| .. |
|
adc.h
|
Various coldfire fixes: (1) iAudio Bootloader: Check the status of main & remote power button vs. the respective hold switch, and shut down when on hold. On X5/M5 this check is not strictly necessary for the main unit, but left there to keep things uniform. (2) M3: Stop reading the ADC properly before leaving the bootloader, on RoLo, and on reboot, to make it work reliably after those transitions. (3) Disable all interrupt sources on system init to avoid premature ISR calls after enabling interrupts in general. (4) iAudios: Proper implementation of ide_powered(), avoiding nasty HDD clicks in the bootloader when powering down, e.g. because of Hold. (5) Slight optimisations.
|
2008-03-17 23:47:38 +00:00 |
|
as3514.h
|
FS#8898 - Prefix AS3514 registers with AS3514_
|
2008-04-15 21:33:32 +00:00 |
|
ata.h
|
remove the 2nd last evil use of ata_disk_is_active() in apps/
|
2008-04-30 09:23:12 +00:00 |
|
ata_idle_notify.h
|
Implement the playback event handling as a system-wide multi-purpose event system. Unified mpeg.c and playback.c audio event handling. Converted ata_idle_notify to use the new event handling system also.
|
2008-03-16 13:55:16 +00:00 |
|
ata_mmc.h
|
|
|
|
audio.h
|
Revert my earlier const madness, we'll keep the parameter lists simple.
|
2008-03-28 12:51:33 +00:00 |
|
audiohw.h
|
* introduce AUDIOHW_CAPS to define which audio codec can do what kind of operations in hw, e.g. setting bass
|
2008-04-28 08:37:18 +00:00 |
|
backlight.h
|
Greyscale library: * Implement linearisation curve flipping for 1st/2nd Gen iPods (LCD is inverted when backlight is on, so the curve is also inverted). This needs a slight extension of is_backlight_on() functionality in the core. * Thorough recalibration of all reachable greyscale targets, and #ifdef cleanup. * Reduce on-target gamma a bit, because the displayable contrast range of a monochrome/greyscale isn't that high.
|
2008-04-02 22:16:14 +00:00 |
|
bidi.h
|
Made source files #include the header file that they implement to make sure they are in sync. Made some local functions static.
|
2008-05-03 08:35:14 +00:00 |
|
bitswap.h
|
|
|
|
buffer.h
|
|
|
|
button.h
|
Setup the touchpads to have two modes - stylus and button - and set them in button mode by default.
|
2008-04-15 10:35:11 +00:00 |
|
config-c200.h
|
|
|
|
config-cowond2.h
|
Enable 'touchscreen areas' on the D2, based on JdGordon's m:robe code. Disable the bootloader debug screen, as that stuff is all available from the Debug menu now.
|
2008-04-27 13:30:11 +00:00 |
|
config-creativezvm.h
|
Fix more red...
|
2008-05-03 14:15:41 +00:00 |
|
config-e200.h
|
Oops. Didn't mean to commit this.
|
2008-03-04 14:40:04 +00:00 |
|
config-fmrecorder.h
|
use HAVE_ATA to decide if ata.c should be compiled
|
2008-03-27 10:58:36 +00:00 |
|
config-gigabeat-s.h
|
Gigabeat S: Implement i2c driver - transmit works but no testing of receiving which will get a chance later. Add some seeds for codec driver. Correct a few #defines.
|
2008-04-27 10:30:54 +00:00 |
|
config-gigabeat.h
|
use HAVE_ATA to decide if ata.c should be compiled
|
2008-03-27 10:58:36 +00:00 |
|
config-h10.h
|
use HAVE_ATA to decide if ata.c should be compiled
|
2008-03-27 10:58:36 +00:00 |
|
config-h10_5gb.h
|
use HAVE_ATA to decide if ata.c should be compiled
|
2008-03-27 10:58:36 +00:00 |
|
config-h100.h
|
use HAVE_ATA to decide if ata.c should be compiled
|
2008-03-27 10:58:36 +00:00 |
|
config-h120.h
|
use HAVE_ATA to decide if ata.c should be compiled
|
2008-03-27 10:58:36 +00:00 |
|
config-h300.h
|
use HAVE_ATA to decide if ata.c should be compiled
|
2008-03-27 10:58:36 +00:00 |
|
config-iaudiom3.h
|
use HAVE_ATA to decide if ata.c should be compiled
|
2008-03-27 10:58:36 +00:00 |
|
config-iaudiom5.h
|
use HAVE_ATA to decide if ata.c should be compiled
|
2008-03-27 10:58:36 +00:00 |
|
config-iaudiox5.h
|
use HAVE_ATA to decide if ata.c should be compiled
|
2008-03-27 10:58:36 +00:00 |
|
config-ifp7xx.h
|
|
|
|
config-ipod1g2g.h
|
use HAVE_ATA to decide if ata.c should be compiled
|
2008-03-27 10:58:36 +00:00 |
|
config-ipod3g.h
|
Adding new setting to System Settings <Accessory Power Supply -- off by default). This setting can be used to enable/disable the power supply for accessories. With this commit implemented for iPods with PCF50605 power controller.
|
2008-04-20 18:28:25 +00:00 |
|
config-ipod4g.h
|
Adding new setting to System Settings <Accessory Power Supply -- off by default). This setting can be used to enable/disable the power supply for accessories. With this commit implemented for iPods with PCF50605 power controller.
|
2008-04-20 18:28:25 +00:00 |
|
config-ipodcolor.h
|
Adding new setting to System Settings <Accessory Power Supply -- off by default). This setting can be used to enable/disable the power supply for accessories. With this commit implemented for iPods with PCF50605 power controller.
|
2008-04-20 18:28:25 +00:00 |
|
config-ipodmini.h
|
Adding new setting to System Settings <Accessory Power Supply -- off by default). This setting can be used to enable/disable the power supply for accessories. With this commit implemented for iPods with PCF50605 power controller.
|
2008-04-20 18:28:25 +00:00 |
|
config-ipodmini2g.h
|
Adding new setting to System Settings <Accessory Power Supply -- off by default). This setting can be used to enable/disable the power supply for accessories. With this commit implemented for iPods with PCF50605 power controller.
|
2008-04-20 18:28:25 +00:00 |
|
config-ipodnano.h
|
Adding new setting to System Settings <Accessory Power Supply -- off by default). This setting can be used to enable/disable the power supply for accessories. With this commit implemented for iPods with PCF50605 power controller.
|
2008-04-20 18:28:25 +00:00 |
|
config-ipodvideo.h
|
Adding new setting to System Settings <Accessory Power Supply -- off by default). This setting can be used to enable/disable the power supply for accessories. With this commit implemented for iPods with PCF50605 power controller.
|
2008-04-20 18:28:25 +00:00 |
|
config-logikdax.h
|
Add the Sansa M200 (v1) as a target - it's extremely similar to the Logik DAX (the LCD driver worked unchanged). Plus various tcc77x work, including a working tick interrupt (enabled in the bootloader). Rockbox itself builds for the M200 (there are no keymaps yet for the DAX), but doesn't progress very far due to the lack of an ATA (NAND flash) driver.
|
2008-05-02 19:12:09 +00:00 |
|
config-m200.h
|
Add the Sansa M200 (v1) as a target - it's extremely similar to the Logik DAX (the LCD driver worked unchanged). Plus various tcc77x work, including a working tick interrupt (enabled in the bootloader). Rockbox itself builds for the M200 (there are no keymaps yet for the DAX), but doesn't progress very far due to the lack of an ATA (NAND flash) driver.
|
2008-05-02 19:12:09 +00:00 |
|
config-mrobe100.h
|
m:robe 100 - backlight PWM fading
|
2008-04-25 20:06:42 +00:00 |
|
config-mrobe500.h
|
yep.. I really cant spell
|
2008-04-29 01:09:39 +00:00 |
|
config-ondiofm.h
|
|
|
|
config-ondiosp.h
|
Move a few #defines to target specific config files
|
2007-11-18 13:33:27 +00:00 |
|
config-player.h
|
Revert... stupid svn doesn't complain when passing -m twice :(
|
2008-04-02 22:45:23 +00:00 |
|
config-recorder.h
|
use HAVE_ATA to decide if ata.c should be compiled
|
2008-03-27 10:58:36 +00:00 |
|
config-recorderv2.h
|
use HAVE_ATA to decide if ata.c should be compiled
|
2008-03-27 10:58:36 +00:00 |
|
config-tpj1022.h
|
use HAVE_ATA to decide if ata.c should be compiled
|
2008-03-27 10:58:36 +00:00 |
|
config.h
|
Add the Sansa M200 (v1) as a target - it's extremely similar to the Logik DAX (the LCD driver worked unchanged). Plus various tcc77x work, including a working tick interrupt (enabled in the bootloader). Rockbox itself builds for the M200 (there are no keymaps yet for the DAX), but doesn't progress very far due to the lack of an ATA (NAND flash) driver.
|
2008-05-02 19:12:09 +00:00 |
|
config_caps.h
|
|
|
|
cpu.h
|
|
|
|
debug.h
|
|
|
|
disk.h
|
|
|
|
dm320.h
|
Commit whole Creative Zen Vision:M target tree + all related firmware/
|
2008-04-24 20:08:28 +00:00 |
|
ds2411.h
|
|
|
|
eeprom_24cxx.h
|
|
|
|
eeprom_settings.h
|
|
|
|
enc_base.h
|
|
|
|
events.h
|
Updated panicf in remove_event. Also fixed some comments.
|
2008-04-27 19:34:41 +00:00 |
|
fat.h
|
Do some crackdown on kernel object reinitialization after they could be in use and use before initialization. For c200/e200: Be sure fat cache and ata locks are acquired in the proper order during hot swapping. Delay hotswap monitoring until after initial file mounting (address 2nd kobj concern + possible call of fat driver before init).
|
2008-03-12 10:03:52 +00:00 |
|
fmradio.h
|
|
|
|
fmradio_i2c.h
|
|
|
|
font.h
|
Make checkwps compile again. Still more work is needed though, as checkwps is compiled to emulate an iPod Color - this needs changing to allow the LCD (and remote LCD) dimensions/depth to be specified on the commandline - the new %V tags are validated against the LCD characteristics
|
2008-03-25 21:09:58 +00:00 |
|
gdb_api.h
|
|
|
|
general.h
|
|
|
|
generic_i2c.h
|
|
|
|
hangul.h
|
|
|
|
hotswap.h
|
Arrrgh. Fix red now. :\
|
2008-03-12 11:23:42 +00:00 |
|
hwcompat.h
|
|
|
|
i2c-coldfire.h
|
Correct the name of a flag. No functional change.
|
2008-03-18 22:48:26 +00:00 |
|
i2c-pp.h
|
|
|
|
i2c.h
|
Update source files to include the header file for the functions they implement, to make sure the header and the implementation is consistent (and fix it for a case where it wasn't).
|
2008-04-28 10:22:05 +00:00 |
|
i2s.h
|
|
|
|
id3.h
|
Move a function to gwps-common.c because it belongs there
|
2008-04-12 13:25:16 +00:00 |
|
ifp_usb_serial.h
|
move the ifp7xx usb serial driver files to more specific names, to make the "usb_serial" name available for more general usb class driver use
|
2008-03-02 18:16:24 +00:00 |
|
imx31l.h
|
Remove some cruft not being used that interferes with building rockboy on Gigabeat S.
|
2008-05-02 00:34:19 +00:00 |
|
isp1362.h
|
|
|
|
isp1583.h
|
Commit whole Creative Zen Vision:M target tree + all related firmware/
|
2008-04-24 20:08:28 +00:00 |
|
kernel.h
|
Change a #define constant that conflicts with a mingw definition. Change "WAIT_*" to "OBJ_WAIT_*".
|
2008-04-01 03:55:02 +00:00 |
|
lcd-charcell.h
|
|
|
|
lcd-remote.h
|
Major cleanup of checkwps - fix all warnings and add a script to build versions for all supported targets (plus some unsupported ones). You now need to run the version of checkwps that matches the device your WPS is for.
|
2008-03-26 23:35:34 +00:00 |
|
lcd.h
|
Consistent naming scheme the various blit functions. * Removed lcd_blit_mono() for colour targets. Plugin API became incompatible, so sort, clean up & bump. * Implemented lcd_blit_mono() for M3.
|
2008-03-24 00:35:53 +00:00 |
|
led.h
|
|
|
|
logf.h
|
|
|
|
lv24020lp.h
|
|
|
|
m5636.h
|
|
|
|
mas.h
|
|
|
|
mas35xx.h
|
* introduce AUDIOHW_CAPS to define which audio codec can do what kind of operations in hw, e.g. setting bass
|
2008-04-28 08:37:18 +00:00 |
|
mc13783.h
|
UMS for the Gigabeat S. Bootloader USB mode. Has a couple quirks 1) First plug has problems if cold. Replug if it doesn't connect or not at high speed 2) Linux doesn't like the odd bootable flag value used in the partitions so it won't mount but Windows works. Fix minor OTG driver bugs and clean up device memory handling. Generic name for ARC controller driver.
|
2008-04-18 16:42:50 +00:00 |
|
mcf5249.h
|
|
|
|
mcf5250.h
|
|
|
|
mp3_playback.h
|
|
|
|
mp3data.h
|
|
|
|
mpeg.h
|
Updated use of events.h header file.
|
2008-04-27 19:56:16 +00:00 |
|
panic.h
|
|
|
|
pcf5060x.h
|
Split out the PCF5060x register defines into a common header and create a generic pcf50606.c using standard i2c read/writes.
|
2008-04-04 20:24:08 +00:00 |
|
pcf50605.h
|
|
|
|
pcf50606.h
|
Split out the PCF5060x register defines into a common header and create a generic pcf50606.c using standard i2c read/writes.
|
2008-04-04 20:24:08 +00:00 |
|
pcm.h
|
|
|
|
pcm_record.h
|
|
|
|
pcm_sampr.h
|
|
|
|
pnx0101.h
|
|
|
|
power.h
|
|
|
|
powermgmt.h
|
Adding new setting to System Settings <Accessory Power Supply -- off by default). This setting can be used to enable/disable the power supply for accessories. With this commit implemented for iPods with PCF50605 power controller.
|
2008-04-20 18:28:25 +00:00 |
|
pp5002.h
|
Fix the PP5002 interrupt controller register definitions. The PP5002 interrupt controller matches the first half of the PP502x interrupt controller (the actual interrupt bits are different though).
|
2008-04-03 21:48:41 +00:00 |
|
pp5020.h
|
move some data around to place qh_array at the start of iram. This saves up to about 2k iram on PP
|
2008-04-20 18:43:47 +00:00 |
|
pp5024.h
|
comment typo fixes
|
2008-02-22 20:23:00 +00:00 |
|
profile.h
|
Moved private types and constants from profile.h to profile.c
|
2008-04-28 18:41:13 +00:00 |
|
replaygain.h
|
|
|
|
rolo.h
|
Made rolo.h consistent with rolo.c
|
2008-05-03 07:17:44 +00:00 |
|
rtc.h
|
|
|
|
s1a0903x01.h
|
|
|
|
s3c2440.h
|
This is a big chunk of code necessary to prepare for Gigabeat F flash loading and and implementation of rolo. There should be no noticible changes for the user. A new bootloader is not needed.
|
2008-04-22 04:34:25 +00:00 |
|
scroll_engine.h
|
|
|
|
serial.h
|
|
|
|
sh7034.h
|
|
|
|
sound.h
|
|
|
|
spdif.h
|
|
|
|
spi.h
|
|
|
|
structec.h
|
|
|
|
sw_i2c.h
|
|
|
|
system.h
|
Add a complete priority inheritance implementation to the scheduler (all mutex ownership and queue_send calls are inheritable). Priorities are differential so that dispatch depends on the runnable range of priorities. Codec priority can therefore be raised in small steps (pcmbuf updated to enable). Simplify the kernel functions to ease implementation and use the same kernel.c for both sim and target (I'm tired of maintaining two ;_). 1) Not sure if a minor audio break at first buffering issue will exist on large-sector disks (the main mutex speed issue was genuinely resolved earlier). At this point it's best dealt with at the buffering level. It seems a larger filechunk could be used again. 2) Perhaps 64-bit sims will have some minor issues (finicky) but a backroll of the code of concern there is a 5-minute job. All kernel objects become incompatible so a full rebuild and update is needed.
|
2008-03-25 02:34:12 +00:00 |
|
tcc77x.h
|
Convert the TCC77x ADC driver to use interrupts - based on the technique used in the SH ADC driver.
|
2008-05-03 07:49:39 +00:00 |
|
tcc780x.h
|
A few preparations for the D2 PCM driver: move driver up to TCC780x level, move FIQ handler into PCM driver, add some new register defines, and remove those goddamn warnings.
|
2008-04-21 20:16:18 +00:00 |
|
tea5767.h
|
|
|
|
thread.h
|
Add GPIO manager. Get the PMIC interrupt handling working (along with power button and HP detect). Add some reg field defined instead of using raw numbers. Add PMIC info to debug ports screen. Refine PMIC driver ops a little bit.
|
2008-04-12 16:56:45 +00:00 |
|
timer.h
|
Add the Sansa M200 (v1) as a target - it's extremely similar to the Logik DAX (the LCD driver worked unchanged). Plus various tcc77x work, including a working tick interrupt (enabled in the bootloader). Rockbox itself builds for the M200 (there are no keymaps yet for the DAX), but doesn't progress very far due to the lack of an ATA (NAND flash) driver.
|
2008-05-02 19:12:09 +00:00 |
|
tlv320.h
|
|
|
|
tsc2100.h
|
fix red
|
2008-04-27 14:07:57 +00:00 |
|
tuner.h
|
|
|
|
uda1380.h
|
* introduce AUDIOHW_CAPS to define which audio codec can do what kind of operations in hw, e.g. setting bass
|
2008-04-28 08:37:18 +00:00 |
|
usb.h
|
UMS for the Gigabeat S. Bootloader USB mode. Has a couple quirks 1) First plug has problems if cold. Replug if it doesn't connect or not at high speed 2) Linux doesn't like the odd bootable flag value used in the partitions so it won't mount but Windows works. Fix minor OTG driver bugs and clean up device memory handling. Generic name for ARC controller driver.
|
2008-04-18 16:42:50 +00:00 |
|
usb_ch9.h
|
Add keywords and fix more headers.
|
2008-04-18 17:24:19 +00:00 |
|
usb_core.h
|
- change the usb class driver framework to allow for device classes with more than one interface or more than one endpoint pair
|
2008-04-26 19:02:16 +00:00 |
|
usb_drv.h
|
Make the inital connect problem go away on Gigabeat S. Would be nice if a better way were found but it works for me. Update the bootloader to have it work.
|
2008-04-20 03:30:57 +00:00 |
|
wm8721.h
|
|
|
|
wm8731.h
|
|
|
|
wm8751.h
|
|
|
|
wm8758.h
|
* introduce AUDIOHW_CAPS to define which audio codec can do what kind of operations in hw, e.g. setting bass
|
2008-04-28 08:37:18 +00:00 |
|
wm8975.h
|
* introduce AUDIOHW_CAPS to define which audio codec can do what kind of operations in hw, e.g. setting bass
|
2008-04-28 08:37:18 +00:00 |
|
wm8978.h
|
Gigabeat S: Implement i2c driver - transmit works but no testing of receiving which will get a chance later. Add some seeds for codec driver. Correct a few #defines.
|
2008-04-27 10:30:54 +00:00 |
|
wm8985.h
|
* introduce AUDIOHW_CAPS to define which audio codec can do what kind of operations in hw, e.g. setting bass
|
2008-04-28 08:37:18 +00:00 |
|
wmcodec.h
|
|
|
ae0f5edd7c