rockbox/firmware/export
Rafaël Carré a89c705ecb AMSv2: remove stray ; from USB_DEVBSS_ATTR
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31064 a1c6a512-1295-4272-9138-f99709370657
2011-11-27 00:07:06 +00:00
..
config fix target id for HiFiMAN HM-801 2011-11-16 16:07:06 +00:00
adc.h FS#10756 - Free unused init code 2010-03-03 23:20:32 +00:00
aic3x.h Sandisk Sansa Connect port (FS #12363) 2011-11-16 14:08:01 +00:00
ak4537.h 3 new ports: Samsung YH-820, YH-920, and YH-925. Mostly functional. Audio working on 820 & 925 (untested on the 920). No battery readings. No recording. No plugins. Keymap needs work. 2009-05-25 21:10:45 +00:00
akcodec.h 3 new ports: Samsung YH-820, YH-920, and YH-925. Mostly functional. Audio working on 820 & 925 (untested on the 920). No battery readings. No recording. No plugins. Keymap needs work. 2009-05-25 21:10:45 +00:00
as3514.h Sansa AMS/AMSv2: analog front-end register CVDD/DCDC3 doesn't exist in AMSv2, so don't modify it 2011-09-21 21:48:19 +00:00
as3525.h Fuze V2: Fix hold switch behavior. Add a GPIOx_PIN_MASK macro to AS3525. 2011-01-20 14:26:58 +00:00
as3525v2.h AMSv2: remove stray ; from USB_DEVBSS_ATTR 2011-11-27 00:07:06 +00:00
ascodec.h
at91sam9260.h Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h 2009-06-29 14:30:12 +00:00
ata-defines.h Bulk convert all DOS line endings to UNIX. 2011-11-06 22:44:25 +00:00
ata.h Add INIT_ATTR to storage_init() when possible 2011-11-20 18:44:40 +00:00
ata_idle_notify.h Rockbox as an application: Replace many occurences of #ifdef SIMULATOR with #if (CONFIG_PLATFORM & PLATFORM_HOSTED) (or equivalently). 2010-06-21 16:53:00 +00:00
ata_mmc.h Merge tCardInfo struct (MMC) and tSDCardInfo struct (SD) 2009-07-01 10:07:22 +00:00
audio.h Buflib: Make shrinking and buflib_available() smarter. 2011-11-17 17:55:02 +00:00
audiohw.h Sandisk Sansa Connect port (FS #12363) 2011-11-16 14:08:01 +00:00
backlight-sw-fading.h Get rid of the last "backlight thread fading" remnant, and of the calculation of the delay. It actually wasn't more than those 3 cases before anyway. 2009-03-11 21:10:17 +00:00
backlight.h FS#10756 - Free unused init code 2010-03-03 23:20:32 +00:00
bidi.h
bitswap.h
bootchart.h bootchart.h doesn't need _ansi.h, especially not in a relative path 2010-07-25 15:28:24 +00:00
button.h Add support multimedia keys/buttons to the core, and adapt Rockbox on android for it (multimedia buttons are found on wired headsets and the lock screen in cyanogenmod). 2010-10-31 15:32:57 +00:00
config.h Add INIT_ATTR to storage_init() when possible 2011-11-20 18:44:40 +00:00
config_caps.h
cpu.h Rockchip rk27xx port initial commit. This is still work in progress. 2011-05-30 21:10:37 +00:00
cs42l55.h Fix CS42L55 (iPod Classic) tone control 2011-01-07 23:09:09 +00:00
cscodec.h New port: iPod Classic (also known as iPod 6G/6.5G/7G) 2011-01-02 23:16:27 +00:00
dac3550a.h Bulk convert all DOS line endings to UNIX. 2011-11-06 22:44:25 +00:00
debug.h RaaA: Add initial Pandora support 2011-02-27 23:42:37 +00:00
disk.h Accept FS#11774 by Michael Hohmuth (with some own modifications to #ifdef conditions) 2010-11-28 15:22:51 +00:00
dm320.h Sandisk Sansa Connect port (FS #12363) 2011-11-16 14:08:01 +00:00
ds2411.h
dummy_codec.h Added HiFiMAN HM-801 target. FS#12355. This also renames tda1543.{ch} used by HM-60x to dummy_codec.{ch} as it works for PCM1704 used by HM-801. 2011-11-03 11:53:02 +00:00
eeprom_24cxx.h
eeprom_settings.h
enc_base.h
events.h FS#11263 - Radio Art support! %C and %Cl tags work in the radio screen and Base Skin when the radio is running. 2010-05-16 11:13:42 +00:00
fat.h iPod Classic CE-ATA Support (Part 2 of 4: Remove on-stack sector buffers, and replace them with a single statically allocated sector buffer that's arbitrated amongst users) 2011-02-27 22:44:54 +00:00
filefuncs.h struct DIR -> DIR, should fix most if not all reds. 2010-09-01 21:45:58 +00:00
fmradio.h
fmradio_i2c.h mark some functions as init functions (discarded after init() has run) 2010-05-27 12:00:29 +00:00
font.h FS#12293 Global default glyph setting in System > Limits > Glyphs To Cache. Defaults to 250. This saves a lot of RAM while still allowing non-English users to have adequate glyph coverage. 2011-11-19 23:34:26 +00:00
gdb_api.h
general.h Simplify mpegplayer a bit and use array-based lists rather than linked lists for stream management. Move a couple useful functions to handle pointer arrays from kernel.c into general.c; mpeglayer now makes use of them. 2010-05-17 12:34:05 +00:00
generic_i2c.h Apply FS #11423 - Use udelay in AMS driver for FM radio I2C 2010-06-21 21:41:07 +00:00
hangul.h
hd66789r.h
hwcompat.h Rockbox as an application: Replace many occurences of #ifdef SIMULATOR with #if (CONFIG_PLATFORM & PLATFORM_HOSTED) (or equivalently). 2010-06-21 16:53:00 +00:00
i2c-coldfire.h Fix more tabs 2010-01-03 10:27:43 +00:00
i2c-pp.h Move private #defines from i2c-pp.h to i2c-pp.c 2009-05-21 14:31:47 +00:00
i2c-rk27xx.h Rockchip rk27xx port initial commit. This is still work in progress. 2011-05-30 21:10:37 +00:00
i2c-s5l8700.h S5L8700: implement i2c driver (used for communicating with the RTC and the codec in the meizus) 2009-06-27 20:11:11 +00:00
i2c-s5l8702.h New port: iPod Classic (also known as iPod 6G/6.5G/7G) 2011-01-02 23:16:27 +00:00
i2c.h imx233/fuze+: replace software i2c by hardware i2c, make some code more correct, reduce code size of lcd init sequences 2011-07-03 15:18:41 +00:00
i2s.h
iap.h IAP: use a state machine for handling iap packets, based on FS#12135 2011-09-25 12:19:33 +00:00
ifp_usb_serial.h
imx31l.h Clean up multiple definitions of RAM size. Remove -DMEM (make) and MEM (code), use the already defined MEMORYSIZE instead. 2011-02-02 17:43:32 +00:00
imx233-codec.h imx233/fuze+: fix codec prototype header 2011-10-18 22:03:29 +00:00
imx233.h imx233/fuze+: enable plugins 2011-10-02 20:33:14 +00:00
ipod_remote_tuner.h iap: pass length and data pointer to iap_handlepkt functions, this prepares for iap large packet support. 2011-05-02 21:55:13 +00:00
isp1362.h
isp1583.h Correct svn:keywords and svn:eol-style on a few more files. 2009-07-12 09:43:44 +00:00
jz4740-codec.h Fix yellow 2009-05-26 23:28:53 +00:00
jz4740.h Ingenic Jz4740: add basic frequency switching 2009-07-03 21:34:40 +00:00
jz_mxu.h
kernel.h Get rid of a committed #define from kernel.h that didn't make the final cut. Put voice_wait in voice_thread.h where it ought. 2011-04-27 04:00:48 +00:00
lcd-charcell.h
lcd-remote.h Add new lcd_bmp and lcd_bmp_part APIs. 2011-11-08 21:34:46 +00:00
lcd.h Fix build errors and warnings in the lcd drivers. 2011-11-08 22:04:43 +00:00
led.h
load_code.h Extend lc_open() to also being able to load overlay plugins. 2010-09-09 16:17:21 +00:00
logf.h Move some gcc extensions to new gcc_extensions.h header 2010-07-25 14:44:29 +00:00
ltv350qv.h
lv24020lp.h Signal strength meter for FM radio - FS#8151 by Przemysław Hołubowski 2010-11-11 21:13:29 +00:00
m5636.h
m66591.h Correct svn:keywords and svn:eol-style on a few more files. 2009-07-12 09:43:44 +00:00
mas35xx.h Separate mas35xx lowlevel stuff. Move SH specific bits to target tree. FS#11189 by me. 2010-10-31 21:09:34 +00:00
mascodec.h FS#12378 : Removal of Archos HWCODEC unused code and data. Several large hardware-specific functions are kept for reference or future use. 2011-11-22 19:59:31 +00:00
mc13783.h i.MX31/Gigabeat S: Actually enable DPTC which can set optimal voltage for 528MHz. Requires an SPI and PMIC interface rework because of the low-latency needs for the DPTC to work best with minimal panicing. SPI can work with multitasking and asynchronously from interrupt handlers or normal code. 2010-05-04 10:07:53 +00:00
mcf5249.h Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h 2009-06-29 14:30:12 +00:00
mcf5250.h
mips-archdefs.h
mips.h
mipsregs.h
mmc.h Add INIT_ATTR to storage_init() when possible 2011-11-20 18:44:40 +00:00
mp3_playback.h FS#12378 : Removal of Archos HWCODEC unused code and data. Several large hardware-specific functions are kept for reference or future use. 2011-11-22 19:59:31 +00:00
mv.h Commit FS#9545, storage cleanup and multi-driver support 2009-07-17 22:28:49 +00:00
nand.h Add INIT_ATTR to storage_init() when possible 2011-11-20 18:44:40 +00:00
nand_id.h Correct svn:keywords and svn:eol-style on a few more files. 2009-07-12 09:43:44 +00:00
ohci.h Add data structures 2009-07-12 15:29:22 +00:00
panic.h Move some gcc extensions to new gcc_extensions.h header 2010-07-25 14:44:29 +00:00
pcf5060x.h D2: Use a common function for reading ADC values from the PMU 2009-10-08 15:47:43 +00:00
pcf5063x.h Initial support for runtime detection of the PMU used in newer D2+ models (PCF50635). The backlight and battery monitoring should work, but the RTC and touchscreen are not yet implemented. 2009-10-10 17:35:02 +00:00
pcf50605.h
pcf50606.h D2: Use a common function for reading ADC values from the PMU 2009-10-08 15:47:43 +00:00
pcf50635.h Initial support for runtime detection of the PMU used in newer D2+ models (PCF50635). The backlight and battery monitoring should work, but the RTC and touchscreen are not yet implemented. 2009-10-10 17:35:02 +00:00
pcm-internal.h Shuffle some functions around so that interfacing with playback.c in particular isn't required. Though playback does finish the audio init, pcm doesn't care who does it. 2011-09-01 12:15:43 +00:00
pcm.h Shuffle some functions around so that interfacing with playback.c in particular isn't required. Though playback does finish the audio init, pcm doesn't care who does it. 2011-09-01 12:15:43 +00:00
pcm_mixer.h Use playback channel directly for peakmeters and plugins using peak calculation. Also, for now, don't allow mixer playback to overlap recording, even if full duplex works. 2011-07-02 11:55:38 +00:00
pcm_sampr.h Should clear up rest of red. Add a required #define in the config for c200. Fix up some preprocessing directives. Hope it's all taken care of now. 2010-06-26 10:37:41 +00:00
pl081.h
pl180.h AMS Sansa: Add voltage defines to pl180.h. No functional changes. 2009-10-19 05:34:17 +00:00
pnx0101.h Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h 2009-06-29 14:30:12 +00:00
power.h Rockbox as an application: Replace many occurences of #ifdef SIMULATOR with #if (CONFIG_PLATFORM & PLATFORM_HOSTED) (or equivalently). 2010-06-21 16:53:00 +00:00
powermgmt.h Bring idle poweroff to RaaA and the sim 2011-03-08 19:33:30 +00:00
pp5002.h Move CACHEALIGN_BITS to cpu headers 2010-04-13 15:50:08 +00:00
pp5020.h Bootloader USB mode for PP502x. Enable only on GoGear SA9200 for the time being. Add HAVE_BOOTLOADER_USB_MODE to config if BOOTLOADER is defined to enable it. Clean up some kernel stuff a little to support it. Mess up a bunch of other stuff (hopefully not too badly). 2011-01-15 08:19:30 +00:00
pp5024.h
pp6100.h Add information gleaned from disassembling the main firmware image. Detect lcd type in use. Still no actual output 2009-07-17 20:40:40 +00:00
profile.h
qt1106.h
r61509.h Onda VX7x7: fix error when compiling with USB_BOOT defined 2009-07-29 12:57:42 +00:00
ramdisk.h Add INIT_ATTR to storage_init() when possible 2011-11-20 18:44:40 +00:00
rbpaths.h Android: install codecs as native libs instead of extracting them (FS#12134). 2011-05-31 21:26:18 +00:00
rda5802.h Signal strength meter for FM radio - FS#8151 by Przemysław Hołubowski 2010-11-11 21:13:29 +00:00
rk27xx.h rk27xx - implement cache_commit_discard(). Cache is still not enabled in crt0.S 2011-07-19 06:49:03 +00:00
rk27xx_codec.h Implement driver for internal codec in rk27xx (shCODlp-100.01-HD IP core from Dolphin) 2011-09-06 12:37:57 +00:00
rolo.h
rtc.h rtc_enable_alarm() needs no return value 2010-05-22 00:28:26 +00:00
s1a0903x01.h
s3c2440.h s5l870x : use mmu-arm.S 2010-04-13 15:59:49 +00:00
s5l8700.h usb-s3c6400x.[ch], button-clickwheel.c: Move s5l8701-specific parts to where they belong, prepare for s5l8702 2010-12-12 00:52:02 +00:00
s5l8702.h Bulk convert all DOS line endings to UNIX. 2011-11-06 22:44:25 +00:00
screendump.h Really fix yellow: Rename BMP_LINESIZE and BMP_BPP to get rid of the macro name collision 2010-10-25 12:52:02 +00:00
scroll_engine.h Pixel-accurate (vertical) list scrolling for touchscreen targets. 2010-10-06 12:46:42 +00:00
sd.h Add INIT_ATTR to storage_init() when possible 2011-11-20 18:44:40 +00:00
sdmmc.h Remove card_enable_monitoring() and use a mutex instead. The card_enable_monitoring() method actually didn't eliminate the possible race conditions it was meant to fix. 2010-06-06 13:20:47 +00:00
serial.h
sh7034.h Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h 2009-06-29 14:30:12 +00:00
si4700.h fix reds, not so nice fiddling with simulator stubs to make it all works 2010-11-18 11:57:51 +00:00
sound.h Gigabeat S: Fully enable access to hardware tone controls and 3-D effect feature. Under the hood, it's designated a hardware equalizer since it is one. Implement code framework for hardware EQ in general. Menu aspect is well abstracted and so the UI and strings can be changed around if taste doesn't quite suit. So far the emphasis is distinction of the UI labelling from the software EQ so that it's clear the settings are for a different thing. 2010-05-15 13:09:45 +00:00
spdif.h
spi.h Correct svn:keywords and svn:eol-style on a few more files. 2009-07-12 09:43:44 +00:00
storage.h Add INIT_ATTR to storage_init() when possible 2011-11-20 18:44:40 +00:00
structec.h
sw_i2c.h
synaptics-mep.h SA9200: Adjust touchpad sensitivities so that actual contact with the player is needed to cause button presses and hopefully those settings will work nicely. Add a parameter read function to the MEP driver for debugging and RE purposes; enable compilation of it if you want to use it. Make a note in power-sa9200.c about button inits. 2011-01-11 23:48:29 +00:00
synaptics-rmi.h imx233/fuze+: replace software i2c by hardware i2c, make some code more correct, reduce code size of lcd init sequences 2011-07-03 15:18:41 +00:00
system.h Add two macros for char*-based pointer arithmetic and use it in font.c 2011-10-07 19:29:18 +00:00
tcc77x.h Define CACHEALIGN_BITS for missing ARM CPUs for later use. 2010-11-19 07:17:20 +00:00
tcc780x.h Define CACHEALIGN_BITS for missing ARM CPUs for later use. 2010-11-19 07:17:20 +00:00
tea5760.h Signal strength meter for FM radio - FS#8151 by Przemysław Hołubowski 2010-11-11 21:13:29 +00:00
tea5767.h Signal strength meter for FM radio - FS#8151 by Przemysław Hołubowski 2010-11-11 21:13:29 +00:00
thread.h Finally commit FS#5111 - piezo clicker for ipods! 2011-11-16 10:25:43 +00:00
timer.h Rockbox as an application: Replace many occurences of #ifdef SIMULATOR with #if (CONFIG_PLATFORM & PLATFORM_HOSTED) (or equivalently). 2010-06-21 16:53:00 +00:00
tlv320.h
touchscreen.h Touchscreen: Improved scroll threshold 2010-11-10 15:25:15 +00:00
tsc200x.h Touchscreen support for newer Cowon D2+ hardware revisions (using TSC200x touchscreen controller). 2009-10-15 20:13:29 +00:00
tsc2100.h M:Robe 500 and TSC2100: Add more to the initialization. Some GPIO initializations are now removed - this will be hanled by the OF or bootloader (when loading from flash). 2011-02-06 19:33:40 +00:00
tuner.h fix reds, not so nice fiddling with simulator stubs to make it all works 2010-11-18 11:57:51 +00:00
uda1341.h Improvements to mini2440/UDA1341 audio 2009-11-01 22:58:08 +00:00
uda1380.h Fix more tabs 2010-01-03 10:27:43 +00:00
udacodec.h Create an udacodec interface (similar to ascodec and wmcoded) and adapt/implement it for the iriver h1xx/h3xx and the meizus. 2009-06-28 17:43:04 +00:00
usb-s3c6400x.h usb-s3c6400x.[ch], button-clickwheel.c: Move s5l8701-specific parts to where they belong, prepare for s5l8702 2010-12-12 00:52:02 +00:00
usb-tcc.h Fix more tabs 2010-01-03 10:27:43 +00:00
usb.h Remove obsolete USB_DETECT_BY_DRV define throughout. 2011-09-14 16:42:43 +00:00
usb_ch9.h Fix more tabs 2010-01-03 10:27:43 +00:00
usb_core.h New USB charging system, part 1 - API rework and user-visible setting update 2010-06-05 10:05:27 +00:00
usb_drv.h usb_drv_reset() is only used in usb-drv-arc.c 2010-09-16 05:46:24 +00:00
wm8731.h
wm8751.h slightly modified FS#11531 by me: WM8750/51 driver rework 2011-03-14 09:58:19 +00:00
wm8758.h Submit first part of FS#12154. Whitespace removal and correction of several defines in WM8758 driver according to data sheet, no functional change. Thanks to Seheon Ryu. 2011-06-20 18:37:51 +00:00
wm8975.h Fix FS#11973. iPod nano1G needed reboot after entering record mode to have audio again. 2011-03-03 20:53:30 +00:00
wm8978.h Gigabeat S/i.MX31/wm8978: Clean up clocking information in the general wmcodec/pcm drivers and move it to the target's wmcodec/i2s files. 2011-10-17 15:37:14 +00:00
wm8985.h Submit FS#11240 by Raphael Jakse. Allows to reduce volume on WM8985 to -89 dB (e.g. used for Cowon D2). Below -57 dB the line out is affected. The manual is updated accordingly. 2010-05-30 18:29:04 +00:00
wmcodec.h