On the ZEN, the LCD is fed continuously by the DMA and this refresh needs to
be stop when the bootloader gives control to the firmware, otherwise the DMA
will source data from invalid region and it might even lock-up if the new
code touches the memory setup. Work around this by properly stopping the LCD
driver: the bootloader assumes that if the target defines HAVE_LCD_ENABLE
in bootloader build (which is unusual) then it needs to stop the LCD. Since
stopping the LCD could produce funny screens, power down backlight
which is expected to power down the LCD too, giving a nice black screen
instead of some random pixels.
Change-Id: I7ce5ba9bfd08e596907c4ff8f80feb189f0576ce
zenxfi2: add support for internal storage on the SD version
The code can now skip devices marked as PROBE if they fail to init, thus
making it possible to handle various kinds of internal storages. The current
code probably doesn't interplay nicely since it acquires pins and never
release them so it will probably break NAND code when it's ready but NAND code
is not ready yet anyway.
Change-Id: I4cb962de4215661e521743a3f511445dbbf28673
This is the basic port to the new target Samsung
YP-R1, which runs on a similar platform as YP-R0.
Port is usable, although there are still
some optimizations that have to be done.
Change-Id: If83a8e386369e413581753780c159026d9e41f04
The port uses the imx233 soc, it's a STMP3650 based Samsung player
Change-Id: I50b6d7e77fd292fab5ed26de87853cd5aaf9eaa4
Reviewed-on: http://gerrit.rockbox.org/490
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
Tested on iPod Mini 1G.
Change-Id: I67ac9b7ed84c34533107136d0aa72e5ce3bcc5bc
Reviewed-on: http://gerrit.rockbox.org/668
Reviewed-by: Frank Gevaerts <frank@gevaerts.be>
HiFi E.T. MA8 is almost the same as MA9 except
another DAC(pcm1792 in ma8, df1704 in ma9).
MA8 has ILI9342 lcd, MA8C has ILI9342C lcd.
Change-Id: If2ac04f5a3382590b2a392c46286559f54b2ed6a
The only difference between this target and HiFi E.T. MA9
is display driver (ILI9342 in MA9 and ILI9342c in MA9C)
Change-Id: Icc3d2490f850902a653175360f12283f3708bbb7
The new code can select among several types of window (user, system, ...).
Furthermore, the type of partitions to use is selectable in config file.
Currently, two types are support: Freescale style MBR and Creative MBLK
Change-Id: I969d60a3d08f2c9448fb4b9c440051b7801b94cd
Disabling these two settings makes the image small enough to build again.
This build has been broken for long enough without any better solution
actually being worked on, so I think this is much better than nothing.
Change-Id: I77c34c1e714fb6e132ed0ce39f0917779efe1125
Enable simulator for the target ypr0 to
be built and used.
Change-Id: I1b080f07ab90f5c4856881d08ad70e1053bbb0c0
Reviewed-on: http://gerrit.rockbox.org/618
Reviewed-by: Frank Gevaerts <frank@gevaerts.be>
Based on FS#9920 by Ryan Press with changes to selection logic so
that it works on my iPod Photo. Should also work on iPod Color/4G
and Mini2G. Moved all target specific code from
firmware/drivers/serial.c into new file
firmware/target/arm/pp/uart-pp.c in the same manner as other
target specific uart code.
Update to fix build error on ipodmini2g by adding defines in config file.
Removed unwanted whitespace
Tested on iPod Photo.
Change-Id: Ia5539563966198e06372d70b5adf2ef78882f863
Reviewed-on: http://gerrit.rockbox.org/455
Reviewed-by: andypotter <liveboxandy@gmail.com>
Tested-by: andypotter <liveboxandy@gmail.com>
Reviewed-by: Marcin Bukat <marcin.bukat@gmail.com>
Implements double-buffered volume, balance and prescaling control in
the main PCM driver when HAVE_SW_VOLUME_CONTROL is defined ensuring
that all PCM is volume controlled and level changes are low in latency.
Supports -73 to +6 dB using a 15-bit factor so that no large-integer
math is needed.
Low-level hardware drivers do not have to implement it themselves but
parameters can be changed (currently defined in pcm-internal.h) to work
best with a particular SoC or to provide different volume ranges.
Volume and prescale calls should be made in the codec driver. It should
appear as a normal hardware interface. PCM volume calls expect .1 dB
units.
Change-Id: Idf6316a64ef4fb8abcede10707e1e6c6d01d57db
Reviewed-on: http://gerrit.rockbox.org/423
Reviewed-by: Michael Sevakis <jethead71@rockbox.org>
Tested-by: Michael Sevakis <jethead71@rockbox.org>
This patch adds to YP-R0 (and other future targets using Linux
framebuffer) the ability to use LCD_ENABLE to save some CPU cycles
while display is powered off.
This patch also changes the way to toggle LCD power: now using
a proper ioctl call, slightly more efficient.
Change-Id: I544de77f5abd4ac1c13d3fe3a6e40a30f7c0bece
Reviewed-on: http://gerrit.rockbox.org/410
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
As per title this patch aims at splitting common target
code and specific target code in a better way to
support future ports within the same environment
(e.g. Samsung YP-R1 where the Linux and the SoC
are the same, with differences in hardware devices
handling)
Change-Id: I67b4918c46403b184d3d8f42ab5aae7d01037fd0
Reviewed-on: http://gerrit.rockbox.org/409
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
Tested-by: Thomas Martitz <kugel@rockbox.org>
The build of bootloader with HAVE_ATA_DMA fails because of missing
commit_discard_dcache(). This seems to be bigger problem as
bootloader builds don't call cache_init() also which seems wrong.
but I know too little about the PP platform to judge.
For now use ATA DMA only in regular builds.
Change-Id: I82873cb1771f5a95ebfbef91ce26744e3abd743c
PP502x ATA DMA was disabled in 55fab77 because it caused various
instability on all targets using it. This instability is fixed in
583c948 via FS#12391. Here, ATA DMA is enabled for all PP502x targets
except nano1g and hdd6330. For nano1g, there may be other causes of
instability and more testing is needed. ATA DMA does not work on hdd6330.
Change-Id: I786b9edb19e74e6eb957ab205ea026f0969200ac
Reviewed-on: http://gerrit.rockbox.org/340
Tested-by: David Hooper <dave@beermex.com>
Tested-by: Boris Gjenero <boris.gjenero@gmail.com>
Reviewed-by: Szymon Dziok <b0hoon@o2.pl>
Tested-by: Szymon Dziok <b0hoon@o2.pl>
Reviewed-by: Marcin Bukat <marcin.bukat@gmail.com>
Fixes missing Settings - General Settings - System - Disk - Spindown
setting.
Change-Id: Iae686598dfd7ad4ca1faf8db9f1271e7808de752
Reviewed-on: http://gerrit.rockbox.org/376
Reviewed-by: Michael Giacomelli <giac2000@hotmail.com>
Tested-by: Michael Giacomelli <giac2000@hotmail.com>
Uses register polling method to decide when it's time to decode
RDS packets.
Change-Id: I1d3cc995ea3350ec7b101438b8f2027130d4a4c9
Reviewed-on: http://gerrit.rockbox.org/320
Reviewed-by: Lorenzo Miori <memorys60@gmail.com>
Tested-by: Lorenzo Miori <memorys60@gmail.com>
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
Tested-by: Thomas Martitz <kugel@rockbox.org>
Implemented scheme:
ARM AHB APB
Normal 50 50 50 MHz
Max 200 100 50 MHz
Frequency scaling is disabled on rk27generic due to too
slow lcd updates when running with 50MHz AHB.
battery_bench shows ~1h runtime improvement on hifiman.
Change-Id: I2c6f8acf6d4570c4e14f5bcc72280b51ce13c408
Basically it uses the default SI4700 radio chip driver, the only thing that's different is the I2C access,
written specifically to interact with my kernel module.
Next things to add are:
- RDS support!
Change-Id: I0ed125641e00f93124d7a34f90dd508e7f1db5a4
Signed-off-by: Lorenzo Miori <memorys60@gmail.com>
