* configure display for RGB (instead of BGR) colour coding
* fix logo bitmap to correct size of 96x30
* fix pixel format to RGB565 swapped
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30859 a1c6a512-1295-4272-9138-f99709370657
- now identity map dram uncached and have a cached and buffered virtual alias
- rework dma to handle virtual to physical pointers conversion
- fix lcd frame pointer
- implement usb detection properly
- implement bootloader usb properly
- allow the bootloader to disable MMC windowing (useful for recovery)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30432 a1c6a512-1295-4272-9138-f99709370657
The previous maximum (20) still causes excessive heat for some people, and measurements (using a digital camera and a white screen) show that the maximum brightness in the OF corresponds to 12 in rockbox, so we use 12 now.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30227 a1c6a512-1295-4272-9138-f99709370657
Also set up a callback for the battery capacity setting (for all players) so changes take effect without having to reboot.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30170 a1c6a512-1295-4272-9138-f99709370657
Listen to headphone plug events. There are currently two glitches with this:
- Android takes a while until it reports the unplug event, so there will be
some delay until playback gets paused. This is an Android limitation.
- Rockbox debounces headphone state changes for one second. Therefore playback
will shortly be routed to the speaker on unplug until Rockbox does the actual
pause.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29956 a1c6a512-1295-4272-9138-f99709370657
More information: www.openpandora.org
Possible things to implement:
- Special button mappings
- Battery monitoring
- ALSA audio backend
- Automate creation of "pnd" (=binary) file
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29451 a1c6a512-1295-4272-9138-f99709370657
Use own plugins/SOURCES and plugins/SUBDIRS file to avoid
ifdef hell for disabled plugins without a keymap.
This finally brings the credits screen to RaaA.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29392 a1c6a512-1295-4272-9138-f99709370657
Adds Nokia N900, N810 and N800 support.
Features:
- Introduce maemo specific platform defines
- Play audio in silent mode
- Stop playback on incoming calls
- Battery level readout
- Bluetooth headset support
- Save CPU by disabling screen updates if the display
is off or the app doesn't have input focus
- N900: GStreamer audio backend
Kudos to kugel for the code review.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29248 a1c6a512-1295-4272-9138-f99709370657
Major known issues:
- No bootloader yet
- No support for the first-generation 160GB CE-ATA hard disk drive yet
- Audio playback is slow, only FLAC seems to reach realtime
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28953 a1c6a512-1295-4272-9138-f99709370657
* Remove wrong comment in config
* Add a note to the LCD driver stating that it isn't complete and thus non-working atm
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28558 a1c6a512-1295-4272-9138-f99709370657
Remove the hardcoded (and way too small) scroll threshold (the distance moved in pixels before we think the users wants to scroll) and replace it with something based on the actual DPI of the screen.
On Android we call the API for that, on other touchscreens we reimplemented Android's formula (as of 2.2) and calculate it.
Flyspray: 11727
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28548 a1c6a512-1295-4272-9138-f99709370657
FCLK is unused because we use fastbus clocking: CPU clock = PCLK
Base PCLK off PLLA and use the lowest frqeuency for FCLK (24MHz source,
maximum divider)
Save a bit of power, adjust Clipv1/e200v2/Fuzev1 current usage accordingly
Note: the power saving (in mA) is a bit less on e200v2/Fuzev1 than on Clipv1
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28000 a1c6a512-1295-4272-9138-f99709370657
AMS*: define CURRENT_MAX_CHG to give more correct estimation of recharge time
The amount of current each target draws from the charger is defined in
powermgmt-target.h
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27994 a1c6a512-1295-4272-9138-f99709370657
Since memory on 32mb ipod videos is mapped twice, a 64mb build still has codecs and plugins mapped in a usable area. This means that all that needs to be done to support 32mb and 64mb boards with the same build is to adjust audiobufend to avoid using more than the actually present RAM.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27960 a1c6a512-1295-4272-9138-f99709370657
* Forward Java KeyEvents to C layer and translate them to Rockbox BUTTON_*.
* Add a basic Android keymap
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27832 a1c6a512-1295-4272-9138-f99709370657
this greatly reduces CPU load. lcd_update_rect shoves a bit as well.
CPU usage with Rockbox in background is between 3% (with a 200kbps vbr mp3) and 12% (320kbps cbr mp3), so it's low but still dependent on codecs and even particular files.
Driving a WPS with peakmeter, e.g. the builtin one, adds about 30% cpu usage.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27689 a1c6a512-1295-4272-9138-f99709370657
General state is: Rockbox is usable (plays music, saves configuration, touchscreen works too).
Problems:
- Playing music in the background (i.e. when switching to another app) doesn't work reliably, but I'm working on that now.
- no cabbiev2 (only some preliminary files for it), no other default theme.
- screen flickers sometimes if the updates are too frequent
- no multi screen apk/package
- strange behavior when a phone call comes in
The java files (and the eclipse project) resides in android/, which is also supposed to be the build folder.
I've put a small README in there for instructions. There are some steps needed after the make part, which are described there,
and which eclipse mostly handles. But there ought to be some script/makefile rules which do that instead in the future.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27668 a1c6a512-1295-4272-9138-f99709370657
It still works mostly like the simulator. There's also some minor left overs from the sim, but it does not define SIMULATOR.
It installs into the current (build) dir, and you need to run it with '--root .' (because it looks for ./.rockbox and not ./simdisk/rockbox) as options. That's one of the few kludges left that should be resolved soon'ish.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27310 a1c6a512-1295-4272-9138-f99709370657
The simulator defines PLATFORM_HOSTED, as RaaA will do (RaaA will not define SIMULATOR).
The new define is to (de-)select code to compile on hosted platforms generally.
Should be no functional change to targets or the simulator.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27019 a1c6a512-1295-4272-9138-f99709370657
Gets a bit more battery life
Adjust current usage, it was a bit too low for Clipv2/Clip+
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26866 a1c6a512-1295-4272-9138-f99709370657
This adds proper full speed charging support for iPod 4G, Color, Mini 1G, Mini 2G, Nano 1G, and Video. Nano 2G already has support, so now all ipods charge (except 1G-3G whose hardware doesn't support USB charging).
USB charging defaults to on, but will only charge at full speed from a USB host. To charge from an AC charger, you need to set the USB charging mode to "force". It may be possible to detect AC chargers in a future version, at least on some models.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26626 a1c6a512-1295-4272-9138-f99709370657
1) "Charge during USB connection" option is now tristate: off/on/force. Currently "force" behaves just like "on", but in future it will allow charging even when it was not possible to positively identify a charger.
2) The H300 code has been adjusted to use the new system but there should be no functional differences, it already had the USB charging option and its USB/charging support is hardware controlled.
3) The Gigabeat S code has been adjusted to use the new system: the player now has the USB charging option, which wasn't previously available. The player will only charge at full speed when allowed to do so by a working USB host, so USB AC adapters won't work very well; however, they didn't work before either, so this is not a change in functionality.
4) The iPod Nano 2G code has been adjusted to use the new system: it already had the USB charging option. Using a USB AC adapter won't charge at full speed any more (it did before) - the old implementation was equivalent to the not-yet-implemented "force" option in the new system.
No other target should be affected. Support for the "force" mode and support for at least some other iPod models will come in a future commit :)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26570 a1c6a512-1295-4272-9138-f99709370657
A specific poweroff function needs to be used for wake-up to work
Disable RTC in bootloaders for consistency with other Sansas
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26243 a1c6a512-1295-4272-9138-f99709370657
Bring Clipv1 & m200v4 plugin buffer down to this limit
zxbox, chessbox and rockboy build on the clip
rockboy doesn't build on m200v4 due to not enough buttons to make a keymap
Some gameboy roms won't run on Clipv1: tetris does but not pokemon for example
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26144 a1c6a512-1295-4272-9138-f99709370657
build it on fuzev2 and clipv2 too, it should be the same controller
as3525v1 file is only build for CONFIG_USBOTG == USBOTG_AS3525, no need
to check for it in the .c file
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26142 a1c6a512-1295-4272-9138-f99709370657
- only enable overlays for targets with very small plugin buffer (<=
0x10000 bytes, i.e. archos)
- change the condition for rockboy to reflect exactly why it can be
built or not
- Some plugins need a large plugin buffer, only enable them if the
buffer is big enough (sizes measured on Clipv1)
- disable MIDI if we have 2MB (or less), we won't be able to load the
instruments in the audio buffer
- remove unusable lua overlay loader
- sokoban code is bigger on clipv1 than on SH, assume it code is 20kB on
anything but SH so it builds with buffer smaller than 192kB
- reduce the Clipv1 plugin buffer size from 288kB to 96kb, disabling
zxbox, chessbox, and fft
zxbox and chessbox have overlays which run on archos, we just need to
enable them on other targets. We'll also be able to run rockboy.
fft won't run as it needs a large plugin buffer for greylib
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26141 a1c6a512-1295-4272-9138-f99709370657
To be sure that there is no mistake in this code, it is run *after*
the known to work HOME & LEFT buttons checks, unlike other Sansas
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26122 a1c6a512-1295-4272-9138-f99709370657
- Enable end of charge monitoring once, it doesn't need to be disabled
- Acknowledge the first (wrong) end of charge interrupt on charger enable
(this had been broken in r25299)
- Centralize reads to ENRD* registers and cache the results when needed
- on PP it is not needed because reads are atomic, we only check for
end of charge when the charging, and for charger presence when
discharging
as3525v2 (using as3543) specifics
- I got the datasheet today from AMS, thanks to them for being so fast
and not require me to sign tons of papers!
- USB detection now works on as3525v2 using the as3543. Clip+ won't
reboot to OF yet, it needs mkamsboot support first (usbstack disabled)
- Charging should work, the CHARGER register is at a different place, it
is an extended PMU register -> use ascodec_read/write_charger() to
access it
- real interrupts are not used yet for ENRD, we get thousands of
interrupts per second, apparently only limited by the i2c clock.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26116 a1c6a512-1295-4272-9138-f99709370657
- Refactor the program startup. main() is now in main.c like on target, and the implicit application thread will now act as our main thread (previously a separate one was created for this in thread initialization).
This is part of Rockbox as an application and is the first step to make an application port from the uisimulator. In a further step the sim bits from the sdl build will be separated out.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26065 a1c6a512-1295-4272-9138-f99709370657
Use smaller recording buffer and watermarks on these models with 2MB of ram
Rearrange watermark calculation expressions so we can use fractional
numbers of seconds but still with integer results
Only enable spinup time adjustement for ATA targets
Flash targets (sansas and ondiofm) should still work fine, but they were
not tested
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26014 a1c6a512-1295-4272-9138-f99709370657
also remove an obsolete comment and an unrelated option of the config file
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26000 a1c6a512-1295-4272-9138-f99709370657
When the rest of the code is confirmed to work properly without CPU
frequency changes, it will be possible to reliabily test set_cpu_frequency()
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25924 a1c6a512-1295-4272-9138-f99709370657
This is to a) to cleanup firmware/common and firmware/include a bit, but also b) for Rockbox as an application which should use the host system's c library and headers, separating makes it easy to exclude our files from the build.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25850 a1c6a512-1295-4272-9138-f99709370657
