Split apart ipod6g installation instructions from the rest. For unknown
reasons the \opt and \nopt tests were causing the \code blocks to go wonky
Change-Id: I99b96cd17bd817e18b3487a92b66e966e39397d6
Add bottom left as quickscreen and bottom right as hotkey acroos the
board for fuze+. Meant as a
stopgap until gesture support becomes good enough that it is unnecessary
Also adds my name to CREDITS
Change-Id: If1729b7d53d967081b6d97a9a49cd66312c96ed4
This ports id Software's Quake to run on the SDL plugin runtime. The
source code originated from id under the GPLv2 license. I used
https://github.com/ahefner/sdlquake as the base of my port.
Performance is, unsurprisingly, not on par with what you're probably
used to on PC. I average about 10FPS on ipod6g, but it's still
playable.
Sound works well enough, but in-game music is not supported. I've
written ARM assembly routines for the inner sound loop. Make sure you
turn the "brightness" all the way down, or colors will look funky.
To run, extract Quake's data files to /.rockbox/quake. Have fun!
Change-Id: I4285036e967d7f0722802d43cf2096c808ca5799
This is a port of Wolf4SDL, which is derived from the original id
software source release. The port runs on top of the SDL plugin
runtime and is loaded as an overlay.
Licensing of the game code is not an issue, as discussed below
(essentially, the Debian project treats Wolf4SDL as GPLv2, with an
email from John Carmack backing it up):
http://forums.rockbox.org/index.php?topic=52872
Included is a copy of MAME's Yamaha OPL sound chip emulator
(fmopl_gpl.c). This file was not part of the original Wolf4SDL source
(which includes a non-GPL'd version), but was rather rebased from from
a later MAME source which had been relicensed to GPLv2.
Change-Id: I64c2ba035e0be7e2f49252f40640641416613439
Adds screenshots for all supported targets. Also adds a bit of information
to point users to the data files.
Change-Id: I5e0f1bcdb73690a14616a3e486228c73b1617ffc
Original patch by Alexander Spyridakis
Modified by Steve Bavin and Igor Poretsky
Keymap fixes by Marianne Arnold
Change-Id: I5a252d97d2b05c533e048931f7354f4261f76499
Modified version from ticket, taken from Igor Poretsky's tree, and
further modified to incorporate feedback.
Change-Id: I9284497d53a0247a51739d29fdc1db5fbbebfadc
Allow user to select cpu undervolt
There have been quite a few issues across the SANSA AMS line related
to CPU undervolting while most players show greatly increased runtime
some crash.
Rather than constanly upping the voltage we now have a
setting with a safe value for all players and the option for lower voltages
I plan to add a few other options here later such as disk
timings and maybe some other clocks/experimental settings
Added: Disk Low speed option for AS3525v2 devices cuts
frequency to 12 MHz from 24 MHz
Added: Disk Low speed option for AS3525v1 devices cuts
frequency to 15.5 MHz from 31 MHz
Added: I2c Low Speed AS3525 devices, should be bigger improvement for v1 devices
Fixed: Debug menu for AS3525v2 No SDSLOT frequency,
Showed IDE freq though it is unused
Added: DBOP and SSP underclocking affects display on v1/v2 respectively
Fixed: debug menu now has SSP frequency, and SSP_CPSR
Update: made settings menu more generic
Update: cleaned up code
Added: Clip v1 & Fuze v1 didn't have HAVE_ADJUSTABLE_CPU_VOLTAGE.
not sure why but, waiting on testing to confirm
Added: C200v2 and E200v2 devices and HAVE_ADJUSTABLE_CPU_VOLTAGE.
Fixed: v1 devices don't like display timing set lower (dbop)
v1 devices don't have a divider set for ssp (causes divide by 0)
Fixed: ClipZip display lags with Max SSP divider changed from 0xFE to 0x32
Fixed: v1 devices didn't work properly with highspeed sd cards
Added code from http://gerrit.rockbox.org/r/#/c/1704/
Added powersave and IDE interface enable/disable
Added: V2 devices now have powersave enabled on sd interface
Update: cleaned up code, lang defines, added manual entries
Update ssp clock mechanism added calculated ssp divider to clipzip
Update turn display clock off when clip+ turns off display
Fixed: clipzip wrong register for SSP clock
Change-Id: I04137682243be92f0f8d8bf1cfa54fbb1965559b
TODO: add other players?
This makes it possible to play the game while zoomed in. Read the
manual entry if you want to know more.
Change-Id: Iff8bab12f92ebd2798047c25d1fde7740aa543ce
Change-Id: I1ddb78bd267372617370cc36910fce9980b907cd
Calling the menu entry "Backlight Exemptions" as this better describes the functionality.
Adding the German translation.
* Changed keymaps to PLA and added to SOURCES and CATEGORIES file
* improved keymaps: implement wrap-around and key repeat
* change keymap according to screen orientation
* fix font size calculation
* use blocking button query in main loop
* replace tabs with spaces
* added manual entry
* added original author to CREDITS
Change-Id: Id67ae99cbb7a737c7f4608e278b77a389ac2ffa6
Selective backlight allows the user to choose actions that will not
enable the backlight when pressed.
Advanced softlock allows user to choose actions that will not be
blocked by screenlock on devices without a hold button.
Both only occur in FM and WPS Contexts.
Update:
Back from the dead
-Cleaned up code, removed unnecessary calls, re-arranged last filter action
timeout conditional to work in case last_filtered_action_tick was never set
-Added entries to the manual
-Fixed back button on some menus not activating backlight
-Made menus more intuitive, no actions selected now changes menu item to off.
-Added talk fuctionality.
-Added option to disable selective backlight while on external power.
-Rewrote backlight and softlock handling code to fix issue with scrollwheels
-Menu changed to have toggle(yes/no) and settings
-Optimized selective actions lookup
-Added option to disable notification of 'buttons locked' while softlocked
-Removed uneeded code, consolidated action lookup to single function
-Fixed incorrect name on selective softlock menu
-Added option to disable touch on touchscreen devices
-Fixed backlight on original screenlock without selective screenlock active
-Added text selection in mask_select for when show_icons is off
-Fixed voice in mask_select to speak if voice is defined instead of spelling
-Added more lang defines (play skip seek)
-Added option to disable unknown keys turning on backlight
-Fixed Conditional argument In wrong place causing players without
backlight to fail to build
-Fixed Disable Unknown blocking detection of context change
-Fixed canceling menu didn't update new settings
-Added Autolock on backlight off
-Removed backlight_on_force from backlight.c, Now sets ignore next to false
and uses backlight_on
-Cleaned up autolock code added strings to lang file
-Fixed issue where rapid presses would bypass softlock
-Removed old softlock code, Cleaned selective actions code
-Changed menu to match existing RB menus
-Fixed Backlight_on_Hold blocked by backlight_ignore_next
-Fixed ignore_next for ipod
-Fixed bug allowing context with softlock to bypass selective backlight
-Changed mask_select to no longer prompt for changes to be saved
-Changed menu names
-Added ignore timeout to allow ipod scroll wheel to work properly and other
players to still work properly, removed some previous code including
ignore_event
-Increased ignore timeout to prevent sd card accesses from interrupting action
code and turning on backlight
-Changed Unknown action to unmapped action in menu, changed handling code
-Removed unneeded logic and variables for handling unfiltered actions
-Reverted unmapped action code to previous functionality
-Added manual entries (thanks JohnB)
-Removed elusive unhandled unicode character from manual, changed formatting slightly
Actions:
Volume,Play,Seek,Skip
Extras:
Disable unmapped actions
Disable selective backlight on external power
Disable touch during softlock on touchscreen devices
Disable softlock notifications (power button still notifies)
Autolock on backlight off
Method:
Adds a function to ignore backlight on next call
If selected action occurs backlight is forced on,
Filter_first_keypress stays intact.
Selective softlock allows selected actions through, bypasses the normal
softlock routine.
ToDo:
DONE
previous commit (#1) has attribution for folder_select.c which mask_select
is based from.
Change-Id: I08132ddcfd64c81751ef23b720f3ec6d68695fe4
Original revision: 5123b1bf68777ffa86e651f178046b26a87cf2d9
MIT Licensed. Some games still crash and others are unplayable due to
issues with controls. Still need a "real" polygon filling algorithm.
Currently builds one plugin per puzzle (about 40 in total, around 100K
each on ARM), but can easily be made to build a single monolithic
overlay (800K or so on ARM).
The following games are at least partially broken for various reasons,
and have been disabled on this commit:
Cube: failed assertion with "Icosahedron" setting
Keen: input issues
Mines: weird stuff happens on target
Palisade: input issues
Solo: input issues, occasional crash on target
Towers: input issues
Undead: input issues
Unequal: input and drawing issues (concave polys)
Untangle: input issues
Features left to do:
- In-game help system
- Figure out the weird bugs
Change-Id: I7c69b6860ab115f973c8d76799502e9bb3d52368
3D "enhancement" is available on all imx233 platform, and also on platforms
with the WM8978 codec (gigabeats) and WM8750 codec (MPIO HD 200/300). I used
different texts for different codecs because (in theory) they do different
"things".
Change-Id: I62ecb075f7594427491b6be83cfa80f763566aba
* Implements RFC 4226 (HOTP) and RFC 6238 (TOTP)
* Adds sha1.c to apps/plugins/lib (orignally tools/hmac-sha1.c)
* See manual entry for more information
Change-Id: Ia4a4031b29f97361b541e71438aa7f3ea82212f2
The text is usually only a short description taken from the wiki and
don't contain screenshots or keymaps, but should be better than nothing. :)
Added manual entries:
- Boomshine
- Dict
- FFT
- main_menu_config
- Matrix
- Maze (including keymap)
- PDbox
- Superdom
Additional changes/fixes:
- fix "Clix" alphabetical order
- add Frotz & ZXBox to games preamble
Change-Id: I169870420cbac8123695747ccfcbaaf3478c11cc
Change 12x12 and 22x22 sized tiles to hand-optimized ones
with better readibility :)
Tile values >= 1024 are abbreviated to "1k", "2k" etc.
Change-Id: I15f4649b20442b71027a3b1564bc51c7e72105ce
This patch fixes some (mostly small) plugin issues with the "big"
YH-keymap patch (a507b). Only one fix affects the main keymaps
(virtual keyboard "DONE" now exits after long key /release/ instead
of long button /press/).
Change-Id: Id34f925ebfa97ae4974cd9405fbe1fee4f597833
The main "innovation" in this patch are two "virtual buttons"
for the record switch on YH92x targets. When the switch state
changes, a single BUTTON_REC_SW_ON or .._OFF button event will
be generated. Thus keymap code can react on switching, but
not on the actual state of the switch.
Wherever sensible, the following user scheme is applied:
- use PLAY as confirm button
- use REW button or Long REW to exit
- use REC (YH820) or FFWD (YH92X) as modifier key for button combos
Change-Id: Ic8d1db9cc6869daed8dda98990dfdf7f6fd5d5a1
* improve manual (hopefully fixes fs#11988). Parts of the
description are taken from fs#10820.
* move ACTION_STD_CONTEXT from alternate select to alternate
menu action, as not all targets have ACTION_STD_MENU
* add menu entries for "Quit" and "Quit without saving"
Change-Id: Iec86a1608756a899f9f9d7ec7d479838dfd1d95f
I copied the direction button description from snake2
manual, as both snakes seem to have the same controls.
No guarantee however :)
Change-Id: I8ca1ccf75f0737d5a922aae207c7c7efef5ec026
- square sine tick and tock sounds (more annoying, more useful;-)
- optical indication of tics on display
- unification of mode of operation for SWCODEC and HWCODEC (tested on simulator)
Both playback and display drawing happen in main loop, always.
- operating in two modes now:
-- 1. classic dumb metronome
--- active when openened as application without file to open
--- the usual functionality with tapping and bpm change
--- controls indicated on display
-- 2. track mode with programmable series of parts
--- active when started as viewer for a .tempo file
--- differing meters (4/4, 3/4, 6/8, etc.)
--- patterns (tick/tock/silence on each beat)
--- smooth tempo changes in those tracks
This version had lots of testing regarding metronome accuracy,
resulting in the realization that PLL A and PLL B differ
on the Clip+, causing drift. There is still drift when the timer
intervall is too small, so I settled on 2 ms as compromise.
This is the final version, after adding documentation and extensive
help from Sebastian Leonhardt testing it on slower hardware (YH820),
where it works up to 650 actual bpm with display indication.
Latest change: Documentation nitpicks.
Change-Id: I764c8252526db188352385c5462f9453d882beb9
perceptual bass enhancement
- a bbe-ish group delay corrction with Biophonic EQ boost.
- precut
auditory fatigue reduction
-reduce signal in frequency that may trigger temporary threshold shift
haas surround
-frequency between f(x1) and f(x2) is always bypassed.
-can apply to side only.
Change-Id: Icb6355ce9b1c99bf2c58c9385c3c411c0ae209d3
This is needed because the version in scrreprt.4ht in debian isn't compatible
with other current bits of the TeX installation.
Change-Id: Ibf31f387ecc9fdb8a6ad7b7362d5b650e657bb5b
- Comment keymaps.h
- Tie XWORLD_DEBUG into ROCKBOX_HAS_LOGF to ease debugging
- Fix up the manual a little bit
Change-Id: I12cfb58001199036cd67dbaa27f164e6790a199d
Reviewed-on: http://gerrit.rockbox.org/1084
Reviewed-by: Michael Giacomelli <giac2000@hotmail.com>
Co-conspirators: Franklin Wei, Benjamin Brown
--------------------------------------------------------------------
This work is based on:
- Fabien Sanglard's "Fabother World" based on
- Piotr Padkowski's newRaw interpreter which was based on
- Gregory Montoir's reverse engineering of
- Eric Chahi's assembly code
--------------------------------------------------------------------
Progress:
* The plugin runs pretty nicely (with sound!) on most color targets
* Keymaps for color LCD targets are complete
* The manual entry is finished
* Grayscale/monochrome support is NOT PLANNED
- the game looks horrible in grayscale! :p
--------------------------------------------------------------------
Notes:
* The original game strings were built-in to the executable, and
were copyrighted and could not be used.
* This port ships with an alternate set of strings by default, but
can load the "official" strings from a file at runtime.
--------------------------------------------------------------------
To be done (in descending order of importance):
* vertical stride compatibility <30% done>
* optimization <10% done>
Change-Id: I3155b0d97c2ac470cb8a2040f40d4139ddcebfa5
Reviewed-on: http://gerrit.rockbox.org/1077
Reviewed-by: Michael Giacomelli <giac2000@hotmail.com>
The port to for this two targets has been entirely developped by Ilia Sergachev (alias Il or xzcc). His source
can be found at https://bitbucket.org/isergachev/rockbox . The few necesary modifications for the DX90 port
was done by headwhacker form head-fi.org. Unfortunately i could not try out the final state of the DX90 port.
The port is hosted on android (without java) as standalone app. The official Firmware is required to run this port.
Ilia did modify the source files for the "android" target in the rockbox source to make the DX port work. The work I did
was to separate the code for DX50 (&DX90) from the android target.
On this Target Ilia used source from tinyalsa from AOSP. I did not touch that part of the code because I do not understand it.
What else I changed from Ilias sources besides the separation from the target "android":
* removed a dirty hack to keep backlight off
* changed value battery meter to voltage battery meter
* made all plugins compile (named target as "standalone") and added keymaps
* i added the graphics for the manual but did not do anything else for the manual yet
* minor optimizations
known bugs:
* timers are slowed donw when playback is active (tinyalsa related?)
* some minor bugs
Things to do:
* The main prolem will be how to install the app correctly. A guy called DOC2008 added a CWM (by androtab.info) to the
official firmware and Ilia made a CWM installation script and a dualboot selector (rbutils/ibassoboot, build with
ndk-build). We will have to find a way to install rockbox in a proper way without breaking any copyrights.
Maybe ADB is an option but it is not enable with OF by default. Patching the OF is probably the way to go.
* All the wiki and manual
to build:
needed: android ndk installed, android sdk installed with additional build-tools 19.1.0 installed
./tools/configure
select iBasso DX50 or iBasso DX90
make -j apk
the content of rockbox.zip/.rockbox needs to be copied to /system/rockbox/app_rockbox/rockbox/ (rockbox app not needed)
the content of libs/armeabi to /system/rockbox/lib/ (rockbox app needed)
The boot selector is needed as /system/bin/MangoPlayer and the iBasso app as /system/bin/MangoPlayer_original. There
is also the "vold" file. The one from OF does not work with DX50 rockbox (DX90 works!?), the one from Ilia is necessary.
Until we have found a proper way to install it, it can only be installed following the instructions of Ilia on his
bitbucket page, using the CWM-OF and his installation script package.
Change-Id: Ic4faaf84824c162aabcc08e492cee6e0068719d0
Reviewed-on: http://gerrit.rockbox.org/941
Tested: Chiwen Chang <rock1104.tw@yahoo.com.tw>
Reviewed-by: Michael Giacomelli <giac2000@hotmail.com>
- original rockbox port: Yifu Huang
- original work: Jonathan Bettencourt
- modifications made:
- PLA-fied
- Add element 117 (ununseptium)
- Implemented up/down
- Fixed actinide/lanthanide navigation so that they are between scandium and titanium
- Added manual entry
- Fixed FG/BG colors
Change-Id: Ibabfb0d28f794689ffcd8b9c360fb969d118de08
Reviewed-on: http://gerrit.rockbox.org/950
Reviewed-by: Michael Giacomelli <giac2000@hotmail.com>
Added to config_file_options.tex, sections for gigbeat and fuze+
sensitivity settings, also fuze+ touchpad deadzone setting.
Change-Id: I9bba52ca0ca5525e6a6fb337f6940d11571ee06a
Reviewed-on: http://gerrit.rockbox.org/954
Tested: Benjamin Brown <foolshperson@gmail.com>
Reviewed-by: Frank Gevaerts <frank@gevaerts.be>
The "Save Current Playlist" isnt part of the playlist viewer settings. While
at this section also add a reference to the extra playlist chapter.
Change-Id: I68e494430dc00c6172859b0b8d9edbe5b0116741
Add a "volume limit" parameter to the configuration file. The maximum
value of volume setting in sound menu will be limited to the same as
volume limit. Also each time when setvol() is excuted, Rockbox will
check if the global_settings.volume value larger than
global_settings.volume_limit. If larger, take the value of volume_limit
instead. The volume_limit argument shares the same maximum and minimum values
with volume argument, while taking the maximum volume as its default value.
Change-Id: I8ca9bc6ea6e617b48fc346aae5f2a0a1d259ae36
Reviewed-on: http://gerrit.rockbox.org/697
Reviewed-by: Jonathan Gordon <rockbox@jdgordon.info>
This is an improvement to the current compressor which I have added
to my own Sansa Fuze V2 build. I am submitting here in case others
find it interesting.
Features added to the existing compressor:
Attack, Look-ahead, Sidechain Filtering.
Exponential attack and release characteristic response.
Benefits from adding missing features:
Attack:
Preserve perceived "brightness" of tone by letting onset transients
come through at a higher level than the rest of the compressed program
material.
Look-ahead:
With Attack comes clipping on the leading several cycles of a transient
onset. With look-ahead function, this can be pre-emptively mitigated with
a slower gain change (less distortion). Look-ahead limiting is implemented
to prevent clipping while keeping gain change ramp to an interval near 3ms
instead of instant attack.
The existing compressor implementation distorts the leading edge of a
transient by causing instant gain change, resulting in log() distortion.
This sounds "woofy" to me.
Exponential Attack/Release:
eMore natural sounding. On attack, this is a true straight line of 10dB per
attack interval. Release is a little different, however, sounds natural as
an analog compressor.
Sidechain Filtering:
Mild high-pass filter reduces response to low frequency onsets. For example,
a hard kick drum is less likely to make the whole of the program material
appear to fade in and out. Combined with a moderate attack time, such a
transient will ride through with minimal audible artifact.
Overall these changes make dynamic music sound more "open", more natural. The
goal of a compressor is to make dyanamic music sound louder without necessarily
sounding as though it has been compressed. I believe these changes come closer to this goal.
Enjoy. If not, I am enjoying it
Change-Id: I664eace546c364b815b4dc9ed4a72849231a0eb2
Reviewed-on: http://gerrit.rockbox.org/626
Tested: Purling Nayuki <cyq.yzfl@gmail.com>
Reviewed-by: Michael Giacomelli <giac2000@hotmail.com>
New section Touchpad added to the manual. Gigabeatfx and
SansaFuze+ entries added for touchpad sensitivity setting.
Change-Id: I0c5a173d6ad479c4e6995cf5045d90da6cc216ab
Reviewed-on: http://gerrit.rockbox.org/689
Reviewed-by: Benjamin Brown <foolshperson@gmail.com>
Tested: Benjamin Brown <foolshperson@gmail.com>
Reviewed-by: Michael Giacomelli <giac2000@hotmail.com>
Last core update for keymaps and manual. Manual is now 100% complete
Change-Id: I9ad33206ecea41a88cba7a355da911fa7ab0455d
Reviewed-on: http://gerrit.rockbox.org/521
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
1) Now that recording is working a few keymaps update are required.
2) also implement the radio.c file so that fm dedicated keymaps
works.
3) implement some missing fm keymaps
4) manual updated accordingly
Change-Id: I40be3e245853ccb9ed7a5bc5a76fe4ed90772272
Reviewed-on: http://gerrit.rockbox.org/513
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
After the recent soft lock implementation for FM, this adds the
related information in the manual for Fuze+ and Clip/clip+ (basicaly it's a
copy/paste from WPS section).
Change-Id: I23c39d7b3763eb2b9897187baa3a9b2663003cf7
Reviewed-on: http://gerrit.rockbox.org/495
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
thanks to pixelma for having pointed this out and
correcting the first patch
Change-Id: I79f6264a5290906b0d7abd1703df79fde104cb4a
Reviewed-on: http://gerrit.rockbox.org/405
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
thanks to pixelma for having pointed this out
Change-Id: Iac8b997f42b8fb0f964f1f40ce1d2e7e286d4c04
Reviewed-on: http://gerrit.rockbox.org/404
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
1) slight keymaps update
Remove mapping of BUTTON_BACK reseting game to avoid pressing it
involuntary.
Direct mapping of BUTTON_POWER to go into menu.
2) manual updated
Change-Id: I28875104c4a4058216532b9aa12bb2defabcca6d
Reviewed-on: http://gerrit.rockbox.org/352
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
Use %x9(id) to draw an image in the whole current viewport using the
9 segment drawer (which draws the corners as normal and *tiles*
the middle segments to the needed width/height).
Future work is to make it scale instead of tile
Change-Id: Ic3ed1cad93f96091694801eb442e0da5a2401203
Update %?pv description to better describe the
conditions it returns
Change-Id: I6be4d5293aa6816ae35d743b172fe324d7dc6d12
Reviewed-on: http://gerrit.rockbox.org/367
Reviewed-by: Jonathan Gordon <rockbox@jdgordon.info>
Missing screenshots:
Invadrox, which I can't find in the menu, but on IRC they said it's
for LCD only, so it should be removed.
Pacbox, Rockboy and Zxbox: it's unclear where to find the ROMs.
Poor quality image:
manual/rockbox_interface/images/sansaclipzip-front.png. It can work,
but my “artistic” skills are not enough. Anyway, the information on
the picture is correct.
All the screenshots were taken using the default theme and the
simulator compiled for the Sansa Clip Zip.
Change-Id: I779a3b8fbf9a1ab2f12b8f8e6bcf55f2363900ce
Reviewed-on: http://gerrit.rockbox.org/357
Reviewed-by: Bertrik Sikken <bertrik@sikken.nl>
Reviewed-by: Alex Parker <rockbox@aeparker.com>
Tested-by: Alex Parker <rockbox@aeparker.com>
Makes FM radio keys consistent with the updated Clip keymap in the rest of rockbox. Home now goes to the main menu, power stops the radio, and several other keys are a little more obvious.
Change-Id: Iaab207acf936820d5602ae1ce4ffbbe30bf7877e
skin bars now automatically create the touch region the same size
as the bar on touchscreen targets. This means touches will
magically "just work" for reveresed bars (rtl or otherwise).
~5% padding is added on all 4 sides of the region rectangle but
this may need to be tweaked.
Please consider the 'progressbar' and 'volume' touchregion actions
to be deprecated.
Kudos to my new wife for figuring out the bleedingly obvious way to
do this!
Change-Id: I997a7bcaa70fce9885808aae27953c7676e9c2ff
Pipe the output of LaTeX through a Perl script and filter out information that
is irrelevant in deciding if building the manual actually worked. Format errors
in a similar way to gcc output to allow existing scripts catching it.
Enabling verbose output during the make run will not remove parts of the output
but only do some reflowing. The full log is always available in the manual
subfolder.
Change-Id: I15d35b4d3c73fafe2a4357168ca8ada51355f221
Reviewed-on: http://gerrit.rockbox.org/247
Reviewed-by: Dominik Riebeling <Dominik.Riebeling@gmail.com>
Tested-by: Dominik Riebeling <Dominik.Riebeling@gmail.com>
Commit bb24ac8c27 replaced the
\opt{iaudiom3,iriverh100} with \opt{remote} which isn't true in the
Iaudio M3 case as this feature is dependent on HAVE_REMOTE_LCD and
the M3 uses this screen as main lcd so doesn't define it. Use the manual
HAVEREMOTEKEYMAP for now as I didn't find a suitable other define yet.
Change-Id: I58b2abd2f7cae1a821cea297a2b4c002a3420493
Make this info available for all bitmap targets, also ones that only need it
in the pictureflow description. Shuffle some lines around so that it doesn't
need too many opts. Fixes FS#11350.
Change-Id: I5268483c7a1d765c8a994614442309b05de1d832
Create symlinks to the iaudiom3 graphics to not duplicate the picture itself
and to not lose the precise 'addressing' of the picture. Change the manual's
makefile to follow symlinks for this to work (thanks to Dominik and Jens for
the help there).
Change-Id: I5882880cb22cbf5561cb0872d7889b7c8c42b62e
