More information: www.openpandora.org
Possible things to implement:
- Special button mappings
- Battery monitoring
- ALSA audio backend
- Automate creation of "pnd" (=binary) file
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29451 a1c6a512-1295-4272-9138-f99709370657
Use own plugins/SOURCES and plugins/SUBDIRS file to avoid
ifdef hell for disabled plugins without a keymap.
This finally brings the credits screen to RaaA.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29392 a1c6a512-1295-4272-9138-f99709370657
Adds Nokia N900, N810 and N800 support.
Features:
- Introduce maemo specific platform defines
- Play audio in silent mode
- Stop playback on incoming calls
- Battery level readout
- Bluetooth headset support
- Save CPU by disabling screen updates if the display
is off or the app doesn't have input focus
- N900: GStreamer audio backend
Kudos to kugel for the code review.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29248 a1c6a512-1295-4272-9138-f99709370657
Major known issues:
- No bootloader yet
- No support for the first-generation 160GB CE-ATA hard disk drive yet
- Audio playback is slow, only FLAC seems to reach realtime
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28953 a1c6a512-1295-4272-9138-f99709370657
* Remove wrong comment in config
* Add a note to the LCD driver stating that it isn't complete and thus non-working atm
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28558 a1c6a512-1295-4272-9138-f99709370657
Remove the hardcoded (and way too small) scroll threshold (the distance moved in pixels before we think the users wants to scroll) and replace it with something based on the actual DPI of the screen.
On Android we call the API for that, on other touchscreens we reimplemented Android's formula (as of 2.2) and calculate it.
Flyspray: 11727
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28548 a1c6a512-1295-4272-9138-f99709370657
FCLK is unused because we use fastbus clocking: CPU clock = PCLK
Base PCLK off PLLA and use the lowest frqeuency for FCLK (24MHz source,
maximum divider)
Save a bit of power, adjust Clipv1/e200v2/Fuzev1 current usage accordingly
Note: the power saving (in mA) is a bit less on e200v2/Fuzev1 than on Clipv1
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28000 a1c6a512-1295-4272-9138-f99709370657
AMS*: define CURRENT_MAX_CHG to give more correct estimation of recharge time
The amount of current each target draws from the charger is defined in
powermgmt-target.h
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27994 a1c6a512-1295-4272-9138-f99709370657
Since memory on 32mb ipod videos is mapped twice, a 64mb build still has codecs and plugins mapped in a usable area. This means that all that needs to be done to support 32mb and 64mb boards with the same build is to adjust audiobufend to avoid using more than the actually present RAM.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27960 a1c6a512-1295-4272-9138-f99709370657
* Forward Java KeyEvents to C layer and translate them to Rockbox BUTTON_*.
* Add a basic Android keymap
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27832 a1c6a512-1295-4272-9138-f99709370657
this greatly reduces CPU load. lcd_update_rect shoves a bit as well.
CPU usage with Rockbox in background is between 3% (with a 200kbps vbr mp3) and 12% (320kbps cbr mp3), so it's low but still dependent on codecs and even particular files.
Driving a WPS with peakmeter, e.g. the builtin one, adds about 30% cpu usage.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27689 a1c6a512-1295-4272-9138-f99709370657
General state is: Rockbox is usable (plays music, saves configuration, touchscreen works too).
Problems:
- Playing music in the background (i.e. when switching to another app) doesn't work reliably, but I'm working on that now.
- no cabbiev2 (only some preliminary files for it), no other default theme.
- screen flickers sometimes if the updates are too frequent
- no multi screen apk/package
- strange behavior when a phone call comes in
The java files (and the eclipse project) resides in android/, which is also supposed to be the build folder.
I've put a small README in there for instructions. There are some steps needed after the make part, which are described there,
and which eclipse mostly handles. But there ought to be some script/makefile rules which do that instead in the future.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27668 a1c6a512-1295-4272-9138-f99709370657
It still works mostly like the simulator. There's also some minor left overs from the sim, but it does not define SIMULATOR.
It installs into the current (build) dir, and you need to run it with '--root .' (because it looks for ./.rockbox and not ./simdisk/rockbox) as options. That's one of the few kludges left that should be resolved soon'ish.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27310 a1c6a512-1295-4272-9138-f99709370657
The simulator defines PLATFORM_HOSTED, as RaaA will do (RaaA will not define SIMULATOR).
The new define is to (de-)select code to compile on hosted platforms generally.
Should be no functional change to targets or the simulator.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27019 a1c6a512-1295-4272-9138-f99709370657
Gets a bit more battery life
Adjust current usage, it was a bit too low for Clipv2/Clip+
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26866 a1c6a512-1295-4272-9138-f99709370657
This adds proper full speed charging support for iPod 4G, Color, Mini 1G, Mini 2G, Nano 1G, and Video. Nano 2G already has support, so now all ipods charge (except 1G-3G whose hardware doesn't support USB charging).
USB charging defaults to on, but will only charge at full speed from a USB host. To charge from an AC charger, you need to set the USB charging mode to "force". It may be possible to detect AC chargers in a future version, at least on some models.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26626 a1c6a512-1295-4272-9138-f99709370657
1) "Charge during USB connection" option is now tristate: off/on/force. Currently "force" behaves just like "on", but in future it will allow charging even when it was not possible to positively identify a charger.
2) The H300 code has been adjusted to use the new system but there should be no functional differences, it already had the USB charging option and its USB/charging support is hardware controlled.
3) The Gigabeat S code has been adjusted to use the new system: the player now has the USB charging option, which wasn't previously available. The player will only charge at full speed when allowed to do so by a working USB host, so USB AC adapters won't work very well; however, they didn't work before either, so this is not a change in functionality.
4) The iPod Nano 2G code has been adjusted to use the new system: it already had the USB charging option. Using a USB AC adapter won't charge at full speed any more (it did before) - the old implementation was equivalent to the not-yet-implemented "force" option in the new system.
No other target should be affected. Support for the "force" mode and support for at least some other iPod models will come in a future commit :)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26570 a1c6a512-1295-4272-9138-f99709370657
A specific poweroff function needs to be used for wake-up to work
Disable RTC in bootloaders for consistency with other Sansas
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26243 a1c6a512-1295-4272-9138-f99709370657
Bring Clipv1 & m200v4 plugin buffer down to this limit
zxbox, chessbox and rockboy build on the clip
rockboy doesn't build on m200v4 due to not enough buttons to make a keymap
Some gameboy roms won't run on Clipv1: tetris does but not pokemon for example
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26144 a1c6a512-1295-4272-9138-f99709370657
build it on fuzev2 and clipv2 too, it should be the same controller
as3525v1 file is only build for CONFIG_USBOTG == USBOTG_AS3525, no need
to check for it in the .c file
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26142 a1c6a512-1295-4272-9138-f99709370657
- only enable overlays for targets with very small plugin buffer (<=
0x10000 bytes, i.e. archos)
- change the condition for rockboy to reflect exactly why it can be
built or not
- Some plugins need a large plugin buffer, only enable them if the
buffer is big enough (sizes measured on Clipv1)
- disable MIDI if we have 2MB (or less), we won't be able to load the
instruments in the audio buffer
- remove unusable lua overlay loader
- sokoban code is bigger on clipv1 than on SH, assume it code is 20kB on
anything but SH so it builds with buffer smaller than 192kB
- reduce the Clipv1 plugin buffer size from 288kB to 96kb, disabling
zxbox, chessbox, and fft
zxbox and chessbox have overlays which run on archos, we just need to
enable them on other targets. We'll also be able to run rockboy.
fft won't run as it needs a large plugin buffer for greylib
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26141 a1c6a512-1295-4272-9138-f99709370657
To be sure that there is no mistake in this code, it is run *after*
the known to work HOME & LEFT buttons checks, unlike other Sansas
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26122 a1c6a512-1295-4272-9138-f99709370657
- Enable end of charge monitoring once, it doesn't need to be disabled
- Acknowledge the first (wrong) end of charge interrupt on charger enable
(this had been broken in r25299)
- Centralize reads to ENRD* registers and cache the results when needed
- on PP it is not needed because reads are atomic, we only check for
end of charge when the charging, and for charger presence when
discharging
as3525v2 (using as3543) specifics
- I got the datasheet today from AMS, thanks to them for being so fast
and not require me to sign tons of papers!
- USB detection now works on as3525v2 using the as3543. Clip+ won't
reboot to OF yet, it needs mkamsboot support first (usbstack disabled)
- Charging should work, the CHARGER register is at a different place, it
is an extended PMU register -> use ascodec_read/write_charger() to
access it
- real interrupts are not used yet for ENRD, we get thousands of
interrupts per second, apparently only limited by the i2c clock.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26116 a1c6a512-1295-4272-9138-f99709370657
- Refactor the program startup. main() is now in main.c like on target, and the implicit application thread will now act as our main thread (previously a separate one was created for this in thread initialization).
This is part of Rockbox as an application and is the first step to make an application port from the uisimulator. In a further step the sim bits from the sdl build will be separated out.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26065 a1c6a512-1295-4272-9138-f99709370657
Use smaller recording buffer and watermarks on these models with 2MB of ram
Rearrange watermark calculation expressions so we can use fractional
numbers of seconds but still with integer results
Only enable spinup time adjustement for ATA targets
Flash targets (sansas and ondiofm) should still work fine, but they were
not tested
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26014 a1c6a512-1295-4272-9138-f99709370657
also remove an obsolete comment and an unrelated option of the config file
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26000 a1c6a512-1295-4272-9138-f99709370657
When the rest of the code is confirmed to work properly without CPU
frequency changes, it will be possible to reliabily test set_cpu_frequency()
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25924 a1c6a512-1295-4272-9138-f99709370657
This is to a) to cleanup firmware/common and firmware/include a bit, but also b) for Rockbox as an application which should use the host system's c library and headers, separating makes it easy to exclude our files from the build.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25850 a1c6a512-1295-4272-9138-f99709370657
The cost of LBA48 support is very small and it means that upgraded drives/CF cards which are over 128GiB will just work with no custom build required. There should be no runtime effect on disks which do not require it.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25553 a1c6a512-1295-4272-9138-f99709370657
Move scrollwheel parsing function into separate file as it's reused.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25425 a1c6a512-1295-4272-9138-f99709370657
Instead of modifying CGU_PROC to get 24MHz pclk, just switch to fastbus else Clip+ wouldn't boot
Tested on fuzev1/Clip+
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25413 a1c6a512-1295-4272-9138-f99709370657
Add HAVE_AS3543 config define to differentiate the bits changed since as3514/as3517
Enable recording on Fuzev2/Clipv2/Clip+, although it was tested on Clip+ only
Note: storage is still read-only so I tested by listening to headphones loopback and watching the recording level in recscreen
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25390 a1c6a512-1295-4272-9138-f99709370657
correct USB product ID
remove a define which is common to all as3525v2 and then built-in in the driver
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25367 a1c6a512-1295-4272-9138-f99709370657
Introduce STORAGE_ALIGN_DOWN, STORAGE_PAD (using new CACHE_PAD) and
STORAGE_OVERLAP (using new CACHE_OVERLAP), make them useful only when
PROC_NEEDS_CACHEALIGN and STORAGE_NEEDS_ALIGN are defined
Modify PP and nano2g system-target.h accordingly
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25336 a1c6a512-1295-4272-9138-f99709370657
- buttonlight works
- backlight turns on (quite weak though and no brightness adjustment/backlight off functional)
- don't share drivers with e200v2/fuzev1 for now as it's not entirely clear how dbop plays into this
- deactivte scrollwheel as it's messing up the timer setup in kernel-as3525.c indicating the dbop input reading doesn't work well
- still no working bootloader/no lcd or buttons
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25225 a1c6a512-1295-4272-9138-f99709370657
CGU_PROC looks different from as3525v1 and there have been reports of
Clip+ becoming warm when boosted
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25020 a1c6a512-1295-4272-9138-f99709370657
Compilation shows a warning for the first argument of the lcd_bitmap() call in show_logo().
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24911 a1c6a512-1295-4272-9138-f99709370657
The code for this was already present as it seems to behave the same as the Video, but CONFIG_CHARGING had not been set, probably for lack of testing. It has now been tested.
This allows the WPS/status bar to correctly display the charging status, and also fixes various bugs:
FS#6891 iPod Nano Charger Support
FS#6940 Nano Car Adapter Mode enabled
FS#10591 iPod nano reboots on idle poweroff when plugged in
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24581 a1c6a512-1295-4272-9138-f99709370657
Now making the Fuzev2 bootloader build should be pretty easy
TODO:
- write button driver (FlynDice found all buttons already)
- find button light
- decide if lcd-ssd1303.c must be modified for Clip+ using SSP or forked
- check if backlight code works (I copied Clipv2 code)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24520 a1c6a512-1295-4272-9138-f99709370657
DMA is only used for reading because writing seems to be slower with DMA.
Only requests which are cacheline aligned (16 bytes) will use DMA, so many
requests will still use PIO at this point; a later change will align more
reads.
Part of FS#9708, original DMA code by Boris Gjenero (dreamlayers).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24405 a1c6a512-1295-4272-9138-f99709370657
Reclaim 128kB of plugin buffer, audio buffer is now 4 times larger
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24323 a1c6a512-1295-4272-9138-f99709370657
That line is annoying, as it is catches when grepping for HAVE_LCD_COLOR
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24279 a1c6a512-1295-4272-9138-f99709370657
This will enable to use morse input on targets that doesn't have enough key for both the keyboard and morse input in one context.
Enable morse input on archosondio as an example.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24250 a1c6a512-1295-4272-9138-f99709370657
- add lcd_set_invert()
- add lcd_set_flip() commented out since not working fine yet:
mpegplayer isn't flipped, and statusbar display is buggy
- use the registers list from e200v2
- cosmetics (indentation fix, comments changes, function names, casts,
function moves, ...) to make the diff with lcd-e200v2.c shorter
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24181 a1c6a512-1295-4272-9138-f99709370657
Reuse some code from Clip (LCD) and a lot of code from AS3525
Add a new CPU type : AS3525v2, identical to AS3525 except it's an ARMv5 (arm926-ejs)
SD code still not working
For an unknown reason LCD doesn't work anymore (to be investigated)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24131 a1c6a512-1295-4272-9138-f99709370657
