Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
rockbox/firmware/SOURCES

1274 lines
34 KiB
Text
Raw Normal View History

More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
ata_idle_notify.c
Implement the playback event handling as a system-wide multi-purpose event system. Unified mpeg.c and playback.c audio event handling. Converted ata_idle_notify to use the new event handling system also. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16682 a1c6a512-1295-4272-9138-f99709370657
2008-03-16 13:55:16 +00:00
events.c
new SOURCES file that specifies which files to build in each dir, use config.h preprocessor symbols to make conditionals use the GCCOPTS now specified in the root Makefile by configure git-svn-id: svn://svn.rockbox.org/rockbox/trunk@5158 a1c6a512-1295-4272-9138-f99709370657
2004-10-04 13:03:33 +00:00
backlight.c
buffer.c
Move screendump from apps to firmware, solving two nasty firmware-to-apps calls. This required to move the filename creation functions as well. * Fix bug in the BMP header of Clip screendumps. * Add remote screendump for targets with an LCD remote. * Simplify some ifdefs and rename a macro in the sim. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19967 a1c6a512-1295-4272-9138-f99709370657
2009-02-10 23:43:37 +00:00
general.c
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
powermgmt.c
system.c
usb.c
#ifdef ROCKBOX_HAS_LOGF
logf.c
#endif /* ROCKBOX_HAS_LOGF */
Add a complete priority inheritance implementation to the scheduler (all mutex ownership and queue_send calls are inheritable). Priorities are differential so that dispatch depends on the runnable range of priorities. Codec priority can therefore be raised in small steps (pcmbuf updated to enable). Simplify the kernel functions to ease implementation and use the same kernel.c for both sim and target (I'm tired of maintaining two ;_). 1) Not sure if a minor audio break at first buffering issue will exist on large-sector disks (the main mutex speed issue was genuinely resolved earlier). At this point it's best dealt with at the buffering level. It seems a larger filechunk could be used again. 2) Perhaps 64-bit sims will have some minor issues (finicky) but a backroll of the code of concern there is a 5-minute job. All kernel objects become incompatible so a full rebuild and update is needed. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16791 a1c6a512-1295-4272-9138-f99709370657
2008-03-25 02:34:12 +00:00
kernel.c
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
#ifndef SIMULATOR
#ifdef RB_PROFILE
profile.c
#endif /* RB_PROFILE */
rolo.c
thread.c
timer.c
#endif /* SIMULATOR */
panic.c
debug.c
/* Common */
new SOURCES file that specifies which files to build in each dir, use config.h preprocessor symbols to make conditionals use the GCCOPTS now specified in the root Makefile by configure git-svn-id: svn://svn.rockbox.org/rockbox/trunk@5158 a1c6a512-1295-4272-9138-f99709370657
2004-10-04 13:03:33 +00:00
common/atoi.c
Performance optimizations for tagcache commit. Still more left to be done. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@9721 a1c6a512-1295-4272-9138-f99709370657
2006-04-18 18:56:56 +00:00
common/crc32.c
Bring back rolo for mi4-based targets (H10 and Sansa). git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13550 a1c6a512-1295-4272-9138-f99709370657
2007-06-04 13:48:21 +00:00
#ifdef MI4_FORMAT
common/crc32-mi4.c
#endif
new SOURCES file that specifies which files to build in each dir, use config.h preprocessor symbols to make conditionals use the GCCOPTS now specified in the root Makefile by configure git-svn-id: svn://svn.rockbox.org/rockbox/trunk@5158 a1c6a512-1295-4272-9138-f99709370657
2004-10-04 13:03:33 +00:00
common/ctype.c
Unified build system to use SOURCES for sim builds too, a single Makefile-look made by configure and various related adjustments. This has not yet been tested on cygwin. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@6001 a1c6a512-1295-4272-9138-f99709370657
2005-02-18 13:47:17 +00:00
#ifndef SIMULATOR
Makes apps and plugins interract with directories using a posix-like api instead of calling dircache / simulator functions (no additionnal layer added, only a cosmetic change) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13943 a1c6a512-1295-4272-9138-f99709370657
2007-07-20 17:06:55 +00:00
common/dir_uncached.c
Unified build system to use SOURCES for sim builds too, a single Makefile-look made by configure and various related adjustments. This has not yet been tested on cygwin. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@6001 a1c6a512-1295-4272-9138-f99709370657
2005-02-18 13:47:17 +00:00
common/file.c
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
#endif /* SIMULATOR */
Fixed a problem with dircache where filetree modified dircache structures directly. Moved #ifdef directly to SOURCES instead of dircache.c to decide whether to compile the cache or not. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@7599 a1c6a512-1295-4272-9138-f99709370657
2005-10-08 18:41:11 +00:00
#ifdef HAVE_DIRCACHE
Implemented directory caching. No more waiting for disk to spin up while browsing when cache is enabled (system -> disk -> enable directory cache). Cache building on boot is transparent except the first boot. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@7588 a1c6a512-1295-4272-9138-f99709370657
2005-10-07 17:38:05 +00:00
common/dircache.c
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
#endif /* HAVE_DIRCACHE */
new SOURCES file that specifies which files to build in each dir, use config.h preprocessor symbols to make conditionals use the GCCOPTS now specified in the root Makefile by configure git-svn-id: svn://svn.rockbox.org/rockbox/trunk@5158 a1c6a512-1295-4272-9138-f99709370657
2004-10-04 13:03:33 +00:00
common/disk.c
Allow building simulators on systems where errno is thread-local by using the system's implementation of errno.h for simulator builds. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@8871 a1c6a512-1295-4272-9138-f99709370657
2006-02-28 23:56:44 +00:00
#if !defined(SIMULATOR) || defined(__MINGW32__) || defined(__CYGWIN__)
new SOURCES file that specifies which files to build in each dir, use config.h preprocessor symbols to make conditionals use the GCCOPTS now specified in the root Makefile by configure git-svn-id: svn://svn.rockbox.org/rockbox/trunk@5158 a1c6a512-1295-4272-9138-f99709370657
2004-10-04 13:03:33 +00:00
common/errno.c
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
#endif /* !defined(SIMULATOR) || defined(__MINGW32__) || defined(__CYGWIN__) */
new SOURCES file that specifies which files to build in each dir, use config.h preprocessor symbols to make conditionals use the GCCOPTS now specified in the root Makefile by configure git-svn-id: svn://svn.rockbox.org/rockbox/trunk@5158 a1c6a512-1295-4272-9138-f99709370657
2004-10-04 13:03:33 +00:00
common/memcmp.c
Patch #1232549 by Ryan Jackson, adds seeking and comments to Vorbis playback git-svn-id: svn://svn.rockbox.org/rockbox/trunk@7025 a1c6a512-1295-4272-9138-f99709370657
2005-07-05 08:43:36 +00:00
common/memchr.c
new SOURCES file that specifies which files to build in each dir, use config.h preprocessor symbols to make conditionals use the GCCOPTS now specified in the root Makefile by configure git-svn-id: svn://svn.rockbox.org/rockbox/trunk@5158 a1c6a512-1295-4272-9138-f99709370657
2004-10-04 13:03:33 +00:00
common/qsort.c
common/random.c
common/sprintf.c
common/strcasecmp.c
Added ID3 searching git-svn-id: svn://svn.rockbox.org/rockbox/trunk@5683 a1c6a512-1295-4272-9138-f99709370657
2005-01-27 22:21:08 +00:00
common/strcasestr.c
new SOURCES file that specifies which files to build in each dir, use config.h preprocessor symbols to make conditionals use the GCCOPTS now specified in the root Makefile by configure git-svn-id: svn://svn.rockbox.org/rockbox/trunk@5158 a1c6a512-1295-4272-9138-f99709370657
2004-10-04 13:03:33 +00:00
common/strcat.c
common/strchr.c
common/strcmp.c
Commit FS#8314. This adds strnat[case]cmp written by Martin Pool, which respects numbers within strings, and gives a more intuitive sorting. This also adds a setting, so that the sorting can be used in the file browser. The implementation is very generic, and can possibly be used in other places. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20155 a1c6a512-1295-4272-9138-f99709370657
2009-03-01 17:55:59 +00:00
common/strnatcmp.c
new SOURCES file that specifies which files to build in each dir, use config.h preprocessor symbols to make conditionals use the GCCOPTS now specified in the root Makefile by configure git-svn-id: svn://svn.rockbox.org/rockbox/trunk@5158 a1c6a512-1295-4272-9138-f99709370657
2004-10-04 13:03:33 +00:00
common/strcpy.c
common/strncmp.c
common/strncpy.c
common/strrchr.c
common/strtok.c
* implement strstr * clean up usb_arcotg_dcd_enable git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14740 a1c6a512-1295-4272-9138-f99709370657
2007-09-17 23:06:23 +00:00
common/strstr.c
Make database endianess independent. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12297 a1c6a512-1295-4272-9138-f99709370657
2007-02-13 21:51:18 +00:00
common/structec.c
new SOURCES file that specifies which files to build in each dir, use config.h preprocessor symbols to make conditionals use the GCCOPTS now specified in the root Makefile by configure git-svn-id: svn://svn.rockbox.org/rockbox/trunk@5158 a1c6a512-1295-4272-9138-f99709370657
2004-10-04 13:03:33 +00:00
common/timefuncs.c
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
common/unicode.c
Moved some assembly optimizations to the target tree git-svn-id: svn://svn.rockbox.org/rockbox/trunk@10318 a1c6a512-1295-4272-9138-f99709370657
2006-07-25 11:16:03 +00:00
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
/* Display */
Scroll on main and remote with a single thread. Change the way system messages are defined before running out is an issue (which requires a full update of rockbox on the player). git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14035 a1c6a512-1295-4272-9138-f99709370657
2007-07-28 08:12:05 +00:00
scroll_engine.c
Unified build system to use SOURCES for sim builds too, a single Makefile-look made by configure and various related adjustments. This has not yet been tested on cygwin. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@6001 a1c6a512-1295-4272-9138-f99709370657
2005-02-18 13:47:17 +00:00
#ifdef HAVE_LCD_CHARCELLS
First step of charcell LCD code rework: * Make it fully unicode aware so that adding non-ISO8859-1 scripts becomes possible (limited by the LCD capabilities of course). * Make the API more similar to the bitmap LCD code's API. * Moved hardware dependent parts to target tree. * Simplified code. * Jumpscroll temporarily non-functional. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12916 a1c6a512-1295-4272-9138-f99709370657
2007-03-26 07:52:13 +00:00
drivers/lcd-charcell.c
drivers/lcd-charset-player.c
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
#endif /* HAVE_LCD_CHARCELLS */
Unified build system to use SOURCES for sim builds too, a single Makefile-look made by configure and various related adjustments. This has not yet been tested on cygwin. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@6001 a1c6a512-1295-4272-9138-f99709370657
2005-02-18 13:47:17 +00:00
#ifdef HAVE_LCD_BITMAP
move some code from .h files to .c files and polish unicode.c a bit git-svn-id: svn://svn.rockbox.org/rockbox/trunk@8174 a1c6a512-1295-4272-9138-f99709370657
2005-12-06 15:04:48 +00:00
arabjoin.c
Patch #783877 by Gadi Cohen updated by Naftali Goldstein - Bidirectional text support for Hebrew and Arabic git-svn-id: svn://svn.rockbox.org/rockbox/trunk@7292 a1c6a512-1295-4272-9138-f99709370657
2005-08-08 19:23:28 +00:00
bidi.c
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
font_cache.c
font.c
Add support for loadable vkeyboard layouts git-svn-id: svn://svn.rockbox.org/rockbox/trunk@9347 a1c6a512-1295-4272-9138-f99709370657
2006-03-29 16:21:42 +00:00
hangul.c
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
lru.c
Move screendump from apps to firmware, solving two nasty firmware-to-apps calls. This required to move the filename creation functions as well. * Fix bug in the BMP header of Clip screendumps. * Add remote screendump for targets with an LCD remote. * Simplify some ifdefs and rename a macro in the sim. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19967 a1c6a512-1295-4272-9138-f99709370657
2009-02-10 23:43:37 +00:00
#ifndef BOOTLOADER
screendump.c
#endif
Further iPod 3G work from Seven Le Mesle git-svn-id: svn://svn.rockbox.org/rockbox/trunk@8583 a1c6a512-1295-4272-9138-f99709370657
2006-02-05 17:34:49 +00:00
#if LCD_DEPTH == 1
Split 1 bit LCD code and move appropriate parts to target tree. Only archos code is tested. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11517 a1c6a512-1295-4272-9138-f99709370657
2006-11-12 13:22:59 +00:00
drivers/lcd-1bit-vert.c
Further iPod 3G work from Seven Le Mesle git-svn-id: svn://svn.rockbox.org/rockbox/trunk@8583 a1c6a512-1295-4272-9138-f99709370657
2006-02-05 17:34:49 +00:00
#elif LCD_DEPTH == 2
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
#if LCD_PIXELFORMAT == HORIZONTAL_PACKING
Create an SDL sim for the iPod 4G Grayscale and also create an IPOD_ARCH define for all iPods. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@8636 a1c6a512-1295-4272-9138-f99709370657
2006-02-09 00:48:53 +00:00
drivers/lcd-2bit-horz.c
H100/120: Split lcd driver into pixel format and device specific parts. Adjustment of contrast range to just a little less than white to a little more than black. Really only had to reset minimum. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11487 a1c6a512-1295-4272-9138-f99709370657
2006-11-10 00:02:28 +00:00
#elif LCD_PIXELFORMAT == VERTICAL_PACKING
drivers/lcd-2bit-vert.c
More iAudio M3 work. Bootloader compiles, but doesn't work yet. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16645 a1c6a512-1295-4272-9138-f99709370657
2008-03-12 20:35:42 +00:00
#elif LCD_PIXELFORMAT == VERTICAL_INTERLEAVED
drivers/lcd-2bit-vi.c
H100/120: Split lcd driver into pixel format and device specific parts. Adjustment of contrast range to just a little less than white to a little more than black. Really only had to reset minimum. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11487 a1c6a512-1295-4272-9138-f99709370657
2006-11-10 00:02:28 +00:00
#endif /* LCD_PIXELFORMAT */
Initial commit of work-in-progress iPod port git-svn-id: svn://svn.rockbox.org/rockbox/trunk@7781 a1c6a512-1295-4272-9138-f99709370657
2005-11-07 23:07:19 +00:00
#elif LCD_DEPTH == 16
drivers/lcd-16bit.c
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
#endif /* LCD_DEPTH */
#endif /* HAVE_LCD_BITMAP */
X5 remote LCD drawing. This will break target linking atm - lcd_remote_update[_rect]() are not yet implemented. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@10347 a1c6a512-1295-4272-9138-f99709370657
2006-07-28 07:35:45 +00:00
#ifdef HAVE_REMOTE_LCD
#if LCD_REMOTE_DEPTH == 1
Move target specific parts of the H100 remote LCD driver to target tree. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12485 a1c6a512-1295-4272-9138-f99709370657
2007-02-25 22:09:14 +00:00
drivers/lcd-remote-1bit-v.c
X5 remote LCD drawing. This will break target linking atm - lcd_remote_update[_rect]() are not yet implemented. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@10347 a1c6a512-1295-4272-9138-f99709370657
2006-07-28 07:35:45 +00:00
#elif LCD_REMOTE_DEPTH == 2
drivers/lcd-remote-2bit-vi.c
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
#endif /* LCD_REMOTE_DEPTH */
#endif /* HAVE_REMOTE_LCD */
Commit FS#9724, which reworks the preprocessor defines related to backlight fading to a CONFIG_BACKLIGHT_FADING style. The apps/ code will only see which setting is supposed to be used, specific backlight fading handling is kept in firmware, slightly reword the manual text about software fading too with regards to the Gigabeat S git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19860 a1c6a512-1295-4272-9138-f99709370657
2009-01-26 23:21:49 +00:00
#if (CONFIG_BACKLIGHT_FADING == BACKLIGHT_FADING_SW_SETTING) \
|| (CONFIG_BACKLIGHT_FADING == BACKLIGHT_FADING_SW_HW_REG)
Rename software backlight fading files, as we don't call it thread fading. Correct a copyright info too. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19818 a1c6a512-1295-4272-9138-f99709370657
2009-01-22 10:50:11 +00:00
backlight-sw-fading.c
Commit FS#9724, which reworks the preprocessor defines related to backlight fading to a CONFIG_BACKLIGHT_FADING style. The apps/ code will only see which setting is supposed to be used, specific backlight fading handling is kept in firmware, slightly reword the manual text about software fading too with regards to the Gigabeat S git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19860 a1c6a512-1295-4272-9138-f99709370657
2009-01-26 23:21:49 +00:00
#endif /* CONFIG_BACKLIGHT_FADING */
Add software backlight fading for E100/H300/X5/D2, by Thomas Martitz and others - see FS#6800 for credits. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19221 a1c6a512-1295-4272-9138-f99709370657
2008-11-26 08:26:13 +00:00
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
/* Misc. */
Unified build system to use SOURCES for sim builds too, a single Makefile-look made by configure and various related adjustments. This has not yet been tested on cygwin. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@6001 a1c6a512-1295-4272-9138-f99709370657
2005-02-18 13:47:17 +00:00
drivers/led.c
Enable a lot more features for simulators and add stubs where necessary, simulators should now work with identical lng and voice files as the respective target git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14299 a1c6a512-1295-4272-9138-f99709370657
2007-08-12 19:49:03 +00:00
drivers/button.c
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
#ifndef SIMULATOR
1) add support for ata-as-arm 2) remove obsolete audio-creativezvm.c 3) fix registers in i2c-dm320.c git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17316 a1c6a512-1295-4272-9138-f99709370657
2008-05-03 13:43:26 +00:00
#ifdef HAVE_DAC3550A
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
drivers/dac.c
1) add support for ata-as-arm 2) remove obsolete audio-creativezvm.c 3) fix registers in i2c-dm320.c git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17316 a1c6a512-1295-4272-9138-f99709370657
2008-05-03 13:43:26 +00:00
#endif
Simplify conditions for including serial port support (it's now HAVE_SERIAL). This should save a little binsize and RAM for target that don't have/use a serial port. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19936 a1c6a512-1295-4272-9138-f99709370657
2009-02-07 11:15:30 +00:00
#ifdef HAVE_SERIAL
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
drivers/serial.c
Simplify conditions for including serial port support (it's now HAVE_SERIAL). This should save a little binsize and RAM for target that don't have/use a serial port. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19936 a1c6a512-1295-4272-9138-f99709370657
2009-02-07 11:15:30 +00:00
#endif
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
#endif /* SIMULATOR */
Hopefully finally fix red .. (/me needs to cleanup his tree) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20057 a1c6a512-1295-4272-9138-f99709370657
2009-02-19 22:33:55 +00:00
#ifdef HAVE_TOUCHSCREEN
drivers/touchscreen.c
#endif
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
Usb Stack: only setup packet handling, and not enabled by default as there is a lot to do. * settings code is not fully ready -> changing device driver has no effect * clean ups * check copyriths * find a way to detect IN transfers * support for full and highspeed * ... git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14470 a1c6a512-1295-4272-9138-f99709370657
2007-08-27 16:04:32 +00:00
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
/* Storage */
#ifndef SIMULATOR
cleanup storage defines git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18950 a1c6a512-1295-4272-9138-f99709370657
2008-10-31 21:25:04 +00:00
#if (CONFIG_STORAGE & STORAGE_MMC)
new SOURCES file that specifies which files to build in each dir, use config.h preprocessor symbols to make conditionals use the GCCOPTS now specified in the root Makefile by configure git-svn-id: svn://svn.rockbox.org/rockbox/trunk@5158 a1c6a512-1295-4272-9138-f99709370657
2004-10-04 13:03:33 +00:00
drivers/ata_mmc.c
make the meizu bootloaders compile again with the new storage infrastructure git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19088 a1c6a512-1295-4272-9138-f99709370657
2008-11-11 14:11:49 +00:00
#elif (CONFIG_STORAGE & STORAGE_NAND) && (CONFIG_NAND == NAND_IFP7XX)
Work-in-progress iriver iFP-7xx port by Tomasz Malesinski git-svn-id: svn://svn.rockbox.org/rockbox/trunk@8342 a1c6a512-1295-4272-9138-f99709370657
2006-01-12 00:35:50 +00:00
drivers/ata_flash.c
make the meizu bootloaders compile again with the new storage infrastructure git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19088 a1c6a512-1295-4272-9138-f99709370657
2008-11-11 14:11:49 +00:00
#elif (CONFIG_STORAGE & STORAGE_NAND) && (CONFIG_NAND == NAND_TCC)
cleanup storage defines git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18950 a1c6a512-1295-4272-9138-f99709370657
2008-10-31 21:25:04 +00:00
target/arm/ata-nand-telechips.c
make the meizu bootloaders compile again with the new storage infrastructure git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19088 a1c6a512-1295-4272-9138-f99709370657
2008-11-11 14:11:49 +00:00
#elif (CONFIG_STORAGE & STORAGE_NAND) && (CONFIG_NAND == NAND_SAMSUNG)
target/arm/s5l8700/ata-nand-s5l8700.c
cleanup storage defines git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18950 a1c6a512-1295-4272-9138-f99709370657
2008-10-31 21:25:04 +00:00
#elif (CONFIG_STORAGE & STORAGE_ATA)
Compile ata_mmc.c for targets with mmc, ata.c for all others. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@5174 a1c6a512-1295-4272-9138-f99709370657
2004-10-05 08:11:11 +00:00
drivers/ata.c
Add ramdisk storage driver. It will be useful for developing multi-driver storage git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18993 a1c6a512-1295-4272-9138-f99709370657
2008-11-03 20:52:27 +00:00
#elif (CONFIG_STORAGE & STORAGE_RAMDISK)
drivers/ramdisk.c
cleanup storage defines git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18950 a1c6a512-1295-4272-9138-f99709370657
2008-10-31 21:25:04 +00:00
#endif /* CONFIG_STORAGE */
new SOURCES file that specifies which files to build in each dir, use config.h preprocessor symbols to make conditionals use the GCCOPTS now specified in the root Makefile by configure git-svn-id: svn://svn.rockbox.org/rockbox/trunk@5158 a1c6a512-1295-4272-9138-f99709370657
2004-10-04 13:03:33 +00:00
drivers/fat.c
cleanup storage defines git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18950 a1c6a512-1295-4272-9138-f99709370657
2008-10-31 21:25:04 +00:00
#if (CONFIG_STORAGE & STORAGE_MMC) || (CONFIG_STORAGE & STORAGE_SD)
Accept FS#7134 - Sansa: external sd card support by Antonius Hellmann with some tweaks. All testers have given the green light. (Now for the RED ?? ;). git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13741 a1c6a512-1295-4272-9138-f99709370657
2007-06-30 02:08:27 +00:00
hotswap.c
#endif
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
#endif /* SIMULATOR */
/* EEPROM */
#ifdef HAVE_EEPROM
drivers/eeprom_24cxx.c
#ifdef HAVE_EEPROM_SETTINGS
eeprom_settings.c
#endif /* HAVE_EEPROM_SETTINGS */
#endif /* HAVE_EEPROM */
/* RTC */
#ifndef SIMULATOR
move rtc functions to seperate files git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11614 a1c6a512-1295-4272-9138-f99709370657
2006-11-27 09:44:56 +00:00
#if (CONFIG_RTC == RTC_M41ST84W)
drivers/rtc/rtc_m41st84w.c
#elif (CONFIG_RTC == RTC_PCF50606)
drivers/rtc/rtc_pcf50606.c
#elif (CONFIG_RTC == RTC_PCF50605)
drivers/rtc/rtc_pcf50605.c
#elif (CONFIG_RTC == RTC_E8564)
drivers/rtc/rtc_e8564.c
FS#6419 - driver for H1x0 series RTC Mod with runtime detection git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12520 a1c6a512-1295-4272-9138-f99709370657
2007-02-28 13:20:36 +00:00
#elif (CONFIG_RTC == RTC_DS1339_DS3231)
drivers/rtc/rtc_ds1339_ds3231.c
merge a big part of the unofficial gigabeat cvs back. Includes working bootloader and rockbox with audio. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11850 a1c6a512-1295-4272-9138-f99709370657
2006-12-29 02:49:12 +00:00
#elif (CONFIG_RTC == RTC_S3C2440)
drivers/rtc/rtc_s3c2440.c
RTC support for Sansa. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12185 a1c6a512-1295-4272-9138-f99709370657
2007-02-03 13:10:17 +00:00
#elif (CONFIG_RTC == RTC_AS3514)
drivers/rtc/rtc_as3514.c
spi is shared between the rtc and tsc2100 adds the very begining of the rtc driver (only reads the time currently git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14935 a1c6a512-1295-4272-9138-f99709370657
2007-10-01 05:27:43 +00:00
#elif (CONFIG_RTC == RTC_RX5X348AB)
drivers/rtc/rtc_rx5x348ab.c
mrobe 100: real time clock (if anybody recognises the RTC chip let me know) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16208 a1c6a512-1295-4272-9138-f99709370657
2008-02-03 18:15:39 +00:00
#elif (CONFIG_RTC == RTC_MR100)
drivers/rtc/rtc_mr100.c
Add a PMIC-based RTC driver for Gigabeat S. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17236 a1c6a512-1295-4272-9138-f99709370657
2008-04-24 09:22:39 +00:00
#elif (CONFIG_RTC == RTC_MC13783)
drivers/rtc/rtc_mc13783.c
Add the Sansa M200 (v1) as a target - it's extremely similar to the Logik DAX (the LCD driver worked unchanged). Plus various tcc77x work, including a working tick interrupt (enabled in the bootloader). Rockbox itself builds for the M200 (there are no keymaps yet for the DAX), but doesn't progress very far due to the lack of an ATA (NAND flash) driver. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17306 a1c6a512-1295-4272-9138-f99709370657
2008-05-02 19:12:09 +00:00
#elif (CONFIG_RTC == RTC_TCC77X)
drivers/rtc/rtc_tcc77x.c
Onda VX747: 1) Improve touchscreen handling 2) Add RTC driver 4) Add NAND Flash ID scanning 3) Other minor fixes Nand_ID: Add a generic NAND ID database (currently only containg Samsung chips) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18052 a1c6a512-1295-4272-9138-f99709370657
2008-07-15 17:17:01 +00:00
#elif (CONFIG_RTC == RTC_JZ47XX)
drivers/rtc/rtc_jz4740.c
move rtc functions to seperate files git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11614 a1c6a512-1295-4272-9138-f99709370657
2006-11-27 09:44:56 +00:00
#endif /* (CONFIG_RTC == RTC_) */
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
#endif /* SIMULATOR */
/* Tuner */
Explicilty set CONFIG_ defines to 0 which are not used.. because doing #if defined(BLAA) && BLAA == something defeats the point of Wundef git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12378 a1c6a512-1295-4272-9138-f99709370657
2007-02-18 02:04:47 +00:00
#if CONFIG_TUNER
Do some planned radio interface cleanup since adding in the LV24020LP. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13880 a1c6a512-1295-4272-9138-f99709370657
2007-07-14 11:20:31 +00:00
tuner.c
Fix all the red this time? git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13884 a1c6a512-1295-4272-9138-f99709370657
2007-07-14 13:41:59 +00:00
#ifndef SIMULATOR
Do some planned radio interface cleanup since adding in the LV24020LP. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13880 a1c6a512-1295-4272-9138-f99709370657
2007-07-14 11:20:31 +00:00
#if (CONFIG_TUNER & LV24020LP)
drivers/tuner/lv24020lp.c
#endif /* (CONFIG_TUNER & LV24020LP) */
Philips tuner prepared, new middle layer to abstract which tuner is used git-svn-id: svn://svn.rockbox.org/rockbox/trunk@5289 a1c6a512-1295-4272-9138-f99709370657
2004-10-15 21:41:46 +00:00
#if (CONFIG_TUNER & S1A0903X01)
new SOURCES file that specifies which files to build in each dir, use config.h preprocessor symbols to make conditionals use the GCCOPTS now specified in the root Makefile by configure git-svn-id: svn://svn.rockbox.org/rockbox/trunk@5158 a1c6a512-1295-4272-9138-f99709370657
2004-10-04 13:03:33 +00:00
drivers/fmradio.c
Do some planned radio interface cleanup since adding in the LV24020LP. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13880 a1c6a512-1295-4272-9138-f99709370657
2007-07-14 11:20:31 +00:00
drivers/tuner/s1a0903x01.c
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
#endif /* (CONFIG_TUNER & S1A0903X01) */
Philips tuner prepared, new middle layer to abstract which tuner is used git-svn-id: svn://svn.rockbox.org/rockbox/trunk@5289 a1c6a512-1295-4272-9138-f99709370657
2004-10-15 21:41:46 +00:00
#if (CONFIG_TUNER & TEA5767)
Do some planned radio interface cleanup since adding in the LV24020LP. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13880 a1c6a512-1295-4272-9138-f99709370657
2007-07-14 11:20:31 +00:00
drivers/tuner/tea5767.c
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
#endif /* (CONFIG_TUNER & TEA5767) */
Add more driver stubs to make the Fuze and e200v2 main builds compile; Correct the memory definition for the Fuze (8MB) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19090 a1c6a512-1295-4272-9138-f99709370657
2008-11-11 14:46:13 +00:00
#if (CONFIG_TUNER & SI4700)
drivers/tuner/si4700.c
#endif /* (CONFIG_TUNER & SI4700) */
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
#endif /*SIMULATOR */
#endif /* CONFIG_TUNER */
/* Sound */
Install the single stage synchronous audio initialization I cooked up awhile back. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12693 a1c6a512-1295-4272-9138-f99709370657
2007-03-09 12:30:14 +00:00
#if CONFIG_CODEC != SWCODEC
new SOURCES file that specifies which files to build in each dir, use config.h preprocessor symbols to make conditionals use the GCCOPTS now specified in the root Makefile by configure git-svn-id: svn://svn.rockbox.org/rockbox/trunk@5158 a1c6a512-1295-4272-9138-f99709370657
2004-10-04 13:03:33 +00:00
mp3_playback.c
Install the single stage synchronous audio initialization I cooked up awhile back. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12693 a1c6a512-1295-4272-9138-f99709370657
2007-03-09 12:30:14 +00:00
#endif /* CONFIG_CODEC != SWCODEC */
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
sound.c
#if CONFIG_CODEC == SWCODEC
#ifndef BOOTLOADER
Big Patch adds primarily: Samplerate and format selection to recording for SWCODEC. Supprort for samplerates changing in playback (just goes with the recording part inseparably). Samplerates to all encoders. Encoders can be configured individually on a menu specific to the encoder in the recording menu. File creation is delayed until flush time to reduce spinups when splitting. Misc: statusbar icons for numbers are individual digits to display any number. Audio buffer was rearranged to maximize memory available to recording and properly reinitialized when trashed. ColdFire PCM stuff moved to target tree to avoid a complicated mess when adding samplerate switching. Some needed API changes and to neaten up growing gap between hardware and software codecs. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11452 a1c6a512-1295-4272-9138-f99709370657
2006-11-06 18:07:30 +00:00
pcm_sampr.c
Unify PCM interface just above the hardware driver level for all targets including the sims. Perform lockout of audio callback when changing states. Weird new playback or recording trouble? Check before and after this revision first though things seem quite sound. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15006 a1c6a512-1295-4272-9138-f99709370657
2007-10-06 22:27:27 +00:00
pcm.c
Big Patch adds primarily: Samplerate and format selection to recording for SWCODEC. Supprort for samplerates changing in playback (just goes with the recording part inseparably). Samplerates to all encoders. Encoders can be configured individually on a menu specific to the encoder in the recording menu. File creation is delayed until flush time to reduce spinups when splitting. Misc: statusbar icons for numbers are individual digits to display any number. Audio buffer was rearranged to maximize memory available to recording and properly reinitialized when trashed. ColdFire PCM stuff moved to target tree to avoid a complicated mess when adding samplerate switching. Some needed API changes and to neaten up growing gap between hardware and software codecs. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11452 a1c6a512-1295-4272-9138-f99709370657
2006-11-06 18:07:30 +00:00
#ifdef HAVE_RECORDING
enc_base.c
#endif /* HAVE_RECORDING */
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
#endif /* BOOTLOADER */
#else /* !SWCODEC */
#ifndef BOOTLOADER
#ifndef SIMULATOR
drivers/mas.c
#endif /* SIMULATOR */
#endif /* BOOTLOADER */
#endif /* SWCODEC */
/* Audio codec */
* dont compile audio codec drivers for bootloader, as we dont need them -> saves time * dont include uda1380 in bootloaders * fix to get rid of a nasty humming sound during is not uda1380 specific but iriver specific and so put the fix into the bootloader. An other option was to put audiohw_reset() into target tree... but i want to get rid of audiohw_reset git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15721 a1c6a512-1295-4272-9138-f99709370657
2007-11-20 12:09:59 +00:00
#if !defined(SIMULATOR) && !defined(BOOTLOADER)
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
#if defined(HAVE_UDA1380)
move audio drivers together into a subdir git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13209 a1c6a512-1295-4272-9138-f99709370657
2007-04-19 10:46:50 +00:00
drivers/audio/uda1380.c
Gigabeat: Separate driver for audio codec. Tweak pcm driver to comply with intended interface. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13307 a1c6a512-1295-4272-9138-f99709370657
2007-05-02 22:33:24 +00:00
#elif defined(HAVE_WM8751)
drivers/audio/wm8751.c
Gigabeat S: Implement i2c driver - transmit works but no testing of receiving which will get a chance later. Add some seeds for codec driver. Correct a few #defines. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17254 a1c6a512-1295-4272-9138-f99709370657
2008-04-27 10:30:54 +00:00
#elif defined(HAVE_WM8978)
drivers/audio/wm8978.c
#elif defined(HAVE_WM8975)
move audio drivers together into a subdir git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13209 a1c6a512-1295-4272-9138-f99709370657
2007-04-19 10:46:50 +00:00
drivers/audio/wm8975.c
Initial Cowon D2 commit: * bootloader test program (basic LCD & button drivers, reads touchscreen) * work-in-progress stubs for main build git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16090 a1c6a512-1295-4272-9138-f99709370657
2008-01-14 22:04:48 +00:00
#elif defined(HAVE_WM8985)
drivers/audio/wm8985.c
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
#elif defined(HAVE_WM8758)
move audio drivers together into a subdir git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13209 a1c6a512-1295-4272-9138-f99709370657
2007-04-19 10:46:50 +00:00
drivers/audio/wm8758.c
Have drivers merged for WM8711/21/31 since they are so similar but respect all register differences between codecs. Change minis to #define the actual codec type. If anything breaks check if OSCPD and CLKOUTPD need to be clear for the target- H10 is fine. A nice naming convention suggestion for WM codec multidrivers would be welcome rather than naming for a specific chip. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19367 a1c6a512-1295-4272-9138-f99709370657
2008-12-08 21:09:56 +00:00
#elif defined(HAVE_WM8711) \
|| defined(HAVE_WM8721) \
|| defined(HAVE_WM8731)
Split wm8731 and wm8721 drivers. wm8721 can be much simpler since it has no recording. Provide reg bit definitions for those. Add some temporary hacks pcm-pp to prevent crashing when playing after recording. Make playback start after recording on pp5020. Get wm8731 to monitor recording but plans are to do that digitally. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14948 a1c6a512-1295-4272-9138-f99709370657
2007-10-02 07:48:50 +00:00
drivers/audio/wm8731.c
Sound for Sansa E200 - based on work by myself, Rene Peinthor, Barry Wardell and Christian Gmeiner from the AS3514 datasheet. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12727 a1c6a512-1295-4272-9138-f99709370657
2007-03-11 17:38:08 +00:00
#elif defined(HAVE_AS3514)
move audio drivers together into a subdir git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13209 a1c6a512-1295-4272-9138-f99709370657
2007-04-19 10:46:50 +00:00
drivers/audio/as3514.c
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
#elif defined(HAVE_TLV320)
move audio drivers together into a subdir git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13209 a1c6a512-1295-4272-9138-f99709370657
2007-04-19 10:46:50 +00:00
drivers/audio/tlv320.c
* move audio settings into audio codec drivers * add mas35xx driver for all mas35xx targets. Later mas35xx code from sound.c will move to this new driver git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13464 a1c6a512-1295-4272-9138-f99709370657
2007-05-22 15:56:05 +00:00
#elif defined(HAVE_MAS35XX)
drivers/audio/mas35xx.c
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
#endif /* defined(HAVE_*) */
* dont compile audio codec drivers for bootloader, as we dont need them -> saves time * dont include uda1380 in bootloaders * fix to get rid of a nasty humming sound during is not uda1380 specific but iriver specific and so put the fix into the bootloader. An other option was to put audiohw_reset() into target tree... but i want to get rid of audiohw_reset git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15721 a1c6a512-1295-4272-9138-f99709370657
2007-11-20 12:09:59 +00:00
#endif /* !defined(SIMULATOR) && !defined(BOOTLOADER) */
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
Usb Stack: only setup packet handling, and not enabled by default as there is a lot to do. * settings code is not fully ready -> changing device driver has no effect * clean ups * check copyriths * find a way to detect IN transfers * support for full and highspeed * ... git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14470 a1c6a512-1295-4272-9138-f99709370657
2007-08-27 16:04:32 +00:00
/* USB Stack */
#if !defined(SIMULATOR)
#ifdef HAVE_USBSTACK
New USB stack git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15758 a1c6a512-1295-4272-9138-f99709370657
2007-11-22 20:51:00 +00:00
usbstack/usb_core.c
usbstack/usb_storage.c
Add a working serial driver to usb stack. At the moment it simply echos back what it gets. You can test it on linux by 0) change relevant defines in usb_core.c 1) modprobe usbserial vendor=0x0781 product=0x7421 debug=1 2) picocom /dev/ttyUSB0 3) look at your logf screen if you build with logf support and enabled LOGF_ENABLE define in usb_serial.c I also modified usb_core so that storage and serial both can make use the the 'usb_core'-thread. More will come :) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15850 a1c6a512-1295-4272-9138-f99709370657
2007-11-30 00:13:00 +00:00
usbstack/usb_serial.c
- change the usb class driver framework to allow for device classes with more than one interface or more than one endpoint pair - move the charging-only dummy driver out of usb_core git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17252 a1c6a512-1295-4272-9138-f99709370657
2008-04-26 19:02:16 +00:00
usbstack/usb_charging_only.c
UMS for the Gigabeat S. Bootloader USB mode. Has a couple quirks 1) First plug has problems if cold. Replug if it doesn't connect or not at high speed 2) Linux doesn't like the odd bootable flag value used in the partitions so it won't mount but Windows works. Fix minor OTG driver bugs and clean up device memory handling. Generic name for ARC controller driver. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17154 a1c6a512-1295-4272-9138-f99709370657
2008-04-18 16:42:50 +00:00
#if CONFIG_USBOTG == USBOTG_ARC
target/arm/usb-drv-arc.c
Commit whole Creative Zen Vision:M target tree + all related firmware/ changes. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17241 a1c6a512-1295-4272-9138-f99709370657
2008-04-24 20:08:28 +00:00
#elif CONFIG_USBOTG == USBOTG_ISP1583
drivers/isp1583.c
Usb Stack: only setup packet handling, and not enabled by default as there is a lot to do. * settings code is not fully ready -> changing device driver has no effect * clean ups * check copyriths * find a way to detect IN transfers * support for full and highspeed * ... git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14470 a1c6a512-1295-4272-9138-f99709370657
2007-08-27 16:04:32 +00:00
#endif
Removed a little too much. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15760 a1c6a512-1295-4272-9138-f99709370657
2007-11-22 21:57:17 +00:00
#else /* !defined(HAVE_USBSTACK) */
#if CONFIG_USBOTG == USBOTG_ISP1362
Commit whole Creative Zen Vision:M target tree + all related firmware/ changes. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17241 a1c6a512-1295-4272-9138-f99709370657
2008-04-24 20:08:28 +00:00
drivers/isp1362.c
Removed a little too much. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15760 a1c6a512-1295-4272-9138-f99709370657
2007-11-22 21:57:17 +00:00
#elif CONFIG_USBOTG == USBOTG_M5636
drivers/m5636.c
Usb Stack: only setup packet handling, and not enabled by default as there is a lot to do. * settings code is not fully ready -> changing device driver has no effect * clean ups * check copyriths * find a way to detect IN transfers * support for full and highspeed * ... git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14470 a1c6a512-1295-4272-9138-f99709370657
2007-08-27 16:04:32 +00:00
#endif
Removed a little too much. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15760 a1c6a512-1295-4272-9138-f99709370657
2007-11-22 21:57:17 +00:00
#endif /* !defined(HAVE_USBSTACK) */
#endif /* !defined(SIMULATOR) */
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
start of the tsc2100 driver. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14816 a1c6a512-1295-4272-9138-f99709370657
2007-09-22 14:21:07 +00:00
/* Other Random Hardware */
#ifdef HAVE_TSC2100
get rid of the last mr500 yellow (again :p ) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17273 a1c6a512-1295-4272-9138-f99709370657
2008-04-28 02:19:23 +00:00
#if !defined(SIMULATOR)
start of the tsc2100 driver. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14816 a1c6a512-1295-4272-9138-f99709370657
2007-09-22 14:21:07 +00:00
drivers/tsc2100.c
add more registers for the tsc2100 hopefully working volume control, mute definatly works. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17259 a1c6a512-1295-4272-9138-f99709370657
2008-04-27 13:43:05 +00:00
drivers/audio/tsc2100.c
get rid of the last mr500 yellow (again :p ) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17273 a1c6a512-1295-4272-9138-f99709370657
2008-04-28 02:19:23 +00:00
#endif /* !SIMULATOR */
start of the tsc2100 driver. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14816 a1c6a512-1295-4272-9138-f99709370657
2007-09-22 14:21:07 +00:00
#endif
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
/* CPU Specific - By class then particular chip if applicable */
#if defined(CPU_SH)
#ifndef SIMULATOR
drivers/i2c.c
Moved SH1 ADC to target tree. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13174 a1c6a512-1295-4272-9138-f99709370657
2007-04-15 23:35:56 +00:00
target/sh/adc-sh.c
Move some sh specific assembler files into the target tree git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16516 a1c6a512-1295-4272-9138-f99709370657
2008-03-04 16:02:19 +00:00
target/sh/bitswap.S
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
target/sh/crt0.S
Move kernel tick initialization and handling to the target tree for ones remaining in kernel.c git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18919 a1c6a512-1295-4272-9138-f99709370657
2008-10-29 10:26:46 +00:00
target/sh/kernel-sh.c
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
target/sh/memcpy-sh.S
target/sh/memmove-sh.S
target/sh/memset-sh.S
target/sh/strlen-sh.S
Moved SH1 system code to target tree. * First shot at hwcompat cleanup. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13114 a1c6a512-1295-4272-9138-f99709370657
2007-04-11 23:51:00 +00:00
target/sh/system-sh.c
Move some sh specific assembler files into the target tree git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16516 a1c6a512-1295-4272-9138-f99709370657
2008-03-04 16:02:19 +00:00
target/sh/archos/descramble.S
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
#endif /* SIMULATOR */
#elif defined(CPU_COLDFIRE)
#ifndef SIMULATOR
target/coldfire/crt0.S
Add a complete priority inheritance implementation to the scheduler (all mutex ownership and queue_send calls are inheritable). Priorities are differential so that dispatch depends on the runnable range of priorities. Codec priority can therefore be raised in small steps (pcmbuf updated to enable). Simplify the kernel functions to ease implementation and use the same kernel.c for both sim and target (I'm tired of maintaining two ;_). 1) Not sure if a minor audio break at first buffering issue will exist on large-sector disks (the main mutex speed issue was genuinely resolved earlier). At this point it's best dealt with at the buffering level. It seems a larger filechunk could be used again. 2) Perhaps 64-bit sims will have some minor issues (finicky) but a backroll of the code of concern there is a 5-minute job. All kernel objects become incompatible so a full rebuild and update is needed. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16791 a1c6a512-1295-4272-9138-f99709370657
2008-03-25 02:34:12 +00:00
#ifdef HAVE_PRIORITY_SCHEDULING
common/ffs.c
target/coldfire/ffs-coldfire.S
#endif
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
target/coldfire/memcpy-coldfire.S
target/coldfire/memmove-coldfire.S
target/coldfire/memset-coldfire.S
Simple coldfire assembly strlen() function, 20-25% faster than the c version. Move function out of iram as it turns out that makes it slightly faster. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13713 a1c6a512-1295-4272-9138-f99709370657
2007-06-25 20:21:37 +00:00
target/coldfire/strlen-coldfire.S
More iAudio M3 work. Bootloader compiles, but doesn't work yet. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16645 a1c6a512-1295-4272-9138-f99709370657
2008-03-12 20:35:42 +00:00
#if defined(HAVE_LCD_COLOR) || (LCD_PIXELFORMAT == VERTICAL_INTERLEAVED) \
Added new iAudio M5 target, including some adjustments to make the bootloader compile (with a small change against the committed tools/tonfigure, and it won't actually work yet). git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12588 a1c6a512-1295-4272-9138-f99709370657
2007-03-04 14:09:21 +00:00
|| defined(HAVE_REMOTE_LCD) && (LCD_REMOTE_PIXELFORMAT == VERTICAL_INTERLEAVED)
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
target/coldfire/memset16-coldfire.S
Added new iAudio M5 target, including some adjustments to make the bootloader compile (with a small change against the committed tools/tonfigure, and it won't actually work yet). git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12588 a1c6a512-1295-4272-9138-f99709370657
2007-03-04 14:09:21 +00:00
#endif
Move kernel tick initialization and handling to the target tree for ones remaining in kernel.c git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18919 a1c6a512-1295-4272-9138-f99709370657
2008-10-29 10:26:46 +00:00
target/coldfire/kernel-coldfire.c
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
target/coldfire/system-coldfire.c
#ifndef BOOTLOADER
target/coldfire/pcm-coldfire.c
#endif /* BOOTLOADER */
#if CONFIG_I2C == I2C_COLDFIRE
target/coldfire/i2c-coldfire.c
#endif /* CONFIG_I2C == I2C_COLDFIRE */
#endif /* SIMULATOR */
#elif defined(CPU_PP) || defined(CPU_ARM)
/* CPU_PP => CPU_ARM, CPU_ARM !=> CPU_PP */
ARM optimised memcpy/memmove from glibc. This should give increased performance on all ARM targets, especially iPod 5G git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12000 a1c6a512-1295-4272-9138-f99709370657
2007-01-13 23:57:14 +00:00
target/arm/memcpy-arm.S
target/arm/memmove-arm.S
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
common/strlen.c
#ifndef SIMULATOR
target/arm/memset-arm.S
target/arm/memset16-arm.S
Add a complete priority inheritance implementation to the scheduler (all mutex ownership and queue_send calls are inheritable). Priorities are differential so that dispatch depends on the runnable range of priorities. Codec priority can therefore be raised in small steps (pcmbuf updated to enable). Simplify the kernel functions to ease implementation and use the same kernel.c for both sim and target (I'm tired of maintaining two ;_). 1) Not sure if a minor audio break at first buffering issue will exist on large-sector disks (the main mutex speed issue was genuinely resolved earlier). At this point it's best dealt with at the buffering level. It seems a larger filechunk could be used again. 2) Perhaps 64-bit sims will have some minor issues (finicky) but a backroll of the code of concern there is a 5-minute job. All kernel objects become incompatible so a full rebuild and update is needed. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16791 a1c6a512-1295-4272-9138-f99709370657
2008-03-25 02:34:12 +00:00
#ifdef HAVE_PRIORITY_SCHEDULING
target/arm/ffs-arm.S
#endif
Clean up panicf and introduce system_exception_wait to do further target tasks and wait for a button when an unrecoverable error has occurred (panic, UIE, etc.). Returning from that function should reboot or don't return from it. Move UIE and __div0 for ARM to its own file. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19716 a1c6a512-1295-4272-9138-f99709370657
2009-01-08 10:15:32 +00:00
target/arm/system-arm.c
Change i2c config on e200. Seems to speed things up somewhat. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13403 a1c6a512-1295-4272-9138-f99709370657
2007-05-17 22:49:27 +00:00
#if CONFIG_I2C == I2C_PP5024 || CONFIG_I2C == I2C_PP5020 || CONFIG_I2C == I2C_PP5002
Unify I2C driver for all PortalPlayer targets git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12126 a1c6a512-1295-4272-9138-f99709370657
2007-01-27 17:17:52 +00:00
target/arm/i2c-pp.c
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
#elif CONFIG_I2C == I2C_PNX0101
move to target tree git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13208 a1c6a512-1295-4272-9138-f99709370657
2007-04-19 10:20:54 +00:00
target/arm/pnx0101/i2c-pnx0101.c
Add the Sansa M200 (v1) as a target - it's extremely similar to the Logik DAX (the LCD driver worked unchanged). Plus various tcc77x work, including a working tick interrupt (enabled in the bootloader). Rockbox itself builds for the M200 (there are no keymaps yet for the DAX), but doesn't progress very far due to the lack of an ATA (NAND flash) driver. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17306 a1c6a512-1295-4272-9138-f99709370657
2008-05-02 19:12:09 +00:00
#elif CONFIG_I2C == I2C_TCC780X || CONFIG_I2C == I2C_TCC77X
Initial Cowon D2 commit: * bootloader test program (basic LCD & button drivers, reads touchscreen) * work-in-progress stubs for main build git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16090 a1c6a512-1295-4272-9138-f99709370657
2008-01-14 22:04:48 +00:00
target/arm/i2c-telechips.c
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
#elif CONFIG_I2C == I2C_S3C2440
/* no i2c driver yet */
Patch #5639 by Ulrich Pegelow, inits the M5636 USBOTG chip on the X5 to reduce the battery consumption. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@10208 a1c6a512-1295-4272-9138-f99709370657
2006-07-13 07:40:30 +00:00
#endif
Add preliminary support for the Onda VX747 (MIPS target) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18032 a1c6a512-1295-4272-9138-f99709370657
2008-07-14 15:03:10 +00:00
PNX0101 changes: Make PNX0101-specific system.c and crt0.S. Add new register names from LPC2880 user manual. Add support for timer. Enable CPU frequency changing. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12904 a1c6a512-1295-4272-9138-f99709370657
2007-03-24 19:26:13 +00:00
#if CONFIG_CPU == PNX0101
Move kernel tick initialization and handling to the target tree for ones remaining in kernel.c git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18919 a1c6a512-1295-4272-9138-f99709370657
2008-10-29 10:26:46 +00:00
target/arm/pnx0101/kernel-pnx0101.c
move the iriver ifp7xx and other pnx0101 related files together in the target tree git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13207 a1c6a512-1295-4272-9138-f99709370657
2007-04-19 10:14:55 +00:00
target/arm/pnx0101/system-pnx0101.c
PNX0101 changes: Make PNX0101-specific system.c and crt0.S. Add new register names from LPC2880 user manual. Add support for timer. Enable CPU frequency changing. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12904 a1c6a512-1295-4272-9138-f99709370657
2007-03-24 19:26:13 +00:00
#endif
Add preliminary support for the Onda VX747 (MIPS target) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18032 a1c6a512-1295-4272-9138-f99709370657
2008-07-14 15:03:10 +00:00
Commit FS#9467 - initial work on port to Sansa Clip by Rafaël Carré and François Dinel. A few cosmetic changes were made by me prior to committing: 1) TAB policing in button-clip.c; 2) Add François Dinel to CREDITS; 3) Add François Dinel as (C) holder in button-target.h (it was previously blank); 4) Add Rockbox header to bootloader/sansa_as3525.c with Rafaël Carré as (C) holder; 5) Change target_id to 50 (next available number) in tools/configure and fixed indentation; 6) Change MODEL_NUMBER in config-clip.h to 50 (next available number); 7) Remove unused in/out macros from system-target.h git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18782 a1c6a512-1295-4272-9138-f99709370657
2008-10-12 16:46:01 +00:00
#if CONFIG_CPU == AS3525
target/arm/as3525/system-as3525.c
AS3525: use kernel_init() in bootloader This way creation of scrolling thread doesn't risk crashing the system git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19026 a1c6a512-1295-4272-9138-f99709370657
2008-11-06 02:31:40 +00:00
target/arm/as3525/kernel-as3525.c
Embryo of a SD driver for Sansav2 Debug code included, needed until the bootloader is ready git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18926 a1c6a512-1295-4272-9138-f99709370657
2008-10-29 20:21:59 +00:00
target/arm/as3525/ata_sd_as3525.c
Fix Clip firmware building by adding missing symbols Implement some of the new functions Use as3514 rtc Add AS3525 case in rolo.c Copy card_get_info_target() from ata-sd-pp.c , and use the correct 32bits words order git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19064 a1c6a512-1295-4272-9138-f99709370657
2008-11-10 11:04:43 +00:00
target/arm/as3525/power-as3525.c
target/arm/as3525/usb-as3525.c
Sansa AMS: Use DMA for SD transfers (read and write) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19211 a1c6a512-1295-4272-9138-f99709370657
2008-11-25 13:38:32 +00:00
target/arm/as3525/dma-pl081.c
Renamed as3525-codec.c to ascodec-as3525.c to bring it in line with the naming convention of the other driver files. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19469 a1c6a512-1295-4272-9138-f99709370657
2008-12-17 20:16:20 +00:00
target/arm/as3525/ascodec-as3525.c
Fix Clip firmware building by adding missing symbols Implement some of the new functions Use as3514 rtc Add AS3525 case in rolo.c Copy card_get_info_target() from ata-sd-pp.c , and use the correct 32bits words order git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19064 a1c6a512-1295-4272-9138-f99709370657
2008-11-10 11:04:43 +00:00
#ifndef BOOTLOADER
Group source files common to all current as3525 targets under '#if CONFIG_CPU == AS3525'. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19668 a1c6a512-1295-4272-9138-f99709370657
2009-01-04 15:48:33 +00:00
drivers/generic_i2c.c
Sansa AMS: use the AS3514 ADC driver Move the ADC defines to as3514.h, and make adc-target.h only include as3514.h Implement the missing API (ascodec_readbytes, ascodec_(un)lock) Revert the changes to the PP-specific arm/ascodec-target.h in r19073, use a AS3525 specific ascodec-target.h while moving the AS3514 specific code in export/as3514.h git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19076 a1c6a512-1295-4272-9138-f99709370657
2008-11-10 20:55:56 +00:00
target/arm/adc-as3514.c
Fix Clip firmware building by adding missing symbols Implement some of the new functions Use as3514 rtc Add AS3525 case in rolo.c Copy card_get_info_target() from ata-sd-pp.c , and use the correct 32bits words order git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19064 a1c6a512-1295-4272-9138-f99709370657
2008-11-10 11:04:43 +00:00
target/arm/as3525/audio-as3525.c
target/arm/as3525/debug-as3525.c
Group source files common to all current as3525 targets under '#if CONFIG_CPU == AS3525'. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19668 a1c6a512-1295-4272-9138-f99709370657
2009-01-04 15:48:33 +00:00
target/arm/as3525/fmradio-i2c-as3525.c
target/arm/as3525/i2s-as3525.c
target/arm/as3525/pcm-as3525.c
Fix Clip firmware building by adding missing symbols Implement some of the new functions Use as3514 rtc Add AS3525 case in rolo.c Copy card_get_info_target() from ata-sd-pp.c , and use the correct 32bits words order git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19064 a1c6a512-1295-4272-9138-f99709370657
2008-11-10 11:04:43 +00:00
#endif /* BOOTLOADER */
#endif /* CONFIG_CPU == AS3525 */
Commit FS#9467 - initial work on port to Sansa Clip by Rafaël Carré and François Dinel. A few cosmetic changes were made by me prior to committing: 1) TAB policing in button-clip.c; 2) Add François Dinel to CREDITS; 3) Add François Dinel as (C) holder in button-target.h (it was previously blank); 4) Add Rockbox header to bootloader/sansa_as3525.c with Rafaël Carré as (C) holder; 5) Change target_id to 50 (next available number) in tools/configure and fixed indentation; 6) Change MODEL_NUMBER in config-clip.h to 50 (next available number); 7) Remove unused in/out macros from system-target.h git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18782 a1c6a512-1295-4272-9138-f99709370657
2008-10-12 16:46:01 +00:00
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
#if defined(CPU_PP)
Move kernel tick initialization and handling to the target tree for ones remaining in kernel.c git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18919 a1c6a512-1295-4272-9138-f99709370657
2008-10-29 10:26:46 +00:00
target/arm/kernel-pp.c
Move PortalPlayer system.c code into the target tree. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13239 a1c6a512-1295-4272-9138-f99709370657
2007-04-22 12:03:17 +00:00
#if CONFIG_CPU == PP5002
target/arm/system-pp5002.c
Ooops. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13764 a1c6a512-1295-4272-9138-f99709370657
2007-07-02 05:33:06 +00:00
#elif defined CPU_PP502x
Move PortalPlayer system.c code into the target tree. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13239 a1c6a512-1295-4272-9138-f99709370657
2007-04-22 12:03:17 +00:00
target/arm/system-pp502x.c
#endif
Add working dual-boot bootloaders for H10 and Sansa, which allow booting the OF and Rockbox. Rolo also works. Changes made: Combine bootloader/h10.c and bootloader/e200.c into a common bootloader file (bootloader/main-pp.c) to be used by all mi4 based PortalPlayer targets. The file bootloader/main-pp.c is based off the old bootloader/h10.c with some minor changes to allow it to work on the Sansa too. This effectively adds a Sansa bootloader. Define MODEL_NAME string in config-*.h for use in bootloader. Split crt0-pp.S into separate files for bootloader and normal builds. Bootloader code is now in crt0-pp-bl.S while normal build code stays in crt0-pp.S. Improvements to crt0-pp.S and crt0-pp-bl.S (mostly to make it more multiprocessor safe): * Leave space in bootloader at 0xe0-0xeb since scramble writes over there when it creates the mi4 file (don't leave space for iPods since it's not needed and all code in crt0-pp-bl.S needs to fit before the boot_table at 0x100). * Remove unused DEBUG and STUB code from crt0-pp.S. * Make CPU wait for COP to be sleeping when we put the COP to sleep. * Invalidate COP cache when COP wakes * Flush CPU cache before waking COP * Make sure only the CPU clears the BSS (not the COP) * Make sure only the CPU sets up its own stack (not the COP) Rolo works on H10, so enable it. Make Sansa e200 use rockbox.e200 rather than PP5022.mi4 for 'Normal' builds. This makes updating rockbox simpler as we don't need to go through the firmware update procedure, but rather just put a new rockbox.e200 on the device. rockbox.e200 uses a simple 'add' checksum. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11815 a1c6a512-1295-4272-9138-f99709370657
2006-12-19 11:33:53 +00:00
#ifdef BOOTLOADER
target/arm/crt0-pp-bl.S
#else
FS#6096. Recording on PortalPlayer targets (H10, iPod Video, iPod 4g, iPod Color, iPod Nano). * Fix failed compile of enc_config.c when HAVE_MPEG2_SAMPR is not defined. * Fix bug in AIFF encoder header creation on little endian targets. * Add recording screen keymaps for H10 and iPod. * Move pcm_playback PP specific code to target tree. * Add recording code to wmcodec drivers. * Add pcm_record code. Some problems still remain: * Playback doesn't work after recording until Rockbox is restarted. * Gain control not implemented. * Only 16-bit/44KHz for now. The hardware should be capable of up to 24-bit/96KHz. * Line-in recording not tested on H10. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11794 a1c6a512-1295-4272-9138-f99709370657
2006-12-18 01:52:21 +00:00
target/arm/pcm-pp.c
Sansa c200 port. Rockbox works with sound. Several features are disabled including some lcd options, FM radio, recording, and all plugins. Loading the OF from the Rockbox bootloader does not work. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14625 a1c6a512-1295-4272-9138-f99709370657
2007-09-06 03:28:58 +00:00
#if !defined(SANSA_E200) && !defined(SANSA_C200)
FS#6096. Recording on PortalPlayer targets (H10, iPod Video, iPod 4g, iPod Color, iPod Nano). * Fix failed compile of enc_config.c when HAVE_MPEG2_SAMPR is not defined. * Fix bug in AIFF encoder header creation on little endian targets. * Add recording screen keymaps for H10 and iPod. * Move pcm_playback PP specific code to target tree. * Add recording code to wmcodec drivers. * Add pcm_record code. Some problems still remain: * Playback doesn't work after recording until Rockbox is restarted. * Gain control not implemented. * Only 16-bit/44KHz for now. The hardware should be capable of up to 24-bit/96KHz. * Line-in recording not tested on H10. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11794 a1c6a512-1295-4272-9138-f99709370657
2006-12-18 01:52:21 +00:00
target/arm/audio-pp.c
e200: Add recording. Just from MIC right now and FM integration will happen soon. Most every bit of weirdness is nescessary and no problems seem to exist that the retailos doesn't exhibit too (namely noise when LCD is on when recording from MIC). git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13557 a1c6a512-1295-4272-9138-f99709370657
2007-06-05 07:03:30 +00:00
#endif /* SANSA_E200 */
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
target/arm/crt0-pp.S
Add working dual-boot bootloaders for H10 and Sansa, which allow booting the OF and Rockbox. Rolo also works. Changes made: Combine bootloader/h10.c and bootloader/e200.c into a common bootloader file (bootloader/main-pp.c) to be used by all mi4 based PortalPlayer targets. The file bootloader/main-pp.c is based off the old bootloader/h10.c with some minor changes to allow it to work on the Sansa too. This effectively adds a Sansa bootloader. Define MODEL_NAME string in config-*.h for use in bootloader. Split crt0-pp.S into separate files for bootloader and normal builds. Bootloader code is now in crt0-pp-bl.S while normal build code stays in crt0-pp.S. Improvements to crt0-pp.S and crt0-pp-bl.S (mostly to make it more multiprocessor safe): * Leave space in bootloader at 0xe0-0xeb since scramble writes over there when it creates the mi4 file (don't leave space for iPods since it's not needed and all code in crt0-pp-bl.S needs to fit before the boot_table at 0x100). * Remove unused DEBUG and STUB code from crt0-pp.S. * Make CPU wait for COP to be sleeping when we put the COP to sleep. * Invalidate COP cache when COP wakes * Flush CPU cache before waking COP * Make sure only the CPU clears the BSS (not the COP) * Make sure only the CPU sets up its own stack (not the COP) Rolo works on H10, so enable it. Make Sansa e200 use rockbox.e200 rather than PP5022.mi4 for 'Normal' builds. This makes updating rockbox simpler as we don't need to go through the firmware update procedure, but rather just put a new rockbox.e200 on the device. rockbox.e200 uses a simple 'add' checksum. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11815 a1c6a512-1295-4272-9138-f99709370657
2006-12-19 11:33:53 +00:00
#endif
PNX0101 changes: Make PNX0101-specific system.c and crt0.S. Add new register names from LPC2880 user manual. Add support for timer. Enable CPU frequency changing. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12904 a1c6a512-1295-4272-9138-f99709370657
2007-03-24 19:26:13 +00:00
#elif CONFIG_CPU == PNX0101
move the iriver ifp7xx and other pnx0101 related files together in the target tree git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13207 a1c6a512-1295-4272-9138-f99709370657
2007-04-19 10:14:55 +00:00
target/arm/pnx0101/crt0-pnx0101.S
Seperate the Gigabeat F/X crt0.s, cleanup some #ifdefs in app.lds, add an extra reg to the debug menu. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15579 a1c6a512-1295-4272-9138-f99709370657
2007-11-11 17:58:13 +00:00
#elif CONFIG_CPU==DM320
Move some more files around and get the main build compiling git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14919 a1c6a512-1295-4272-9138-f99709370657
2007-09-30 16:29:21 +00:00
target/arm/tms320dm320/crt0.S
Seperate the Gigabeat F/X crt0.s, cleanup some #ifdefs in app.lds, add an extra reg to the debug menu. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15579 a1c6a512-1295-4272-9138-f99709370657
2007-11-11 17:58:13 +00:00
#elif CONFIG_CPU==S3C2440
target/arm/s3c2440/crt0.S
Initial work on a port to the Logik DAX 1GB MP3/DAB player. The bootloader build compiles and runs (but only displays some debugging info), and the LCD and ADC drivers are working. Two different bootloader builds are possible: 1) The default build is just a test application for uploading to the device via tcctool; 2) Adding -DTCCBOOT to EXTRA_DEFINES in the build directory Makefile will compile the bootloader so that it can be appended to the end of the original firmware and installed on the device, dual-booting. This commit also includes some work by Hein-Pieter van Braam on a port to the iAudio 7, but that doesn't build yet. A large part of these ports will be generic to all TCC77x devices - see the TelechipsInfo wiki page for some other devices with this CPU. NOTE: Compiling these builds requires an arm-elf-gcc with armv5 support - the current version of rockboxdev.sh compiles such a gcc. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15339 a1c6a512-1295-4272-9138-f99709370657
2007-10-28 11:08:10 +00:00
#elif defined(CPU_TCC77X)
target/arm/tcc77x/crt0.S
Initial Cowon D2 commit: * bootloader test program (basic LCD & button drivers, reads touchscreen) * work-in-progress stubs for main build git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16090 a1c6a512-1295-4272-9138-f99709370657
2008-01-14 22:04:48 +00:00
#elif defined(CPU_TCC780X)
target/arm/tcc780x/crt0.S
Gigabeat S memory management stuff. * Moved crt0.S to imx31 subdirectory, as it was the last target using the unified file. * DRAM is now remapped to 0x0, facilitating interrupts (which aren't done yet) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15965 a1c6a512-1295-4272-9138-f99709370657
2007-12-23 12:19:40 +00:00
#elif CONFIG_CPU==IMX31L
target/arm/imx31/crt0.S
Make the meizu m3 load from flash, so interrupts work. More work is needed to get the m6sl "working" again (patch by Denes Balatoni, FS#9499) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18827 a1c6a512-1295-4272-9138-f99709370657
2008-10-18 22:28:59 +00:00
#elif CONFIG_CPU==S5L8700
target/arm/s5l8700/crt0.S
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
#elif defined(CPU_ARM)
target/arm/crt0.S
#endif /* defined(CPU_*) */
#endif /* SIMULATOR */
Add preliminary support for the Onda VX747 (MIPS target) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18032 a1c6a512-1295-4272-9138-f99709370657
2008-07-14 15:03:10 +00:00
#elif defined(CPU_MIPS)
#undef mips
MIPS: * Add assembly optimised variants for memcpy, memset and find_first_set_bit * Add option to map_address in MMU to set caching algorithm git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19920 a1c6a512-1295-4272-9138-f99709370657
2009-02-04 17:33:19 +00:00
/*target/mips/strlen.S*/
Add preliminary support for the Onda VX747 (MIPS target) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18032 a1c6a512-1295-4272-9138-f99709370657
2008-07-14 15:03:10 +00:00
common/memmove.c
common/memset16.c
common/strlen.c
MIPS: * Add assembly optimised variants for memcpy, memset and find_first_set_bit * Add option to map_address in MMU to set caching algorithm git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19920 a1c6a512-1295-4272-9138-f99709370657
2009-02-04 17:33:19 +00:00
target/mips/ffs-mips.S
target/mips/memcpy-mips.S
target/mips/memset-mips.S
Onda VX747: * Get USB working (it isn't good at writing support though) * Clean up NAND & SD a bit * Other comments/fixes Ingenic Jz4740/MIPS: * Split MMU from system git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19815 a1c6a512-1295-4272-9138-f99709370657
2009-01-21 20:58:33 +00:00
target/mips/mmu-mips.c
Add preliminary support for the Onda VX747 (MIPS target) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18032 a1c6a512-1295-4272-9138-f99709370657
2008-07-14 15:03:10 +00:00
#if CONFIG_CPU==JZ4732
target/mips/ingenic_jz47xx/crt0.S
#endif /* CONFIG_CPU == JZ4732 */
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
#else
Add a complete priority inheritance implementation to the scheduler (all mutex ownership and queue_send calls are inheritable). Priorities are differential so that dispatch depends on the runnable range of priorities. Codec priority can therefore be raised in small steps (pcmbuf updated to enable). Simplify the kernel functions to ease implementation and use the same kernel.c for both sim and target (I'm tired of maintaining two ;_). 1) Not sure if a minor audio break at first buffering issue will exist on large-sector disks (the main mutex speed issue was genuinely resolved earlier). At this point it's best dealt with at the buffering level. It seems a larger filechunk could be used again. 2) Perhaps 64-bit sims will have some minor issues (finicky) but a backroll of the code of concern there is a 5-minute job. All kernel objects become incompatible so a full rebuild and update is needed. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16791 a1c6a512-1295-4272-9138-f99709370657
2008-03-25 02:34:12 +00:00
#ifdef HAVE_PRIORITY_SCHEDULING
common/ffs.c
#endif
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
common/memcpy.c
common/memmove.c
common/memset.c
common/memset16.c
common/strlen.c
#ifndef SIMULATOR
crt0.S
drivers/i2c.c
#endif /* SIMULATOR */
#endif /* defined(CPU_*) */
Include the correct source files for iAudio X5 git-svn-id: svn://svn.rockbox.org/rockbox/trunk@8810 a1c6a512-1295-4272-9138-f99709370657
2006-02-23 15:26:43 +00:00
Moved archos LCD aseembler code to target tree. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11478 a1c6a512-1295-4272-9138-f99709370657
2006-11-09 07:31:31 +00:00
#ifdef ARCHOS_PLAYER
#ifndef SIMULATOR
Completed target tree move of the ata driver code. Some code cleanup. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11655 a1c6a512-1295-4272-9138-f99709370657
2006-12-03 22:13:44 +00:00
target/sh/archos/ata-archos.c
target/sh/archos/ata-as-archos.S
Moved archos button reading to target tree. * Cleanup of button.[ch]. * Deactivated serial remote code for recorder FM/V2 as there is no remote pin, saving ~500 bytes of code. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11612 a1c6a512-1295-4272-9138-f99709370657
2006-11-27 02:16:32 +00:00
target/sh/archos/player/button-player.c
Moved SH1 system code to target tree. * First shot at hwcompat cleanup. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13114 a1c6a512-1295-4272-9138-f99709370657
2007-04-11 23:51:00 +00:00
target/sh/archos/player/hwcompat-player.c
Moved archos LCD aseembler code to target tree. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11478 a1c6a512-1295-4272-9138-f99709370657
2006-11-09 07:31:31 +00:00
target/sh/archos/player/lcd-as-player.S
First step of charcell LCD code rework: * Make it fully unicode aware so that adding non-ISO8859-1 scripts becomes possible (limited by the LCD capabilities of course). * Make the API more similar to the bitmap LCD code's API. * Moved hardware dependent parts to target tree. * Simplified code. * Jumpscroll temporarily non-functional. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12916 a1c6a512-1295-4272-9138-f99709370657
2007-03-26 07:52:13 +00:00
target/sh/archos/player/lcd-player.c
Moved archos power handling into target tree. * Tuner power handling cleaned up a bit. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14345 a1c6a512-1295-4272-9138-f99709370657
2007-08-14 22:06:23 +00:00
target/sh/archos/player/power-player.c
First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14375 a1c6a512-1295-4272-9138-f99709370657
2007-08-17 06:45:18 +00:00
target/sh/archos/player/powermgmt-player.c
Moved archos USB handling to target tree. Minor simplification for coldfire (only one usb-target.h). git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13110 a1c6a512-1295-4272-9138-f99709370657
2007-04-11 20:44:32 +00:00
target/sh/archos/player/usb-player.c
Moved archos LCD aseembler code to target tree. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11478 a1c6a512-1295-4272-9138-f99709370657
2006-11-09 07:31:31 +00:00
#endif /* SIMULATOR */
#endif /* ARCHOS_PLAYER */
#ifdef ARCHOS_RECORDER
#ifndef SIMULATOR
Completed target tree move of the ata driver code. Some code cleanup. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11655 a1c6a512-1295-4272-9138-f99709370657
2006-12-03 22:13:44 +00:00
target/sh/archos/ata-archos.c
target/sh/archos/ata-as-archos.S
Split 1 bit LCD code and move appropriate parts to target tree. Only archos code is tested. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11517 a1c6a512-1295-4272-9138-f99709370657
2006-11-12 13:22:59 +00:00
target/sh/archos/lcd-archos-bitmap.c
Moved SH1 ADC to target tree. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13174 a1c6a512-1295-4272-9138-f99709370657
2007-04-15 23:35:56 +00:00
target/sh/archos/lcd-as-archos-bitmap.S
Moved archos button reading to target tree. * Cleanup of button.[ch]. * Deactivated serial remote code for recorder FM/V2 as there is no remote pin, saving ~500 bytes of code. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11612 a1c6a512-1295-4272-9138-f99709370657
2006-11-27 02:16:32 +00:00
target/sh/archos/recorder/button-recorder.c
Moved archos power handling into target tree. * Tuner power handling cleaned up a bit. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14345 a1c6a512-1295-4272-9138-f99709370657
2007-08-14 22:06:23 +00:00
target/sh/archos/recorder/power-recorder.c
First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14375 a1c6a512-1295-4272-9138-f99709370657
2007-08-17 06:45:18 +00:00
target/sh/archos/recorder/powermgmt-recorder.c
Moved archos USB handling to target tree. Minor simplification for coldfire (only one usb-target.h). git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13110 a1c6a512-1295-4272-9138-f99709370657
2007-04-11 20:44:32 +00:00
target/sh/archos/recorder/usb-recorder.c
Moved archos LCD aseembler code to target tree. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11478 a1c6a512-1295-4272-9138-f99709370657
2006-11-09 07:31:31 +00:00
#endif /* SIMULATOR */
#endif /* ARCHOS_RECORDER */
#if defined(ARCHOS_FMRECORDER) || defined(ARCHOS_RECORDERV2)
#ifndef SIMULATOR
Completed target tree move of the ata driver code. Some code cleanup. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11655 a1c6a512-1295-4272-9138-f99709370657
2006-12-03 22:13:44 +00:00
target/sh/archos/ata-archos.c
target/sh/archos/ata-as-archos.S
Split 1 bit LCD code and move appropriate parts to target tree. Only archos code is tested. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11517 a1c6a512-1295-4272-9138-f99709370657
2006-11-12 13:22:59 +00:00
target/sh/archos/lcd-archos-bitmap.c
Moved archos LCD aseembler code to target tree. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11478 a1c6a512-1295-4272-9138-f99709370657
2006-11-09 07:31:31 +00:00
target/sh/archos/lcd-as-archos-bitmap.S
Moved archos button reading to target tree. * Cleanup of button.[ch]. * Deactivated serial remote code for recorder FM/V2 as there is no remote pin, saving ~500 bytes of code. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11612 a1c6a512-1295-4272-9138-f99709370657
2006-11-27 02:16:32 +00:00
target/sh/archos/fm_v2/button-fm_v2.c
Moved archos power handling into target tree. * Tuner power handling cleaned up a bit. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14345 a1c6a512-1295-4272-9138-f99709370657
2007-08-14 22:06:23 +00:00
target/sh/archos/fm_v2/power-fm_v2.c
First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14375 a1c6a512-1295-4272-9138-f99709370657
2007-08-17 06:45:18 +00:00
target/sh/archos/fm_v2/powermgmt-fm_v2.c
Moved archos USB handling to target tree. Minor simplification for coldfire (only one usb-target.h). git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13110 a1c6a512-1295-4272-9138-f99709370657
2007-04-11 20:44:32 +00:00
target/sh/archos/fm_v2/usb-fm_v2.c
Moved archos LCD aseembler code to target tree. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11478 a1c6a512-1295-4272-9138-f99709370657
2006-11-09 07:31:31 +00:00
#endif /* SIMULATOR */
#endif /* ARCHOS_FMRECORDER || ARCHOS_RECORDERV2 */
#if defined(ARCHOS_ONDIOFM) || defined(ARCHOS_ONDIOSP)
#ifndef SIMULATOR
Split 1 bit LCD code and move appropriate parts to target tree. Only archos code is tested. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11517 a1c6a512-1295-4272-9138-f99709370657
2006-11-12 13:22:59 +00:00
target/sh/archos/lcd-archos-bitmap.c
Moved archos LCD aseembler code to target tree. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11478 a1c6a512-1295-4272-9138-f99709370657
2006-11-09 07:31:31 +00:00
target/sh/archos/lcd-as-archos-bitmap.S
Moved archos button reading to target tree. * Cleanup of button.[ch]. * Deactivated serial remote code for recorder FM/V2 as there is no remote pin, saving ~500 bytes of code. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11612 a1c6a512-1295-4272-9138-f99709370657
2006-11-27 02:16:32 +00:00
target/sh/archos/ondio/button-ondio.c
Moved archos power handling into target tree. * Tuner power handling cleaned up a bit. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14345 a1c6a512-1295-4272-9138-f99709370657
2007-08-14 22:06:23 +00:00
target/sh/archos/ondio/power-ondio.c
First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14375 a1c6a512-1295-4272-9138-f99709370657
2007-08-17 06:45:18 +00:00
target/sh/archos/ondio/powermgmt-ondio.c
Moved archos USB handling to target tree. Minor simplification for coldfire (only one usb-target.h). git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13110 a1c6a512-1295-4272-9138-f99709370657
2007-04-11 20:44:32 +00:00
target/sh/archos/ondio/usb-ondio.c
Split radio i2c drivers into target tree where they belong. No changes to binaries produced. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15558 a1c6a512-1295-4272-9138-f99709370657
2007-11-10 19:14:01 +00:00
#if (CONFIG_TUNER & TEA5767)
target/sh/archos/ondio/fmradio_i2c-ondio.c
#endif
Moved archos LCD aseembler code to target tree. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11478 a1c6a512-1295-4272-9138-f99709370657
2006-11-09 07:31:31 +00:00
#endif /* SIMULATOR */
#endif /* ARCHOS_ONDIOFM || ARCHOS_ONDIOFM */
added mostly dummy changes to allow building of a Sansa e200 bootloader without functionality git-svn-id: svn://svn.rockbox.org/rockbox/trunk@10399 a1c6a512-1295-4272-9138-f99709370657
2006-08-01 22:28:14 +00:00
#ifdef SANSA_E200
Allow the Sansa e200 UI simulator to be built. Thanks to Andre Smith for the nice image of the Sansa. Lots more to be done including testing and tweaking the keymaps and modifying the plugins for the Sansa's 176x220 LCD. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11351 a1c6a512-1295-4272-9138-f99709370657
2006-10-26 13:38:09 +00:00
#ifndef SIMULATOR
Preparing for the Philips SA9200 part 1. Move the Sansa ADC & ATA drivers up one level. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17487 a1c6a512-1295-4272-9138-f99709370657
2008-05-13 01:53:19 +00:00
target/arm/adc-as3514.c
Abstract the PortalPlayer AS3514 handling with an "ascodec" API - inspired by the wmcodec API used with the Wolfson codecs. The intention is to implement this API for the AS3525 and then share code with the Sansa V2 ports. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18940 a1c6a512-1295-4272-9138-f99709370657
2008-10-31 00:16:42 +00:00
target/arm/ascodec-pp.c
c200v1/e200v1: Add battery charging. This should be usable on v2 players but those should be evaluated for current, endpoint voltage and whether or not accurate battery readings may always be obtained (which determines algorithm setup and behavior). git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19748 a1c6a512-1295-4272-9138-f99709370657
2009-01-11 10:07:22 +00:00
target/arm/ata-sd-pp.c
target/arm/lcd-as-memframe.S
target/arm/powermgmt-ascodec.c
target/arm/i2s-pp.c
Firewire detection with reboot into diskmode for all iPods that support it (all but Nano and Video). * Hack for compiling iPod G3 removed. * Code cleanup. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14131 a1c6a512-1295-4272-9138-f99709370657
2007-08-01 22:44:02 +00:00
target/arm/usb-fw-pp502x.c
c200v1/e200v1: Add battery charging. This should be usable on v2 players but those should be evaluated for current, endpoint voltage and whether or not accurate battery readings may always be obtained (which determines algorithm setup and behavior). git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19748 a1c6a512-1295-4272-9138-f99709370657
2009-01-11 10:07:22 +00:00
target/arm/sandisk/backlight-c200_e200.c
Move files that will be common to the Sansa e200 and c200 git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14624 a1c6a512-1295-4272-9138-f99709370657
2007-09-06 03:01:41 +00:00
target/arm/sandisk/power-c200_e200.c
c200v1/e200v1: Add battery charging. This should be usable on v2 players but those should be evaluated for current, endpoint voltage and whether or not accurate battery readings may always be obtained (which determines algorithm setup and behavior). git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19748 a1c6a512-1295-4272-9138-f99709370657
2009-01-11 10:07:22 +00:00
target/arm/sandisk/sansa-e200/lcd-e200.c
target/arm/sandisk/sansa-e200/button-e200.c
First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14375 a1c6a512-1295-4272-9138-f99709370657
2007-08-17 06:45:18 +00:00
target/arm/sandisk/sansa-e200/powermgmt-e200.c
e200: Add recording. Just from MIC right now and FM integration will happen soon. Most every bit of weirdness is nescessary and no problems seem to exist that the retailos doesn't exhibit too (namely noise when LCD is on when recording from MIC). git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13557 a1c6a512-1295-4272-9138-f99709370657
2007-06-05 07:03:30 +00:00
#ifndef BOOTLOADER
Move files that will be common to the Sansa e200 and c200 git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14624 a1c6a512-1295-4272-9138-f99709370657
2007-09-06 03:01:41 +00:00
target/arm/sandisk/audio-c200_e200.c
e200: Add recording. Just from MIC right now and FM integration will happen soon. Most every bit of weirdness is nescessary and no problems seem to exist that the retailos doesn't exhibit too (namely noise when LCD is on when recording from MIC). git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13557 a1c6a512-1295-4272-9138-f99709370657
2007-06-05 07:03:30 +00:00
#endif /* BOOTLOADER */
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
#endif /* SIMULATOR */
#endif /* SANSA_E200 */
added mostly dummy changes to allow building of a Sansa e200 bootloader without functionality git-svn-id: svn://svn.rockbox.org/rockbox/trunk@10399 a1c6a512-1295-4272-9138-f99709370657
2006-08-01 22:28:14 +00:00
Sansa c200 port. Rockbox works with sound. Several features are disabled including some lcd options, FM radio, recording, and all plugins. Loading the OF from the Rockbox bootloader does not work. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14625 a1c6a512-1295-4272-9138-f99709370657
2007-09-06 03:28:58 +00:00
#ifdef SANSA_C200
#ifndef SIMULATOR
Preparing for the Philips SA9200 part 1. Move the Sansa ADC & ATA drivers up one level. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17487 a1c6a512-1295-4272-9138-f99709370657
2008-05-13 01:53:19 +00:00
target/arm/adc-as3514.c
Abstract the PortalPlayer AS3514 handling with an "ascodec" API - inspired by the wmcodec API used with the Wolfson codecs. The intention is to implement this API for the AS3525 and then share code with the Sansa V2 ports. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18940 a1c6a512-1295-4272-9138-f99709370657
2008-10-31 00:16:42 +00:00
target/arm/ascodec-pp.c
c200v1/e200v1: Add battery charging. This should be usable on v2 players but those should be evaluated for current, endpoint voltage and whether or not accurate battery readings may always be obtained (which determines algorithm setup and behavior). git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19748 a1c6a512-1295-4272-9138-f99709370657
2009-01-11 10:07:22 +00:00
target/arm/ata-sd-pp.c
target/arm/i2s-pp.c
target/arm/powermgmt-ascodec.c
Sansa c200 port. Rockbox works with sound. Several features are disabled including some lcd options, FM radio, recording, and all plugins. Loading the OF from the Rockbox bootloader does not work. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14625 a1c6a512-1295-4272-9138-f99709370657
2007-09-06 03:28:58 +00:00
target/arm/usb-fw-pp502x.c
c200v1/e200v1: Add battery charging. This should be usable on v2 players but those should be evaluated for current, endpoint voltage and whether or not accurate battery readings may always be obtained (which determines algorithm setup and behavior). git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19748 a1c6a512-1295-4272-9138-f99709370657
2009-01-11 10:07:22 +00:00
target/arm/sandisk/backlight-c200_e200.c
Sansa c200 port. Rockbox works with sound. Several features are disabled including some lcd options, FM radio, recording, and all plugins. Loading the OF from the Rockbox bootloader does not work. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14625 a1c6a512-1295-4272-9138-f99709370657
2007-09-06 03:28:58 +00:00
target/arm/sandisk/power-c200_e200.c
c200v1/e200v1: Add battery charging. This should be usable on v2 players but those should be evaluated for current, endpoint voltage and whether or not accurate battery readings may always be obtained (which determines algorithm setup and behavior). git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19748 a1c6a512-1295-4272-9138-f99709370657
2009-01-11 10:07:22 +00:00
target/arm/sandisk/sansa-c200/lcd-c200.c
target/arm/sandisk/sansa-c200/lcd-as-c200.S
target/arm/sandisk/sansa-c200/button-c200.c
Sansa c200 port. Rockbox works with sound. Several features are disabled including some lcd options, FM radio, recording, and all plugins. Loading the OF from the Rockbox bootloader does not work. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14625 a1c6a512-1295-4272-9138-f99709370657
2007-09-06 03:28:58 +00:00
target/arm/sandisk/sansa-c200/powermgmt-c200.c
#ifndef BOOTLOADER
target/arm/sandisk/audio-c200_e200.c
#endif /* BOOTLOADER */
#endif /* SIMULATOR */
#endif /* SANSA_C200 */
Philips GoGear SA9200 port. Working bootloader and normal builds, including sound. No touchpad now, buttons limited to using vol+/vol-/power for up/down/select. Rockbox USB is enabled since the OF is MTP only...read the warnings on the PortalPlayerUsb wiki page. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17591 a1c6a512-1295-4272-9138-f99709370657
2008-05-21 03:55:17 +00:00
#ifdef PHILIPS_SA9200
#ifndef SIMULATOR
target/arm/adc-as3514.c
Abstract the PortalPlayer AS3514 handling with an "ascodec" API - inspired by the wmcodec API used with the Wolfson codecs. The intention is to implement this API for the AS3525 and then share code with the Sansa V2 ports. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18940 a1c6a512-1295-4272-9138-f99709370657
2008-10-31 00:16:42 +00:00
target/arm/ascodec-pp.c
Make Philips SA9200 build again git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20226 a1c6a512-1295-4272-9138-f99709370657
2009-03-07 04:41:37 +00:00
target/arm/ata-sd-pp.c
target/arm/i2s-pp.c
target/arm/powermgmt-ascodec.c
Philips GoGear SA9200 port. Working bootloader and normal builds, including sound. No touchpad now, buttons limited to using vol+/vol-/power for up/down/select. Rockbox USB is enabled since the OF is MTP only...read the warnings on the PortalPlayerUsb wiki page. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17591 a1c6a512-1295-4272-9138-f99709370657
2008-05-21 03:55:17 +00:00
target/arm/usb-fw-pp502x.c
Make Philips SA9200 build again git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20226 a1c6a512-1295-4272-9138-f99709370657
2009-03-07 04:41:37 +00:00
target/arm/philips/sa9200/backlight-sa9200.c
Philips GoGear SA9200 port. Working bootloader and normal builds, including sound. No touchpad now, buttons limited to using vol+/vol-/power for up/down/select. Rockbox USB is enabled since the OF is MTP only...read the warnings on the PortalPlayerUsb wiki page. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17591 a1c6a512-1295-4272-9138-f99709370657
2008-05-21 03:55:17 +00:00
target/arm/philips/sa9200/button-sa9200.c
Make Philips SA9200 build again git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20226 a1c6a512-1295-4272-9138-f99709370657
2009-03-07 04:41:37 +00:00
target/arm/philips/sa9200/lcd-sa9200.c
Philips GoGear SA9200 port. Working bootloader and normal builds, including sound. No touchpad now, buttons limited to using vol+/vol-/power for up/down/select. Rockbox USB is enabled since the OF is MTP only...read the warnings on the PortalPlayerUsb wiki page. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17591 a1c6a512-1295-4272-9138-f99709370657
2008-05-21 03:55:17 +00:00
target/arm/philips/sa9200/power-sa9200.c
target/arm/philips/sa9200/powermgmt-sa9200.c
#endif /* SIMULATOR */
#endif /* PHILIPS_SA9200 */
My Devcon 2008 contribution: port for Philips GoGear HDD1630 (PP5022-based). Current status is that the bootloader works to load Rockbox, but dual boot does not work: it freezes after decrypting the OF. When Rockbox boots, it freezes somewhere between showing the logo and the main menu. And there's no driver for the touchpad. So lots of work left. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17809 a1c6a512-1295-4272-9138-f99709370657
2008-06-27 18:40:25 +00:00
#ifdef PHILIPS_HDD1630
#ifndef SIMULATOR
Working touchpad for the Philips HDD1630 using the Synaptics driver. Like the m:robe 100, the strip is divided into up, select, and down button regions. You can't swipe like in the OF. The keymap still needs some work. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19480 a1c6a512-1295-4272-9138-f99709370657
2008-12-19 03:31:26 +00:00
#ifndef BOOTLOADER
drivers/synaptics-mep.c
#endif /* BOOTLOADER */
My Devcon 2008 contribution: port for Philips GoGear HDD1630 (PP5022-based). Current status is that the bootloader works to load Rockbox, but dual boot does not work: it freezes after decrypting the OF. When Rockbox boots, it freezes somewhere between showing the logo and the main menu. And there's no driver for the touchpad. So lots of work left. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17809 a1c6a512-1295-4272-9138-f99709370657
2008-06-27 18:40:25 +00:00
target/arm/ata-as-arm.S
target/arm/ata-pp5020.c
target/arm/wmcodec-pp.c
target/arm/i2s-pp.c
target/arm/adc-pp5020.c
target/arm/philips/hdd1630/backlight-hdd1630.c
target/arm/philips/hdd1630/button-hdd1630.c
FM radio for Philips HDD1630. Volume was very faint unless recording was enabled, so do that too. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19996 a1c6a512-1295-4272-9138-f99709370657
2009-02-13 03:49:17 +00:00
target/arm/philips/hdd1630/fmradio_i2c-hdd1630.c
My Devcon 2008 contribution: port for Philips GoGear HDD1630 (PP5022-based). Current status is that the bootloader works to load Rockbox, but dual boot does not work: it freezes after decrypting the OF. When Rockbox boots, it freezes somewhere between showing the logo and the main menu. And there's no driver for the touchpad. So lots of work left. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17809 a1c6a512-1295-4272-9138-f99709370657
2008-06-27 18:40:25 +00:00
target/arm/philips/hdd1630/lcd-hdd1630.c
Philips HDD1630 - add LCD YUV functions so mpegplayer works. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19997 a1c6a512-1295-4272-9138-f99709370657
2009-02-13 04:10:57 +00:00
target/arm/philips/hdd1630/lcd-as-hdd1630.S
My Devcon 2008 contribution: port for Philips GoGear HDD1630 (PP5022-based). Current status is that the bootloader works to load Rockbox, but dual boot does not work: it freezes after decrypting the OF. When Rockbox boots, it freezes somewhere between showing the logo and the main menu. And there's no driver for the touchpad. So lots of work left. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17809 a1c6a512-1295-4272-9138-f99709370657
2008-06-27 18:40:25 +00:00
target/arm/philips/hdd1630/power-hdd1630.c
target/arm/philips/hdd1630/powermgmt-hdd1630.c
target/arm/usb-fw-pp502x.c
#endif /* SIMULATOR */
#endif /* PHILIPS_HDD1630 */
Include the correct source files for iAudio X5 git-svn-id: svn://svn.rockbox.org/rockbox/trunk@8810 a1c6a512-1295-4272-9138-f99709370657
2006-02-23 15:26:43 +00:00
#ifdef IAUDIO_X5
iAudio X5: Fix sim build git-svn-id: svn://svn.rockbox.org/rockbox/trunk@10274 a1c6a512-1295-4272-9138-f99709370657
2006-07-21 09:24:17 +00:00
#ifndef SIMULATOR
Completed target tree move of the ata driver code. Some code cleanup. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11655 a1c6a512-1295-4272-9138-f99709370657
2006-12-03 22:13:44 +00:00
target/coldfire/ata-as-coldfire.S
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
target/coldfire/pcf50606-coldfire.c
Bring up the M5 port to a working stage: Extended numerous explicit checks for IAUDIO_X5 to also check for IAUDIO_M5, moved code around the target tree, added preliminary background for the sim. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12610 a1c6a512-1295-4272-9138-f99709370657
2007-03-05 00:04:00 +00:00
target/coldfire/iaudio/adc-iaudio.c
target/coldfire/iaudio/ata-iaudio.c
Back-ported the iAudio remote LCD driver optimisations to X5 and M5. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16810 a1c6a512-1295-4272-9138-f99709370657
2008-03-26 00:38:40 +00:00
target/coldfire/iaudio/lcd-remote-as-iaudio.S
Bring up the M5 port to a working stage: Extended numerous explicit checks for IAUDIO_X5 to also check for IAUDIO_M5, moved code around the target tree, added preliminary background for the sim. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12610 a1c6a512-1295-4272-9138-f99709370657
2007-03-05 00:04:00 +00:00
target/coldfire/iaudio/lcd-remote-iaudio.c
target/coldfire/iaudio/pcf50606-iaudio.c
First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14375 a1c6a512-1295-4272-9138-f99709370657
2007-08-17 06:45:18 +00:00
target/coldfire/iaudio/powermgmt-iaudio.c
Bring up the M5 port to a working stage: Extended numerous explicit checks for IAUDIO_X5 to also check for IAUDIO_M5, moved code around the target tree, added preliminary background for the sim. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12610 a1c6a512-1295-4272-9138-f99709370657
2007-03-05 00:04:00 +00:00
target/coldfire/iaudio/system-iaudio.c
target/coldfire/iaudio/usb-iaudio.c
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
target/coldfire/iaudio/x5/backlight-x5.c
Moved the X5 button driver to the target tree git-svn-id: svn://svn.rockbox.org/rockbox/trunk@10339 a1c6a512-1295-4272-9138-f99709370657
2006-07-27 13:27:31 +00:00
target/coldfire/iaudio/x5/button-x5.c
iAudio X5: Enable reading of DS2411 serial number. See it under System|Debug|View HW info. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12723 a1c6a512-1295-4272-9138-f99709370657
2007-03-11 13:59:31 +00:00
target/coldfire/iaudio/x5/ds2411-x5.c
Split radio i2c drivers into target tree where they belong. No changes to binaries produced. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15558 a1c6a512-1295-4272-9138-f99709370657
2007-11-10 19:14:01 +00:00
target/coldfire/iaudio/x5/fmradio_i2c-x5.c
Accepted FS#5807 by Michael Sevakis - ASM optimized lcd_update(). git-svn-id: svn://svn.rockbox.org/rockbox/trunk@10564 a1c6a512-1295-4272-9138-f99709370657
2006-08-13 21:28:22 +00:00
target/coldfire/iaudio/x5/lcd-as-x5.S
Include the correct source files for iAudio X5 git-svn-id: svn://svn.rockbox.org/rockbox/trunk@8810 a1c6a512-1295-4272-9138-f99709370657
2006-02-23 15:26:43 +00:00
target/coldfire/iaudio/x5/lcd-x5.c
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
target/coldfire/iaudio/x5/m5636-x5.c
The target power handling code isn't meant to be compiled for the sim. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14346 a1c6a512-1295-4272-9138-f99709370657
2007-08-14 22:23:15 +00:00
target/coldfire/iaudio/x5/power-x5.c
iAudio/iRiver: Bootloader should not compile the audio-*.c files. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11581 a1c6a512-1295-4272-9138-f99709370657
2006-11-24 06:53:33 +00:00
#ifndef BOOTLOADER
target/coldfire/iaudio/x5/audio-x5.c
#endif
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
#endif /* SIMULATOR */
#endif /* IAUDIO_X5 */
Added new iAudio M5 target, including some adjustments to make the bootloader compile (with a small change against the committed tools/tonfigure, and it won't actually work yet). git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12588 a1c6a512-1295-4272-9138-f99709370657
2007-03-04 14:09:21 +00:00
#ifdef IAUDIO_M5
#ifndef SIMULATOR
target/coldfire/ata-as-coldfire.S
target/coldfire/pcf50606-coldfire.c
Bring up the M5 port to a working stage: Extended numerous explicit checks for IAUDIO_X5 to also check for IAUDIO_M5, moved code around the target tree, added preliminary background for the sim. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12610 a1c6a512-1295-4272-9138-f99709370657
2007-03-05 00:04:00 +00:00
target/coldfire/iaudio/adc-iaudio.c
target/coldfire/iaudio/ata-iaudio.c
Back-ported the iAudio remote LCD driver optimisations to X5 and M5. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16810 a1c6a512-1295-4272-9138-f99709370657
2008-03-26 00:38:40 +00:00
target/coldfire/iaudio/lcd-remote-as-iaudio.S
Bring up the M5 port to a working stage: Extended numerous explicit checks for IAUDIO_X5 to also check for IAUDIO_M5, moved code around the target tree, added preliminary background for the sim. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12610 a1c6a512-1295-4272-9138-f99709370657
2007-03-05 00:04:00 +00:00
target/coldfire/iaudio/lcd-remote-iaudio.c
target/coldfire/iaudio/m5/backlight-m5.c
target/coldfire/iaudio/m5/button-m5.c
target/coldfire/iaudio/m5/lcd-as-m5.S
target/coldfire/iaudio/m5/lcd-m5.c
The target power handling code isn't meant to be compiled for the sim. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14346 a1c6a512-1295-4272-9138-f99709370657
2007-08-14 22:23:15 +00:00
target/coldfire/iaudio/m5/power-m5.c
Bring up the M5 port to a working stage: Extended numerous explicit checks for IAUDIO_X5 to also check for IAUDIO_M5, moved code around the target tree, added preliminary background for the sim. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12610 a1c6a512-1295-4272-9138-f99709370657
2007-03-05 00:04:00 +00:00
target/coldfire/iaudio/pcf50606-iaudio.c
First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14375 a1c6a512-1295-4272-9138-f99709370657
2007-08-17 06:45:18 +00:00
target/coldfire/iaudio/powermgmt-iaudio.c
Bring up the M5 port to a working stage: Extended numerous explicit checks for IAUDIO_X5 to also check for IAUDIO_M5, moved code around the target tree, added preliminary background for the sim. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12610 a1c6a512-1295-4272-9138-f99709370657
2007-03-05 00:04:00 +00:00
target/coldfire/iaudio/system-iaudio.c
target/coldfire/iaudio/usb-iaudio.c
Added new iAudio M5 target, including some adjustments to make the bootloader compile (with a small change against the committed tools/tonfigure, and it won't actually work yet). git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12588 a1c6a512-1295-4272-9138-f99709370657
2007-03-04 14:09:21 +00:00
#ifndef BOOTLOADER
Bring up the M5 port to a working stage: Extended numerous explicit checks for IAUDIO_X5 to also check for IAUDIO_M5, moved code around the target tree, added preliminary background for the sim. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12610 a1c6a512-1295-4272-9138-f99709370657
2007-03-05 00:04:00 +00:00
target/coldfire/iaudio/m5/audio-m5.c
Added new iAudio M5 target, including some adjustments to make the bootloader compile (with a small change against the committed tools/tonfigure, and it won't actually work yet). git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12588 a1c6a512-1295-4272-9138-f99709370657
2007-03-04 14:09:21 +00:00
#endif
#endif /* SIMULATOR */
#endif /* IAUDIO_M5 */
More iAudio M3 work. Bootloader compiles, but doesn't work yet. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16645 a1c6a512-1295-4272-9138-f99709370657
2008-03-12 20:35:42 +00:00
#ifdef IAUDIO_M3
#ifndef SIMULATOR
target/coldfire/ata-as-coldfire.S
More iAudio M3 work. Target build compiles, but same problem regarding plugins as the simulator. Boots to the menu, but it can't be used yet because only main & remote Play button work. USB works. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16660 a1c6a512-1295-4272-9138-f99709370657
2008-03-14 08:54:54 +00:00
target/coldfire/iaudio/m3/adc-m3.c
Make ATA work on M3. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16650 a1c6a512-1295-4272-9138-f99709370657
2008-03-12 23:36:05 +00:00
target/coldfire/iaudio/m3/ata-m3.c
More iAudio M3 work. Bootloader compiles, but doesn't work yet. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16645 a1c6a512-1295-4272-9138-f99709370657
2008-03-12 20:35:42 +00:00
target/coldfire/iaudio/m3/backlight-m3.c
target/coldfire/iaudio/m3/button-m3.c
More iAudio M3 work. Target build compiles, but same problem regarding plugins as the simulator. Boots to the menu, but it can't be used yet because only main & remote Play button work. USB works. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16660 a1c6a512-1295-4272-9138-f99709370657
2008-03-14 08:54:54 +00:00
target/coldfire/iaudio/m3/fmradio_i2c-m3.c
More iAudio M3 work. Bootloader compiles, but doesn't work yet. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16645 a1c6a512-1295-4272-9138-f99709370657
2008-03-12 20:35:42 +00:00
target/coldfire/iaudio/m3/lcd-m3.c
iAudio M3: Optimised LCD driver, with more/better assembly code. Speedup is ~80% when boosted, ~15% when unboosted. Also implemented grey phase blitting. * Adapted the greyscale library, and the plugins using it. * Fixed a bug in greyscale scroll down for vertically packed pixels. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16809 a1c6a512-1295-4272-9138-f99709370657
2008-03-25 23:21:36 +00:00
target/coldfire/iaudio/m3/lcd-as-m3.S
More iAudio M3 work. Bootloader compiles, but doesn't work yet. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16645 a1c6a512-1295-4272-9138-f99709370657
2008-03-12 20:35:42 +00:00
target/coldfire/iaudio/m3/power-m3.c
iAudio M3: ADC driver, making buttons and battery voltage reading work. * Disable the multi-colour LED for now to save power. Proper handling will be added later. * Make reboot on button press work on iAudio X5, M5, M3 in panicf(), and on M3 in UIE(). git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16684 a1c6a512-1295-4272-9138-f99709370657
2008-03-17 00:19:23 +00:00
target/coldfire/iaudio/m3/powermgmt-m3.c
More iAudio M3 work. Bootloader compiles, but doesn't work yet. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16645 a1c6a512-1295-4272-9138-f99709370657
2008-03-12 20:35:42 +00:00
target/coldfire/iaudio/m3/system-m3.c
More iAudio M3 work. Target build compiles, but same problem regarding plugins as the simulator. Boots to the menu, but it can't be used yet because only main & remote Play button work. USB works. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16660 a1c6a512-1295-4272-9138-f99709370657
2008-03-14 08:54:54 +00:00
target/coldfire/iaudio/m3/usb-m3.c
#ifndef BOOTLOADER
target/coldfire/iaudio/m3/audio-m3.c
#endif
More iAudio M3 work. Bootloader compiles, but doesn't work yet. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16645 a1c6a512-1295-4272-9138-f99709370657
2008-03-12 20:35:42 +00:00
#endif /* SIMULATOR */
#endif /* IAUDIO_M3 */
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
#ifdef IRIVER_IFP7XX_SERIES
#ifdef STUB
move the ifp7xx usb serial driver files to more specific names, to make the "usb_serial" name available for more general usb class driver use git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16484 a1c6a512-1295-4272-9138-f99709370657
2008-03-02 18:16:24 +00:00
ifp_usb_serial.c
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
common/sscanf.c
#endif /* STUB */
#endif /* IRIVER_IFP7XX_SERIES */
H10 is a target_tree target git-svn-id: svn://svn.rockbox.org/rockbox/trunk@10449 a1c6a512-1295-4272-9138-f99709370657
2006-08-03 20:21:55 +00:00
move the iriver h1x0/h3x0 targets to the target tree git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11392 a1c6a512-1295-4272-9138-f99709370657
2006-10-30 08:56:06 +00:00
#ifdef IRIVER_H300_SERIES
oops, two files didnt get commited git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11381 a1c6a512-1295-4272-9138-f99709370657
2006-10-29 10:32:50 +00:00
#ifndef SIMULATOR
Completed target tree move of the ata driver code. Some code cleanup. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11655 a1c6a512-1295-4272-9138-f99709370657
2006-12-03 22:13:44 +00:00
target/coldfire/ata-as-coldfire.S
move the iriver h1x0/h3x0 targets to the target tree git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11392 a1c6a512-1295-4272-9138-f99709370657
2006-10-30 08:56:06 +00:00
target/coldfire/pcf50606-coldfire.c
target/coldfire/iriver/ata-iriver.c
Move target specific parts of the H100 remote LCD driver to target tree. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12485 a1c6a512-1295-4272-9138-f99709370657
2007-02-25 22:09:14 +00:00
target/coldfire/iriver/lcd-remote-iriver.c
Iriver remote LCD driver: * Split out assembler parts. * Reintroduced the 2 transfer routine variants (low/high CPU clock), and made the version for high CPU clock a little slower because there were problems reported. The function can be slowed down more if there are still problems. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17006 a1c6a512-1295-4272-9138-f99709370657
2008-04-06 23:57:37 +00:00
target/coldfire/iriver/lcd-remote-as-iriver.S
move the iriver h1x0/h3x0 targets to the target tree git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11392 a1c6a512-1295-4272-9138-f99709370657
2006-10-30 08:56:06 +00:00
target/coldfire/iriver/system-iriver.c
Split radio i2c drivers into target tree where they belong. No changes to binaries produced. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15558 a1c6a512-1295-4272-9138-f99709370657
2007-11-10 19:14:01 +00:00
target/coldfire/iriver/fmradio_i2c-iriver.c
FS#6419 - driver for H1x0 series RTC Mod with runtime detection git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12520 a1c6a512-1295-4272-9138-f99709370657
2007-02-28 13:20:36 +00:00
target/coldfire/iriver/h300/sw_i2c-h300.c
move the iriver h1x0/h3x0 targets to the target tree git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11392 a1c6a512-1295-4272-9138-f99709370657
2006-10-30 08:56:06 +00:00
target/coldfire/iriver/h300/adc-h300.c
target/coldfire/iriver/h300/backlight-h300.c
target/coldfire/iriver/h300/button-h300.c
target/coldfire/iriver/h300/pcf50606-h300.c
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
target/coldfire/iriver/h300/lcd-as-h300.S
target/coldfire/iriver/h300/lcd-h300.c
The target power handling code isn't meant to be compiled for the sim. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14346 a1c6a512-1295-4272-9138-f99709370657
2007-08-14 22:23:15 +00:00
target/coldfire/iriver/h300/power-h300.c
First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14375 a1c6a512-1295-4272-9138-f99709370657
2007-08-17 06:45:18 +00:00
target/coldfire/iriver/h300/powermgmt-h300.c
move the iriver h1x0/h3x0 targets to the target tree git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11392 a1c6a512-1295-4272-9138-f99709370657
2006-10-30 08:56:06 +00:00
target/coldfire/iriver/h300/usb-h300.c
iAudio/iRiver: Bootloader should not compile the audio-*.c files. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11581 a1c6a512-1295-4272-9138-f99709370657
2006-11-24 06:53:33 +00:00
#ifndef BOOTLOADER
target/coldfire/iriver/audio-iriver.c
#endif
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
#endif /* SIMULATOR */
#endif /* IRIVER_H300_SERIES */
oops, two files didnt get commited git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11381 a1c6a512-1295-4272-9138-f99709370657
2006-10-29 10:32:50 +00:00
move the iriver h1x0/h3x0 targets to the target tree git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11392 a1c6a512-1295-4272-9138-f99709370657
2006-10-30 08:56:06 +00:00
#ifdef IRIVER_H100_SERIES
Ooops, the sim doesn't understand coldfire asm... git-svn-id: svn://svn.rockbox.org/rockbox/trunk@10725 a1c6a512-1295-4272-9138-f99709370657
2006-08-23 17:49:19 +00:00
#ifndef SIMULATOR
mrobe 100: real time clock (if anybody recognises the RTC chip let me know) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16208 a1c6a512-1295-4272-9138-f99709370657
2008-02-03 18:15:39 +00:00
drivers/sw_i2c.c
Completed target tree move of the ata driver code. Some code cleanup. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11655 a1c6a512-1295-4272-9138-f99709370657
2006-12-03 22:13:44 +00:00
target/coldfire/ata-as-coldfire.S
move the iriver h1x0/h3x0 targets to the target tree git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11392 a1c6a512-1295-4272-9138-f99709370657
2006-10-30 08:56:06 +00:00
target/coldfire/iriver/ata-iriver.c
Move target specific parts of the H100 remote LCD driver to target tree. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12485 a1c6a512-1295-4272-9138-f99709370657
2007-02-25 22:09:14 +00:00
target/coldfire/iriver/lcd-remote-iriver.c
Iriver remote LCD driver: * Split out assembler parts. * Reintroduced the 2 transfer routine variants (low/high CPU clock), and made the version for high CPU clock a little slower because there were problems reported. The function can be slowed down more if there are still problems. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17006 a1c6a512-1295-4272-9138-f99709370657
2008-04-06 23:57:37 +00:00
target/coldfire/iriver/lcd-remote-as-iriver.S
move the iriver h1x0/h3x0 targets to the target tree git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11392 a1c6a512-1295-4272-9138-f99709370657
2006-10-30 08:56:06 +00:00
target/coldfire/iriver/system-iriver.c
Split radio i2c drivers into target tree where they belong. No changes to binaries produced. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15558 a1c6a512-1295-4272-9138-f99709370657
2007-11-10 19:14:01 +00:00
target/coldfire/iriver/fmradio_i2c-iriver.c
move the iriver h1x0/h3x0 targets to the target tree git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11392 a1c6a512-1295-4272-9138-f99709370657
2006-10-30 08:56:06 +00:00
target/coldfire/iriver/h100/adc-h100.c
target/coldfire/iriver/h100/backlight-h100.c
target/coldfire/iriver/h100/button-h100.c
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
target/coldfire/iriver/h100/lcd-as-h100.S
H100/120: Split lcd driver into pixel format and device specific parts. Adjustment of contrast range to just a little less than white to a little more than black. Really only had to reset minimum. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11487 a1c6a512-1295-4272-9138-f99709370657
2006-11-10 00:02:28 +00:00
target/coldfire/iriver/h100/lcd-h100.c
The target power handling code isn't meant to be compiled for the sim. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14346 a1c6a512-1295-4272-9138-f99709370657
2007-08-14 22:23:15 +00:00
target/coldfire/iriver/h100/power-h100.c
First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14375 a1c6a512-1295-4272-9138-f99709370657
2007-08-17 06:45:18 +00:00
target/coldfire/iriver/h100/powermgmt-h100.c
H100/General: HAL for S/PDIF and refinement/bufixes in optical output powering/source selection. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11523 a1c6a512-1295-4272-9138-f99709370657
2006-11-13 23:21:54 +00:00
#ifndef BOOTLOADER
iAudio/iRiver: Bootloader should not compile the audio-*.c files. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11581 a1c6a512-1295-4272-9138-f99709370657
2006-11-24 06:53:33 +00:00
target/coldfire/iriver/audio-iriver.c
H100/General: HAL for S/PDIF and refinement/bufixes in optical output powering/source selection. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11523 a1c6a512-1295-4272-9138-f99709370657
2006-11-13 23:21:54 +00:00
target/coldfire/iriver/h100/spdif-h100.c
#endif
move the iriver h1x0/h3x0 targets to the target tree git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11392 a1c6a512-1295-4272-9138-f99709370657
2006-10-30 08:56:06 +00:00
target/coldfire/iriver/h100/usb-h100.c
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
#endif /* SIMULATOR */
#endif /* IRIVER_H100_SERIES */
H300: * Assembler optimised lcd_yuv_blit(), based on the X5 version. 23..31% speedup in tests depending on video size. * Don't set HORIZ_RAM_ADDR_POS for LCD updates, it's unnecessary. * Started the target tree move for H300 with this. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@10724 a1c6a512-1295-4272-9138-f99709370657
2006-08-23 17:30:51 +00:00
H10 is a target_tree target git-svn-id: svn://svn.rockbox.org/rockbox/trunk@10449 a1c6a512-1295-4272-9138-f99709370657
2006-08-03 20:21:55 +00:00
#ifdef IRIVER_H10
#ifndef SIMULATOR
Assembler optimised ATA transfer loops for ARM targets. Only used for PP5020/5021/5022 targets atm. PP5002 seems to have problems with it not directly related to the asm code itself, and the gigabeat doesn't profit from it, probably because the CPU isn't the bottleneck even without optimisation. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12099 a1c6a512-1295-4272-9138-f99709370657
2007-01-24 00:12:08 +00:00
target/arm/ata-as-arm.S
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
target/arm/ata-pp5020.c
target/arm/wmcodec-pp.c
Move I2S initialisation out of the Wolfson codec driver git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11700 a1c6a512-1295-4272-9138-f99709370657
2006-12-09 19:18:18 +00:00
target/arm/i2s-pp.c
- share adc reading code between h10 and mrobe100 - battery voltage calibrated and used for mrobe100 git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16064 a1c6a512-1295-4272-9138-f99709370657
2008-01-12 20:36:45 +00:00
target/arm/adc-pp5020.c
H10 is a target_tree target git-svn-id: svn://svn.rockbox.org/rockbox/trunk@10449 a1c6a512-1295-4272-9138-f99709370657
2006-08-03 20:21:55 +00:00
target/arm/iriver/h10/backlight-h10.c
target/arm/iriver/h10/button-h10.c
FS#8046: H10 FM tuner support. Thanks to Przemyslaw Holubowski for doing the hard work in figuring out how to communicate with the tuner. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15578 a1c6a512-1295-4272-9138-f99709370657
2007-11-11 16:00:33 +00:00
target/arm/iriver/h10/fmradio_i2c-h10.c
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
target/arm/iriver/h10/lcd-h10_20gb.c
H10 20GB: Assembly YUV blitting and dithering. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16171 a1c6a512-1295-4272-9138-f99709370657
2008-01-26 14:24:09 +00:00
target/arm/iriver/h10/lcd-as-h10.S
H10 is a target_tree target git-svn-id: svn://svn.rockbox.org/rockbox/trunk@10449 a1c6a512-1295-4272-9138-f99709370657
2006-08-03 20:21:55 +00:00
target/arm/iriver/h10/power-h10.c
First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14375 a1c6a512-1295-4272-9138-f99709370657
2007-08-17 06:45:18 +00:00
target/arm/iriver/h10/powermgmt-h10.c
Firewire detection with reboot into diskmode for all iPods that support it (all but Nano and Video). * Hack for compiling iPod G3 removed. * Code cleanup. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14131 a1c6a512-1295-4272-9138-f99709370657
2007-08-01 22:44:02 +00:00
target/arm/usb-fw-pp502x.c
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
#endif /* SIMULATOR */
#endif /* IRIVER_H10 */
update the gigabeat code and move to target_tree git-svn-id: svn://svn.rockbox.org/rockbox/trunk@10535 a1c6a512-1295-4272-9138-f99709370657
2006-08-12 08:01:54 +00:00
Add new build target for iriver H10 5/6Gb. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@10661 a1c6a512-1295-4272-9138-f99709370657
2006-08-19 19:21:17 +00:00
#ifdef IRIVER_H10_5GB
#ifndef SIMULATOR
Assembler optimised ATA transfer loops for ARM targets. Only used for PP5020/5021/5022 targets atm. PP5002 seems to have problems with it not directly related to the asm code itself, and the gigabeat doesn't profit from it, probably because the CPU isn't the bottleneck even without optimisation. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12099 a1c6a512-1295-4272-9138-f99709370657
2007-01-24 00:12:08 +00:00
target/arm/ata-as-arm.S
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
target/arm/ata-pp5020.c
target/arm/wmcodec-pp.c
Move I2S initialisation out of the Wolfson codec driver git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11700 a1c6a512-1295-4272-9138-f99709370657
2006-12-09 19:18:18 +00:00
target/arm/i2s-pp.c
- share adc reading code between h10 and mrobe100 - battery voltage calibrated and used for mrobe100 git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16064 a1c6a512-1295-4272-9138-f99709370657
2008-01-12 20:36:45 +00:00
target/arm/adc-pp5020.c
Add new build target for iriver H10 5/6Gb. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@10661 a1c6a512-1295-4272-9138-f99709370657
2006-08-19 19:21:17 +00:00
target/arm/iriver/h10/backlight-h10.c
target/arm/iriver/h10/button-h10.c
FS#8046: H10 FM tuner support. Thanks to Przemyslaw Holubowski for doing the hard work in figuring out how to communicate with the tuner. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15578 a1c6a512-1295-4272-9138-f99709370657
2007-11-11 16:00:33 +00:00
target/arm/iriver/h10/fmradio_i2c-h10.c
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
target/arm/iriver/h10/lcd-h10_5gb.c
Add new build target for iriver H10 5/6Gb. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@10661 a1c6a512-1295-4272-9138-f99709370657
2006-08-19 19:21:17 +00:00
target/arm/iriver/h10/power-h10.c
First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14375 a1c6a512-1295-4272-9138-f99709370657
2007-08-17 06:45:18 +00:00
target/arm/iriver/h10/powermgmt-h10.c
Firewire detection with reboot into diskmode for all iPods that support it (all but Nano and Video). * Hack for compiling iPod G3 removed. * Code cleanup. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14131 a1c6a512-1295-4272-9138-f99709370657
2007-08-01 22:44:02 +00:00
target/arm/usb-fw-pp502x.c
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
#endif /* SIMULATOR */
#endif /* IRIVER_H10_5GB */
Add new build target for iriver H10 5/6Gb. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@10661 a1c6a512-1295-4272-9138-f99709370657
2006-08-19 19:21:17 +00:00
update the gigabeat code and move to target_tree git-svn-id: svn://svn.rockbox.org/rockbox/trunk@10535 a1c6a512-1295-4272-9138-f99709370657
2006-08-12 08:01:54 +00:00
#ifdef GIGABEAT_F
#ifndef SIMULATOR
Dithering option for mpegplayer on gigabeat-f/x and e200. Assembly IDCT for ARm just to make it all work more nicely. Move UI simulator YUV code to its core to adapt it. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14851 a1c6a512-1295-4272-9138-f99709370657
2007-09-25 02:59:42 +00:00
target/arm/lcd-as-memframe.S
Refine the routines in mmu-arm.c and move them to mmu-arm.S since the code is now 100% assembly. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19980 a1c6a512-1295-4272-9138-f99709370657
2009-02-11 23:56:00 +00:00
target/arm/mmu-arm.S
Fix the Gigabeat red and move it's hw specific code into the target tree git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15562 a1c6a512-1295-4272-9138-f99709370657
2007-11-10 23:13:27 +00:00
target/arm/s3c2440/debug-s3c2440.c
move the Gigabeat from gigabeat/meg-fx to s3c2440/gigabeat-fx to avoid problems with possible ports in the future: Gigabeat S/V (i.mx31 based) and Kenwood HD20GA7/HD20GA9 (s3c2440 based) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13200 a1c6a512-1295-4272-9138-f99709370657
2007-04-18 12:22:27 +00:00
target/arm/s3c2440/gigabeat-fx/adc-meg-fx.c
target/arm/s3c2440/gigabeat-fx/ata-meg-fx.c
target/arm/s3c2440/gigabeat-fx/backlight-meg-fx.c
target/arm/s3c2440/gigabeat-fx/button-meg-fx.c
Gigabeat: Add timer functionality. Rework tick timer setup to be exactly 100Hz. Metronome should work now but some pcm changes are needed to have faster tocks work correctly (in the works). git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13806 a1c6a512-1295-4272-9138-f99709370657
2007-07-06 21:36:32 +00:00
target/arm/s3c2440/gigabeat-fx/kernel-meg-fx.c
move the Gigabeat from gigabeat/meg-fx to s3c2440/gigabeat-fx to avoid problems with possible ports in the future: Gigabeat S/V (i.mx31 based) and Kenwood HD20GA7/HD20GA9 (s3c2440 based) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13200 a1c6a512-1295-4272-9138-f99709370657
2007-04-18 12:22:27 +00:00
target/arm/s3c2440/gigabeat-fx/lcd-meg-fx.c
target/arm/s3c2440/gigabeat-fx/power-meg-fx.c
target/arm/s3c2440/gigabeat-fx/sc606-meg-fx.c
target/arm/s3c2440/gigabeat-fx/system-meg-fx.c
Fix red and clean up meg-fx firmware sources. Remove an unused file. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16887 a1c6a512-1295-4272-9138-f99709370657
2008-03-30 06:06:43 +00:00
target/arm/s3c2440/gigabeat-fx/usb-meg-fx.c
merge a big part of the unofficial gigabeat cvs back. Includes working bootloader and rockbox with audio. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11850 a1c6a512-1295-4272-9138-f99709370657
2006-12-29 02:49:12 +00:00
#ifndef BOOTLOADER
Fix red and clean up meg-fx firmware sources. Remove an unused file. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16887 a1c6a512-1295-4272-9138-f99709370657
2008-03-30 06:06:43 +00:00
target/arm/s3c2440/gigabeat-fx/i2c-meg-fx.c
move the Gigabeat from gigabeat/meg-fx to s3c2440/gigabeat-fx to avoid problems with possible ports in the future: Gigabeat S/V (i.mx31 based) and Kenwood HD20GA7/HD20GA9 (s3c2440 based) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13200 a1c6a512-1295-4272-9138-f99709370657
2007-04-18 12:22:27 +00:00
target/arm/s3c2440/gigabeat-fx/pcm-meg-fx.c
Fix red and clean up meg-fx firmware sources. Remove an unused file. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16887 a1c6a512-1295-4272-9138-f99709370657
2008-03-30 06:06:43 +00:00
target/arm/s3c2440/gigabeat-fx/powermgmt-meg-fx.c
target/arm/s3c2440/gigabeat-fx/timer-meg-fx.c
target/arm/s3c2440/gigabeat-fx/wmcodec-meg-fx.c
merge a big part of the unofficial gigabeat cvs back. Includes working bootloader and rockbox with audio. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11850 a1c6a512-1295-4272-9138-f99709370657
2006-12-29 02:49:12 +00:00
#endif
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
#endif /* SIMULATOR */
#endif /* GIGABEAT_F */
Initial commit of work for port to the Tatung Elio TPJ-1022 - yet another PortalPlayer PP5020 target. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@10828 a1c6a512-1295-4272-9138-f99709370657
2006-08-31 19:19:35 +00:00
Merge the Gigabeat S branch back into trunk. Fingers crossed nothing breaks. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14805 a1c6a512-1295-4272-9138-f99709370657
2007-09-21 15:51:53 +00:00
#ifdef GIGABEAT_S
#ifndef SIMULATOR
Gigabeat S mixer: Make some progress. Get the tick and core sleep working using the AVIC. Redo the startup code to remap from IRAM and not include the lcd driver frambuffer in the remapping (until it can be moved). Clean up LCD driver. For other misc. changes, see the diffs. Now it progresses to ATA init and fails with -11 but without crashing or hanging. Replace all bootloaders. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16216 a1c6a512-1295-4272-9138-f99709370657
2008-02-05 04:43:19 +00:00
target/arm/lcd-as-memframe.S
Refine the routines in mmu-arm.c and move them to mmu-arm.S since the code is now 100% assembly. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19980 a1c6a512-1295-4272-9138-f99709370657
2009-02-11 23:56:00 +00:00
target/arm/mmu-arm.S
imx31: Rename clkctl-imx31.* to ccm-imx31.* and move up from ...imx31/gigabeat-s to .../imx31. A bunch more should probably go up a level too. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20443 a1c6a512-1295-4272-9138-f99709370657
2009-03-22 02:13:27 +00:00
target/arm/imx31/ccm-imx31.c
Add a "View I/O Ports" screen for imx31. Show all GPIO contents. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17072 a1c6a512-1295-4272-9138-f99709370657
2008-04-11 15:49:48 +00:00
target/arm/imx31/debug-imx31.c
Gigabeat S RoLo: Properly execute firmware copy from an IRAM stub because the currently running image was being overwritten in place. Minor tweak to rolo.c based on imx31 errata sheet about not masking FIQ without masking IRQ which is fine to use on all ARM anyway. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17414 a1c6a512-1295-4272-9138-f99709370657
2008-05-08 12:09:14 +00:00
target/arm/imx31/rolo_restart.S
Gigabeat S: Implement MDMA and UDMA disk access for bootloader and main binary. Add a needed SDMA API to check channel errors. Increase audio DMA channels' priority as required. Reads and writes measure faster accross all test_disk tests and especially at 4KB and 1MB. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20299 a1c6a512-1295-4272-9138-f99709370657
2009-03-12 06:31:40 +00:00
target/arm/imx31/sdma-imx31.c
Merge the Gigabeat S branch back into trunk. Fingers crossed nothing breaks. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14805 a1c6a512-1295-4272-9138-f99709370657
2007-09-21 15:51:53 +00:00
target/arm/imx31/gigabeat-s/adc-imx31.c
target/arm/imx31/gigabeat-s/ata-imx31.c
Gigabeat S mixer: Make some progress. Get the tick and core sleep working using the AVIC. Redo the startup code to remap from IRAM and not include the lcd driver frambuffer in the remapping (until it can be moved). Clean up LCD driver. For other misc. changes, see the diffs. Now it progresses to ATA init and fails with -11 but without crashing or hanging. Replace all bootloaders. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16216 a1c6a512-1295-4272-9138-f99709370657
2008-02-05 04:43:19 +00:00
target/arm/imx31/gigabeat-s/avic-imx31.c
Merge the Gigabeat S branch back into trunk. Fingers crossed nothing breaks. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14805 a1c6a512-1295-4272-9138-f99709370657
2007-09-21 15:51:53 +00:00
target/arm/imx31/gigabeat-s/backlight-imx31.c
target/arm/imx31/gigabeat-s/button-imx31.c
Add GPIO manager. Get the PMIC interrupt handling working (along with power button and HP detect). Add some reg field defined instead of using raw numbers. Add PMIC info to debug ports screen. Refine PMIC driver ops a little bit. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17086 a1c6a512-1295-4272-9138-f99709370657
2008-04-12 16:56:45 +00:00
target/arm/imx31/gigabeat-s/gpio-gigabeat-s.c
Gigabeat S: 1) Rework event handling and static registration mechanism. No target- specific code in mc13783 driver. GPIO event driver interfaces more cleanly. 2) Somewhat related - enable thread priority for bootloader which is desireable here (ffs is used for GPIO event enabling anyway and that goes along with priority). git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17593 a1c6a512-1295-4272-9138-f99709370657
2008-05-21 08:42:11 +00:00
target/arm/imx31/gigabeat-s/gpio-imx31.c
Gigabeat S mixer: Make some progress. Get the tick and core sleep working using the AVIC. Redo the startup code to remap from IRAM and not include the lcd driver frambuffer in the remapping (until it can be moved). Clean up LCD driver. For other misc. changes, see the diffs. Now it progresses to ATA init and fails with -11 but without crashing or hanging. Replace all bootloaders. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16216 a1c6a512-1295-4272-9138-f99709370657
2008-02-05 04:43:19 +00:00
target/arm/imx31/gigabeat-s/kernel-imx31.c
Merge the Gigabeat S branch back into trunk. Fingers crossed nothing breaks. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14805 a1c6a512-1295-4272-9138-f99709370657
2007-09-21 15:51:53 +00:00
target/arm/imx31/gigabeat-s/i2c-imx31.c
target/arm/imx31/gigabeat-s/i2s-imx31.c
target/arm/imx31/gigabeat-s/lcd-imx31.c
Gigabeat S: 1) Rework event handling and static registration mechanism. No target- specific code in mc13783 driver. GPIO event driver interfaces more cleanly. 2) Somewhat related - enable thread priority for bootloader which is desireable here (ffs is used for GPIO event enabling anyway and that goes along with priority). git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17593 a1c6a512-1295-4272-9138-f99709370657
2008-05-21 08:42:11 +00:00
target/arm/imx31/gigabeat-s/mc13783-gigabeat-s.c
Serial driver for imx31. Perhaps not 100% but maybe 80-90% (future developments will tell). Factor-out the mc13783 stuff and make that driver a layer above the SPI. TODO: start processing PMIC interrupts. Start a clkctl API for imx31 (we'll see if this sticks around but it seems reasonable here). Misc. stuff for convenience/neatness. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17070 a1c6a512-1295-4272-9138-f99709370657
2008-04-11 08:51:27 +00:00
target/arm/imx31/gigabeat-s/mc13783-imx31.c
Gigabeat S mixer: Make some progress. Get the tick and core sleep working using the AVIC. Redo the startup code to remap from IRAM and not include the lcd driver frambuffer in the remapping (until it can be moved). Clean up LCD driver. For other misc. changes, see the diffs. Now it progresses to ATA init and fails with -11 but without crashing or hanging. Replace all bootloaders. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16216 a1c6a512-1295-4272-9138-f99709370657
2008-02-05 04:43:19 +00:00
target/arm/imx31/gigabeat-s/mmu-imx31.c
Merge the Gigabeat S branch back into trunk. Fingers crossed nothing breaks. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14805 a1c6a512-1295-4272-9138-f99709370657
2007-09-21 15:51:53 +00:00
target/arm/imx31/gigabeat-s/power-imx31.c
target/arm/imx31/gigabeat-s/powermgmt-imx31.c
Gigabeat S mixer: Make some progress. Get the tick and core sleep working using the AVIC. Redo the startup code to remap from IRAM and not include the lcd driver frambuffer in the remapping (until it can be moved). Clean up LCD driver. For other misc. changes, see the diffs. Now it progresses to ATA init and fails with -11 but without crashing or hanging. Replace all bootloaders. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16216 a1c6a512-1295-4272-9138-f99709370657
2008-02-05 04:43:19 +00:00
target/arm/imx31/gigabeat-s/spi-imx31.c
target/arm/imx31/gigabeat-s/system-imx31.c
Merge the Gigabeat S branch back into trunk. Fingers crossed nothing breaks. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14805 a1c6a512-1295-4272-9138-f99709370657
2007-09-21 15:51:53 +00:00
target/arm/imx31/gigabeat-s/usb-imx31.c
target/arm/imx31/gigabeat-s/wmcodec-imx31.c
#ifndef BOOTLOADER
FS#9609 FM radio support for the Gigabeat S, seeking/scanning is not yet implemented but manual tuning works nicely. Thanks to Rafaël Carré, Bertrik Sikken and Robert Menes for suggestions and debugging help. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19372 a1c6a512-1295-4272-9138-f99709370657
2008-12-09 20:48:04 +00:00
target/arm/imx31/gigabeat-s/audio-gigabeat-s.c
target/arm/imx31/gigabeat-s/fmradio-i2c-gigabeat-s.c
Gigabeat S: Add remote control reading and proper headphone insert detection. We need keymaps! A few were copied straight from Gigabeat F/X just to get things worked out. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19830 a1c6a512-1295-4272-9138-f99709370657
2009-01-23 20:55:17 +00:00
target/arm/imx31/gigabeat-s/headphone-gigabeat-s.c
Gigabeat S: Get timer API working. metronome will work now. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19676 a1c6a512-1295-4272-9138-f99709370657
2009-01-05 00:00:29 +00:00
target/arm/imx31/gigabeat-s/pcm-imx31.c
target/arm/imx31/gigabeat-s/timer-imx31.c
Merge the Gigabeat S branch back into trunk. Fingers crossed nothing breaks. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14805 a1c6a512-1295-4272-9138-f99709370657
2007-09-21 15:51:53 +00:00
#endif
#endif /* SIMULATOR */
#endif /* GIGABEAT_S */
Commit whole Creative Zen Vision:M target tree + all related firmware/ changes. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17241 a1c6a512-1295-4272-9138-f99709370657
2008-04-24 20:08:28 +00:00
#if CONFIG_CPU == DM320
target/arm/tms320dm320/debug-dm320.c
target/arm/tms320dm320/dsp-dm320.c
target/arm/tms320dm320/i2c-dm320.c
target/arm/tms320dm320/kernel-dm320.c
target/arm/tms320dm320/spi-dm320.c
target/arm/tms320dm320/system-dm320.c
target/arm/tms320dm320/timer-dm320.c
target/arm/tms320dm320/uart-dm320.c
#endif /* CONFIG_CPU == DM320 */
Beginning of an M:Robe 500i port. Currently only in the bootloader stage. Needs another piece of code to start the boot process - will be in the wiki. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14763 a1c6a512-1295-4272-9138-f99709370657
2007-09-20 04:46:41 +00:00
#ifdef MROBE_500
#ifndef SIMULATOR
More M:Robe work including a fix to lcd-as-memframe for larger screens thanks to Michael Sevakis. Also fixes simulator builds. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15254 a1c6a512-1295-4272-9138-f99709370657
2007-10-21 23:12:17 +00:00
target/arm/lcd-as-memframe.S
Refine the routines in mmu-arm.c and move them to mmu-arm.S since the code is now 100% assembly. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19980 a1c6a512-1295-4272-9138-f99709370657
2009-02-11 23:56:00 +00:00
target/arm/mmu-arm.S
I got bullied in IRC by linuxstb and markun... git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14909 a1c6a512-1295-4272-9138-f99709370657
2007-09-30 08:57:49 +00:00
target/arm/tms320dm320/mrobe-500/adc-mr500.c
target/arm/tms320dm320/mrobe-500/ata-mr500.c
target/arm/tms320dm320/mrobe-500/backlight-mr500.c
target/arm/tms320dm320/mrobe-500/button-mr500.c
Move some more files around and get the main build compiling git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14919 a1c6a512-1295-4272-9138-f99709370657
2007-09-30 16:29:21 +00:00
target/arm/tms320dm320/mrobe-500/dm320codec-mr500.c
I got bullied in IRC by linuxstb and markun... git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14909 a1c6a512-1295-4272-9138-f99709370657
2007-09-30 08:57:49 +00:00
target/arm/tms320dm320/mrobe-500/lcd-mr500.c
More M:Robe work including a fix to lcd-as-memframe for larger screens thanks to Michael Sevakis. Also fixes simulator builds. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15254 a1c6a512-1295-4272-9138-f99709370657
2007-10-21 23:12:17 +00:00
#if defined(HAVE_REMOTE_LCD)
target/arm/tms320dm320/mrobe-500/lcd-remote-mr500.c
#endif
Move some more files around and get the main build compiling git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14919 a1c6a512-1295-4272-9138-f99709370657
2007-09-30 16:29:21 +00:00
target/arm/tms320dm320/mrobe-500/pcm-mr500.c
target/arm/tms320dm320/mrobe-500/powermgmt-mr500.c
I got bullied in IRC by linuxstb and markun... git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14909 a1c6a512-1295-4272-9138-f99709370657
2007-09-30 08:57:49 +00:00
target/arm/tms320dm320/mrobe-500/power-mr500.c
target/arm/tms320dm320/mrobe-500/usb-mr500.c
Beginning of an M:Robe 500i port. Currently only in the bootloader stage. Needs another piece of code to start the boot process - will be in the wiki. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14763 a1c6a512-1295-4272-9138-f99709370657
2007-09-20 04:46:41 +00:00
#endif /* SIMULATOR */
#endif /* MROBE_500 */
1) Use a separate config-<target>.h for Zen Vision(:M) (60GB) 2) Other unrelated cleanups git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17503 a1c6a512-1295-4272-9138-f99709370657
2008-05-14 18:55:19 +00:00
#ifdef CREATIVE_ZVx
Commit whole Creative Zen Vision:M target tree + all related firmware/ changes. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17241 a1c6a512-1295-4272-9138-f99709370657
2008-04-24 20:08:28 +00:00
#ifndef SIMULATOR
1) add support for ata-as-arm 2) remove obsolete audio-creativezvm.c 3) fix registers in i2c-dm320.c git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17316 a1c6a512-1295-4272-9138-f99709370657
2008-05-03 13:43:26 +00:00
target/arm/ata-as-arm.S
Commit whole Creative Zen Vision:M target tree + all related firmware/ changes. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17241 a1c6a512-1295-4272-9138-f99709370657
2008-04-24 20:08:28 +00:00
target/arm/lcd-as-memframe.S
Refine the routines in mmu-arm.c and move them to mmu-arm.S since the code is now 100% assembly. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19980 a1c6a512-1295-4272-9138-f99709370657
2009-02-11 23:56:00 +00:00
target/arm/mmu-arm.S
Commit whole Creative Zen Vision:M target tree + all related firmware/ changes. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17241 a1c6a512-1295-4272-9138-f99709370657
2008-04-24 20:08:28 +00:00
target/arm/tms320dm320/creative-zvm/adc-creativezvm.c
target/arm/tms320dm320/creative-zvm/ata-creativezvm.c
Split up DMA and ATA, but don't enable it (yet). git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17386 a1c6a512-1295-4272-9138-f99709370657
2008-05-05 15:47:26 +00:00
target/arm/tms320dm320/creative-zvm/dma-creativezvm.c
target/arm/tms320dm320/creative-zvm/lcd-creativezvm.c
Commit whole Creative Zen Vision:M target tree + all related firmware/ changes. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17241 a1c6a512-1295-4272-9138-f99709370657
2008-04-24 20:08:28 +00:00
target/arm/tms320dm320/creative-zvm/pcm-creativezvm.c
target/arm/tms320dm320/creative-zvm/pic-creativezvm.c
target/arm/tms320dm320/creative-zvm/power-creativezvm.c
target/arm/tms320dm320/creative-zvm/powermgmt-creativezvm.c
target/arm/tms320dm320/creative-zvm/usb-creativezvm.c
#endif /* SIMULATOR */
1) Use a separate config-<target>.h for Zen Vision(:M) (60GB) 2) Other unrelated cleanups git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17503 a1c6a512-1295-4272-9138-f99709370657
2008-05-14 18:55:19 +00:00
#endif /* CREATIVE_ZVx */
Commit whole Creative Zen Vision:M target tree + all related firmware/ changes. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17241 a1c6a512-1295-4272-9138-f99709370657
2008-04-24 20:08:28 +00:00
Initial commit for the Olympus m:robe 100 port (PP5020). The LCD driver works. The ADC driver was copied from the H10 port (they can probably be combined later), but the battery readings aren't right and it shuts down. The touch pad buttons do not work. Install the bootloader and rockbox the H10 way. Still lots of work to do. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16030 a1c6a512-1295-4272-9138-f99709370657
2008-01-09 07:24:43 +00:00
#ifdef MROBE_100
#ifndef SIMULATOR
Move the Synaptics touchpad driver for the m:robe 100 to a common place. It will (soon) be used for the Philips HDD1630. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19465 a1c6a512-1295-4272-9138-f99709370657
2008-12-17 04:38:53 +00:00
#ifndef BOOTLOADER
drivers/synaptics-mep.c
#endif /* BOOTLOADER */
mrobe 100: real time clock (if anybody recognises the RTC chip let me know) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16208 a1c6a512-1295-4272-9138-f99709370657
2008-02-03 18:15:39 +00:00
drivers/sw_i2c.c
Initial commit for the Olympus m:robe 100 port (PP5020). The LCD driver works. The ADC driver was copied from the H10 port (they can probably be combined later), but the battery readings aren't right and it shuts down. The touch pad buttons do not work. Install the bootloader and rockbox the H10 way. Still lots of work to do. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16030 a1c6a512-1295-4272-9138-f99709370657
2008-01-09 07:24:43 +00:00
target/arm/ata-as-arm.S
target/arm/ata-pp5020.c
target/arm/wmcodec-pp.c
target/arm/i2s-pp.c
- share adc reading code between h10 and mrobe100 - battery voltage calibrated and used for mrobe100 git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16064 a1c6a512-1295-4272-9138-f99709370657
2008-01-12 20:36:45 +00:00
target/arm/adc-pp5020.c
Initial commit for the Olympus m:robe 100 port (PP5020). The LCD driver works. The ADC driver was copied from the H10 port (they can probably be combined later), but the battery readings aren't right and it shuts down. The touch pad buttons do not work. Install the bootloader and rockbox the H10 way. Still lots of work to do. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16030 a1c6a512-1295-4272-9138-f99709370657
2008-01-09 07:24:43 +00:00
target/arm/olympus/mrobe-100/backlight-mr100.c
target/arm/olympus/mrobe-100/button-mr100.c
target/arm/olympus/mrobe-100/lcd-mr100.c
Make the greyscale library work on the m:robe 100. Testing on target done by Robert Kukla & Dominik Riebeling. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17028 a1c6a512-1295-4272-9138-f99709370657
2008-04-07 21:14:29 +00:00
target/arm/olympus/mrobe-100/lcd-as-mr100.S
Initial commit for the Olympus m:robe 100 port (PP5020). The LCD driver works. The ADC driver was copied from the H10 port (they can probably be combined later), but the battery readings aren't right and it shuts down. The touch pad buttons do not work. Install the bootloader and rockbox the H10 way. Still lots of work to do. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16030 a1c6a512-1295-4272-9138-f99709370657
2008-01-09 07:24:43 +00:00
target/arm/olympus/mrobe-100/power-mr100.c
target/arm/olympus/mrobe-100/powermgmt-mr100.c
target/arm/usb-fw-pp502x.c
#endif /* SIMULATOR */
#endif /* MROBE_100 */
Initial commit of work for port to the Tatung Elio TPJ-1022 - yet another PortalPlayer PP5020 target. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@10828 a1c6a512-1295-4272-9138-f99709370657
2006-08-31 19:19:35 +00:00
#ifdef ELIO_TPJ1022
#ifndef SIMULATOR
Assembler optimised ATA transfer loops for ARM targets. Only used for PP5020/5021/5022 targets atm. PP5002 seems to have problems with it not directly related to the asm code itself, and the gigabeat doesn't profit from it, probably because the CPU isn't the bottleneck even without optimisation. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12099 a1c6a512-1295-4272-9138-f99709370657
2007-01-24 00:12:08 +00:00
target/arm/ata-as-arm.S
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
target/arm/ata-pp5020.c
target/arm/wmcodec-pp.c
Move I2S initialisation out of the Wolfson codec driver git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11700 a1c6a512-1295-4272-9138-f99709370657
2006-12-09 19:18:18 +00:00
target/arm/i2s-pp.c
Move the PP5020 ADC defines to the c-file instead of repeating them across the header files. Also, the Tatung TPJ1022 should use the common PP5020 ADC driver. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19864 a1c6a512-1295-4272-9138-f99709370657
2009-01-27 03:19:57 +00:00
target/arm/adc-pp5020.c
Initial commit of work for port to the Tatung Elio TPJ-1022 - yet another PortalPlayer PP5020 target. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@10828 a1c6a512-1295-4272-9138-f99709370657
2006-08-31 19:19:35 +00:00
target/arm/tatung/tpj1022/backlight-tpj1022.c
target/arm/tatung/tpj1022/button-tpj1022.c
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
target/arm/tatung/tpj1022/lcd-tpj1022.c
Initial commit of work for port to the Tatung Elio TPJ-1022 - yet another PortalPlayer PP5020 target. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@10828 a1c6a512-1295-4272-9138-f99709370657
2006-08-31 19:19:35 +00:00
target/arm/tatung/tpj1022/power-tpj1022.c
First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14375 a1c6a512-1295-4272-9138-f99709370657
2007-08-17 06:45:18 +00:00
target/arm/tatung/tpj1022/powermgmt-tpj1022.c
Firewire detection with reboot into diskmode for all iPods that support it (all but Nano and Video). * Hack for compiling iPod G3 removed. * Code cleanup. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14131 a1c6a512-1295-4272-9138-f99709370657
2007-08-01 22:44:02 +00:00
target/arm/usb-fw-pp502x.c
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
#endif /* SIMULATOR */
#endif /* ELIO_TPJ1022 */
Move all iPod targets into the target tree. FS#5890 git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11129 a1c6a512-1295-4272-9138-f99709370657
2006-10-05 10:58:51 +00:00
#ifdef IPOD_4G
#ifndef SIMULATOR
drivers/pcf50605.c
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
target/arm/wmcodec-pp.c
Move I2S initialisation out of the Wolfson codec driver git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11700 a1c6a512-1295-4272-9138-f99709370657
2006-12-09 19:18:18 +00:00
target/arm/i2s-pp.c
Assembler optimised ATA transfer loops for ARM targets. Only used for PP5020/5021/5022 targets atm. PP5002 seems to have problems with it not directly related to the asm code itself, and the gigabeat doesn't profit from it, probably because the CPU isn't the bottleneck even without optimisation. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12099 a1c6a512-1295-4272-9138-f99709370657
2007-01-24 00:12:08 +00:00
target/arm/ata-as-arm.S
Move all iPod targets into the target tree. FS#5890 git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11129 a1c6a512-1295-4272-9138-f99709370657
2006-10-05 10:58:51 +00:00
target/arm/ata-pp5020.c
First version of a 1st/2nd gen ADC driver. 1st gen is untested yet. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14082 a1c6a512-1295-4272-9138-f99709370657
2007-07-30 20:12:03 +00:00
target/arm/ipod/adc-ipod-pcf.c
Move all iPod targets into the target tree. FS#5890 git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11129 a1c6a512-1295-4272-9138-f99709370657
2006-10-05 10:58:51 +00:00
target/arm/ipod/backlight-4g_color.c
target/arm/ipod/button-clickwheel.c
Greyscale ipod lcd driver: * Assembler optimised low level functions. PP5002 targets benefit most (lcd_update() speedup >50%, and the greyscale overlay no longer makes mp3 playback skip). * Consistent brace placement style. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16060 a1c6a512-1295-4272-9138-f99709370657
2008-01-12 00:59:18 +00:00
target/arm/ipod/lcd-as-gray.S
Moved ipod LCD code to target tree. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12479 a1c6a512-1295-4272-9138-f99709370657
2007-02-25 13:11:02 +00:00
target/arm/ipod/lcd-gray.c
Move all iPod targets into the target tree. FS#5890 git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11129 a1c6a512-1295-4272-9138-f99709370657
2006-10-05 10:58:51 +00:00
target/arm/ipod/power-ipod.c
First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14375 a1c6a512-1295-4272-9138-f99709370657
2007-08-17 06:45:18 +00:00
target/arm/ipod/powermgmt-ipod-pcf.c
Firewire detection with reboot into diskmode for all iPods that support it (all but Nano and Video). * Hack for compiling iPod G3 removed. * Code cleanup. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14131 a1c6a512-1295-4272-9138-f99709370657
2007-08-01 22:44:02 +00:00
target/arm/usb-fw-pp502x.c
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
#endif /* SIMULATOR */
#endif /* IPOD_4G */
Move all iPod targets into the target tree. FS#5890 git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11129 a1c6a512-1295-4272-9138-f99709370657
2006-10-05 10:58:51 +00:00
#ifdef IPOD_COLOR
#ifndef SIMULATOR
drivers/pcf50605.c
Assembler optimised ATA transfer loops for ARM targets. Only used for PP5020/5021/5022 targets atm. PP5002 seems to have problems with it not directly related to the asm code itself, and the gigabeat doesn't profit from it, probably because the CPU isn't the bottleneck even without optimisation. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12099 a1c6a512-1295-4272-9138-f99709370657
2007-01-24 00:12:08 +00:00
target/arm/ata-as-arm.S
Move all iPod targets into the target tree. FS#5890 git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11129 a1c6a512-1295-4272-9138-f99709370657
2006-10-05 10:58:51 +00:00
target/arm/ata-pp5020.c
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
target/arm/wmcodec-pp.c
Move I2S initialisation out of the Wolfson codec driver git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11700 a1c6a512-1295-4272-9138-f99709370657
2006-12-09 19:18:18 +00:00
target/arm/i2s-pp.c
First version of a 1st/2nd gen ADC driver. 1st gen is untested yet. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14082 a1c6a512-1295-4272-9138-f99709370657
2007-07-30 20:12:03 +00:00
target/arm/ipod/adc-ipod-pcf.c
Move all iPod targets into the target tree. FS#5890 git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11129 a1c6a512-1295-4272-9138-f99709370657
2006-10-05 10:58:51 +00:00
target/arm/ipod/backlight-4g_color.c
target/arm/ipod/button-clickwheel.c
Moved ipod LCD code to target tree. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12479 a1c6a512-1295-4272-9138-f99709370657
2007-02-25 13:11:02 +00:00
target/arm/ipod/lcd-color_nano.c
Move all iPod targets into the target tree. FS#5890 git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11129 a1c6a512-1295-4272-9138-f99709370657
2006-10-05 10:58:51 +00:00
target/arm/ipod/power-ipod.c
First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14375 a1c6a512-1295-4272-9138-f99709370657
2007-08-17 06:45:18 +00:00
target/arm/ipod/powermgmt-ipod-pcf.c
Firewire detection with reboot into diskmode for all iPods that support it (all but Nano and Video). * Hack for compiling iPod G3 removed. * Code cleanup. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14131 a1c6a512-1295-4272-9138-f99709370657
2007-08-01 22:44:02 +00:00
target/arm/usb-fw-pp502x.c
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
#endif /* SIMULATOR */
#endif /* IPOD_COLOR */
Move all iPod targets into the target tree. FS#5890 git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11129 a1c6a512-1295-4272-9138-f99709370657
2006-10-05 10:58:51 +00:00
#ifdef IPOD_NANO
#ifndef SIMULATOR
drivers/pcf50605.c
Assembler optimised ATA transfer loops for ARM targets. Only used for PP5020/5021/5022 targets atm. PP5002 seems to have problems with it not directly related to the asm code itself, and the gigabeat doesn't profit from it, probably because the CPU isn't the bottleneck even without optimisation. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12099 a1c6a512-1295-4272-9138-f99709370657
2007-01-24 00:12:08 +00:00
target/arm/ata-as-arm.S
Move all iPod targets into the target tree. FS#5890 git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11129 a1c6a512-1295-4272-9138-f99709370657
2006-10-05 10:58:51 +00:00
target/arm/ata-pp5020.c
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
target/arm/wmcodec-pp.c
Move I2S initialisation out of the Wolfson codec driver git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11700 a1c6a512-1295-4272-9138-f99709370657
2006-12-09 19:18:18 +00:00
target/arm/i2s-pp.c
First version of a 1st/2nd gen ADC driver. 1st gen is untested yet. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14082 a1c6a512-1295-4272-9138-f99709370657
2007-07-30 20:12:03 +00:00
target/arm/ipod/adc-ipod-pcf.c
Move all iPod targets into the target tree. FS#5890 git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11129 a1c6a512-1295-4272-9138-f99709370657
2006-10-05 10:58:51 +00:00
target/arm/ipod/backlight-nano_video.c
target/arm/ipod/button-clickwheel.c
Moved ipod LCD code to target tree. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12479 a1c6a512-1295-4272-9138-f99709370657
2007-02-25 13:11:02 +00:00
target/arm/ipod/lcd-color_nano.c
Move all iPod targets into the target tree. FS#5890 git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11129 a1c6a512-1295-4272-9138-f99709370657
2006-10-05 10:58:51 +00:00
target/arm/ipod/power-ipod.c
First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14375 a1c6a512-1295-4272-9138-f99709370657
2007-08-17 06:45:18 +00:00
target/arm/ipod/powermgmt-ipod-pcf.c
Firewire detection with reboot into diskmode for all iPods that support it (all but Nano and Video). * Hack for compiling iPod G3 removed. * Code cleanup. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14131 a1c6a512-1295-4272-9138-f99709370657
2007-08-01 22:44:02 +00:00
target/arm/usb-fw-pp502x.c
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
#endif /* SIMULATOR */
#endif /* IPOD_NANO */
Move all iPod targets into the target tree. FS#5890 git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11129 a1c6a512-1295-4272-9138-f99709370657
2006-10-05 10:58:51 +00:00
#ifdef IPOD_VIDEO
#ifndef SIMULATOR
drivers/pcf50605.c
Assembler optimised ATA transfer loops for ARM targets. Only used for PP5020/5021/5022 targets atm. PP5002 seems to have problems with it not directly related to the asm code itself, and the gigabeat doesn't profit from it, probably because the CPU isn't the bottleneck even without optimisation. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12099 a1c6a512-1295-4272-9138-f99709370657
2007-01-24 00:12:08 +00:00
target/arm/ata-as-arm.S
Move all iPod targets into the target tree. FS#5890 git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11129 a1c6a512-1295-4272-9138-f99709370657
2006-10-05 10:58:51 +00:00
target/arm/ata-pp5020.c
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
target/arm/wmcodec-pp.c
Move I2S initialisation out of the Wolfson codec driver git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11700 a1c6a512-1295-4272-9138-f99709370657
2006-12-09 19:18:18 +00:00
target/arm/i2s-pp.c
First version of a 1st/2nd gen ADC driver. 1st gen is untested yet. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14082 a1c6a512-1295-4272-9138-f99709370657
2007-07-30 20:12:03 +00:00
target/arm/ipod/adc-ipod-pcf.c
Move all iPod targets into the target tree. FS#5890 git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11129 a1c6a512-1295-4272-9138-f99709370657
2006-10-05 10:58:51 +00:00
target/arm/ipod/backlight-nano_video.c
target/arm/ipod/button-clickwheel.c
target/arm/ipod/power-ipod.c
First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14375 a1c6a512-1295-4272-9138-f99709370657
2007-08-17 06:45:18 +00:00
target/arm/ipod/powermgmt-ipod-pcf.c
Assembler optimised lcd_yuv_blit() for iPod Video (Fs #7951 by Andree Buschmann, adapted and separated into an .S file by me). git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15257 a1c6a512-1295-4272-9138-f99709370657
2007-10-22 00:37:50 +00:00
target/arm/ipod/video/lcd-as-video.S
Moved ipod LCD code to target tree. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12479 a1c6a512-1295-4272-9138-f99709370657
2007-02-25 13:11:02 +00:00
target/arm/ipod/video/lcd-video.c
Firewire detection with reboot into diskmode for all iPods that support it (all but Nano and Video). * Hack for compiling iPod G3 removed. * Code cleanup. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14131 a1c6a512-1295-4272-9138-f99709370657
2007-08-01 22:44:02 +00:00
target/arm/usb-fw-pp502x.c
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
#endif /* SIMULATOR */
#endif /* IPOD_VIDEO */
Move all iPod targets into the target tree. FS#5890 git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11129 a1c6a512-1295-4272-9138-f99709370657
2006-10-05 10:58:51 +00:00
#ifdef IPOD_3G
#ifndef SIMULATOR
drivers/pcf50605.c
put back the PP5002 specific ATA code that got lost during the ipod target tree move git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11467 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 12:34:21 +00:00
target/arm/ata-pp5002.c
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
target/arm/wmcodec-pp.c
Move I2S initialisation out of the Wolfson codec driver git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11700 a1c6a512-1295-4272-9138-f99709370657
2006-12-09 19:18:18 +00:00
target/arm/i2s-pp.c
First version of a 1st/2nd gen ADC driver. 1st gen is untested yet. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14082 a1c6a512-1295-4272-9138-f99709370657
2007-07-30 20:12:03 +00:00
target/arm/ipod/adc-ipod-pcf.c
Move all iPod targets into the target tree. FS#5890 git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11129 a1c6a512-1295-4272-9138-f99709370657
2006-10-05 10:58:51 +00:00
target/arm/ipod/3g/backlight-3g.c
iPod 2nd gen: * Fake battery voltage of 4.00V so rockbox doesn't shutdown (ADC is not yet implemented). * Fix button hold polarity for main rockbox. * Implement backlight inversion (the 1st/2nd gen backlight works in a way that makes the LCD look inverted when active). * Fix default contrast and clean up target tree. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14022 a1c6a512-1295-4272-9138-f99709370657
2007-07-27 12:05:54 +00:00
target/arm/ipod/button-1g-3g.c
Greyscale ipod lcd driver: * Assembler optimised low level functions. PP5002 targets benefit most (lcd_update() speedup >50%, and the greyscale overlay no longer makes mp3 playback skip). * Consistent brace placement style. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16060 a1c6a512-1295-4272-9138-f99709370657
2008-01-12 00:59:18 +00:00
target/arm/ipod/lcd-as-gray.S
Moved ipod LCD code to target tree. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12479 a1c6a512-1295-4272-9138-f99709370657
2007-02-25 13:11:02 +00:00
target/arm/ipod/lcd-gray.c
Move all iPod targets into the target tree. FS#5890 git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11129 a1c6a512-1295-4272-9138-f99709370657
2006-10-05 10:58:51 +00:00
target/arm/ipod/power-ipod.c
First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14375 a1c6a512-1295-4272-9138-f99709370657
2007-08-17 06:45:18 +00:00
target/arm/ipod/powermgmt-ipod-pcf.c
Firewire detection with reboot into diskmode for all iPods that support it (all but Nano and Video). * Hack for compiling iPod G3 removed. * Code cleanup. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14131 a1c6a512-1295-4272-9138-f99709370657
2007-08-01 22:44:02 +00:00
target/arm/usb-fw-pp5002.c
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
#endif /* SIMULATOR */
#endif /* IPOD_3G */
Move all iPod targets into the target tree. FS#5890 git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11129 a1c6a512-1295-4272-9138-f99709370657
2006-10-05 10:58:51 +00:00
Further G1/G2 work. Bootloader compiles now, but probably won't work. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14017 a1c6a512-1295-4272-9138-f99709370657
2007-07-26 23:02:37 +00:00
#ifdef IPOD_1G2G
#ifndef SIMULATOR
target/arm/ata-pp5002.c
target/arm/wmcodec-pp.c
target/arm/i2s-pp.c
First version of a 1st/2nd gen ADC driver. 1st gen is untested yet. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14082 a1c6a512-1295-4272-9138-f99709370657
2007-07-30 20:12:03 +00:00
target/arm/ipod/1g2g/adc-ipod-1g2g.c
iPod 2nd gen: * Fake battery voltage of 4.00V so rockbox doesn't shutdown (ADC is not yet implemented). * Fix button hold polarity for main rockbox. * Implement backlight inversion (the 1st/2nd gen backlight works in a way that makes the LCD look inverted when active). * Fix default contrast and clean up target tree. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14022 a1c6a512-1295-4272-9138-f99709370657
2007-07-27 12:05:54 +00:00
target/arm/ipod/1g2g/backlight-1g2g.c
First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14375 a1c6a512-1295-4272-9138-f99709370657
2007-08-17 06:45:18 +00:00
target/arm/ipod/1g2g/powermgmt-1g2g.c
iPod 2nd gen: * Fake battery voltage of 4.00V so rockbox doesn't shutdown (ADC is not yet implemented). * Fix button hold polarity for main rockbox. * Implement backlight inversion (the 1st/2nd gen backlight works in a way that makes the LCD look inverted when active). * Fix default contrast and clean up target tree. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14022 a1c6a512-1295-4272-9138-f99709370657
2007-07-27 12:05:54 +00:00
target/arm/ipod/button-1g-3g.c
Greyscale ipod lcd driver: * Assembler optimised low level functions. PP5002 targets benefit most (lcd_update() speedup >50%, and the greyscale overlay no longer makes mp3 playback skip). * Consistent brace placement style. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16060 a1c6a512-1295-4272-9138-f99709370657
2008-01-12 00:59:18 +00:00
target/arm/ipod/lcd-as-gray.S
Further G1/G2 work. Bootloader compiles now, but probably won't work. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14017 a1c6a512-1295-4272-9138-f99709370657
2007-07-26 23:02:37 +00:00
target/arm/ipod/lcd-gray.c
target/arm/ipod/power-ipod.c
Firewire detection with reboot into diskmode for all iPods that support it (all but Nano and Video). * Hack for compiling iPod G3 removed. * Code cleanup. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14131 a1c6a512-1295-4272-9138-f99709370657
2007-08-01 22:44:02 +00:00
target/arm/usb-fw-pp5002.c
Further G1/G2 work. Bootloader compiles now, but probably won't work. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14017 a1c6a512-1295-4272-9138-f99709370657
2007-07-26 23:02:37 +00:00
#endif /* SIMULATOR */
#endif /* IPOD_1G2G */
Move all iPod targets into the target tree. FS#5890 git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11129 a1c6a512-1295-4272-9138-f99709370657
2006-10-05 10:58:51 +00:00
#ifdef IPOD_MINI
#ifndef SIMULATOR
drivers/pcf50605.c
Assembler optimised ATA transfer loops for ARM targets. Only used for PP5020/5021/5022 targets atm. PP5002 seems to have problems with it not directly related to the asm code itself, and the gigabeat doesn't profit from it, probably because the CPU isn't the bottleneck even without optimisation. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12099 a1c6a512-1295-4272-9138-f99709370657
2007-01-24 00:12:08 +00:00
target/arm/ata-as-arm.S
Move all iPod targets into the target tree. FS#5890 git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11129 a1c6a512-1295-4272-9138-f99709370657
2006-10-05 10:58:51 +00:00
target/arm/ata-pp5020.c
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
target/arm/wmcodec-pp.c
Move I2S initialisation out of the Wolfson codec driver git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11700 a1c6a512-1295-4272-9138-f99709370657
2006-12-09 19:18:18 +00:00
target/arm/i2s-pp.c
First version of a 1st/2nd gen ADC driver. 1st gen is untested yet. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14082 a1c6a512-1295-4272-9138-f99709370657
2007-07-30 20:12:03 +00:00
target/arm/ipod/adc-ipod-pcf.c
Move all iPod targets into the target tree. FS#5890 git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11129 a1c6a512-1295-4272-9138-f99709370657
2006-10-05 10:58:51 +00:00
target/arm/ipod/backlight-mini1g_mini2g.c
target/arm/ipod/button-mini1g.c
Greyscale ipod lcd driver: * Assembler optimised low level functions. PP5002 targets benefit most (lcd_update() speedup >50%, and the greyscale overlay no longer makes mp3 playback skip). * Consistent brace placement style. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16060 a1c6a512-1295-4272-9138-f99709370657
2008-01-12 00:59:18 +00:00
target/arm/ipod/lcd-as-gray.S
Moved ipod LCD code to target tree. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12479 a1c6a512-1295-4272-9138-f99709370657
2007-02-25 13:11:02 +00:00
target/arm/ipod/lcd-gray.c
Move all iPod targets into the target tree. FS#5890 git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11129 a1c6a512-1295-4272-9138-f99709370657
2006-10-05 10:58:51 +00:00
target/arm/ipod/power-ipod.c
First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14375 a1c6a512-1295-4272-9138-f99709370657
2007-08-17 06:45:18 +00:00
target/arm/ipod/powermgmt-ipod-pcf.c
Firewire detection with reboot into diskmode for all iPods that support it (all but Nano and Video). * Hack for compiling iPod G3 removed. * Code cleanup. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14131 a1c6a512-1295-4272-9138-f99709370657
2007-08-01 22:44:02 +00:00
target/arm/usb-fw-pp502x.c
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
#endif /* SIMULATOR */
#endif /* IPOD_MINI */
Move all iPod targets into the target tree. FS#5890 git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11129 a1c6a512-1295-4272-9138-f99709370657
2006-10-05 10:58:51 +00:00
#ifdef IPOD_MINI2G
#ifndef SIMULATOR
drivers/pcf50605.c
Assembler optimised ATA transfer loops for ARM targets. Only used for PP5020/5021/5022 targets atm. PP5002 seems to have problems with it not directly related to the asm code itself, and the gigabeat doesn't profit from it, probably because the CPU isn't the bottleneck even without optimisation. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12099 a1c6a512-1295-4272-9138-f99709370657
2007-01-24 00:12:08 +00:00
target/arm/ata-as-arm.S
Move all iPod targets into the target tree. FS#5890 git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11129 a1c6a512-1295-4272-9138-f99709370657
2006-10-05 10:58:51 +00:00
target/arm/ata-pp5020.c
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
target/arm/wmcodec-pp.c
Move I2S initialisation out of the Wolfson codec driver git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11700 a1c6a512-1295-4272-9138-f99709370657
2006-12-09 19:18:18 +00:00
target/arm/i2s-pp.c
First version of a 1st/2nd gen ADC driver. 1st gen is untested yet. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14082 a1c6a512-1295-4272-9138-f99709370657
2007-07-30 20:12:03 +00:00
target/arm/ipod/adc-ipod-pcf.c
Move all iPod targets into the target tree. FS#5890 git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11129 a1c6a512-1295-4272-9138-f99709370657
2006-10-05 10:58:51 +00:00
target/arm/ipod/backlight-mini1g_mini2g.c
target/arm/ipod/button-clickwheel.c
Greyscale ipod lcd driver: * Assembler optimised low level functions. PP5002 targets benefit most (lcd_update() speedup >50%, and the greyscale overlay no longer makes mp3 playback skip). * Consistent brace placement style. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16060 a1c6a512-1295-4272-9138-f99709370657
2008-01-12 00:59:18 +00:00
target/arm/ipod/lcd-as-gray.S
Moved ipod LCD code to target tree. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12479 a1c6a512-1295-4272-9138-f99709370657
2007-02-25 13:11:02 +00:00
target/arm/ipod/lcd-gray.c
Move all iPod targets into the target tree. FS#5890 git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11129 a1c6a512-1295-4272-9138-f99709370657
2006-10-05 10:58:51 +00:00
target/arm/ipod/power-ipod.c
First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14375 a1c6a512-1295-4272-9138-f99709370657
2007-08-17 06:45:18 +00:00
target/arm/ipod/powermgmt-ipod-pcf.c
Firewire detection with reboot into diskmode for all iPods that support it (all but Nano and Video). * Hack for compiling iPod G3 removed. * Code cleanup. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14131 a1c6a512-1295-4272-9138-f99709370657
2007-08-01 22:44:02 +00:00
target/arm/usb-fw-pp502x.c
More exodus to the target tree for ColdFire and a bonus sorting of firmware/SOURCES. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11468 a1c6a512-1295-4272-9138-f99709370657
2006-11-08 16:13:04 +00:00
#endif /* SIMULATOR */
#endif /* IPOD_MINI2G */
Target tree support for Iriver iFP. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@11485 a1c6a512-1295-4272-9138-f99709370657
2006-11-09 22:58:35 +00:00
#ifdef IRIVER_IFP7XX
#ifndef SIMULATOR
move the iriver ifp7xx and other pnx0101 related files together in the target tree git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13207 a1c6a512-1295-4272-9138-f99709370657
2007-04-19 10:14:55 +00:00
target/arm/pnx0101/iriver-ifp7xx/adc-ifp7xx.c
target/arm/pnx0101/iriver-ifp7xx/backlight-ifp7xx.c
target/arm/pnx0101/iriver-ifp7xx/button-ifp7xx.c
target/arm/pnx0101/iriver-ifp7xx/lcd-ifp7xx.c
The target power handling code isn't meant to be compiled for the sim. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14346 a1c6a512-1295-4272-9138-f99709370657
2007-08-14 22:23:15 +00:00
target/arm/pnx0101/iriver-ifp7xx/power-ifp7xx.c
First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14375 a1c6a512-1295-4272-9138-f99709370657
2007-08-17 06:45:18 +00:00
target/arm/pnx0101/iriver-ifp7xx/powermgmt-ifp7xx.c
Seperate M:Robe crt0.S, fix the vector tables for the bootloader, and show touchscreen values on single line. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14814 a1c6a512-1295-4272-9138-f99709370657
2007-09-22 06:04:14 +00:00
target/arm/pnx0101/iriver-ifp7xx/usb-ifp7xx.c
Accept patch in FS#7751 by Catalin Patulea, move ifp port specific pcm code to a new file git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14670 a1c6a512-1295-4272-9138-f99709370657
2007-09-11 15:34:54 +00:00
#ifndef BOOTLOADER
target/arm/pnx0101/pcm-pnx0101.c
Unify PCM interface just above the hardware driver level for all targets including the sims. Perform lockout of audio callback when changing states. Weird new playback or recording trouble? Check before and after this revision first though things seem quite sound. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15006 a1c6a512-1295-4272-9138-f99709370657
2007-10-06 22:27:27 +00:00
#endif /* BOOTLOADER */
#endif /* SIMULATOR */
#endif /* IRIVER_IFP7XX */
Accept patch in FS#7751 by Catalin Patulea, move ifp port specific pcm code to a new file git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14670 a1c6a512-1295-4272-9138-f99709370657
2007-09-11 15:34:54 +00:00
Initial work on a port to the Logik DAX 1GB MP3/DAB player. The bootloader build compiles and runs (but only displays some debugging info), and the LCD and ADC drivers are working. Two different bootloader builds are possible: 1) The default build is just a test application for uploading to the device via tcctool; 2) Adding -DTCCBOOT to EXTRA_DEFINES in the build directory Makefile will compile the bootloader so that it can be appended to the end of the original firmware and installed on the device, dual-booting. This commit also includes some work by Hein-Pieter van Braam on a port to the iAudio 7, but that doesn't build yet. A large part of these ports will be generic to all TCC77x devices - see the TelechipsInfo wiki page for some other devices with this CPU. NOTE: Compiling these builds requires an arm-elf-gcc with armv5 support - the current version of rockboxdev.sh compiles such a gcc. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15339 a1c6a512-1295-4272-9138-f99709370657
2007-10-28 11:08:10 +00:00
#ifdef LOGIK_DAX
#ifndef SIMULATOR
Update the Telechips NAND driver to use the nand_identify() function introduced in r18052. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18063 a1c6a512-1295-4272-9138-f99709370657
2008-07-15 21:32:20 +00:00
drivers/nand_id.c
Add e200v2 and m200v2 targets. Move the telechips lcd-ssd1815.c (currently used by Logik DAX and m200v1 ports) driver up in the target tree and share with the m200v2 - as2525 parts contributed by Rafael Carre. Includes the start (but is still very incomplete) of an LCD driver for the e200v2. m200v2 is not yet fully supported by mkamsboot - that will come soon. Also some minor cleanups for the Clip. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18836 a1c6a512-1295-4272-9138-f99709370657
2008-10-19 14:11:01 +00:00
target/arm/lcd-ssd1815.c
Initial work on a port to the Logik DAX 1GB MP3/DAB player. The bootloader build compiles and runs (but only displays some debugging info), and the LCD and ADC drivers are working. Two different bootloader builds are possible: 1) The default build is just a test application for uploading to the device via tcctool; 2) Adding -DTCCBOOT to EXTRA_DEFINES in the build directory Makefile will compile the bootloader so that it can be appended to the end of the original firmware and installed on the device, dual-booting. This commit also includes some work by Hein-Pieter van Braam on a port to the iAudio 7, but that doesn't build yet. A large part of these ports will be generic to all TCC77x devices - see the TelechipsInfo wiki page for some other devices with this CPU. NOTE: Compiling these builds requires an arm-elf-gcc with armv5 support - the current version of rockboxdev.sh compiles such a gcc. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15339 a1c6a512-1295-4272-9138-f99709370657
2007-10-28 11:08:10 +00:00
target/arm/tcc77x/adc-tcc77x.c
Add the Sansa M200 (v1) as a target - it's extremely similar to the Logik DAX (the LCD driver worked unchanged). Plus various tcc77x work, including a working tick interrupt (enabled in the bootloader). Rockbox itself builds for the M200 (there are no keymaps yet for the DAX), but doesn't progress very far due to the lack of an ATA (NAND flash) driver. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17306 a1c6a512-1295-4272-9138-f99709370657
2008-05-02 19:12:09 +00:00
target/arm/tcc77x/kernel-tcc77x.c
target/arm/tcc77x/powermgmt-tcc77x.c
target/arm/tcc77x/system-tcc77x.c
target/arm/tcc77x/timer-tcc77x.c
Move tcc77x/usb-tcc77x.c to usb-tcc.c as it is more general than just tcc77x (even usb-tcc is too specific, but I don't know anything better) Add #if0ed USB defines to config-cowond2.h, so experimenting with USB is easy Add dummy set_serial_descriptor() implementation to usb_core.c. This one doesn't generate a unique serial, so it must never be used for non-testing purposes. When usaed, a compiler warning will be generated git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19273 a1c6a512-1295-4272-9138-f99709370657
2008-11-30 15:43:15 +00:00
target/arm/usb-tcc.c
Button driver for Logik DAX, plus some changes to the debug info displayed in the bootloader build. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15396 a1c6a512-1295-4272-9138-f99709370657
2007-11-01 23:38:57 +00:00
target/arm/tcc77x/logikdax/button-logikdax.c
Initial work on a port to the Logik DAX 1GB MP3/DAB player. The bootloader build compiles and runs (but only displays some debugging info), and the LCD and ADC drivers are working. Two different bootloader builds are possible: 1) The default build is just a test application for uploading to the device via tcctool; 2) Adding -DTCCBOOT to EXTRA_DEFINES in the build directory Makefile will compile the bootloader so that it can be appended to the end of the original firmware and installed on the device, dual-booting. This commit also includes some work by Hein-Pieter van Braam on a port to the iAudio 7, but that doesn't build yet. A large part of these ports will be generic to all TCC77x devices - see the TelechipsInfo wiki page for some other devices with this CPU. NOTE: Compiling these builds requires an arm-elf-gcc with armv5 support - the current version of rockboxdev.sh compiles such a gcc. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15339 a1c6a512-1295-4272-9138-f99709370657
2007-10-28 11:08:10 +00:00
target/arm/tcc77x/logikdax/power-logikdax.c
Add the Sansa M200 (v1) as a target - it's extremely similar to the Logik DAX (the LCD driver worked unchanged). Plus various tcc77x work, including a working tick interrupt (enabled in the bootloader). Rockbox itself builds for the M200 (there are no keymaps yet for the DAX), but doesn't progress very far due to the lack of an ATA (NAND flash) driver. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17306 a1c6a512-1295-4272-9138-f99709370657
2008-05-02 19:12:09 +00:00
#ifndef BOOTLOADER
Trivial changes to make the main Rockbox builds for the Sansa m200 and Logik DAX ports compile. Note that some codecs are currently disabled (due to lowmem on these targets), but that needs more work and analysis to decide how much RAM we want to allocate to codecs. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18566 a1c6a512-1295-4272-9138-f99709370657
2008-09-22 19:15:18 +00:00
target/arm/wmcodec-telechips.c
Add the Sansa M200 (v1) as a target - it's extremely similar to the Logik DAX (the LCD driver worked unchanged). Plus various tcc77x work, including a working tick interrupt (enabled in the bootloader). Rockbox itself builds for the M200 (there are no keymaps yet for the DAX), but doesn't progress very far due to the lack of an ATA (NAND flash) driver. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17306 a1c6a512-1295-4272-9138-f99709370657
2008-05-02 19:12:09 +00:00
target/arm/tcc77x/debug-tcc77x.c
Initial commit of iaudio 7 port by Vitja Makarov (FS#9245). Port is at quite an advanced stage, but is troubled by the lack of a reliable NAND driver (similar to the Cowon D2 port) and is not yet suitable for non-developers. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18435 a1c6a512-1295-4272-9138-f99709370657
2008-09-06 17:50:59 +00:00
target/arm/pcm-telechips.c
Trivial changes to make the main Rockbox builds for the Sansa m200 and Logik DAX ports compile. Note that some codecs are currently disabled (due to lowmem on these targets), but that needs more work and analysis to decide how much RAM we want to allocate to codecs. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18566 a1c6a512-1295-4272-9138-f99709370657
2008-09-22 19:15:18 +00:00
target/arm/tcc77x/logikdax/audio-logikdax.c
Add the Sansa M200 (v1) as a target - it's extremely similar to the Logik DAX (the LCD driver worked unchanged). Plus various tcc77x work, including a working tick interrupt (enabled in the bootloader). Rockbox itself builds for the M200 (there are no keymaps yet for the DAX), but doesn't progress very far due to the lack of an ATA (NAND flash) driver. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17306 a1c6a512-1295-4272-9138-f99709370657
2008-05-02 19:12:09 +00:00
#endif /* BOOTLOADER */
#endif /* SIMULATOR */
#endif /* LOGIK_DAX */
#ifdef SANSA_M200
#ifndef SIMULATOR
Update the Telechips NAND driver to use the nand_identify() function introduced in r18052. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18063 a1c6a512-1295-4272-9138-f99709370657
2008-07-15 21:32:20 +00:00
drivers/nand_id.c
Add e200v2 and m200v2 targets. Move the telechips lcd-ssd1815.c (currently used by Logik DAX and m200v1 ports) driver up in the target tree and share with the m200v2 - as2525 parts contributed by Rafael Carre. Includes the start (but is still very incomplete) of an LCD driver for the e200v2. m200v2 is not yet fully supported by mkamsboot - that will come soon. Also some minor cleanups for the Clip. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18836 a1c6a512-1295-4272-9138-f99709370657
2008-10-19 14:11:01 +00:00
target/arm/lcd-ssd1815.c
Add the Sansa M200 (v1) as a target - it's extremely similar to the Logik DAX (the LCD driver worked unchanged). Plus various tcc77x work, including a working tick interrupt (enabled in the bootloader). Rockbox itself builds for the M200 (there are no keymaps yet for the DAX), but doesn't progress very far due to the lack of an ATA (NAND flash) driver. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17306 a1c6a512-1295-4272-9138-f99709370657
2008-05-02 19:12:09 +00:00
target/arm/tcc77x/adc-tcc77x.c
target/arm/tcc77x/kernel-tcc77x.c
target/arm/tcc77x/powermgmt-tcc77x.c
target/arm/tcc77x/system-tcc77x.c
target/arm/tcc77x/timer-tcc77x.c
Move tcc77x/usb-tcc77x.c to usb-tcc.c as it is more general than just tcc77x (even usb-tcc is too specific, but I don't know anything better) Add #if0ed USB defines to config-cowond2.h, so experimenting with USB is easy Add dummy set_serial_descriptor() implementation to usb_core.c. This one doesn't generate a unique serial, so it must never be used for non-testing purposes. When usaed, a compiler warning will be generated git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19273 a1c6a512-1295-4272-9138-f99709370657
2008-11-30 15:43:15 +00:00
target/arm/usb-tcc.c
Add the Sansa M200 (v1) as a target - it's extremely similar to the Logik DAX (the LCD driver worked unchanged). Plus various tcc77x work, including a working tick interrupt (enabled in the bootloader). Rockbox itself builds for the M200 (there are no keymaps yet for the DAX), but doesn't progress very far due to the lack of an ATA (NAND flash) driver. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17306 a1c6a512-1295-4272-9138-f99709370657
2008-05-02 19:12:09 +00:00
target/arm/tcc77x/m200/button-m200.c
target/arm/tcc77x/m200/power-m200.c
#ifndef BOOTLOADER
Trivial changes to make the main Rockbox builds for the Sansa m200 and Logik DAX ports compile. Note that some codecs are currently disabled (due to lowmem on these targets), but that needs more work and analysis to decide how much RAM we want to allocate to codecs. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18566 a1c6a512-1295-4272-9138-f99709370657
2008-09-22 19:15:18 +00:00
target/arm/wmcodec-telechips.c
Add the Sansa M200 (v1) as a target - it's extremely similar to the Logik DAX (the LCD driver worked unchanged). Plus various tcc77x work, including a working tick interrupt (enabled in the bootloader). Rockbox itself builds for the M200 (there are no keymaps yet for the DAX), but doesn't progress very far due to the lack of an ATA (NAND flash) driver. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17306 a1c6a512-1295-4272-9138-f99709370657
2008-05-02 19:12:09 +00:00
target/arm/tcc77x/debug-tcc77x.c
Initial commit of iaudio 7 port by Vitja Makarov (FS#9245). Port is at quite an advanced stage, but is troubled by the lack of a reliable NAND driver (similar to the Cowon D2 port) and is not yet suitable for non-developers. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18435 a1c6a512-1295-4272-9138-f99709370657
2008-09-06 17:50:59 +00:00
target/arm/pcm-telechips.c
Trivial changes to make the main Rockbox builds for the Sansa m200 and Logik DAX ports compile. Note that some codecs are currently disabled (due to lowmem on these targets), but that needs more work and analysis to decide how much RAM we want to allocate to codecs. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18566 a1c6a512-1295-4272-9138-f99709370657
2008-09-22 19:15:18 +00:00
target/arm/tcc77x/m200/audio-m200.c
Add the Sansa M200 (v1) as a target - it's extremely similar to the Logik DAX (the LCD driver worked unchanged). Plus various tcc77x work, including a working tick interrupt (enabled in the bootloader). Rockbox itself builds for the M200 (there are no keymaps yet for the DAX), but doesn't progress very far due to the lack of an ATA (NAND flash) driver. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17306 a1c6a512-1295-4272-9138-f99709370657
2008-05-02 19:12:09 +00:00
#endif /* BOOTLOADER */
Initial work on a port to the Logik DAX 1GB MP3/DAB player. The bootloader build compiles and runs (but only displays some debugging info), and the LCD and ADC drivers are working. Two different bootloader builds are possible: 1) The default build is just a test application for uploading to the device via tcctool; 2) Adding -DTCCBOOT to EXTRA_DEFINES in the build directory Makefile will compile the bootloader so that it can be appended to the end of the original firmware and installed on the device, dual-booting. This commit also includes some work by Hein-Pieter van Braam on a port to the iAudio 7, but that doesn't build yet. A large part of these ports will be generic to all TCC77x devices - see the TelechipsInfo wiki page for some other devices with this CPU. NOTE: Compiling these builds requires an arm-elf-gcc with armv5 support - the current version of rockboxdev.sh compiles such a gcc. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15339 a1c6a512-1295-4272-9138-f99709370657
2007-10-28 11:08:10 +00:00
#endif /* SIMULATOR */
Add the Sansa c100 as a build target with basic drivers. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17742 a1c6a512-1295-4272-9138-f99709370657
2008-06-21 15:18:36 +00:00
#endif /* SANSA_M200 */
#ifdef SANSA_C100
#ifndef SIMULATOR
Update the Telechips NAND driver to use the nand_identify() function introduced in r18052. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18063 a1c6a512-1295-4272-9138-f99709370657
2008-07-15 21:32:20 +00:00
drivers/nand_id.c
Add the Sansa c100 as a build target with basic drivers. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17742 a1c6a512-1295-4272-9138-f99709370657
2008-06-21 15:18:36 +00:00
target/arm/tcc77x/adc-tcc77x.c
target/arm/tcc77x/kernel-tcc77x.c
target/arm/tcc77x/c100/lcd-S6B33B2.c
target/arm/tcc77x/powermgmt-tcc77x.c
target/arm/tcc77x/system-tcc77x.c
target/arm/tcc77x/timer-tcc77x.c
Move tcc77x/usb-tcc77x.c to usb-tcc.c as it is more general than just tcc77x (even usb-tcc is too specific, but I don't know anything better) Add #if0ed USB defines to config-cowond2.h, so experimenting with USB is easy Add dummy set_serial_descriptor() implementation to usb_core.c. This one doesn't generate a unique serial, so it must never be used for non-testing purposes. When usaed, a compiler warning will be generated git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19273 a1c6a512-1295-4272-9138-f99709370657
2008-11-30 15:43:15 +00:00
target/arm/usb-tcc.c
Add the Sansa c100 as a build target with basic drivers. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17742 a1c6a512-1295-4272-9138-f99709370657
2008-06-21 15:18:36 +00:00
target/arm/tcc77x/c100/button-c100.c
target/arm/tcc77x/c100/power-c100.c
#ifndef BOOTLOADER
target/arm/tcc77x/debug-tcc77x.c
Initial commit of iaudio 7 port by Vitja Makarov (FS#9245). Port is at quite an advanced stage, but is troubled by the lack of a reliable NAND driver (similar to the Cowon D2 port) and is not yet suitable for non-developers. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18435 a1c6a512-1295-4272-9138-f99709370657
2008-09-06 17:50:59 +00:00
target/arm/pcm-telechips.c
Add the Sansa c100 as a build target with basic drivers. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17742 a1c6a512-1295-4272-9138-f99709370657
2008-06-21 15:18:36 +00:00
#endif /* BOOTLOADER */
#endif /* SIMULATOR */
#endif /* SANSA_C100 */
Initial work on a port to the Logik DAX 1GB MP3/DAB player. The bootloader build compiles and runs (but only displays some debugging info), and the LCD and ADC drivers are working. Two different bootloader builds are possible: 1) The default build is just a test application for uploading to the device via tcctool; 2) Adding -DTCCBOOT to EXTRA_DEFINES in the build directory Makefile will compile the bootloader so that it can be appended to the end of the original firmware and installed on the device, dual-booting. This commit also includes some work by Hein-Pieter van Braam on a port to the iAudio 7, but that doesn't build yet. A large part of these ports will be generic to all TCC77x devices - see the TelechipsInfo wiki page for some other devices with this CPU. NOTE: Compiling these builds requires an arm-elf-gcc with armv5 support - the current version of rockboxdev.sh compiles such a gcc. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15339 a1c6a512-1295-4272-9138-f99709370657
2007-10-28 11:08:10 +00:00
Add e200v2 and m200v2 targets. Move the telechips lcd-ssd1815.c (currently used by Logik DAX and m200v1 ports) driver up in the target tree and share with the m200v2 - as2525 parts contributed by Rafael Carre. Includes the start (but is still very incomplete) of an LCD driver for the e200v2. m200v2 is not yet fully supported by mkamsboot - that will come soon. Also some minor cleanups for the Clip. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18836 a1c6a512-1295-4272-9138-f99709370657
2008-10-19 14:11:01 +00:00
#ifdef SANSA_CLIP
#ifndef SIMULATOR
target/arm/as3525/sansa-clip/lcd-ssd1303.c
Sansa Clip: grey lib support (not calibrated yet) Declare HAVE_LCD_INVERT Put the framebuffer into IRAM git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19249 a1c6a512-1295-4272-9138-f99709370657
2008-11-27 21:07:54 +00:00
target/arm/as3525/sansa-clip/lcd-as-clip.S
Add e200v2 and m200v2 targets. Move the telechips lcd-ssd1815.c (currently used by Logik DAX and m200v1 ports) driver up in the target tree and share with the m200v2 - as2525 parts contributed by Rafael Carre. Includes the start (but is still very incomplete) of an LCD driver for the e200v2. m200v2 is not yet fully supported by mkamsboot - that will come soon. Also some minor cleanups for the Clip. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18836 a1c6a512-1295-4272-9138-f99709370657
2008-10-19 14:11:01 +00:00
target/arm/as3525/sansa-clip/button-clip.c
Clip: add backlight and buttonlight code Revive lcd_enable() as well, and use it in _backlight_on/off() Don't update the lcd framebuffer if the display is off git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18952 a1c6a512-1295-4272-9138-f99709370657
2008-10-31 22:02:41 +00:00
target/arm/as3525/sansa-clip/backlight-clip.c
Move Clip specific power management stuff (specifically the battery discarge curve) to powermgmt-clip.c git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19303 a1c6a512-1295-4272-9138-f99709370657
2008-12-02 19:50:31 +00:00
#ifndef BOOTLOADER
Sansa Clip: enable battery charging. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20006 a1c6a512-1295-4272-9138-f99709370657
2009-02-14 16:19:21 +00:00
target/arm/powermgmt-ascodec.c
Move Clip specific power management stuff (specifically the battery discarge curve) to powermgmt-clip.c git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19303 a1c6a512-1295-4272-9138-f99709370657
2008-12-02 19:50:31 +00:00
target/arm/as3525/sansa-clip/powermgmt-clip.c
#endif /* !BOOTLOADER */
Add e200v2 and m200v2 targets. Move the telechips lcd-ssd1815.c (currently used by Logik DAX and m200v1 ports) driver up in the target tree and share with the m200v2 - as2525 parts contributed by Rafael Carre. Includes the start (but is still very incomplete) of an LCD driver for the e200v2. m200v2 is not yet fully supported by mkamsboot - that will come soon. Also some minor cleanups for the Clip. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18836 a1c6a512-1295-4272-9138-f99709370657
2008-10-19 14:11:01 +00:00
#endif /* !SIMULATOR */
#endif /* SANSA_CLIP */
#ifdef SANSA_E200V2
#ifndef SIMULATOR
target/arm/as3525/sansa-e200v2/lcd-e200v2.c
target/arm/as3525/sansa-e200v2/button-e200v2.c
Unify the e200v2 and Fuze backlight/buttonlight code - it is identical. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18966 a1c6a512-1295-4272-9138-f99709370657
2008-11-01 22:05:35 +00:00
target/arm/as3525/backlight-e200v2-fuze.c
Move Clip specific power management stuff (specifically the battery discarge curve) to powermgmt-clip.c git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19303 a1c6a512-1295-4272-9138-f99709370657
2008-12-02 19:50:31 +00:00
#ifndef BOOTLOADER
FS#9968: Charging on e200v2 git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20465 a1c6a512-1295-4272-9138-f99709370657
2009-03-22 19:06:54 +00:00
target/arm/powermgmt-ascodec.c
target/arm/as3525/sansa-e200v2/powermgmt-e200v2.c
Move Clip specific power management stuff (specifically the battery discarge curve) to powermgmt-clip.c git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19303 a1c6a512-1295-4272-9138-f99709370657
2008-12-02 19:50:31 +00:00
#endif /* !BOOTLOADER */
Add e200v2 and m200v2 targets. Move the telechips lcd-ssd1815.c (currently used by Logik DAX and m200v1 ports) driver up in the target tree and share with the m200v2 - as2525 parts contributed by Rafael Carre. Includes the start (but is still very incomplete) of an LCD driver for the e200v2. m200v2 is not yet fully supported by mkamsboot - that will come soon. Also some minor cleanups for the Clip. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18836 a1c6a512-1295-4272-9138-f99709370657
2008-10-19 14:11:01 +00:00
#endif /* !SIMULATOR */
#endif /* SANSA_E200V2 */
Commit FS#9679 by Thomas Martitz. Adds c200v2 to the target tree. Has some buttons defined, a bootloader, and stubs for most drivers. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19574 a1c6a512-1295-4272-9138-f99709370657
2008-12-24 04:10:18 +00:00
#ifdef SANSA_C200V2
#ifndef SIMULATOR
target/arm/as3525/sansa-c200v2/lcd-c200v2.c
target/arm/as3525/sansa-c200v2/button-c200v2.c
target/arm/as3525/sansa-c200v2/backlight-c200v2.c
#ifndef BOOTLOADER
target/arm/as3525/powermgmt-as3525.c
#endif /* !BOOTLOADER */
#endif /* !SIMULATOR */
#endif /* SANSA_E200V2 */
"mv m200v2 m200v4" git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19060 a1c6a512-1295-4272-9138-f99709370657
2008-11-10 09:27:40 +00:00
#ifdef SANSA_M200V4
Add e200v2 and m200v2 targets. Move the telechips lcd-ssd1815.c (currently used by Logik DAX and m200v1 ports) driver up in the target tree and share with the m200v2 - as2525 parts contributed by Rafael Carre. Includes the start (but is still very incomplete) of an LCD driver for the e200v2. m200v2 is not yet fully supported by mkamsboot - that will come soon. Also some minor cleanups for the Clip. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18836 a1c6a512-1295-4272-9138-f99709370657
2008-10-19 14:11:01 +00:00
#ifndef SIMULATOR
target/arm/lcd-ssd1815.c
"mv m200v2 m200v4" git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19060 a1c6a512-1295-4272-9138-f99709370657
2008-11-10 09:27:40 +00:00
target/arm/as3525/sansa-m200v4/button-m200v4.c
Move Clip specific power management stuff (specifically the battery discarge curve) to powermgmt-clip.c git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19303 a1c6a512-1295-4272-9138-f99709370657
2008-12-02 19:50:31 +00:00
#ifndef BOOTLOADER
correct battery readout for m200v4. Percentage is still uncalibrated. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19420 a1c6a512-1295-4272-9138-f99709370657
2008-12-13 15:57:41 +00:00
target/arm/as3525/sansa-m200v4/powermgmt-m200v4.c
Move Clip specific power management stuff (specifically the battery discarge curve) to powermgmt-clip.c git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19303 a1c6a512-1295-4272-9138-f99709370657
2008-12-02 19:50:31 +00:00
#endif /* !BOOTLOADER */
Add e200v2 and m200v2 targets. Move the telechips lcd-ssd1815.c (currently used by Logik DAX and m200v1 ports) driver up in the target tree and share with the m200v2 - as2525 parts contributed by Rafael Carre. Includes the start (but is still very incomplete) of an LCD driver for the e200v2. m200v2 is not yet fully supported by mkamsboot - that will come soon. Also some minor cleanups for the Clip. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18836 a1c6a512-1295-4272-9138-f99709370657
2008-10-19 14:11:01 +00:00
#endif /* !SIMULATOR */
"mv m200v2 m200v4" git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19060 a1c6a512-1295-4272-9138-f99709370657
2008-11-10 09:27:40 +00:00
#endif /* SANSA_M200V4 */
Add e200v2 and m200v2 targets. Move the telechips lcd-ssd1815.c (currently used by Logik DAX and m200v1 ports) driver up in the target tree and share with the m200v2 - as2525 parts contributed by Rafael Carre. Includes the start (but is still very incomplete) of an LCD driver for the e200v2. m200v2 is not yet fully supported by mkamsboot - that will come soon. Also some minor cleanups for the Clip. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18836 a1c6a512-1295-4272-9138-f99709370657
2008-10-19 14:11:01 +00:00
Add Sansa Fuze to the build system, including a first (untested) attempt at an LCD driver. Lots of things are just copied from the e200v2, so this code needs testing, and then drivers properly merged if they prove to be the same. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18957 a1c6a512-1295-4272-9138-f99709370657
2008-11-01 10:29:23 +00:00
#ifdef SANSA_FUZE
#ifndef SIMULATOR
target/arm/as3525/sansa-fuze/button-fuze.c
target/arm/as3525/sansa-fuze/lcd-fuze.c
Unify the e200v2 and Fuze backlight/buttonlight code - it is identical. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18966 a1c6a512-1295-4272-9138-f99709370657
2008-11-01 22:05:35 +00:00
target/arm/as3525/backlight-e200v2-fuze.c
Move Clip specific power management stuff (specifically the battery discarge curve) to powermgmt-clip.c git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19303 a1c6a512-1295-4272-9138-f99709370657
2008-12-02 19:50:31 +00:00
#ifndef BOOTLOADER
target/arm/as3525/powermgmt-as3525.c
#endif /* !BOOTLOADER */
Add Sansa Fuze to the build system, including a first (untested) attempt at an LCD driver. Lots of things are just copied from the e200v2, so this code needs testing, and then drivers properly merged if they prove to be the same. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18957 a1c6a512-1295-4272-9138-f99709370657
2008-11-01 10:29:23 +00:00
#endif /* !SIMULATOR */
#endif /* SANSA_FUZE */
Initial work on a port to the Logik DAX 1GB MP3/DAB player. The bootloader build compiles and runs (but only displays some debugging info), and the LCD and ADC drivers are working. Two different bootloader builds are possible: 1) The default build is just a test application for uploading to the device via tcctool; 2) Adding -DTCCBOOT to EXTRA_DEFINES in the build directory Makefile will compile the bootloader so that it can be appended to the end of the original firmware and installed on the device, dual-booting. This commit also includes some work by Hein-Pieter van Braam on a port to the iAudio 7, but that doesn't build yet. A large part of these ports will be generic to all TCC77x devices - see the TelechipsInfo wiki page for some other devices with this CPU. NOTE: Compiling these builds requires an arm-elf-gcc with armv5 support - the current version of rockboxdev.sh compiles such a gcc. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15339 a1c6a512-1295-4272-9138-f99709370657
2007-10-28 11:08:10 +00:00
#ifdef IAUDIO_7
#ifndef SIMULATOR
Update the Telechips NAND driver to use the nand_identify() function introduced in r18052. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18063 a1c6a512-1295-4272-9138-f99709370657
2008-07-15 21:32:20 +00:00
drivers/nand_id.c
Initial commit of iaudio 7 port by Vitja Makarov (FS#9245). Port is at quite an advanced stage, but is troubled by the lack of a reliable NAND driver (similar to the Cowon D2 port) and is not yet suitable for non-developers. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18435 a1c6a512-1295-4272-9138-f99709370657
2008-09-06 17:50:59 +00:00
drivers/pcf50606.c
iaudio7: add battery voltage monitoring git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19549 a1c6a512-1295-4272-9138-f99709370657
2008-12-21 19:16:54 +00:00
target/arm/usb-tcc.c
Initial work on a port to the Logik DAX 1GB MP3/DAB player. The bootloader build compiles and runs (but only displays some debugging info), and the LCD and ADC drivers are working. Two different bootloader builds are possible: 1) The default build is just a test application for uploading to the device via tcctool; 2) Adding -DTCCBOOT to EXTRA_DEFINES in the build directory Makefile will compile the bootloader so that it can be appended to the end of the original firmware and installed on the device, dual-booting. This commit also includes some work by Hein-Pieter van Braam on a port to the iAudio 7, but that doesn't build yet. A large part of these ports will be generic to all TCC77x devices - see the TelechipsInfo wiki page for some other devices with this CPU. NOTE: Compiling these builds requires an arm-elf-gcc with armv5 support - the current version of rockboxdev.sh compiles such a gcc. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15339 a1c6a512-1295-4272-9138-f99709370657
2007-10-28 11:08:10 +00:00
target/arm/tcc77x/system-tcc77x.c
Initial commit of iaudio 7 port by Vitja Makarov (FS#9245). Port is at quite an advanced stage, but is troubled by the lack of a reliable NAND driver (similar to the Cowon D2 port) and is not yet suitable for non-developers. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18435 a1c6a512-1295-4272-9138-f99709370657
2008-09-06 17:50:59 +00:00
target/arm/tcc77x/kernel-tcc77x.c
target/arm/tcc77x/timer-tcc77x.c
target/arm/tcc77x/adc-tcc77x.c
Initial work on a port to the Logik DAX 1GB MP3/DAB player. The bootloader build compiles and runs (but only displays some debugging info), and the LCD and ADC drivers are working. Two different bootloader builds are possible: 1) The default build is just a test application for uploading to the device via tcctool; 2) Adding -DTCCBOOT to EXTRA_DEFINES in the build directory Makefile will compile the bootloader so that it can be appended to the end of the original firmware and installed on the device, dual-booting. This commit also includes some work by Hein-Pieter van Braam on a port to the iAudio 7, but that doesn't build yet. A large part of these ports will be generic to all TCC77x devices - see the TelechipsInfo wiki page for some other devices with this CPU. NOTE: Compiling these builds requires an arm-elf-gcc with armv5 support - the current version of rockboxdev.sh compiles such a gcc. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15339 a1c6a512-1295-4272-9138-f99709370657
2007-10-28 11:08:10 +00:00
target/arm/tcc77x/iaudio7/lcd-iaudio7.c
target/arm/tcc77x/iaudio7/power-iaudio7.c
iaudio7: add battery voltage monitoring git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19549 a1c6a512-1295-4272-9138-f99709370657
2008-12-21 19:16:54 +00:00
target/arm/tcc77x/iaudio7/powermgmt-iaudio7.c
Initial commit of iaudio 7 port by Vitja Makarov (FS#9245). Port is at quite an advanced stage, but is troubled by the lack of a reliable NAND driver (similar to the Cowon D2 port) and is not yet suitable for non-developers. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18435 a1c6a512-1295-4272-9138-f99709370657
2008-09-06 17:50:59 +00:00
target/arm/tcc77x/iaudio7/button-iaudio7.c
target/arm/tcc77x/iaudio7/ata2501.c
#ifndef BOOTLOADER
target/arm/wmcodec-telechips.c
target/arm/pcm-telechips.c
target/arm/tcc77x/debug-tcc77x.c
target/arm/tcc77x/iaudio7/audio-iaudio7.c
#endif /* BOOTLOADER */
Initial work on a port to the Logik DAX 1GB MP3/DAB player. The bootloader build compiles and runs (but only displays some debugging info), and the LCD and ADC drivers are working. Two different bootloader builds are possible: 1) The default build is just a test application for uploading to the device via tcctool; 2) Adding -DTCCBOOT to EXTRA_DEFINES in the build directory Makefile will compile the bootloader so that it can be appended to the end of the original firmware and installed on the device, dual-booting. This commit also includes some work by Hein-Pieter van Braam on a port to the iAudio 7, but that doesn't build yet. A large part of these ports will be generic to all TCC77x devices - see the TelechipsInfo wiki page for some other devices with this CPU. NOTE: Compiling these builds requires an arm-elf-gcc with armv5 support - the current version of rockboxdev.sh compiles such a gcc. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15339 a1c6a512-1295-4272-9138-f99709370657
2007-10-28 11:08:10 +00:00
#endif /* SIMULATOR */
#endif /* IAUDIO_7 */
Initial Cowon D2 commit: * bootloader test program (basic LCD & button drivers, reads touchscreen) * work-in-progress stubs for main build git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16090 a1c6a512-1295-4272-9138-f99709370657
2008-01-14 22:04:48 +00:00
#ifdef COWON_D2
#ifndef SIMULATOR
Update the Telechips NAND driver to use the nand_identify() function introduced in r18052. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18063 a1c6a512-1295-4272-9138-f99709370657
2008-07-15 21:32:20 +00:00
drivers/nand_id.c
Split out the PCF5060x register defines into a common header and create a generic pcf50606.c using standard i2c read/writes. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16966 a1c6a512-1295-4272-9138-f99709370657
2008-04-04 20:24:08 +00:00
drivers/pcf50606.c
D2: Implement LCD driver framebuffer as per E200/Gigabeat F. Kill a few warnings. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16763 a1c6a512-1295-4272-9138-f99709370657
2008-03-23 19:56:11 +00:00
target/arm/lcd-as-memframe.S
Initial Cowon D2 commit: * bootloader test program (basic LCD & button drivers, reads touchscreen) * work-in-progress stubs for main build git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16090 a1c6a512-1295-4272-9138-f99709370657
2008-01-14 22:04:48 +00:00
target/arm/tcc780x/adc-tcc780x.c
target/arm/tcc780x/system-tcc780x.c
target/arm/tcc780x/cowond2/button-cowond2.c
target/arm/tcc780x/cowond2/lcd-cowond2.c
target/arm/tcc780x/cowond2/power-cowond2.c
target/arm/tcc780x/cowond2/powermgmt-cowond2.c
D2: Adjustable backlight brightness (sometimes fails when boosted, suggests I2C timing needs adjustment). Tweak lcd_enable() to behave more like other targets. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16967 a1c6a512-1295-4272-9138-f99709370657
2008-04-04 20:55:58 +00:00
target/arm/tcc780x/cowond2/backlight-cowond2.c
Move tcc77x/usb-tcc77x.c to usb-tcc.c as it is more general than just tcc77x (even usb-tcc is too specific, but I don't know anything better) Add #if0ed USB defines to config-cowond2.h, so experimenting with USB is easy Add dummy set_serial_descriptor() implementation to usb_core.c. This one doesn't generate a unique serial, so it must never be used for non-testing purposes. When usaed, a compiler warning will be generated git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19273 a1c6a512-1295-4272-9138-f99709370657
2008-11-30 15:43:15 +00:00
target/arm/usb-tcc.c
Initial Cowon D2 commit: * bootloader test program (basic LCD & button drivers, reads touchscreen) * work-in-progress stubs for main build git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16090 a1c6a512-1295-4272-9138-f99709370657
2008-01-14 22:04:48 +00:00
#ifndef BOOTLOADER
D2: Implement LCD driver framebuffer as per E200/Gigabeat F. Kill a few warnings. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16763 a1c6a512-1295-4272-9138-f99709370657
2008-03-23 19:56:11 +00:00
target/arm/tcc780x/kernel-tcc780x.c
target/arm/tcc780x/timer-tcc780x.c
Initial Cowon D2 commit: * bootloader test program (basic LCD & button drivers, reads touchscreen) * work-in-progress stubs for main build git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16090 a1c6a512-1295-4272-9138-f99709370657
2008-01-14 22:04:48 +00:00
target/arm/wmcodec-telechips.c
target/arm/tcc780x/debug-tcc780x.c
Initial commit of iaudio 7 port by Vitja Makarov (FS#9245). Port is at quite an advanced stage, but is troubled by the lack of a reliable NAND driver (similar to the Cowon D2 port) and is not yet suitable for non-developers. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18435 a1c6a512-1295-4272-9138-f99709370657
2008-09-06 17:50:59 +00:00
target/arm/pcm-telechips.c
Initial D2 sound playback support (known issues to follow on the CowonD2Info wiki page). git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17753 a1c6a512-1295-4272-9138-f99709370657
2008-06-22 18:48:22 +00:00
target/arm/tcc780x/cowond2/audio-cowond2.c
Initial Cowon D2 commit: * bootloader test program (basic LCD & button drivers, reads touchscreen) * work-in-progress stubs for main build git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16090 a1c6a512-1295-4272-9138-f99709370657
2008-01-14 22:04:48 +00:00
#endif /* BOOTLOADER */
#endif /* SIMULATOR */
#endif /* COWON_D2 */
initial Meizu M6SL port (take 2) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17819 a1c6a512-1295-4272-9138-f99709370657
2008-06-27 23:24:34 +00:00
add Meizu M6SP and M3 ports git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18544 a1c6a512-1295-4272-9138-f99709370657
2008-09-17 23:22:11 +00:00
#if CONFIG_CPU==S5L8700
initial Meizu M6SL port (take 2) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17819 a1c6a512-1295-4272-9138-f99709370657
2008-06-27 23:24:34 +00:00
target/arm/s5l8700/system-s5l8700.c
add Meizu M6SP and M3 ports git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18544 a1c6a512-1295-4272-9138-f99709370657
2008-09-17 23:22:11 +00:00
#endif
#ifdef MEIZU_M6SL
initial Meizu M6SL port (take 2) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17819 a1c6a512-1295-4272-9138-f99709370657
2008-06-27 23:24:34 +00:00
target/arm/s5l8700/meizu-m6sl/lcd-m6sl.c
* move qt1106 specific things to their own files * use CHANGE pin git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18496 a1c6a512-1295-4272-9138-f99709370657
2008-09-11 18:18:40 +00:00
drivers/qt1106.c
initial Meizu M6SL port (take 2) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17819 a1c6a512-1295-4272-9138-f99709370657
2008-06-27 23:24:34 +00:00
#ifndef SIMULATOR
#ifndef BOOTLOADER
#endif /* BOOTLOADER */
#endif /* SIMULATOR */
#endif /* MEIZU_M6SL */
Add preliminary support for the Onda VX747 (MIPS target) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18032 a1c6a512-1295-4272-9138-f99709370657
2008-07-14 15:03:10 +00:00
add Meizu M6SP and M3 ports git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18544 a1c6a512-1295-4272-9138-f99709370657
2008-09-17 23:22:11 +00:00
#ifdef MEIZU_M6SP
target/arm/s5l8700/meizu-m6sp/lcd-m6sp.c
#ifndef SIMULATOR
#ifndef BOOTLOADER
#endif /* BOOTLOADER */
#endif /* SIMULATOR */
#endif /* MEIZU_M6SP */
#ifdef MEIZU_M3
target/arm/s5l8700/meizu-m3/lcd-m3.c
drivers/qt1106.c
#ifndef SIMULATOR
#ifndef BOOTLOADER
#endif /* BOOTLOADER */
#endif /* SIMULATOR */
#endif /* MEIZU_M3 */
Make Onda VX767 compile + restructure firmware/SOURCES a bit (wrt Jz4740 specific files) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20297 a1c6a512-1295-4272-9138-f99709370657
2009-03-11 22:12:23 +00:00
#ifndef SIMULATOR
#if CONFIG_CPU == JZ4732
Onda VX747: 1) Improve touchscreen handling 2) Add RTC driver 4) Add NAND Flash ID scanning 3) Other minor fixes Nand_ID: Add a generic NAND ID database (currently only containg Samsung chips) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18052 a1c6a512-1295-4272-9138-f99709370657
2008-07-15 17:17:01 +00:00
target/mips/ingenic_jz47xx/ata-nand-jz4740.c
Onda VX747: * Commit (premature) SD, USB & audio drivers * Fix ramdisk.c mistake * Add battery readout git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19011 a1c6a512-1295-4272-9138-f99709370657
2008-11-05 00:24:46 +00:00
target/mips/ingenic_jz47xx/ata-sd-jz4740.c
Onda VX747: commit some parts to get apps/ to compile (more will follow) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19954 a1c6a512-1295-4272-9138-f99709370657
2009-02-09 10:02:38 +00:00
target/mips/ingenic_jz47xx/debug-jz4740.c
* Add interrupt handling (but still not working) * Clean up linker script and bootup routines git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18229 a1c6a512-1295-4272-9138-f99709370657
2008-08-09 23:31:38 +00:00
target/mips/ingenic_jz47xx/kernel-jz4740.c
Onda VX747: * Implement lcd_flip() * Add support for multiple banks in NAND driver * Add basic I²C driver (untested) * Get audio back working * Add power driver * Other minor fixes and cleanups git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19863 a1c6a512-1295-4272-9138-f99709370657
2009-01-27 00:38:58 +00:00
target/mips/ingenic_jz47xx/i2c-jz4740.c
Onda VX747: * Commit (premature) SD, USB & audio drivers * Fix ramdisk.c mistake * Add battery readout git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19011 a1c6a512-1295-4272-9138-f99709370657
2008-11-05 00:24:46 +00:00
target/mips/ingenic_jz47xx/lcd-jz4740.c
Add preliminary support for the Onda VX747 (MIPS target) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18032 a1c6a512-1295-4272-9138-f99709370657
2008-07-14 15:03:10 +00:00
target/mips/ingenic_jz47xx/system-jz4740.c
Onda VX747: * Overall cleanup (still needs work) * Add preliminary USB support * Add power off support * Add preliminary MMU handling git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18348 a1c6a512-1295-4272-9138-f99709370657
2008-08-26 21:48:49 +00:00
target/mips/ingenic_jz47xx/usb-jz4740.c
Actually kill them.. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20418 a1c6a512-1295-4272-9138-f99709370657
2009-03-20 23:15:38 +00:00
target/mips/ingenic_jz47xx/timer-jz4740.c
Fix Onda VX747 bootloader build git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20154 a1c6a512-1295-4272-9138-f99709370657
2009-03-01 16:52:57 +00:00
#ifndef BOOTLOADER
target/mips/ingenic_jz47xx/codec-jz4740.c
target/mips/ingenic_jz47xx/pcm-jz4740.c
Make Onda VX767 compile + restructure firmware/SOURCES a bit (wrt Jz4740 specific files) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20297 a1c6a512-1295-4272-9138-f99709370657
2009-03-11 22:12:23 +00:00
#endif /* BOOTLOADER */
Onda VX747: 1) Improve touchscreen handling 2) Add RTC driver 4) Add NAND Flash ID scanning 3) Other minor fixes Nand_ID: Add a generic NAND ID database (currently only containg Samsung chips) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18052 a1c6a512-1295-4272-9138-f99709370657
2008-07-15 17:17:01 +00:00
drivers/nand_id.c
Make Onda VX767 compile + restructure firmware/SOURCES a bit (wrt Jz4740 specific files) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20297 a1c6a512-1295-4272-9138-f99709370657
2009-03-11 22:12:23 +00:00
#endif /* CONFIG_CPU == JZ4732 */
Add preliminary support for the Onda VX747 (MIPS target) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18032 a1c6a512-1295-4272-9138-f99709370657
2008-07-14 15:03:10 +00:00
Make Onda VX767 compile + restructure firmware/SOURCES a bit (wrt Jz4740 specific files) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20297 a1c6a512-1295-4272-9138-f99709370657
2009-03-11 22:12:23 +00:00
#if defined(ONDA_VX747) || defined(ONDA_VX747P)
* Onda VX767: fix some redundant files + add some missing functions for apps/ compilation (still needs keymap though). * Add Onda VX767 SADC driver * Unify Onda VX747(+) and Onda VX767 backlight driver * Also be more consistent wrt file naming. * Add speaker-onda_vx747.c to SOURCES (forgot to commit this) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20259 a1c6a512-1295-4272-9138-f99709370657
2009-03-09 21:26:39 +00:00
target/mips/ingenic_jz47xx/onda_vx747/backlight-onda_vx7X7.c
Add preliminary support for the Onda VX747 (MIPS target) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18032 a1c6a512-1295-4272-9138-f99709370657
2008-07-14 15:03:10 +00:00
target/mips/ingenic_jz47xx/onda_vx747/lcd-onda_vx747.c
Onda VX747: * Implement lcd_flip() * Add support for multiple banks in NAND driver * Add basic I²C driver (untested) * Get audio back working * Add power driver * Other minor fixes and cleanups git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19863 a1c6a512-1295-4272-9138-f99709370657
2009-01-27 00:38:58 +00:00
target/mips/ingenic_jz47xx/onda_vx747/power-onda_vx747.c
Make Onda VX767 compile + restructure firmware/SOURCES a bit (wrt Jz4740 specific files) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20297 a1c6a512-1295-4272-9138-f99709370657
2009-03-11 22:12:23 +00:00
target/mips/ingenic_jz47xx/onda_vx747/sadc-onda_vx747.c
* Onda VX767: fix some redundant files + add some missing functions for apps/ compilation (still needs keymap though). * Add Onda VX767 SADC driver * Unify Onda VX747(+) and Onda VX767 backlight driver * Also be more consistent wrt file naming. * Add speaker-onda_vx747.c to SOURCES (forgot to commit this) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20259 a1c6a512-1295-4272-9138-f99709370657
2009-03-09 21:26:39 +00:00
target/mips/ingenic_jz47xx/onda_vx747/speaker-onda_vx747.c
Make Onda VX767 compile + restructure firmware/SOURCES a bit (wrt Jz4740 specific files) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20297 a1c6a512-1295-4272-9138-f99709370657
2009-03-11 22:12:23 +00:00
#endif /* ONDA_VX747 || ONDA_VX747P */
Add Onda VX767 target git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18422 a1c6a512-1295-4272-9138-f99709370657
2008-09-05 15:09:40 +00:00
Make Onda VX767 compile + restructure firmware/SOURCES a bit (wrt Jz4740 specific files) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20297 a1c6a512-1295-4272-9138-f99709370657
2009-03-11 22:12:23 +00:00
#ifdef ONDA_VX767
* Onda VX767: fix some redundant files + add some missing functions for apps/ compilation (still needs keymap though). * Add Onda VX767 SADC driver * Unify Onda VX747(+) and Onda VX767 backlight driver * Also be more consistent wrt file naming. * Add speaker-onda_vx747.c to SOURCES (forgot to commit this) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20259 a1c6a512-1295-4272-9138-f99709370657
2009-03-09 21:26:39 +00:00
target/mips/ingenic_jz47xx/onda_vx747/backlight-onda_vx7X7.c
target/mips/ingenic_jz47xx/onda_vx767/button-onda_vx767.c
target/mips/ingenic_jz47xx/onda_vx767/lcd-onda_vx767.c
Make Onda VX767 compile + restructure firmware/SOURCES a bit (wrt Jz4740 specific files) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20297 a1c6a512-1295-4272-9138-f99709370657
2009-03-11 22:12:23 +00:00
target/mips/ingenic_jz47xx/onda_vx767/power-onda_vx767.c
* Onda VX767: fix some redundant files + add some missing functions for apps/ compilation (still needs keymap though). * Add Onda VX767 SADC driver * Unify Onda VX747(+) and Onda VX767 backlight driver * Also be more consistent wrt file naming. * Add speaker-onda_vx747.c to SOURCES (forgot to commit this) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20259 a1c6a512-1295-4272-9138-f99709370657
2009-03-09 21:26:39 +00:00
target/mips/ingenic_jz47xx/onda_vx767/sadc-onda_vx767.c
Make Onda VX767 compile + restructure firmware/SOURCES a bit (wrt Jz4740 specific files) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20297 a1c6a512-1295-4272-9138-f99709370657
2009-03-11 22:12:23 +00:00
#endif /* ONDA_VX767 */
Initial commit for the "Lyre prototype 1" port by Jorge Pinto from FS#10045. Bootloader builds, normal does not. git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20574 a1c6a512-1295-4272-9138-f99709370657
2009-03-30 12:20:47 +00:00
#if defined(LYRE_PROTO1)
target/arm/at91sam/lyre_proto1/adc-lyre_proto1.c
target/arm/at91sam/lyre_proto1/backlight-lyre_proto1.c
target/arm/at91sam/lyre_proto1/button-lyre_proto1.c
target/arm/at91sam/lyre_proto1/crt0.S
target/arm/at91sam/lyre_proto1/debug-lyre_proto1.c
target/arm/at91sam/lyre_proto1/kernel-lyre_proto1.c
target/arm/at91sam/lyre_proto1/lcd-lyre_proto1.c
target/arm/at91sam/lyre_proto1/system-lyre_proto1.c
target/arm/at91sam/lyre_proto1/timer-lyre_proto1.c
#endif
Make Onda VX767 compile + restructure firmware/SOURCES a bit (wrt Jz4740 specific files) git-svn-id: svn://svn.rockbox.org/rockbox/trunk@20297 a1c6a512-1295-4272-9138-f99709370657
2009-03-11 22:12:23 +00:00
#endif /* SIMULATOR */
Reference in a new issue Copy permalink