UIE() problem).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17289 a1c6a512-1295-4272-9138-f99709370657
2008-04-29 06:19:32 +00:00
Rob Purchase
18b004b330 Enable 'touchscreen areas' on the D2, based on JdGordon's m:robe code. Disable the bootloader debug screen, as that stuff is all available from the Debug menu now.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17257 a1c6a512-1295-4272-9138-f99709370657
2008-04-27 13:30:11 +00:00
Karl Kurbjun
7510335fc4 This is a big chunk of code necessary to prepare for Gigabeat F flash loading and and implementation of rolo. There should be no noticible changes for the user. A new bootloader is not needed.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17213 a1c6a512-1295-4272-9138-f99709370657
2008-04-22 04:34:25 +00:00
Michael Sevakis
8ec1dca0da Enable program flow prediction in the system control coprocessor setup in the bootloader.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17211 a1c6a512-1295-4272-9138-f99709370657
2008-04-21 21:45:58 +00:00
Michael Sevakis
2920359cca Unreverse Gigabeat S bootloader. Boot Rockbox with hold switch off.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17203 a1c6a512-1295-4272-9138-f99709370657
2008-04-21 04:34:39 +00:00
Michael Sevakis
9003dbe5b2 Make the inital connect problem go away on Gigabeat S. Would be nice if a better way were found but it works for me. Update the bootloader to have it work.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17181 a1c6a512-1295-4272-9138-f99709370657
2008-04-20 03:30:57 +00:00
Michael Sevakis
94f7d0f290 UMS for the Gigabeat S. Bootloader USB mode. Has a couple quirks 1) First plug has problems if cold. Replug if it doesn't connect or not at high speed 2) Linux doesn't like the odd bootable flag value used in the partitions so it won't mount but Windows works. Fix minor OTG driver bugs and clean up device memory handling. Generic name for ARC controller driver.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17154 a1c6a512-1295-4272-9138-f99709370657
2008-04-18 16:42:50 +00:00
Nicolas Pennequin
90a3d58013 Gigabeat S bootloader: Improve untarring by reading the whole file to memory before starting to write the output files.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17136 a1c6a512-1295-4272-9138-f99709370657
2008-04-16 00:38:06 +00:00
Nicolas Pennequin
620e6b4d93 Gigabeat S bootloader: make it move a rockbox binary back to /.rockbox/ when it finds one in the MTP directory.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17133 a1c6a512-1295-4272-9138-f99709370657
2008-04-15 23:17:03 +00:00
Jonathan Gordon
5b5a626bb6 Setup the touchpads to have two modes - stylus and button - and set them in button mode by default.
in button mode the touchpad is split into a 3x3 grid for 9 seperate buttons which can be used by the action system like real buttons.
Unify the keymap file for the touchpads in button mode. the target keymap file only needs to worry about real buttons.
(As these ports mature each screen will need to be fixed seperatly to be able to use stylus mode (the lists can already but don't change mode just yet.)


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17114 a1c6a512-1295-4272-9138-f99709370657
2008-04-15 10:35:11 +00:00
Daniel Stenberg
7387a0470e sync with key list with mi4code and add the single mi4 key it had but this
still didn't


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17077 a1c6a512-1295-4272-9138-f99709370657
2008-04-11 21:11:55 +00:00
Mark Arigo
f46a7533a4 mi4 key for the Philips GoGear SA9200 (PP5024). Let the fun begin...
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17069 a1c6a512-1295-4272-9138-f99709370657
2008-04-11 03:57:16 +00:00
Rob Purchase
f4deea6027 D2: Update dual boot to use the hold switch. Update bootloader to show messages until HOLD released, keep holding POWER to show old debug screen (these modes will eventually be removed).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17032 a1c6a512-1295-4272-9138-f99709370657
2008-04-08 08:01:18 +00:00
Jens Arnold
02580851ad Revert... stupid svn doesn't complain when passing -m twice :(
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16939 a1c6a512-1295-4272-9138-f99709370657
2008-04-02 22:45:23 +00:00
Jens Arnold
01a106dbfa Make the measured LCD scanrates from the greylib known to the scanrate test plugin.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16938 a1c6a512-1295-4272-9138-f99709370657
2008-04-02 22:42:21 +00:00
Michael Sevakis
ec05b66b5d That was stupid. Should be enable_interrupt.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16898 a1c6a512-1295-4272-9138-f99709370657
2008-03-31 06:05:16 +00:00
Michael Sevakis
75f2d441e9 Change the remaining set_interrupt_status usage to the more parsimonious disable/enable/restore.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16897 a1c6a512-1295-4272-9138-f99709370657
2008-03-31 06:00:23 +00:00
Rob Purchase
3b46671a40 Make the Telechips bootloader slightly less messy, kill some warnings and allow entry to the bootloader debug screen via the D2's hold switch.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16879 a1c6a512-1295-4272-9138-f99709370657
2008-03-29 17:26:16 +00:00
Marcoen Hirschberg
82c52302bd split boot.lds and move it into the target tree
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16855 a1c6a512-1295-4272-9138-f99709370657
2008-03-27 23:58:03 +00:00
Marcoen Hirschberg
b2ec13d8f1 Revert "initial Meizu M6SL port"
This reverts commit b7bd17ce1715c3a8acbf74a63694c28b6075da5b.


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16846 a1c6a512-1295-4272-9138-f99709370657
2008-03-27 11:53:51 +00:00
Marcoen Hirschberg
c7e5d78241 initial Meizu M6SL port
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16844 a1c6a512-1295-4272-9138-f99709370657
2008-03-27 11:29:24 +00:00
Dave Chapman
f0cde2dff9 Don't make the Sansa bootloaders verbose when USB is connected
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16836 a1c6a512-1295-4272-9138-f99709370657
2008-03-27 00:31:51 +00:00
Daniel Stenberg
08cabe9169 kill the release script and build tarball from *everything* in SVN...
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16818 a1c6a512-1295-4272-9138-f99709370657
2008-03-26 13:12:07 +00:00
Michael Sevakis
af395f4db6 Do core interrupt masking in a less general fashion and save some instructions to decrease size and speed things up a little bit. Small fix to a few places where interrupts would get enabled again where they shouldn't have been (context switching calls when disabled).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16811 a1c6a512-1295-4272-9138-f99709370657
2008-03-26 01:50:41 +00:00
Jens Arnold
1f4bcc86da Revert accidental tree commit. /me needs a smaller enter key...
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16805 a1c6a512-1295-4272-9138-f99709370657
2008-03-25 19:57:23 +00:00
Jens Arnold
9a7978aeab Cabbiev2 gigabeat background: reduce WPS backdrop filesize by storing it as 24 bit BMP instead of unnecessary 32 bit.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16802 a1c6a512-1295-4272-9138-f99709370657
2008-03-25 19:43:08 +00:00
Rob Purchase
4dc2d8ddba Enable tick IRQs on TCC780x. The main menu is now working on the D2.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16749 a1c6a512-1295-4272-9138-f99709370657
2008-03-22 19:41:51 +00:00
Jens Arnold
d700970f86 Cosmetic fixes for the iAudio bootloader: Don't display 'Hold switch on' if the reason for getting there was a spurious ON event. Don't disable the multi-colour LED in the M3 bootloader.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16690 a1c6a512-1295-4272-9138-f99709370657
2008-03-18 00:17:21 +00:00
Jens Arnold
ed3ff1b0b5 Various coldfire fixes: (1) iAudio Bootloader: Check the status of main & remote power button vs. the respective hold switch, and shut down when on hold. On X5/M5 this check is not strictly necessary for the main unit, but left there to keep things uniform. (2) M3: Stop reading the ADC properly before leaving the bootloader, on RoLo, and on reboot, to make it work reliably after those transitions. (3) Disable all interrupt sources on system init to avoid premature ISR calls after enabling interrupts in general. (4) iAudios: Proper implementation of ide_powered(), avoiding nasty HDD clicks in the bootloader when powering down, e.g. because of Hold. (5) Slight optimisations.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16689 a1c6a512-1295-4272-9138-f99709370657
2008-03-17 23:47:38 +00:00
Jens Arnold
80ded2ad7c Really fix low-bat detection in the iAudio bootloader. * Improve naming of iriver and iaudio bootloader files.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16649 a1c6a512-1295-4272-9138-f99709370657
2008-03-12 23:19:44 +00:00
Rob Purchase
c8836112c6 Cowon D2: Make the bootloader functional (usage instructions to appear on the CowonD2Info wikipage shortly). Also re-enable IRAM by reducing Tremor's ICODE usage.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16646 a1c6a512-1295-4272-9138-f99709370657
2008-03-12 20:57:19 +00:00
Jens Arnold
769fcbd4d9 More iAudio M3 work. Bootloader compiles, but doesn't work yet.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16645 a1c6a512-1295-4272-9138-f99709370657
2008-03-12 20:35:42 +00:00
Rob Purchase
562b9de7cb D2: Make lcd_init_device() actually turn on the LCD, in preparation for booting the main image. Previously this required an explicit lcd_enable(true).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16523 a1c6a512-1295-4272-9138-f99709370657
2008-03-05 00:21:56 +00:00
Robert Kukla
6ef63a5373 m:robe 100: use power button for dual-booting the OF (short press to boot rockbox, long press for OF)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16522 a1c6a512-1295-4272-9138-f99709370657
2008-03-05 00:17:21 +00:00
Nicolas Pennequin
e2f5f21e5b Give the Gigabeat S bootloader the ability to untar a tarball.
To test a build, use 'make tar' and send the tar to the unit. The bootloader will unarchive it and delete it before loading the main binary.
This is a temporary hack to make testing possible until we have a better way of sending a complete build.
Also enable writing to the disk by disabling the optimised write stubs.


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16338 a1c6a512-1295-4272-9138-f99709370657
2008-02-17 23:17:08 +00:00
Christian Gmeiner
868fcce96c Shutdown needs about 2 seconds, but it seems to work :)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16317 a1c6a512-1295-4272-9138-f99709370657
2008-02-16 12:44:15 +00:00
Rob Purchase
addb5228ec D2: Further work-in-progress on the NAND driver.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16308 a1c6a512-1295-4272-9138-f99709370657
2008-02-13 23:50:44 +00:00
Björn Stenberg
2f7cffa204 Major USB fixes by Frank Gevaerts. Still disabled in builds, #define USE_ROCKBOX_USB to test.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16279 a1c6a512-1295-4272-9138-f99709370657
2008-02-11 14:26:25 +00:00
Miika Pekkarinen
698113d9db Prepare for a new bootloader 7-pre4 release for iriver H100 series. Synced to work properly with SVN, and hopefully fixed remote detection problem and audio thump for some users. Also pure H100/H115 should be supported now. Actual bootloaders will be released separately.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16252 a1c6a512-1295-4272-9138-f99709370657
2008-02-09 15:06:09 +00:00
Michael Sevakis
a07c034de7 Gigabeat S: Interrupt enabled bootloader. Miscellaneous integration changes.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16243 a1c6a512-1295-4272-9138-f99709370657
2008-02-08 02:20:05 +00:00
Michael Sevakis
1f021af60c Gigabeat S mixer: Make some progress. Get the tick and core sleep working using the AVIC. Redo the startup code to remap from IRAM and not include the lcd driver frambuffer in the remapping (until it can be moved). Clean up LCD driver. For other misc. changes, see the diffs. Now it progresses to ATA init and fails with -11 but without crashing or hanging. Replace all bootloaders.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16216 a1c6a512-1295-4272-9138-f99709370657
2008-02-05 04:43:19 +00:00
Rob Purchase
5991478628 Read ID codes & raw page data from D2 NAND flash (work in progress;
no logical->physical address translation yet)


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16167 a1c6a512-1295-4272-9138-f99709370657
2008-01-25 21:37:59 +00:00
Rob Purchase
47ea030e2e Initial Cowon D2 commit:
* bootloader test program (basic LCD & button drivers, reads touchscreen)
* work-in-progress stubs for main build


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16090 a1c6a512-1295-4272-9138-f99709370657
2008-01-14 22:04:48 +00:00
Mark Arigo
e66ddd754f Initial commit for the Olympus m:robe 100 port (PP5020). The LCD driver works. The ADC driver was copied from the H10 port (they can probably be combined later), but the battery readings aren't right and it shuts down. The touch pad buttons do not work. Install the bootloader and rockbox the H10 way. Still lots of work to do.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16030 a1c6a512-1295-4272-9138-f99709370657
2008-01-09 07:24:43 +00:00
Will Robertson
32f6109fb1 Gigabeat S memory management stuff.
* Moved crt0.S to imx31 subdirectory, as it was the last target using the unified file.
* DRAM is now remapped to 0x0, facilitating interrupts (which aren't done yet)


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15965 a1c6a512-1295-4272-9138-f99709370657
2007-12-23 12:19:40 +00:00
Nicolas Pennequin
c2ca8c710c * Make the Gigabeat S bootloader a bit more interesting: it looks for the first firmware file it finds on the second partition and attempts to load it. Loading fails to get past the splash screen though.
* Make the main binary compile.
To send a firmware file, use mtp-sendfile. To update you'll need to delete the previous firmware file, as files are named sequentially and the first one is loaded.


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15836 a1c6a512-1295-4272-9138-f99709370657
2007-11-27 15:40:29 +00:00
Björn Stenberg
7af22e1a86 Red fix: USB power check implemented in driver instead
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15761 a1c6a512-1295-4272-9138-f99709370657
2007-11-22 22:17:45 +00:00
Jens Arnold
afd5174eaf Fix iPod Nano & Video bootloaders. Backlight uses sleep(), hence it must be initialised after kernel_init().
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15743 a1c6a512-1295-4272-9138-f99709370657
2007-11-21 21:28:46 +00:00
Christian Gmeiner
21ac3110f1 * dont compile audio codec drivers for bootloader, as we dont need them -> saves time
* dont include uda1380 in bootloaders
* fix to get rid of a nasty humming sound during is not uda1380 specific but iriver
  specific and so put the fix into the bootloader. An other option was to 
  put audiohw_reset() into target tree... but i want to get rid of audiohw_reset


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15721 a1c6a512-1295-4272-9138-f99709370657
2007-11-20 12:09:59 +00:00
Jonathan Gordon
fc8e09d79d shutdown if hold is on in the non-ipod-pp target bootloaders.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15679 a1c6a512-1295-4272-9138-f99709370657
2007-11-19 02:07:40 +00:00
Jens Arnold
ef12b3b5c6 Hardware controlled backlight brightness for iPod Video and Nano, retaining the software PWM fade in/ fade out. * Backlight handling cleanup, getting rid of one layer of 'lowlevelness'. * Use atomic GPIO bit manipulation for PP502x backlight handling.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15599 a1c6a512-1295-4272-9138-f99709370657
2007-11-12 18:49:53 +00:00