Port USB driver from Sansa Connect Linux kernel sources. The device
successfully enumerates and responds to SCSI commands but actual disk
access does not work. The SCSI response sent to host mentions that both
internal storage and microsd card are not present.
Change-Id: Ic6c07da12382c15c0b069f23a75f7df9765b7525
Modify count, buffer and start address only after successful transfer.
This makes the retry operation to use the same address and buffer as the
just failed transfer.
Change-Id: I4f49bbdc861d634e33ea5e939a9693474411d24d
But for stage1 (and non-hosted targets) we can stick with -std=gnu++03.
This keeps everyone happy with no apparent regerssions on older
host compilers.
Change-Id: I1300574557bc8d4d13e5cf07d4ae85645998f071
Add --with-sysroot= to the configure args of glib and dbus because
otherwise they get confused and try to use host system dependencies.
Also fix the broken restart logic so you can actually restart a build.
Change-Id: Ib456c04845d80cc923dcc6b83e57f67a0868104b
Basically it defaults to using C++17, which breaks the GCC compilation.
Instead, explicitly specify -std=c++03, which should work everywhere.
Change-Id: I821591dbbac4fab4b1d930702ed66c7c767b5c92
Add a check to see if the keys are currently locked and allow
them to be unlocked to ensure we don't get stuck when the current
playlist ends while the WPS is locked.
(Original by Aidan MacDonald)
Adding initialization for unlock_combo and to arm the autolock
(if enabled) without the user needing to press the lock button
at least once every boot (which is the prior behavior).
Removing screen_has_lock check from is_keys_locked()
Change-Id: I0fbf9b9746b011a7086ec8505a7ecc4b84f2d332
- Use unsigned bitfields in 'lcd_tgt_config'
- Set DTIMES when using an 8-bit bus width
- Allow using DMA big-endian mode
- Provide an #ifdef to avoid stopping DMA in the middle of a frame
- Correctly #ifdef LCD sleep code when target does not implement it
Change-Id: I327c6b05223638b876d5ab62cb6e48f82e6d5fa5
- Change busy loop to wait on the timer flag instead of hoping to
catch the timer at exactly the right moment... unsurprisingly,
that did not work well with higher frequency PWM outputs.
- Put GPIO data into a dedicated const array.
Change-Id: I2a920ed265c192da197a18c7242f3205d11636d3
The old name was a bit misleading. AXP173 is sort of the lowest common
denominator of a series of related chips. The M3K uses an AXP192 which
has a few extra features vs. the AXP173.
New voltage regulator stuff was added for the sake of the Shanling Q1
native port (that player also uses an AXP192).
Change-Id: Id0c162c23094bb03d13fae2d6c332e3047968d6e
- Drop obsolete NAND patch script (it's simpler to use 'dd' directly)
- Remove an outdated comment
- Fix missing 'void' in a function definition
- Reset the poweroff timer when we poke the backlight
Change-Id: I752624386f30ac95f41a731d2b6be837e12275a9
Some audiohw API calls are shared between playback and recording,
eg. frequency settings. Implementing these in the DAC driver won't
work for the M3K, as it uses a separate codec for microphone input.
Change-Id: Ieb0a267f8a81b9e2bbf0bbca951c5778f8dcd203
I think this covers everything now, although some fields are missing
enum values. Those can be added in if and when they are needed.
Change-Id: Ib1a94ba9c9a5949b6a038f8c1a49786823fae58f
Allows the ACTION_YESNO_ACCEPT action to be set
to a button release by ignoring certain system events.
Moving USB init in main.c to the last thing to prevent
getting stuck in the USB prompt, if enabled.
Also changing ACTION_YESNO_ACCEPT to button release on erosq
Change-Id: I5e7498521a13cb4e840223dd0b9c8633e99093bc
All this tested on erosq, I'm not sure if this will break on other targets or if there is a reason this shouldn't be done.
apps/menu.c:
Added CONTEXT_MAINMENU|ALLOW_SOFTLOCK in do_menu(), this allows the user to lock the keys in most places within the main menu tree.
apps/tree.c:
Added CONTEXT_TREE|ALLOW_SOFTLOCK in dirbrowse(), this allows locking the keys in most other contexts not covered by the above.
Notable exceptions I've found that still cannot be locked: View Playlist, any settings change screen (ex. Shuffle No/Yes, Volume Select dB)
Adding fix for Advanced Key Lock feature brought to light by this change in apps/action.c.
Expected behavior for Advanced keylock is now (according to my testing here):
Volume: Can be exempted from keylock anywhere
Skip/Scrollwheel: Can only be exempted in WPS
Seek: Can only be exempted in WPS
Play: Can only be exempted in WPS
Backlight exemption is same except the Volume exemption doesn't work outside the WPS, but I don't believe that is due to this change.
Change-Id: Ifa3d1a03cf4884520a37dd91ed53a825cdb66778
- Add support for skip and seek while the player is locked.
(Thanks to @bahus for the suggestion)
- Fix touch zones because the down button zone ended up being
a lot smaller than expected due to the touchpad's wonkiness.
Also added a visual display of the touchpad to its debug menu.
- Fixes the pictureflow keymap because it was mostly unusable.
Change-Id: Ic0da4f8df3613ff7828ce1cb940ed9e77ada3281
To enable support targets must define HAVE_LOCKED_ACTIONS and then
handle the CONTEXT_LOCKED flag from get_context_mapping().
Change-Id: I92703b534e4a45b4ebbf9bf98af42df9b8ac3b1a
Clearing recoverzap parameter exists the Recovery Mode. This makes it
possible to run Rockbox on Sansa Connect without relying on original
Linux firmware.
Enable write-through cache on flash memory as write-back complicates
handling without any real benefits. The flash memory accepts commands
as series of writes at predefined addresses, so it is important that
the cache does not interfere with the writes.
Change-Id: I219f962f20953d84df43012cf16bbb16d673add8
rather than dumping all the settings allow a filter function
to choose desired settings
in menucoresettings you can see an how to do exact text matches
or wilcard matches you can even use luas version of regex
Change-Id: I4c7f7592498ea194e06e9a556b77ffd57f5d4223
return the nextfunction and nil instead of pairs it allows a faster
return to lua rather than calling the lua function
pcall(fnpairs) from c and returning the result back
into lua to kick off the search
yeah, no clue why I didn't realize that before..
testing in x86 and ARM..
its more RAM efficient to do the initial creation
of the stack in lua code for the __pairs functon
its not faster but being that its a one time hit per
iter creation the reduced churn alone should be worth it
along with a reduced peak RAM usage
fix bug where a failed module can not be reloaded
optimize filetol
fix potential bug in splash scroller when no break character is found
Change-Id: I42c922e07039a19138b97c0d0e80cf3cf2426471
Motivation: turns out the DMA in the M3K's MSC controller is buggy,
and can't handle unaligned addresses properly despite the HW docs
claiming otherwise.
Extending the FAT driver bounce buffering code is the easiest way
to work around the problem (but probably not the most efficient).
Change-Id: I1b59b0eb4bbc881d317ff10c64ecadb1f9041236
Also bump max battery capacity to 7300mAh, to accomodate
oversized aftermarket units that require case mods.
Change-Id: I743e550b0c0843ab17529e70b5d592ea0e9a79d8
Settings code tries to cast the bool pointer to an int pointer
and then write through it, which makes AddressSanitizer whine.
Change-Id: I1d6162fc98144cd6b40444016b3b48ef02967324
- Move WPS Stop to Power (Hold)
- Add WPS Hotkey to Wheel scroll Fwd/Back
- Add WPS Quickscreen to Play (Hold)
- Add Tree Hotkey to Play (Hold)
Change-Id: Id74622138353521f736c0de1009a354307b108eb
SPL and UCL-compressed bootloader are now packed into one output,
bootloader.m3k, eliminating the separate SPL build phase.
The Rockbox bootloader now has a recovery menu, accessible by
holding VOL+ when booting, that lets you back up, restore, and
update the bootloader from the device.
Change-Id: I642c6e5fb83587a013ab2fbfd1adab439561ced2
This is an MIT-licensed library for reading and writing v7 format
tar files. The version here is my fork, which fixes security issues
in the original code (it hasn't been updated in 4 years, probably
abandoned by the author).
Change-Id: I86d41423dacc46e9fa0514b4fc7386a96c216e86
- Removed unnecessary layers of generic code
- Software ECC is gone since we don't need it now (and maybe not ever)
- Removed bounce buffering, so callers must now align buffers
Change-Id: I33fbac9d9d12a4657980b8618c7d62bfa91e2ea0
temp loader allows some lua requires to be loaded and
later garbage collected unfortunately the module needs to be formatted
in such a way to pass back a call table in order to keep the functions
within from being garbage collected too early
BE AWARE this bypasses the module loader which would allow code reuse
so if you aren't careful this memory saving tool could spell disaster
for free RAM if you load the same code multiple times
Change-Id: I0b6f81e481b8c779edbd620c8403794f8353926f
bring custom keyboard layouts to lua
conversion to the proper format requires create_kbd_layout.lua
just pass a lua string with your desired layout
Change-Id: I14a392410846311a4f3cf8dda0e88d39834d0418
Works from any playlist saving operation accessed from the
While Playing Screen, all other playlist saving operations
are unchanged.
Now a user-selectable setting! Located in
General Settings -> Playlists -> Current Playlist ->
Reload After Saving (Yes/No)
Change-Id: I5085c3f4c56c518a812d5ee015d15cc4dca19a28
'Bugfix' mono_bitmap_part reads ahead in the buffer,
if the height is <= char bit pixels other memory gets read
found with [Address Sanitizer]
also g#3332 since this is clearly a problem across the code
instead place the check for height < 8 in the lcd_mono_bitmap_part function
Change-Id: I917cbbd568fd5474b76a98c8919467e2538e0f0c
updated example script and renamed some functions as well
fixed bug in printtable cursor position if greater than maxlines for the
screen would reset to item 1
now we move the list start and select it
(and try to center it on the screen)
fixed a few bugs in the add_menu code
Change-Id: I01dead0481ef2e925af8b4cc6c14e36c2859dbba
