I think this covers everything now, although some fields are missing
enum values. Those can be added in if and when they are needed.
Change-Id: Ib1a94ba9c9a5949b6a038f8c1a49786823fae58f
Allows the ACTION_YESNO_ACCEPT action to be set
to a button release by ignoring certain system events.
Moving USB init in main.c to the last thing to prevent
getting stuck in the USB prompt, if enabled.
Also changing ACTION_YESNO_ACCEPT to button release on erosq
Change-Id: I5e7498521a13cb4e840223dd0b9c8633e99093bc
All this tested on erosq, I'm not sure if this will break on other targets or if there is a reason this shouldn't be done.
apps/menu.c:
Added CONTEXT_MAINMENU|ALLOW_SOFTLOCK in do_menu(), this allows the user to lock the keys in most places within the main menu tree.
apps/tree.c:
Added CONTEXT_TREE|ALLOW_SOFTLOCK in dirbrowse(), this allows locking the keys in most other contexts not covered by the above.
Notable exceptions I've found that still cannot be locked: View Playlist, any settings change screen (ex. Shuffle No/Yes, Volume Select dB)
Adding fix for Advanced Key Lock feature brought to light by this change in apps/action.c.
Expected behavior for Advanced keylock is now (according to my testing here):
Volume: Can be exempted from keylock anywhere
Skip/Scrollwheel: Can only be exempted in WPS
Seek: Can only be exempted in WPS
Play: Can only be exempted in WPS
Backlight exemption is same except the Volume exemption doesn't work outside the WPS, but I don't believe that is due to this change.
Change-Id: Ifa3d1a03cf4884520a37dd91ed53a825cdb66778
- Add support for skip and seek while the player is locked.
(Thanks to @bahus for the suggestion)
- Fix touch zones because the down button zone ended up being
a lot smaller than expected due to the touchpad's wonkiness.
Also added a visual display of the touchpad to its debug menu.
- Fixes the pictureflow keymap because it was mostly unusable.
Change-Id: Ic0da4f8df3613ff7828ce1cb940ed9e77ada3281
To enable support targets must define HAVE_LOCKED_ACTIONS and then
handle the CONTEXT_LOCKED flag from get_context_mapping().
Change-Id: I92703b534e4a45b4ebbf9bf98af42df9b8ac3b1a
Clearing recoverzap parameter exists the Recovery Mode. This makes it
possible to run Rockbox on Sansa Connect without relying on original
Linux firmware.
Enable write-through cache on flash memory as write-back complicates
handling without any real benefits. The flash memory accepts commands
as series of writes at predefined addresses, so it is important that
the cache does not interfere with the writes.
Change-Id: I219f962f20953d84df43012cf16bbb16d673add8
rather than dumping all the settings allow a filter function
to choose desired settings
in menucoresettings you can see an how to do exact text matches
or wilcard matches you can even use luas version of regex
Change-Id: I4c7f7592498ea194e06e9a556b77ffd57f5d4223
return the nextfunction and nil instead of pairs it allows a faster
return to lua rather than calling the lua function
pcall(fnpairs) from c and returning the result back
into lua to kick off the search
yeah, no clue why I didn't realize that before..
testing in x86 and ARM..
its more RAM efficient to do the initial creation
of the stack in lua code for the __pairs functon
its not faster but being that its a one time hit per
iter creation the reduced churn alone should be worth it
along with a reduced peak RAM usage
fix bug where a failed module can not be reloaded
optimize filetol
fix potential bug in splash scroller when no break character is found
Change-Id: I42c922e07039a19138b97c0d0e80cf3cf2426471
Motivation: turns out the DMA in the M3K's MSC controller is buggy,
and can't handle unaligned addresses properly despite the HW docs
claiming otherwise.
Extending the FAT driver bounce buffering code is the easiest way
to work around the problem (but probably not the most efficient).
Change-Id: I1b59b0eb4bbc881d317ff10c64ecadb1f9041236
Also bump max battery capacity to 7300mAh, to accomodate
oversized aftermarket units that require case mods.
Change-Id: I743e550b0c0843ab17529e70b5d592ea0e9a79d8
Settings code tries to cast the bool pointer to an int pointer
and then write through it, which makes AddressSanitizer whine.
Change-Id: I1d6162fc98144cd6b40444016b3b48ef02967324
- Move WPS Stop to Power (Hold)
- Add WPS Hotkey to Wheel scroll Fwd/Back
- Add WPS Quickscreen to Play (Hold)
- Add Tree Hotkey to Play (Hold)
Change-Id: Id74622138353521f736c0de1009a354307b108eb
SPL and UCL-compressed bootloader are now packed into one output,
bootloader.m3k, eliminating the separate SPL build phase.
The Rockbox bootloader now has a recovery menu, accessible by
holding VOL+ when booting, that lets you back up, restore, and
update the bootloader from the device.
Change-Id: I642c6e5fb83587a013ab2fbfd1adab439561ced2
This is an MIT-licensed library for reading and writing v7 format
tar files. The version here is my fork, which fixes security issues
in the original code (it hasn't been updated in 4 years, probably
abandoned by the author).
Change-Id: I86d41423dacc46e9fa0514b4fc7386a96c216e86
- Removed unnecessary layers of generic code
- Software ECC is gone since we don't need it now (and maybe not ever)
- Removed bounce buffering, so callers must now align buffers
Change-Id: I33fbac9d9d12a4657980b8618c7d62bfa91e2ea0
temp loader allows some lua requires to be loaded and
later garbage collected unfortunately the module needs to be formatted
in such a way to pass back a call table in order to keep the functions
within from being garbage collected too early
BE AWARE this bypasses the module loader which would allow code reuse
so if you aren't careful this memory saving tool could spell disaster
for free RAM if you load the same code multiple times
Change-Id: I0b6f81e481b8c779edbd620c8403794f8353926f
bring custom keyboard layouts to lua
conversion to the proper format requires create_kbd_layout.lua
just pass a lua string with your desired layout
Change-Id: I14a392410846311a4f3cf8dda0e88d39834d0418
Works from any playlist saving operation accessed from the
While Playing Screen, all other playlist saving operations
are unchanged.
Now a user-selectable setting! Located in
General Settings -> Playlists -> Current Playlist ->
Reload After Saving (Yes/No)
Change-Id: I5085c3f4c56c518a812d5ee015d15cc4dca19a28
'Bugfix' mono_bitmap_part reads ahead in the buffer,
if the height is <= char bit pixels other memory gets read
found with [Address Sanitizer]
also g#3332 since this is clearly a problem across the code
instead place the check for height < 8 in the lcd_mono_bitmap_part function
Change-Id: I917cbbd568fd5474b76a98c8919467e2538e0f0c
updated example script and renamed some functions as well
fixed bug in printtable cursor position if greater than maxlines for the
screen would reset to item 1
now we move the list start and select it
(and try to center it on the screen)
fixed a few bugs in the add_menu code
Change-Id: I01dead0481ef2e925af8b4cc6c14e36c2859dbba
This overwrote the first 2 instructions of crt0 in the bootloader!
I'm really not sure how this *didn't* cause a fatal exception.
This address isn't special as far as I know, so just move it to the
TCSM by making it a static variable.
Change-Id: I58e1486804aeb2b68325e8de2aa1874c97abef19
allows menus + submenus + context menus all with simple tables
menu_t which is a table of strings
func_t which are the corresponding functions to go with those strings
see lua_scripts/submenu_demo.lua
Change-Id: I907b74b4abef0ecbe49f181d0ced6e6d20e94de5
The abiflags data is only used to communicate ABI information to a
program loader -- you can see what info is stored with readelf -A.
Dropping it shaves 24 bytes off of every binary (including plugins).
Change-Id: Iae78eeffe5c840ff67717707fb94821d24aac8ec
It never worked, and hasn't compiled in something like a decade, Given
the HW capabilities (limited onboard flash, no expandability) there's
really no point in trying to fix/complete it.
Change-Id: I7d175089840396f8891645bd10010d730dd5bfdc
They were never finished, never saw any release ever, and haven't
compiled for the better part of a decade. Given their HW capabilities [1],
they are not worth trying to fix.
[1] 1-2MB RAM, ~256MB onboard flash, no expandability
Change-Id: I7b2a5806d687114c22156bb0458d4a10a9734190
There's absolutely no way for gpio_config() to get called from two
different threads due to the co-operative threading model, and it
is unsafe to call from IRQ context no matter what we do.
Change-Id: I58f7d1f68c7a414610bb020e26b774cb1015a3b0
Using a macro to put each function in its own .icode-based section
allows us to put the functions in IRAM _and_ have linker GC. This
removes a troublesome #ifdef BOOTLOADER_SPL on the X1000 target.
Change-Id: Ia7b59778f5c36b7970dee4280547e434a1f4fc5a
This menu serves no useful purpose anymore. I plan on adding an
improved version of this functionality to the bootloader instead.
Change-Id: I6a93625789f7192031eb6cee6708f9a867318622
