..
config
Lower the maximum brightness of the fuzev2 backlight even more.
2011-07-31 15:30:07 +00:00
adc.h
FS#10756 - Free unused init code
2010-03-03 23:20:32 +00:00
ak4537.h
akcodec.h
as3514.h
Commit FS#12111 by Stephan Grossklass. Disables output mixer auto gain control on AMSv2. Should fix occasional distortion reported when running the player at very high output levels (e.g. at or above 0dB).
2011-07-24 21:56:24 +00:00
as3525.h
Fuze V2: Fix hold switch behavior. Add a GPIOx_PIN_MASK macro to AS3525.
2011-01-20 14:26:58 +00:00
as3525v2.h
Define CACHEALIGN_BITS for missing ARM CPUs for later use.
2010-11-19 07:17:20 +00:00
ascodec.h
at91sam9260.h
ata-defines.h
Fix yellow
2011-01-02 23:09:01 +00:00
ata.h
Fix yellow
2011-01-02 23:09:01 +00:00
ata_idle_notify.h
Rockbox as an application: Replace many occurences of #ifdef SIMULATOR with #if (CONFIG_PLATFORM & PLATFORM_HOSTED) (or equivalently).
2010-06-21 16:53:00 +00:00
ata_mmc.h
audio.h
audio_peek_track should copy the struct mp3entry instead of pointing directly into the buffer. Despite the dire warning, caller does in fact yield/sleep and its usage is too nonlocalized to control that reliably.
2011-02-10 10:26:07 +00:00
audiohw.h
imx233/fuze+: huge rework
2011-07-23 11:45:22 +00:00
backlight-sw-fading.h
backlight.h
FS#10756 - Free unused init code
2010-03-03 23:20:32 +00:00
bidi.h
bitswap.h
bootchart.h
bootchart.h doesn't need _ansi.h, especially not in a relative path
2010-07-25 15:28:24 +00:00
button.h
Add support multimedia keys/buttons to the core, and adapt Rockbox on android for it (multimedia buttons are found on wired headsets and the lock screen in cyanogenmod).
2010-10-31 15:32:57 +00:00
config.h
imx233/fuze+: huge rework
2011-07-23 11:45:22 +00:00
config_caps.h
cpu.h
Rockchip rk27xx port initial commit. This is still work in progress.
2011-05-30 21:10:37 +00:00
cs42l55.h
Fix CS42L55 (iPod Classic) tone control
2011-01-07 23:09:09 +00:00
cscodec.h
New port: iPod Classic (also known as iPod 6G/6.5G/7G)
2011-01-02 23:16:27 +00:00
dac3550a.h
Separate mas35xx lowlevel stuff. Move SH specific bits to target tree. FS#11189 by me.
2010-10-31 21:09:34 +00:00
debug.h
RaaA: Add initial Pandora support
2011-02-27 23:42:37 +00:00
disk.h
Accept FS#11774 by Michael Hohmuth (with some own modifications to #ifdef conditions)
2010-11-28 15:22:51 +00:00
dm320.h
DM320: Add CPU revisions as defines.
2011-02-06 19:14:09 +00:00
ds2411.h
eeprom_24cxx.h
eeprom_settings.h
enc_base.h
events.h
FS#11263 - Radio Art support! %C and %Cl tags work in the radio screen and Base Skin when the radio is running.
2010-05-16 11:13:42 +00:00
fat.h
iPod Classic CE-ATA Support (Part 2 of 4: Remove on-stack sector buffers, and replace them with a single statically allocated sector buffer that's arbitrated amongst users)
2011-02-27 22:44:54 +00:00
filefuncs.h
struct DIR -> DIR, should fix most if not all reds.
2010-09-01 21:45:58 +00:00
fmradio.h
fmradio_i2c.h
mark some functions as init functions (discarded after init() has run)
2010-05-27 12:00:29 +00:00
font.h
Anti-Aliased Fonts support.
2011-03-05 18:36:51 +00:00
gdb_api.h
general.h
Simplify mpegplayer a bit and use array-based lists rather than linked lists for stream management. Move a couple useful functions to handle pointer arrays from kernel.c into general.c; mpeglayer now makes use of them.
2010-05-17 12:34:05 +00:00
generic_i2c.h
Apply FS #11423 - Use udelay in AMS driver for FM radio I2C
2010-06-21 21:41:07 +00:00
hangul.h
hd66789r.h
hwcompat.h
Rockbox as an application: Replace many occurences of #ifdef SIMULATOR with #if (CONFIG_PLATFORM & PLATFORM_HOSTED) (or equivalently).
2010-06-21 16:53:00 +00:00
i2c-coldfire.h
Fix more tabs
2010-01-03 10:27:43 +00:00
i2c-pp.h
i2c-rk27xx.h
Rockchip rk27xx port initial commit. This is still work in progress.
2011-05-30 21:10:37 +00:00
i2c-s5l8700.h
i2c-s5l8702.h
New port: iPod Classic (also known as iPod 6G/6.5G/7G)
2011-01-02 23:16:27 +00:00
i2c.h
imx233/fuze+: replace software i2c by hardware i2c, make some code more correct, reduce code size of lcd init sequences
2011-07-03 15:18:41 +00:00
i2s.h
iap.h
Fix return type of iap_getc (should be bool instead of int)
2010-10-24 21:39:09 +00:00
ifp_usb_serial.h
imx31l.h
Clean up multiple definitions of RAM size. Remove -DMEM (make) and MEM (code), use the already defined MEMORYSIZE instead.
2011-02-02 17:43:32 +00:00
imx233-codec.h
imx233/fuze+: huge rework
2011-07-23 11:45:22 +00:00
imx233.h
imx233/fuze+: move page table to dram
2011-07-23 13:48:01 +00:00
ipod_remote_tuner.h
iap: pass length and data pointer to iap_handlepkt functions, this prepares for iap large packet support.
2011-05-02 21:55:13 +00:00
isp1362.h
isp1583.h
jz4740-codec.h
jz4740.h
jz_mxu.h
kernel.h
Get rid of a committed #define from kernel.h that didn't make the final cut. Put voice_wait in voice_thread.h where it ought.
2011-04-27 04:00:48 +00:00
lcd-charcell.h
lcd-remote.h
Forgot to update lcd-remote.h
2010-10-11 01:23:40 +00:00
lcd.h
Touchscreen: Improved scroll threshold
2010-11-10 15:25:15 +00:00
led.h
load_code.h
Extend lc_open() to also being able to load overlay plugins.
2010-09-09 16:17:21 +00:00
logf.h
Move some gcc extensions to new gcc_extensions.h header
2010-07-25 14:44:29 +00:00
ltv350qv.h
lv24020lp.h
Signal strength meter for FM radio - FS#8151 by Przemysław Hołubowski
2010-11-11 21:13:29 +00:00
m5636.h
m66591.h
mas35xx.h
Separate mas35xx lowlevel stuff. Move SH specific bits to target tree. FS#11189 by me.
2010-10-31 21:09:34 +00:00
mascodec.h
Separate mas35xx lowlevel stuff. Move SH specific bits to target tree. FS#11189 by me.
2010-10-31 21:09:34 +00:00
mc13783.h
i.MX31/Gigabeat S: Actually enable DPTC which can set optimal voltage for 528MHz. Requires an SPI and PMIC interface rework because of the low-latency needs for the DPTC to work best with minimal panicing. SPI can work with multitasking and asynchronously from interrupt handlers or normal code.
2010-05-04 10:07:53 +00:00
mcf5249.h
mcf5250.h
mips-archdefs.h
mips.h
mipsregs.h
mmc.h
mp3_playback.h
mv.h
nand.h
nand_id.h
ohci.h
panic.h
Move some gcc extensions to new gcc_extensions.h header
2010-07-25 14:44:29 +00:00
pcf5060x.h
pcf5063x.h
pcf50605.h
pcf50606.h
pcf50635.h
pcm-internal.h
Use playback channel directly for peakmeters and plugins using peak calculation. Also, for now, don't allow mixer playback to overlap recording, even if full duplex works.
2011-07-02 11:55:38 +00:00
pcm.h
Commit FS#12150 - Fully-functional audio mixer - and finally whip old limitations about playback of voice and other sounds when paused. Channels are independent in state and amplitude. Fade on stop/pause is handled by the channel's volume control rather than global volume which means it now works from anywhere. Opens up the possibility of plugin sounds during music playback by merely adding an additional channel enum. If any PCM drivers were not properly modified, see one of the last comments in the task for a description of the simple change that is expected. Some params are tunable in firmware/export/pcm-mixer.h as well.
2011-06-29 06:37:04 +00:00
pcm_mixer.h
Use playback channel directly for peakmeters and plugins using peak calculation. Also, for now, don't allow mixer playback to overlap recording, even if full duplex works.
2011-07-02 11:55:38 +00:00
pcm_sampr.h
Should clear up rest of red. Add a required #define in the config for c200. Fix up some preprocessing directives. Hope it's all taken care of now.
2010-06-26 10:37:41 +00:00
pl081.h
pl180.h
pnx0101.h
power.h
Rockbox as an application: Replace many occurences of #ifdef SIMULATOR with #if (CONFIG_PLATFORM & PLATFORM_HOSTED) (or equivalently).
2010-06-21 16:53:00 +00:00
powermgmt.h
Bring idle poweroff to RaaA and the sim
2011-03-08 19:33:30 +00:00
pp5002.h
Move CACHEALIGN_BITS to cpu headers
2010-04-13 15:50:08 +00:00
pp5020.h
Bootloader USB mode for PP502x. Enable only on GoGear SA9200 for the time being. Add HAVE_BOOTLOADER_USB_MODE to config if BOOTLOADER is defined to enable it. Clean up some kernel stuff a little to support it. Mess up a bunch of other stuff (hopefully not too badly).
2011-01-15 08:19:30 +00:00
pp5024.h
pp6100.h
profile.h
qt1106.h
r61509.h
ramdisk.h
Ramdisk: add hotswap support
2010-10-26 12:27:33 +00:00
rbpaths.h
Android: install codecs as native libs instead of extracting them (FS#12134).
2011-05-31 21:26:18 +00:00
rda5802.h
Signal strength meter for FM radio - FS#8151 by Przemysław Hołubowski
2010-11-11 21:13:29 +00:00
rk27xx.h
rk27xx - implement cache_commit_discard(). Cache is still not enabled in crt0.S
2011-07-19 06:49:03 +00:00
rolo.h
rtc.h
rtc_enable_alarm() needs no return value
2010-05-22 00:28:26 +00:00
s1a0903x01.h
s3c2440.h
s5l870x : use mmu-arm.S
2010-04-13 15:59:49 +00:00
s5l8700.h
usb-s3c6400x.[ch], button-clickwheel.c: Move s5l8701-specific parts to where they belong, prepare for s5l8702
2010-12-12 00:52:02 +00:00
s5l8702.h
iPod Classic: Fix YUV blitting. Mpegplayer works now.
2011-02-28 11:54:28 +00:00
screendump.h
Really fix yellow: Rename BMP_LINESIZE and BMP_BPP to get rid of the macro name collision
2010-10-25 12:52:02 +00:00
scroll_engine.h
Pixel-accurate (vertical) list scrolling for touchscreen targets.
2010-10-06 12:46:42 +00:00
sd.h
Bootloader USB mode for PP502x. Enable only on GoGear SA9200 for the time being. Add HAVE_BOOTLOADER_USB_MODE to config if BOOTLOADER is defined to enable it. Clean up some kernel stuff a little to support it. Mess up a bunch of other stuff (hopefully not too badly).
2011-01-15 08:19:30 +00:00
sdmmc.h
Remove card_enable_monitoring() and use a mutex instead. The card_enable_monitoring() method actually didn't eliminate the possible race conditions it was meant to fix.
2010-06-06 13:20:47 +00:00
serial.h
sh7034.h
si4700.h
fix reds, not so nice fiddling with simulator stubs to make it all works
2010-11-18 11:57:51 +00:00
sound.h
Gigabeat S: Fully enable access to hardware tone controls and 3-D effect feature. Under the hood, it's designated a hardware equalizer since it is one. Implement code framework for hardware EQ in general. Menu aspect is well abstracted and so the UI and strings can be changed around if taste doesn't quite suit. So far the emphasis is distinction of the UI labelling from the software EQ so that it's clear the settings are for a different thing.
2010-05-15 13:09:45 +00:00
spdif.h
spi.h
storage.h
Bootloader USB mode for PP502x. Enable only on GoGear SA9200 for the time being. Add HAVE_BOOTLOADER_USB_MODE to config if BOOTLOADER is defined to enable it. Clean up some kernel stuff a little to support it. Mess up a bunch of other stuff (hopefully not too badly).
2011-01-15 08:19:30 +00:00
structec.h
sw_i2c.h
synaptics-mep.h
SA9200: Adjust touchpad sensitivities so that actual contact with the player is needed to cause button presses and hopefully those settings will work nicely. Add a parameter read function to the MEP driver for debugging and RE purposes; enable compilation of it if you want to use it. Make a note in power-sa9200.c about button inits.
2011-01-11 23:48:29 +00:00
synaptics-rmi.h
imx233/fuze+: replace software i2c by hardware i2c, make some code more correct, reduce code size of lcd init sequences
2011-07-03 15:18:41 +00:00
system.h
Slightly more typesafe ALIGN_DOWN/UP macros.
2011-06-14 14:21:43 +00:00
tcc77x.h
Define CACHEALIGN_BITS for missing ARM CPUs for later use.
2010-11-19 07:17:20 +00:00
tcc780x.h
Define CACHEALIGN_BITS for missing ARM CPUs for later use.
2010-11-19 07:17:20 +00:00
tea5760.h
Signal strength meter for FM radio - FS#8151 by Przemysław Hołubowski
2010-11-11 21:13:29 +00:00
tea5767.h
Signal strength meter for FM radio - FS#8151 by Przemysław Hołubowski
2010-11-11 21:13:29 +00:00
thread.h
Change the thread api a bit.
2011-03-05 17:48:06 +00:00
timer.h
Rockbox as an application: Replace many occurences of #ifdef SIMULATOR with #if (CONFIG_PLATFORM & PLATFORM_HOSTED) (or equivalently).
2010-06-21 16:53:00 +00:00
tlv320.h
touchscreen.h
Touchscreen: Improved scroll threshold
2010-11-10 15:25:15 +00:00
tsc200x.h
tsc2100.h
M:Robe 500 and TSC2100: Add more to the initialization. Some GPIO initializations are now removed - this will be hanled by the OF or bootloader (when loading from flash).
2011-02-06 19:33:40 +00:00
tuner.h
fix reds, not so nice fiddling with simulator stubs to make it all works
2010-11-18 11:57:51 +00:00
uda1341.h
Improvements to mini2440/UDA1341 audio
2009-11-01 22:58:08 +00:00
uda1380.h
Fix more tabs
2010-01-03 10:27:43 +00:00
udacodec.h
usb-s3c6400x.h
usb-s3c6400x.[ch], button-clickwheel.c: Move s5l8701-specific parts to where they belong, prepare for s5l8702
2010-12-12 00:52:02 +00:00
usb-tcc.h
Fix more tabs
2010-01-03 10:27:43 +00:00
usb.h
The gigabeat S needs special casing so that you can still hold vol down to access its firmware partition. Additionally, the same logic should apply to firewire on the iPods.
2011-05-16 21:10:31 +00:00
usb_ch9.h
Fix more tabs
2010-01-03 10:27:43 +00:00
usb_core.h
New USB charging system, part 1 - API rework and user-visible setting update
2010-06-05 10:05:27 +00:00
usb_drv.h
usb_drv_reset() is only used in usb-drv-arc.c
2010-09-16 05:46:24 +00:00
wm8731.h
wm8751.h
slightly modified FS#11531 by me: WM8750/51 driver rework
2011-03-14 09:58:19 +00:00
wm8758.h
Submit first part of FS#12154. Whitespace removal and correction of several defines in WM8758 driver according to data sheet, no functional change. Thanks to Seheon Ryu.
2011-06-20 18:37:51 +00:00
wm8975.h
Fix FS#11973. iPod nano1G needed reboot after entering record mode to have audio again.
2011-03-03 20:53:30 +00:00
wm8978.h
Gigabeat S: Fully enable access to hardware tone controls and 3-D effect feature. Under the hood, it's designated a hardware equalizer since it is one. Implement code framework for hardware EQ in general. Menu aspect is well abstracted and so the UI and strings can be changed around if taste doesn't quite suit. So far the emphasis is distinction of the UI labelling from the software EQ so that it's clear the settings are for a different thing.
2010-05-15 13:09:45 +00:00
wm8985.h
Submit FS#11240 by Raphael Jakse. Allows to reduce volume on WM8985 to -89 dB (e.g. used for Cowon D2). Below -57 dB the line out is affected. The manual is updated accordingly.
2010-05-30 18:29:04 +00:00
wmcodec.h
936494f9c5