rockbox/firmware/export/imx31l.h
Michael Sevakis 05423386d4 Remove some cruft not being used that interferes with building rockboy on Gigabeat S.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17302 a1c6a512-1295-4272-9138-f99709370657
2008-05-02 00:34:19 +00:00

1125 lines
59 KiB
C
Executable file

/***************************************************************************
* __________ __ ___.
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
* \/ \/ \/ \/ \/
* $Id$
*
* Copyright (C) 2006 by James Espinoza
*
* All files in this archive are subject to the GNU General Public License.
* See the file COPYING in the source tree root for full license agreement.
*
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
* KIND, either express or implied.
*
****************************************************************************/
#ifndef __IMX31L_H__
#define __IMX31L_H__
/* Most(if not all) of these defines are copied from Nand-Boot v4 provided w/ the Imx31 Linux Bsp*/
#define REG8_PTR_T volatile unsigned char *
#define REG16_PTR_T volatile unsigned short *
#define REG32_PTR_T volatile unsigned long *
/* Place in the section with the framebuffer */
#define TTB_BASE_ADDR (0x80100000 + 0x00100000 - TTB_SIZE)
#define TTB_SIZE (0x4000)
#define IRAM_SIZE (0x4000)
#define TTB_BASE ((unsigned int *)TTB_BASE_ADDR)
#define FRAME ((void*)0x80100000)
#define FRAME_SIZE (240*320*2)
#define DEVBSS_ATTR __attribute__((section(".devbss"),nocommon))
#define QHARRAY_ATTR __attribute__((section(".qharray"),nocommon))
/*
* AIPS 1
*/
#define IRAM_BASE_ADDR 0x1fffc000
#define L2CC_BASE_ADDR 0x30000000
#define AIPS1_BASE_ADDR 0x43F00000
#define AIPS1_CTRL_BASE_ADDR AIPS1_BASE_ADDR
#define MAX_BASE_ADDR 0x43F04000
#define EVTMON_BASE_ADDR 0x43F08000
#define CLKCTL_BASE_ADDR 0x43F0C000
#define ETB_SLOT4_BASE_ADDR 0x43F10000
#define ETB_SLOT5_BASE_ADDR 0x43F14000
#define ECT_CTIO_BASE_ADDR 0x43F18000
#define I2C1_BASE_ADDR 0x43F80000
#define I2C3_BASE_ADDR 0x43F84000
#define OTG_BASE_ADDR 0x43F88000
#define ATA_BASE_ADDR 0x43F8C000
#define UART1_BASE_ADDR 0x43F90000
#define UART2_BASE_ADDR 0x43F94000
#define I2C2_BASE_ADDR 0x43F98000
#define OWIRE_BASE_ADDR 0x43F9C000
#define SSI1_BASE_ADDR 0x43FA0000
#define CSPI1_BASE_ADDR 0x43FA4000
#define KPP_BASE_ADDR 0x43FA8000
#define IOMUXC_BASE_ADDR 0x43FAC000
#define UART4_BASE_ADDR 0x43FB0000
#define UART5_BASE_ADDR 0x43FB4000
#define ECT_IP1_BASE_ADDR 0x43FB8000
#define ECT_IP2_BASE_ADDR 0x43FBC000
/*
* SPBA
*/
#define SPBA_BASE_ADDR 0x50000000
#define MMC_SDHC1_BASE_ADDR 0x50004000
#define MMC_SDHC2_BASE_ADDR 0x50008000
#define UART3_BASE_ADDR 0x5000C000
#define CSPI2_BASE_ADDR 0x50010000
#define SSI2_BASE_ADDR 0x50014000
#define SIM_BASE_ADDR 0x50018000
#define IIM_BASE_ADDR 0x5001C000
#define ATA_DMA_BASE_ADDR 0x50020000
#define SPBA_CTRL_BASE_ADDR 0x5003C000
/*
* AIPS 2
*/
#define AIPS2_BASE_ADDR 0x53F00000
#define AIPS2_CTRL_BASE_ADDR AIPS2_BASE_ADDR
#define CCM_BASE_ADDR 0x53F80000
#define CSPI3_BASE_ADDR 0x53F84000
#define FIRI_BASE_ADDR 0x53F8C000
#define GPT1_BASE_ADDR 0x53F90000
#define EPIT1_BASE_ADDR 0x53F94000
#define EPIT2_BASE_ADDR 0x53F98000
#define GPIO3_BASE_ADDR 0x53FA4000
#define SCC_BASE 0x53FAC000
#define SCM_BASE 0x53FAE000
#define SMN_BASE 0x53FAF000
#define RNGA_BASE_ADDR 0x53FB0000
#define IPU_CTRL_BASE_ADDR 0x53FC0000
#define AUDMUX_BASE 0x53FC4000
#define MPEG4_ENC_BASE 0x53FC8000
#define GPIO1_BASE_ADDR 0x53FCC000
#define GPIO2_BASE_ADDR 0x53FD0000
#define SDMA_BASE_ADDR 0x53FD4000
#define RTC_BASE_ADDR 0x53FD8000
#define WDOG_BASE_ADDR 0x53FDC000
#define PWM_BASE_ADDR 0x53FE0000
#define RTIC_BASE_ADDR 0x53FEC000
#define WDOG1_BASE_ADDR WDOG_BASE_ADDR
#define CRM_MCU_BASE_ADDR CCM_BASE_ADDR
/* IOMUXC */
#define IOMUXC_(o) (*(REG32_PTR_T)(IOMUXC_BASE_ADDR+(o)))
/* GPR */
#define IOMUXC_GPR IOMUXC_(0x008)
/* SW_MUX_CTL */
#define SW_MUX_CTL_CSPI3_MISO_CSPI3_SCLK_CSPI3_SPI_RDY_TTM_PAD IOMUXC_(0x00C)
#define SW_MUX_CTL_ATA_RESET_B_CE_CONTROL_CLKSS_CSPI3_MOSI IOMUXC_(0x010)
#define SW_MUX_CTL_ATA_CS1_ATA_DIOR_ATA_DIOW_ATA_DMACK IOMUXC_(0x014)
#define SW_MUX_CTL_SD1_DATA1_SD1_DATA2_SD1_DATA3_ATA_CS0 IOMUXC_(0x018)
#define SW_MUX_CTL_D3_SPL_SD1_CMD_SD1_CLK_SD1_DATA0 IOMUXC_(0x01C)
#define SW_MUX_CTL_VSYNC3_CONTRAST_D3_REV_D3_CLS IOMUXC_(0x020)
#define SW_MUX_CTL_SER_RS_PAR_RS_WRITE_READ IOMUXC_(0x024)
#define SW_MUX_CTL_SD_D_IO_SD_D_CLK_LCS0_LCS1 IOMUXC_(0x028)
#define SW_MUX_CTL_HSYNC_FPSHIFT_DRDY0_SD_D_I IOMUXC_(0x02C)
#define SW_MUX_CTL_LD15_LD16_LD17_VSYNC0 IOMUXC_(0x030)
#define SW_MUX_CTL_LD11_LD12_LD13_LD14 IOMUXC_(0x034)
#define SW_MUX_CTL_LD7_LD8_LD9_LD10 IOMUXC_(0x038)
#define SW_MUX_CTL_LD3_LD4_LD5_LD6 IOMUXC_(0x03C)
#define SW_MUX_CTL_USBH2_DATA1_LD0_LD1_LD2 IOMUXC_(0x040)
#define SW_MUX_CTL_USBH2_DIR_USBH2_STP_USBH2_NXT_USBH2_DATA0 IOMUXC_(0x044)
#define SW_MUX_CTL_USBOTG_DATA5_USBOTG_DATA6_USBOTG_DATA7_USBH2_CLK IOMUXC_(0x048)
#define SW_MUX_CTL_USBOTG_DATA1_USBOTG_DATA2_USBOTG_DATA3_USBOTG_DATA4 IOMUXC_(0x04C)
#define SW_MUX_CTL_USBOTG_DIR_USBOTG_STP_USBOTG_NXT_USBOTG_DATA0 IOMUXC_(0x050)
#define SW_MUX_CTL_USB_PWR_USB_OC_USB_BYP_USBOTG_CLK IOMUXC_(0x054)
#define SW_MUX_CTL_TDO_TRSTB_DE_B_SJC_MOD IOMUXC_(0x058)
#define SW_MUX_CTL_RTCK_TCK_TMS_TDI IOMUXC_(0x05C)
#define SW_MUX_CTL_KEY_COL4_KEY_COL5_KEY_COL6_KEY_COL7 IOMUXC_(0x060)
#define SW_MUX_CTL_KEY_COL0_KEY_COL1_KEY_COL2_KEY_COL3 IOMUXC_(0x064)
#define SW_MUX_CTL_KEY_ROW4_KEY_ROW5_KEY_ROW6_KEY_ROW7 IOMUXC_(0x068)
#define SW_MUX_CTL_KEY_ROW0_KEY_ROW1_KEY_ROW2_KEY_ROW3 IOMUXC_(0x06C)
#define SW_MUX_CTL_TXD2_RTS2_CTS2_BATT_LINE IOMUXC_(0x070)
#define SW_MUX_CTL_RI_DTE1_DCD_DTE1_DTR_DCE2_RXD2 IOMUXC_(0x074)
#define SW_MUX_CTL_RI_DCE1_DCD_DCE1_DTR_DTE1_DSR_DTE1 IOMUXC_(0x078)
#define SW_MUX_CTL_RTS1_CTS1_DTR_DCE1_DSR_DCE1 IOMUXC_(0x07C)
#define SW_MUX_CTL_CSPI2_SCLK_CSPI2_SPI_RDY_RXD1_TXD1 IOMUXC_(0x080)
#define SW_MUX_CTL_CSPI2_MISO_CSPI2_SS0_CSPI2_SS1_CSPI2_SS2 IOMUXC_(0x084)
#define SW_MUX_CTL_CSPI1_SS2_CSPI1_SCLK_CSPI1_SPI_RDY_CSPI2_MOSI IOMUXC_(0x088)
#define SW_MUX_CTL_CSPI1_MOSI_CSPI1_MISO_CSPI1_SS0_CSPI1_SS1 IOMUXC_(0x08C)
#define SW_MUX_CTL_STXD6_SRXD6_SCK6_SFS6 IOMUXC_(0x090)
#define SW_MUX_CTL_STXD5_SRXD5_SCK5_SFS5 IOMUXC_(0x094)
#define SW_MUX_CTL_STXD4_SRXD4_SCK4_SFS4 IOMUXC_(0x098)
#define SW_MUX_CTL_STXD3_SRXD3_SCK3_SFS3 IOMUXC_(0x09C)
#define SW_MUX_CTL_CSI_HSYNC_CSI_PIXCLK_I2C_CLK_I2C_DAT IOMUXC_(0x0A0)
#define SW_MUX_CTL_CSI_D14_CSI_D15_CSI_MCLK_CSI_VSYNC IOMUXC_(0x0A4)
#define SW_MUX_CTL_CSI_D10_CSI_D11_CSI_D12_CSI_D13 IOMUXC_(0x0A8)
#define SW_MUX_CTL_CSI_D6_CSI_D7_CSI_D8_CSI_D9 IOMUXC_(0x0AC)
#define SW_MUX_CTL_M_REQUEST_M_GRANT_CSI_D4_CSI_D5 IOMUXC_(0x0B0)
#define SW_MUX_CTL_PC_RST_IOIS16_PC_RW_B_PC_POE IOMUXC_(0x0B4)
#define SW_MUX_CTL_PC_VS1_PC_VS2_PC_BVD1_PC_BVD2 IOMUXC_(0x0B8)
#define SW_MUX_CTL_PC_CD2_B_PC_WAIT_B_PC_READY_PC_PWRON IOMUXC_(0x0BC)
#define SW_MUX_CTL_D2_D1_D0_PC_CD1_B IOMUXC_(0x0C0)
#define SW_MUX_CTL_D6_D5_D4_D3 IOMUXC_(0x0C4)
#define SW_MUX_CTL_D10_D9_D8_D7 IOMUXC_(0x0C8)
#define SW_MUX_CTL_D14_D13_D12_D11 IOMUXC_(0x0CC)
#define SW_MUX_CTL_NFWP_B_NFCE_B_NFRB_D15 IOMUXC_(0x0D0)
#define SW_MUX_CTL_NFWE_B_NFRE_B_NFALE_NFCLE IOMUXC_(0x0D4)
#define SW_MUX_CTL_SDQS0_SDQS1_SDQS2_SDQS3 IOMUXC_(0x0D8)
#define SW_MUX_CTL_SDCKE0_SDCKE1_SDCLK_SDCLK_B IOMUXC_(0x0DC)
#define SW_MUX_CTL_RW_RAS_CAS_SDWE IOMUXC_(0x0E0)
#define SW_MUX_CTL_CS5_ECB_LBA_BCLK IOMUXC_(0x0E4)
#define SW_MUX_CTL_CS1_CS2_CS3_CS4 IOMUXC_(0x0E8)
#define SW_MUX_CTL_EB0_EB1_OE_CS0 IOMUXC_(0x0EC)
#define SW_MUX_CTL_DQM0_DQM1_DQM2_DQM3 IOMUXC_(0x0F0)
#define SW_MUX_CTL_SD28_SD29_SD30_SD31 IOMUXC_(0x0F4)
#define SW_MUX_CTL_SD24_SD25_SD26_SD27 IOMUXC_(0x0F8)
#define SW_MUX_CTL_SD20_SD21_SD22_SD23 IOMUXC_(0x0FC)
#define SW_MUX_CTL_SD16_SD17_SD18_SD19 IOMUXC_(0x100)
#define SW_MUX_CTL_SD12_SD13_SD14_SD15 IOMUXC_(0x104)
#define SW_MUX_CTL_SD8_SD9_SD10_SD11 IOMUXC_(0x108)
#define SW_MUX_CTL_SD4_SD5_SD6_SD7 IOMUXC_(0x10C)
#define SW_MUX_CTL_SD0_SD1_SD2_SD3 IOMUXC_(0x110)
#define SW_MUX_CTL_A24_A25_SDBA1_SDBA0 IOMUXC_(0x114)
#define SW_MUX_CTL_A20_A21_A22_A23 IOMUXC_(0x118)
#define SW_MUX_CTL_A16_A17_A18_A19 IOMUXC_(0x11C)
#define SW_MUX_CTL_A12_A13_A14_A15 IOMUXC_(0x120)
#define SW_MUX_CTL_A9_A10_MA10_A11 IOMUXC_(0x124)
#define SW_MUX_CTL_A5_A6_A7_A8 IOMUXC_(0x128)
#define SW_MUX_CTL_A1_A2_A3_A4 IOMUXC_(0x12C)
#define SW_MUX_CTL_DVFS1_VPG0_VPG1_A0 IOMUXC_(0x130)
#define SW_MUX_CTL_CKIL_POWER_FAIL_VSTBY_DVFS0 IOMUXC_(0x134)
#define SW_MUX_CTL_BOOT_MODE1_BOOT_MODE2_BOOT_MODE3_BOOT_MODE4 IOMUXC_(0x138)
#define SW_MUX_CTL_RESET_IN_B_POR_B_CLKO_BOOT_MODE0 IOMUXC_(0x13C)
#define SW_MUX_CTL_STX0_SRX0_SIMPD0_CKIH IOMUXC_(0x140)
#define SW_MUX_CTL_GPIO3_1_SCLK0_SRST0_SVEN0 IOMUXC_(0x144)
#define SW_MUX_CTL_GPIO1_4_GPIO1_5_GPIO1_6_GPIO3_0 IOMUXC_(0x148)
#define SW_MUX_CTL_GPIO1_0_GPIO1_1_GPIO1_2_GPIO1_3 IOMUXC_(0x14C)
#define SW_MUX_CTL_CAPTURE_COMPARE_WATCHDOG_RST_PWMO IOMUXC_(0x150)
#define SW_MUX_OUT_EN_GPIO_DR 0x0
#define SW_MUX_OUT_FUNCTIONAL 0x1
#define SW_MUX_OUT_ALTERNATE_1 0x2
#define SW_MUX_OUT_ALTERNATE_2 0x3
#define SW_MUX_OUT_ALTERNATE_3 0x4
#define SW_MUX_OUT_ALTERNATE_4 0x5
#define SW_MUX_OUT_ALTERNATE_5 0x6
#define SW_MUX_OUT_ALTERNATE_6 0x7
#define SW_MUX_IN_NO_INPUTS 0x0
#define SW_MUX_IN_GPIO_PSR_ISR 0x1
#define SW_MUX_IN_FUNCTIONAL 0x2
#define SW_MUX_IN_ALTERNATE_1 0x3
#define SW_MUX_IN_ALTERNATE_2 0x4
/* Shift above flags into one of the four fields in each register */
#define SW_MUX_CTL_FLD_0(x) ((x) << 0)
#define SW_MUX_CTL_FLD_1(x) ((x) << 8)
#define SW_MUX_CTL_FLD_2(x) ((x) << 16)
#define SW_MUX_CTL_FLD_3(x) ((x) << 24)
/* SW_PAD_CTL */
#define SW_PAD_CTL_TTM_PAD__X__X IOMUXC_(0x154)
#define SW_PAD_CTL_CSPI3_MISO_CSPI3_SCLK_CSPI3_SPI_RDY IOMUXC_(0x158)
#define SW_PAD_CTL_CE_CONTROL_CLKSS_CSPI3_MOSI IOMUXC_(0x15C)
#define SW_PAD_CTL_ATA_DIOW_ATA_DMACK_ATA_RESET_B IOMUXC_(0x160)
#define SW_PAD_CTL_ATA_CS0_ATA_CS1_ATA_DIOR IOMUXC_(0x164)
#define SW_PAD_CTL_SD1_DATA1_SD1_DATA2_SD1_DATA3 IOMUXC_(0x168)
#define SW_PAD_CTL_SD1_CMD_SD1_CLK_SD1_DATA0 IOMUXC_(0x16C)
#define SW_PAD_CTL_D3_REV_D3_CLS_D3_SPL IOMUXC_(0x170)
#define SW_PAD_CTL_READ_VSYNC3_CONTRAST IOMUXC_(0x174)
#define SW_PAD_CTL_SER_RS_PAR_RS_WRITE IOMUXC_(0x178)
#define SW_PAD_CTL_SD_D_CLK_LCS0_LCS1 IOMUXC_(0x17C)
#define SW_PAD_CTL_DRDY0_SD_D_I_SD_D_IO IOMUXC_(0x180)
#define SW_PAD_CTL_VSYNC0_HSYNC_FPSHIFT IOMUXC_(0x184)
#define SW_PAD_CTL_LD15_LD16_LD17 IOMUXC_(0x188)
#define SW_PAD_CTL_LD12_LD13_LD14 IOMUXC_(0x18C)
#define SW_PAD_CTL_LD9_LD10_LD11 IOMUXC_(0x190)
#define SW_PAD_CTL_LD6_LD7_LD8 IOMUXC_(0x194)
#define SW_PAD_CTL_LD3_LD4_LD5 IOMUXC_(0x198)
#define SW_PAD_CTL_LD0_LD1_LD2 IOMUXC_(0x19C)
#define SW_PAD_CTL_USBH2_NXT_USBH2_DATA0_USBH2_DATA1 IOMUXC_(0x1A0)
#define SW_PAD_CTL_USBH2_CLK_USBH2_DIR_USBH2_STP IOMUXC_(0x1A4)
#define SW_PAD_CTL_USBOTG_DATA5_USBOTG_DATA6_USBOTG_DATA7 IOMUXC_(0x1A8)
#define SW_PAD_CTL_USBOTG_DATA2_USBOTG_DATA3_USBOTG_DATA4 IOMUXC_(0x1AC)
#define SW_PAD_CTL_USBOTG_NXT_USBOTG_DATA0_USBOTG_DATA1 IOMUXC_(0x1B0)
#define SW_PAD_CTL_USBOTG_CLK_USBOTG_DIR_USBOTG_STP IOMUXC_(0x1B4)
#define SW_PAD_CTL_USB_PWR_USB_OC_USB_BYP IOMUXC_(0x1B8)
#define SW_PAD_CTL_TRSTB_DE_B_SJC_MOD IOMUXC_(0x1BC)
#define SW_PAD_CTL_TMS_TDI_TDO IOMUXC_(0x1C0)
#define SW_PAD_CTL_KEY_COL7_RTCK_TCK IOMUXC_(0x1C4)
#define SW_PAD_CTL_KEY_COL4_KEY_COL5_KEY_COL6 IOMUXC_(0x1C8)
#define SW_PAD_CTL_KEY_COL1_KEY_COL2_KEY_COL3 IOMUXC_(0x1CC)
#define SW_PAD_CTL_KEY_ROW6_KEY_ROW7_KEY_COL0 IOMUXC_(0x1D0)
#define SW_PAD_CTL_KEY_ROW3_KEY_ROW4_KEY_ROW5 IOMUXC_(0x1D4)
#define SW_PAD_CTL_KEY_ROW0_KEY_ROW1_KEY_ROW2 IOMUXC_(0x1D8)
#define SW_PAD_CTL_RTS2_CTS2_BATT_LINE IOMUXC_(0x1DC)
#define SW_PAD_CTL_DTR_DCE2_RXD2_TXD2 IOMUXC_(0x1E0)
#define SW_PAD_CTL_DSR_DTE1_RI_DTE1_DCD_DTE1 IOMUXC_(0x1E4)
#define SW_PAD_CTL_RI_DCE1_DCD_DCE1_DTR_DTE1 IOMUXC_(0x1E8)
#define SW_PAD_CTL_CTS1_DTR_DCE1_DSR_DCE1 IOMUXC_(0x1EC)
#define SW_PAD_CTL_RXD1_TXD1_RTS1 IOMUXC_(0x1F0)
#define SW_PAD_CTL_CSPI2_SS2_CSPI2_SCLK_CSPI2_SPI_RDY IOMUXC_(0x1F4)
#define SW_PAD_CTL_CSPI2_MISO_CSPI2_SS0_CSPI2_SS1 IOMUXC_(0x1F8)
#define SW_PAD_CTL_CSPI1_SCLK_CSPI1_SPI_RDY_CSPI2_MOSI IOMUXC_(0x1FC)
#define SW_PAD_CTL_CSPI1_SS0_CSPI1_SS1_CSPI1_SS IOMUXC_(0x200)
#define SW_PAD_CTL_SFS6_CSPI1_MOSI_CSPI1_MISO IOMUXC_(0x204)
#define SW_PAD_CTL_STXD6_SRXD6_SCK6 IOMUXC_(0x208)
#define SW_PAD_CTL_SRXD5_SCK5_SFS5 IOMUXC_(0x20C)
#define SW_PAD_CTL_SCK4_SFS4_STXD5 IOMUXC_(0x210)
#define SW_PAD_CTL_SFS3_STXD4_SRXD4 IOMUXC_(0x214)
#define SW_PAD_CTL_STXD3_SRXD3_SCK3 IOMUXC_(0x218)
#define SW_PAD_CTL_CSI_PIXCLK_I2C_CLK_I2C_DAT IOMUXC_(0x21C)
#define SW_PAD_CTL_CSI_MCLK_CSI_VSYNC_CSI_HSYNC IOMUXC_(0x220)
#define SW_PAD_CTL_CSI_D13_CSI_D14_CSI_D15 IOMUXC_(0x224)
#define SW_PAD_CTL_CSI_D10_CSI_D11_CSI_D12 IOMUXC_(0x228)
#define SW_PAD_CTL_CSI_D7_CSI_D8_CSI_D9 IOMUXC_(0x22C)
#define SW_PAD_CTL_CSI_D4_CSI_D5_CSI_D6 IOMUXC_(0x230)
#define SW_PAD_CTL_PC_POE_M_REQUEST_M_GRANT IOMUXC_(0x234)
#define SW_PAD_CTL_PC_RST_IOIS16_PC_RW_B IOMUXC_(0x238)
#define SW_PAD_CTL_PC_VS2_PC_BVD1_PC_BVD2 IOMUXC_(0x23C)
#define SW_PAD_CTL_PC_READY_PC_PWRON_PC_VS1 IOMUXC_(0x240)
#define SW_PAD_CTL_PC_CD1_B_PC_CD2_B_PC_WAIT_B IOMUXC_(0x244)
#define SW_PAD_CTL_D2_D1_D0 IOMUXC_(0x248)
#define SW_PAD_CTL_D5_D4_D3 IOMUXC_(0x24C)
#define SW_PAD_CTL_D8_D7_D6 IOMUXC_(0x250)
#define SW_PAD_CTL_D11_D10_D9 IOMUXC_(0x254)
#define SW_PAD_CTL_D14_D13_D12 IOMUXC_(0x258)
#define SW_PAD_CTL_NFCE_B_NFRB_D15 IOMUXC_(0x25C)
#define SW_PAD_CTL_NFALE_NFCLE_NFWP_B IOMUXC_(0x260)
#define SW_PAD_CTL_SDQS3_NFWE_B_NFRE_B IOMUXC_(0x264)
#define SW_PAD_CTL_SDQS0_SDQS1_SDQS2 IOMUXC_(0x268)
#define SW_PAD_CTL_SDCKE1_SDCLK_SDCLK_B IOMUXC_(0x26C)
#define SW_PAD_CTL_CAS_SDWE_SDCKE0 IOMUXC_(0x270)
#define SW_PAD_CTL_BCLK_RW_RAS IOMUXC_(0x274)
#define SW_PAD_CTL_CS5_ECB_LBA IOMUXC_(0x278)
#define SW_PAD_CTL_CS2_CS3_CS4 IOMUXC_(0x27C)
#define SW_PAD_CTL_OE_CS0_CS1 IOMUXC_(0x280)
#define SW_PAD_CTL_DQM3_EB0_EB1 IOMUXC_(0x284)
#define SW_PAD_CTL_DQM0_DQM1_DQM2 IOMUXC_(0x288)
#define SW_PAD_CTL_SD29_SD30_SD31 IOMUXC_(0x28C)
#define SW_PAD_CTL_SD26_SD27_SD28 IOMUXC_(0x290)
#define SW_PAD_CTL_SD23_SD24_SD25 IOMUXC_(0x294)
#define SW_PAD_CTL_SD20_SD21_SD22 IOMUXC_(0x298)
#define SW_PAD_CTL_SD17_SD18_SD19 IOMUXC_(0x29C)
#define SW_PAD_CTL_SD14_SD15_SD16 IOMUXC_(0x2A0)
#define SW_PAD_CTL_SD11_SD12_SD13 IOMUXC_(0x2A4)
#define SW_PAD_CTL_SD8_SD9_SD10 IOMUXC_(0x2A8)
#define SW_PAD_CTL_SD5_SD6_SD7 IOMUXC_(0x2AC)
#define SW_PAD_CTL_SD2_SD3_SD4 IOMUXC_(0x2B0)
#define SW_PAD_CTL_SDBA0_SD0_SD1 IOMUXC_(0x2B4)
#define SW_PAD_CTL_A24_A25_SDBA1 IOMUXC_(0x2B8)
#define SW_PAD_CTL_A21_A22_A23 IOMUXC_(0x2BC)
#define SW_PAD_CTL_A18_A19_A20 IOMUXC_(0x2C0)
#define SW_PAD_CTL_A15_A16_A17 IOMUXC_(0x2C4)
#define SW_PAD_CTL_A12_A13_A14 IOMUXC_(0x2C8)
#define SW_PAD_CTL_A10_MA10_A11 IOMUXC_(0x2CC)
#define SW_PAD_CTL_A7_A8_A9 IOMUXC_(0x2D0)
#define SW_PAD_CTL_A4_A5_A6 IOMUXC_(0x2D4)
#define SW_PAD_CTL_A1_A2_A3 IOMUXC_(0x2D8)
#define SW_PAD_CTL_VPG0_VPG1_A0 IOMUXC_(0x2DC)
#define SW_PAD_CTL_VSTBY_DVFS0_DVFS1 IOMUXC_(0x2E0)
#define SW_PAD_CTL_BOOT_MODE4_CKIL_POWER_FAIL IOMUXC_(0x2E4)
#define SW_PAD_CTL_BOOT_MODE1_BOOT_MODE2_BOOT_MODE3 IOMUXC_(0x2E8)
#define SW_PAD_CTL_POR_B_CLKO_BOOT_MODE0 IOMUXC_(0x2EC)
#define SW_PAD_CTL_SIMPD0_CKIH_RESET_IN_B IOMUXC_(0x2F0)
#define SW_PAD_CTL_SVEN0_STX0_SRX0 IOMUXC_(0x2F4)
#define SW_PAD_CTL_GPIO3_1_SCLK0_SRST0 IOMUXC_(0x2F8)
#define SW_PAD_CTL_GPIO1_5_GPIO1_6_GPIO3_0 IOMUXC_(0x2FC)
#define SW_PAD_CTL_GPIO1_2_GPIO1_3_GPIO1_4 IOMUXC_(0x300)
#define SW_PAD_CTL_PWMO_GPIO1_0_GPIO1_1 IOMUXC_(0x304)
#define SW_PAD_CTL_CAPTURE_COMPARE_WATCHDOG_RST IOMUXC_(0x308)
/* SW_PAD_CTL flags */
#define SW_PAD_CTL_LOOPBACK (1 << 9)
#define SW_PAD_CTL_DISABLE_PULL_UP_DOWN_AND_KEEPER (0 << 7)
#if 0 /* Same as 0 */
#define SW_PAD_CTL_DISABLE_PULL_UP_DOWN_AND_KEEPER (1 << 7)
#endif
#define SW_PAD_CTL_ENABLE_KEEPER (2 << 7)
#define SW_PAD_CTL_ENABLE_PULL_UP_OR_PULL_DOWN (3 << 7)
#define SW_PAD_CTL_100K_PULL_DOWN (0 << 5)
#define SW_PAD_CTL_100K_PULL_UP (1 << 5)
#if 0 /* Completeness */
#define SW_PAD_CTL_47K_PULL_UP (2 << 5) /* Not in IMX31/L */
#define SW_PAD_CTL_22K_PULL_UP (3 << 5) /* Not in IMX31/L */
#endif
#define SW_PAD_CTL_IPP_HYS_STD (0 << 4)
#define SW_PAD_CTL_IPP_HYS_SCHIMDT (1 << 4)
#define SW_PAD_CTL_IPP_ODE_CMOS (0 << 3)
#define SW_PAD_CTL_IPP_ODE_OPEN (1 << 3)
#define SW_PAD_CTL_IPP_DSE_STD (0 << 1)
#define SW_PAD_CTL_IPP_DSE_HIGH (1 << 1)
#define SW_PAD_CTL_IPP_DSE_MAX (2 << 1)
#if 0 /* Same as 2 */
#define SW_PAD_CTL_IPP_DSE_MAX (3 << 1)
#endif
#define SW_PAD_CTL_IPP_SRE_SLOW (0 << 0)
#define SW_PAD_CTL_IPP_SRE_FAST (1 << 0)
/* Shift above flags into one of the three fields in each register */
#define SW_PAD_CTL_FLD_0(x) ((x) << 0)
#define SW_PAD_CTL_FLD_1(x) ((x) << 10)
#define SW_PAD_CTL_FLD_2(x) ((x) << 20)
/* IPU */
#define IPU_CONF (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x00))
#define IPU_CHA_BUF0_RDY (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x04))
#define IPU_CHA_BUF1_RDY (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x08))
#define IPU_CHA_DB_MODE_SEL (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x0C))
#define IPU_CHA_CUR_BUF (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x10))
#define IPU_FS_PROC_FLOW (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x14))
#define IPU_FS_DISP_FLOW (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x18))
#define IPU_TASKS_STAT (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x1C))
#define IPU_IMA_ADDR (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x20))
#define IPU_IMA_DATA (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x24))
#define IPU_INT_CTRL_1 (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x28))
#define IPU_INT_CTRL_2 (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x2C))
#define IPU_INT_CTRL_3 (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x30))
#define IPU_INT_CTRL_4 (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x34))
#define IPU_INT_CTRL_5 (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x38))
#define IPU_INT_STAT_1 (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x3C))
#define IPU_INT_STAT_2 (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x40))
#define IPU_INT_STAT_3 (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x44))
#define IPU_INT_STAT_4 (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x48))
#define IPU_INT_STAT_5 (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x4C))
#define IPU_BRK_CTRL_1 (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x50))
#define IPU_BRK_CTRL_2 (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x54))
#define IPU_BRK_STAT (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x58))
#define IPU_DIAGB_CTRL (*(REG32_PTR_T)(IPU_CTRL_BASE_ADDR+0x60))
/* ATA */
#define ATA_TIME_OFF (*(REG8_PTR_T)(ATA_BASE_ADDR+0x00))
#define ATA_TIME_ON (*(REG8_PTR_T)(ATA_BASE_ADDR+0x01))
#define ATA_TIME_1 (*(REG8_PTR_T)(ATA_BASE_ADDR+0x02))
#define ATA_TIME_2W (*(REG8_PTR_T)(ATA_BASE_ADDR+0x03))
/* PIO */
#define ATA_TIME_2R (*(REG8_PTR_T)(ATA_BASE_ADDR+0x04))
#define ATA_TIME_AX (*(REG8_PTR_T)(ATA_BASE_ADDR+0x05))
#define ATA_TIME_4 (*(REG8_PTR_T)(ATA_BASE_ADDR+0x07))
#define ATA_TIME_9 (*(REG8_PTR_T)(ATA_BASE_ADDR+0x08))
/* MDMA */
#define ATA_TIME_M (*(REG8_PTR_T)(ATA_BASE_ADDR+0x09))
#define ATA_TIME_JN (*(REG8_PTR_T)(ATA_BASE_ADDR+0x0A))
#define ATA_TIME_D (*(REG8_PTR_T)(ATA_BASE_ADDR+0x0B))
#define ATA_TIME_K (*(REG8_PTR_T)(ATA_BASE_ADDR+0x0C))
/* UDMA */
#define ATA_TIME_ACK (*(REG8_PTR_T)(ATA_BASE_ADDR+0x0D))
#define ATA_TIME_ENV (*(REG8_PTR_T)(ATA_BASE_ADDR+0x0E))
#define ATA_TIME_PIO_RDX (*(REG8_PTR_T)(ATA_BASE_ADDR+0x0F))
#define ATA_TIME_ZAH (*(REG8_PTR_T)(ATA_BASE_ADDR+0x10))
#define ATA_TIME_MLIX (*(REG8_PTR_T)(ATA_BASE_ADDR+0x11))
#define ATA_TIME_DVH (*(REG8_PTR_T)(ATA_BASE_ADDR+0x12))
#define ATA_TIME_DZFS (*(REG8_PTR_T)(ATA_BASE_ADDR+0x13))
#define ATA_TIME_DVS (*(REG8_PTR_T)(ATA_BASE_ADDR+0x14))
#define ATA_TIME_CVS (*(REG8_PTR_T)(ATA_BASE_ADDR+0x15))
#define ATA_TIME_SS (*(REG8_PTR_T)(ATA_BASE_ADDR+0x16))
#define ATA_TIME_CYC (*(REG8_PTR_T)(ATA_BASE_ADDR+0x17))
/* */
#define ATA_FIFO_DATA_32 (*(REG32_PTR_T)(ATA_BASE_ADDR+0x18))
#define ATA_FIFO_DATA_16 (*(REG16_PTR_T)(ATA_BASE_ADDR+0x1c))
#define ATA_FIFO_FILL (*(REG8_PTR_T)(ATA_BASE_ADDR+0x20))
/* Actually ATA_CONTROL but conflicts arise */
#define ATA_INTF_CONTROL (*(REG8_PTR_T)(ATA_BASE_ADDR+0x24))
#define ATA_INTERRUPT_PENDING (*(REG8_PTR_T)(ATA_BASE_ADDR+0x28))
#define ATA_INTERRUPT_ENABLE (*(REG8_PTR_T)(ATA_BASE_ADDR+0x2c))
#define ATA_INTERRUPT_CLEAR (*(REG8_PTR_T)(ATA_BASE_ADDR+0x30))
#define ATA_FIFO_ALARM (*(REG8_PTR_T)(ATA_BASE_ADDR+0x34))
#define ATA_DRIVE_DATA (*(REG16_PTR_T)(ATA_BASE_ADDR+0xA0))
#define ATA_DRIVE_FEATURES (*(REG8_PTR_T)(ATA_BASE_ADDR+0xA4))
#define ATA_DRIVE_SECTOR_COUNT (*(REG8_PTR_T)(ATA_BASE_ADDR+0xA8))
#define ATA_DRIVE_SECTOR_NUM (*(REG8_PTR_T)(ATA_BASE_ADDR+0xAC))
#define ATA_DRIVE_CYL_LOW (*(REG8_PTR_T)(ATA_BASE_ADDR+0xB0))
#define ATA_DRIVE_CYL_HIGH (*(REG8_PTR_T)(ATA_BASE_ADDR+0xB4))
#define ATA_DRIVE_CYL_HEAD (*(REG8_PTR_T)(ATA_BASE_ADDR+0xB8))
#define ATA_DRIVE_STATUS (*(REG8_PTR_T)(ATA_BASE_ADDR+0xBC)) /* rd */
#define ATA_DRIVE_COMMAND (*(REG8_PTR_T)(ATA_BASE_ADDR+0xBC)) /* wr */
#define ATA_ALT_DRIVE_STATUS (*(REG8_PTR_T)(ATA_BASE_ADDR+0xD8)) /* rd */
#define ATA_DRIVE_CONTROL (*(REG8_PTR_T)(ATA_BASE_ADDR+0xD8)) /* wr */
/* ATA_INTF_CONTROL flags */
#define ATA_FIFO_RST (1 << 7)
#define ATA_ATA_RST (1 << 6)
#define ATA_FIFO_TX_EN (1 << 5)
#define ATA_FIFO_RCV_EN (1 << 4)
#define ATA_DMA_PENDING (1 << 3)
#define ATA_DMA_ULTRA_SELECTED (1 << 2)
#define ATA_DMA_WRITE (1 << 1)
#define ATA_IORDY_EN (1 << 0)
/* ATA_INTERRUPT_PENDING, ATA_INTERRUPT_ENABLE, ATA_INTERRUPT_CLEAR flags */
#define ATA_INTRQ1 (1 << 7)
#define ATA_FIFO_UNDERFLOW (1 << 6)
#define ATA_FIFO_OVERFLOW (1 << 5)
#define ATA_CONTROLLER_IDLE (1 << 4)
#define ATA_INTRQ2 (1 << 3)
/* EPIT */
#define EPITCR1 (*(REG32_PTR_T)(EPIT1_BASE_ADDR+0x00))
#define EPITSR1 (*(REG32_PTR_T)(EPIT1_BASE_ADDR+0x04))
#define EPITLR1 (*(REG32_PTR_T)(EPIT1_BASE_ADDR+0x08))
#define EPITCMPR1 (*(REG32_PTR_T)(EPIT1_BASE_ADDR+0x0C))
#define EPITCNT1 (*(REG32_PTR_T)(EPIT1_BASE_ADDR+0x10))
#define EPITCR2 (*(REG32_PTR_T)(EPIT2_BASE_ADDR+0x00))
#define EPITSR2 (*(REG32_PTR_T)(EPIT2_BASE_ADDR+0x04))
#define EPITLR2 (*(REG32_PTR_T)(EPIT2_BASE_ADDR+0x08))
#define EPITCMPR2 (*(REG32_PTR_T)(EPIT2_BASE_ADDR+0x0C))
#define EPITCNT2 (*(REG32_PTR_T)(EPIT2_BASE_ADDR+0x10))
#define EPITCR_CLKSRC_OFF (0 << 24)
#define EPITCR_CLKSRC_IPG_CLK (1 << 24)
#define EPITCR_CLKSRC_IPG_CLK_HIGHFREQ (2 << 24)
#define EPITCR_CLKSRC_IPG_CLK_32K (3 << 24)
#define EPITCR_OM_DISCONNECTED (0 << 22)
#define EPITCR_OM_TOGGLE (1 << 22)
#define EPITCR_OM_CLEAR (2 << 22)
#define EPITCR_OM_SET (3 << 22)
#define EPITCR_STOPEN (1 << 21)
#define EPITCR_DOZEN (1 << 20)
#define EPITCR_WAITEN (1 << 19)
#define EPITCR_DBGEN (1 << 18)
#define EPITCR_IOVW (1 << 17)
#define EPITCR_SWR (1 << 16)
#define EPITCR_PRESCALER(n) ((n) << 4) /* Divide by n+1 */
#define EPITCR_RLD (1 << 3)
#define EPITCR_OCIEN (1 << 2)
#define EPITCR_ENMOD (1 << 1)
#define EPITCR_EN (1 << 0)
#define EPITSR_OCIF (1 << 0)
/* GPIO */
#define GPIO1_DR (*(REG32_PTR_T)(GPIO1_BASE_ADDR+0x00))
#define GPIO1_GDIR (*(REG32_PTR_T)(GPIO1_BASE_ADDR+0x04))
#define GPIO1_PSR (*(REG32_PTR_T)(GPIO1_BASE_ADDR+0x08))
#define GPIO1_ICR1 (*(REG32_PTR_T)(GPIO1_BASE_ADDR+0x0C))
#define GPIO1_ICR2 (*(REG32_PTR_T)(GPIO1_BASE_ADDR+0x10))
#define GPIO1_IMR (*(REG32_PTR_T)(GPIO1_BASE_ADDR+0x14))
#define GPIO1_ISR (*(REG32_PTR_T)(GPIO1_BASE_ADDR+0x18))
#define GPIO2_DR (*(REG32_PTR_T)(GPIO2_BASE_ADDR+0x00))
#define GPIO2_GDIR (*(REG32_PTR_T)(GPIO2_BASE_ADDR+0x04))
#define GPIO2_PSR (*(REG32_PTR_T)(GPIO2_BASE_ADDR+0x08))
#define GPIO2_ICR1 (*(REG32_PTR_T)(GPIO2_BASE_ADDR+0x0C))
#define GPIO2_ICR2 (*(REG32_PTR_T)(GPIO2_BASE_ADDR+0x10))
#define GPIO2_IMR (*(REG32_PTR_T)(GPIO2_BASE_ADDR+0x14))
#define GPIO2_ISR (*(REG32_PTR_T)(GPIO2_BASE_ADDR+0x18))
#define GPIO3_DR (*(REG32_PTR_T)(GPIO3_BASE_ADDR+0x00))
#define GPIO3_GDIR (*(REG32_PTR_T)(GPIO3_BASE_ADDR+0x04))
#define GPIO3_PSR (*(REG32_PTR_T)(GPIO3_BASE_ADDR+0x08))
#define GPIO3_ICR1 (*(REG32_PTR_T)(GPIO3_BASE_ADDR+0x0C))
#define GPIO3_ICR2 (*(REG32_PTR_T)(GPIO3_BASE_ADDR+0x10))
#define GPIO3_IMR (*(REG32_PTR_T)(GPIO3_BASE_ADDR+0x14))
#define GPIO3_ISR (*(REG32_PTR_T)(GPIO3_BASE_ADDR+0x18))
/* CSPI */
#define CSPI_RXDATA1 (*(REG32_PTR_T)(CSPI1_BASE_ADDR+0x00))
#define CSPI_TXDATA1 (*(REG32_PTR_T)(CSPI1_BASE_ADDR+0x04))
#define CSPI_CONREG1 (*(REG32_PTR_T)(CSPI1_BASE_ADDR+0x08))
#define CSPI_INTREG1 (*(REG32_PTR_T)(CSPI1_BASE_ADDR+0x0C))
#define CSPI_DMAREG1 (*(REG32_PTR_T)(CSPI1_BASE_ADDR+0x10))
#define CSPI_STATREG1 (*(REG32_PTR_T)(CSPI1_BASE_ADDR+0x14))
#define CSPI_PERIODREG1 (*(REG32_PTR_T)(CSPI1_BASE_ADDR+0x18))
#define CSPI_TESTREG1 (*(REG32_PTR_T)(CSPI1_BASE_ADDR+0x1C0))
#define CSPI_RXDATA2 (*(REG32_PTR_T)(CSPI2_BASE_ADDR+0x00))
#define CSPI_TXDATA2 (*(REG32_PTR_T)(CSPI2_BASE_ADDR+0x04))
#define CSPI_CONREG2 (*(REG32_PTR_T)(CSPI2_BASE_ADDR+0x08))
#define CSPI_INTREG2 (*(REG32_PTR_T)(CSPI2_BASE_ADDR+0x0C))
#define CSPI_DMAREG2 (*(REG32_PTR_T)(CSPI2_BASE_ADDR+0x10))
#define CSPI_STATREG2 (*(REG32_PTR_T)(CSPI2_BASE_ADDR+0x14))
#define CSPI_PERIODREG2 (*(REG32_PTR_T)(CSPI2_BASE_ADDR+0x18))
#define CSPI_TESTREG2 (*(REG32_PTR_T)(CSPI2_BASE_ADDR+0x1C0))
#define CSPI_RXDATA3 (*(REG32_PTR_T)(CSPI3_BASE_ADDR+0x00))
#define CSPI_TXDATA3 (*(REG32_PTR_T)(CSPI3_BASE_ADDR+0x04))
#define CSPI_CONREG3 (*(REG32_PTR_T)(CSPI3_BASE_ADDR+0x08))
#define CSPI_INTREG3 (*(REG32_PTR_T)(CSPI3_BASE_ADDR+0x0C))
#define CSPI_DMAREG3 (*(REG32_PTR_T)(CSPI3_BASE_ADDR+0x10))
#define CSPI_STATREG3 (*(REG32_PTR_T)(CSPI3_BASE_ADDR+0x14))
#define CSPI_PERIODREG3 (*(REG32_PTR_T)(CSPI3_BASE_ADDR+0x18))
#define CSPI_TESTREG3 (*(REG32_PTR_T)(CSPI3_BASE_ADDR+0x1C0))
/* CSPI CONREG flags/fields */
#define CSPI_CONREG_CHIP_SELECT_SS0 (0 << 24)
#define CSPI_CONREG_CHIP_SELECT_SS1 (1 << 24)
#define CSPI_CONREG_CHIP_SELECT_SS2 (2 << 24)
#define CSPI_CONREG_CHIP_SELECT_SS3 (3 << 24)
#define CSPI_CONREG_CHIP_SELECT_MASK (3 << 24)
#define CSPI_CONREG_DRCTL_DONT_CARE (0 << 20)
#define CSPI_CONREG_DRCTL_TRIG_FALLING (1 << 20)
#define CSPI_CONREG_DRCTL_TRIG_LOW (2 << 20)
#define CSPI_CONREG_DRCTL_TRIG_RSV (3 << 20)
#define CSPI_CONREG_DRCTL_MASK (3 << 20)
#define CSPI_CONREG_DATA_RATE_DIV_4 (0 << 16)
#define CSPI_CONREG_DATA_RATE_DIV_8 (1 << 16)
#define CSPI_CONREG_DATA_RATE_DIV_16 (2 << 16)
#define CSPI_CONREG_DATA_RATE_DIV_32 (3 << 16)
#define CSPI_CONREG_DATA_RATE_DIV_64 (4 << 16)
#define CSPI_CONREG_DATA_RATE_DIV_128 (5 << 16)
#define CSPI_CONREG_DATA_RATE_DIV_256 (6 << 16)
#define CSPI_CONREG_DATA_RATE_DIV_512 (7 << 16)
#define CSPI_CONREG_DATA_RATE_DIV_MASK (7 << 16)
#define CSPI_BITCOUNT(n) ((n) << 8)
#define CSPI_CONREG_SSPOL (1 << 7)
#define CSPI_CONREG_SSCTL (1 << 6)
#define CSPI_CONREG_PHA (1 << 6)
#define CSPI_CONREG_POL (1 << 4)
#define CSPI_CONREG_SMC (1 << 3)
#define CSPI_CONREG_XCH (1 << 2)
#define CSPI_CONREG_MODE (1 << 1)
#define CSPI_CONREG_EN (1 << 0)
/* CSPI INTREG flags */
#define CSPI_INTREG_TCEN (1 << 8)
#define CSPI_INTREG_BOEN (1 << 7)
#define CSPI_INTREG_ROEN (1 << 6)
#define CSPI_INTREG_RFEN (1 << 5)
#define CSPI_INTREG_RHEN (1 << 4)
#define CSPI_INTREG_RREN (1 << 3)
#define CSPI_INTREG_TFEN (1 << 2)
#define CSPI_INTREG_THEN (1 << 1)
#define CSPI_INTREG_TEEN (1 << 0)
/* CSPI DMAREG flags */
#define CSPI_DMAREG_RFDEN (1 << 5)
#define CSPI_DMAREG_RHDEN (1 << 4)
#define CSPI_DMAREG_THDEN (1 << 1)
#define CSPI_DMAREG_TEDEN (1 << 0)
/* CSPI STATREG flags */
#define CSPI_STATREG_TC (1 << 8) /* w1c */
#define CSPI_STATREG_BO (1 << 7) /* w1c */
#define CSPI_STATREG_RO (1 << 6)
#define CSPI_STATREG_RF (1 << 5)
#define CSPI_STATREG_RH (1 << 4)
#define CSPI_STATREG_RR (1 << 3)
#define CSPI_STATREG_TF (1 << 2)
#define CSPI_STATREG_TH (1 << 1)
#define CSPI_STATREG_TE (1 << 0)
/* CSPI PERIODREG flags */
#define CSPI_PERIODREG_CSRC (1 << 15)
/* CSPI TESTREG flags */
#define CSPI_TESTREG_SWAP (1 << 15)
#define CSPI_TESTREG_LBC (1 << 14)
/* I2C */
#define I2C_IADR1 (*(REG16_PTR_T)(I2C1_BASE_ADDR+0x0))
#define I2C_IFDR1 (*(REG16_PTR_T)(I2C1_BASE_ADDR+0x4))
#define I2C_I2CR1 (*(REG16_PTR_T)(I2C1_BASE_ADDR+0x8))
#define I2C_I2SR1 (*(REG16_PTR_T)(I2C1_BASE_ADDR+0xC))
#define I2C_I2DR1 (*(REG16_PTR_T)(I2C1_BASE_ADDR+0x10))
#define I2C_IADR2 (*(REG16_PTR_T)(I2C2_BASE_ADDR+0x0))
#define I2C_IFDR2 (*(REG16_PTR_T)(I2C2_BASE_ADDR+0x4))
#define I2C_I2CR2 (*(REG16_PTR_T)(I2C2_BASE_ADDR+0x8))
#define I2C_I2SR2 (*(REG16_PTR_T)(I2C2_BASE_ADDR+0xC))
#define I2C_I2DR2 (*(REG16_PTR_T)(I2C2_BASE_ADDR+0x10))
#define I2C_IADR3 (*(REG16_PTR_T)(I2C3_BASE_ADDR+0x0))
#define I2C_IFDR3 (*(REG16_PTR_T)(I2C3_BASE_ADDR+0x4))
#define I2C_I2CR3 (*(REG16_PTR_T)(I2C3_BASE_ADDR+0x8))
#define I2C_I2SR3 (*(REG16_PTR_T)(I2C3_BASE_ADDR+0xC))
#define I2C_I2DR3 (*(REG16_PTR_T)(I2C3_BASE_ADDR+0x10))
/* IADR - [7:1] Address */
/* IFDR */
#define I2C_IFDR_DIV30 0x00
#define I2C_IFDR_DIV32 0x01
#define I2C_IFDR_DIV36 0x02
#define I2C_IFDR_DIV42 0x03
#define I2C_IFDR_DIV48 0x04
#define I2C_IFDR_DIV52 0x05
#define I2C_IFDR_DIV60 0x06
#define I2C_IFDR_DIV72 0x07
#define I2C_IFDR_DIV80 0x08
#define I2C_IFDR_DIV88 0x09
#define I2C_IFDR_DIV104 0x0a
#define I2C_IFDR_DIV128 0x0b
#define I2C_IFDR_DIV144 0x0c
#define I2C_IFDR_DIV160 0x0d
#define I2C_IFDR_DIV192 0x0e
#define I2C_IFDR_DIV240 0x0f
#define I2C_IFDR_DIV288 0x10
#define I2C_IFDR_DIV320 0x11
#define I2C_IFDR_DIV384 0x12
#define I2C_IFDR_DIV480 0x13
#define I2C_IFDR_DIV576 0x14
#define I2C_IFDR_DIV640 0x15
#define I2C_IFDR_DIV768 0x16
#define I2C_IFDR_DIV960 0x17
#define I2C_IFDR_DIV1152 0x18
#define I2C_IFDR_DIV1280 0x19
#define I2C_IFDR_DIV1536 0x1a
#define I2C_IFDR_DIV1920 0x1b
#define I2C_IFDR_DIV2304 0x1c
#define I2C_IFDR_DIV2560 0x1d
#define I2C_IFDR_DIV3072 0x1e
#define I2C_IFDR_DIV3840 0x1f
#define I2C_IFDR_DIV22 0x20
#define I2C_IFDR_DIV24 0x21
#define I2C_IFDR_DIV26 0x22
#define I2C_IFDR_DIV28 0x23
#define I2C_IFDR_DIV32_2 0x24
#define I2C_IFDR_DIV36_2 0x25
#define I2C_IFDR_DIV40 0x26
#define I2C_IFDR_DIV44 0x27
#define I2C_IFDR_DIV48_2 0x28
#define I2C_IFDR_DIV56 0x29
#define I2C_IFDR_DIV64 0x2a
#define I2C_IFDR_DIV72_2 0x2b
#define I2C_IFDR_DIV80_2 0x2c
#define I2C_IFDR_DIV96 0x2d
#define I2C_IFDR_DIV112 0x2e
#define I2C_IFDR_DIV128_2 0x2f
#define I2C_IFDR_DIV160_2 0x30
#define I2C_IFDR_DIV192_2 0x31
#define I2C_IFDR_DIV224 0x32
#define I2C_IFDR_DIV256 0x33
#define I2C_IFDR_DIV320_2 0x34
#define I2C_IFDR_DIV384_2 0x35
#define I2C_IFDR_DIV448 0x36
#define I2C_IFDR_DIV512 0x37
#define I2C_IFDR_DIV640_2 0x38
#define I2C_IFDR_DIV768_2 0x39
#define I2C_IFDR_DIV896 0x3a
#define I2C_IFDR_DIV1024 0x3b
#define I2C_IFDR_DIV1280_2 0x3c
#define I2C_IFDR_DIV1536_2 0x3d
#define I2C_IFDR_DIV1792 0x3e
#define I2C_IFDR_DIV2048 0x3f
/* I2CR */
#define I2C_I2CR_IEN (1 << 7)
#define I2C_I2CR_IIEN (1 << 6)
#define I2C_I2CR_MSTA (1 << 5)
#define I2C_I2CR_MTX (1 << 4)
#define I2C_I2CR_TXAK (1 << 3)
#define I2C_I2CR_RSATA (1 << 2)
/* I2SR */
#define I2C_I2SR_ICF (1 << 7)
#define I2C_I2SR_IAAS (1 << 6)
#define I2C_I2SR_IBB (1 << 5)
#define I2C_I2SR_IAL (1 << 4)
#define I2C_I2SR_SRW (1 << 2)
#define I2C_I2SR_IIF (1 << 1)
#define I2C_I2SR_RXAK (1 << 0)
/* I2DR - [7:0] Data */
/* RTC */
#define RTC_HOURMIN (*(REG32_PTR_T)(RTC_BASE_ADDR+0x00))
#define RTC_SECONDS (*(REG32_PTR_T)(RTC_BASE_ADDR+0x04))
#define RTC_ALRM_HM (*(REG32_PTR_T)(RTC_BASE_ADDR+0x08))
#define RTC_ALRM_SEC (*(REG32_PTR_T)(RTC_BASE_ADDR+0x0C))
#define RTC_CTL (*(REG32_PTR_T)(RTC_BASE_ADDR+0x10))
#define RTC_ISR (*(REG32_PTR_T)(RTC_BASE_ADDR+0x14))
#define RTC_IENR (*(REG32_PTR_T)(RTC_BASE_ADDR+0x18))
#define RTC_STPWCH (*(REG32_PTR_T)(RTC_BASE_ADDR+0x1C))
#define RTC_DAYR (*(REG32_PTR_T)(RTC_BASE_ADDR+0x20))
#define RTC_DAYALARM (*(REG32_PTR_T)(RTC_BASE_ADDR+0x24))
/* Keypad */
#define KPP_KPCR (*(REG16_PTR_T)(KPP_BASE_ADDR+0x0))
#define KPP_KPSR (*(REG16_PTR_T)(KPP_BASE_ADDR+0x2))
#define KPP_KDDR (*(REG16_PTR_T)(KPP_BASE_ADDR+0x4))
#define KPP_KPDR (*(REG16_PTR_T)(KPP_BASE_ADDR+0x6))
/* KPP_KPSR bits */
#define KPP_KPSR_KRIE (1 << 9)
#define KPP_KPSR_KDIE (1 << 8)
#define KPP_KPSR_KRSS (1 << 3)
#define KPP_KPSR_KDSC (1 << 2)
#define KPP_KPSR_KPKR (1 << 1)
#define KPP_KPSR_KPKD (1 << 0)
/* ROMPATCH and AVIC */
#define ROMPATCH_BASE_ADDR 0x60000000
/* Since AVIC vector registers are NOT used, we reserve some for various
* purposes. Copied from Linux source code. */
#define CHIP_REV_1_0 0x10
#define CHIP_REV_2_0 0x20
#define SYSTEM_REV_ID_REG (AVIC_BASE_ADDR + AVIC_VEC_1)
#define SYSTEM_REV_ID_MAG 0xF00C
/*
* NAND, SDRAM, WEIM, M3IF, EMI controllers
*/
#define EXT_MEM_CTRL_BASE 0xB8000000
#define NFC_BASE EXT_MEM_CTRL_BASE
#define ESDCTL_BASE 0xB8001000
#define WEIM_BASE_ADDR 0xB8002000
#define WEIM_CTRL_CS0 (WEIM_BASE_ADDR+0x00)
#define WEIM_CTRL_CS1 (WEIM_BASE_ADDR+0x10)
#define WEIM_CTRL_CS2 (WEIM_BASE_ADDR+0x20)
#define WEIM_CTRL_CS3 (WEIM_BASE_ADDR+0x30)
#define WEIM_CTRL_CS4 (WEIM_BASE_ADDR+0x40)
#define M3IF_BASE 0xB8003000
#define PCMCIA_CTL_BASE 0xB8004000
/*
* Memory regions and CS
*/
#define IPU_MEM_BASE_ADDR 0x70000000
#define CSD0_BASE_ADDR 0x80000000
#define CSD1_BASE_ADDR 0x90000000
#define CS0_BASE_ADDR 0xA0000000
#define CS1_BASE_ADDR 0xA8000000
#define CS2_BASE_ADDR 0xB0000000
#define CS3_BASE_ADDR 0xB2000000
#define CS4_BASE_ADDR 0xB4000000
#define CS4_BASE_PSRAM 0xB5000000
#define CS5_BASE_ADDR 0xB6000000
#define PCMCIA_MEM_BASE_ADDR 0xC0000000
#define INTERNAL_ROM_VA 0xF0000000
/*
* SDRAM
*/
#define RAM_BANK0_BASE SDRAM_BASE_ADDR
/*
* IRQ Controller Register Definitions.
*/
#define AVIC_BASE_ADDR 0x68000000
#define INTCNTL (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x00))
#define NIMASK (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x04))
#define INTENNUM (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x08))
#define INTDISNUM (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x0C))
#define INTENABLEH (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x10))
#define INTENABLEL (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x14))
#define INTTYPEH (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x18))
#define INTTYPEL (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x1C))
#define NIPRIORITY(n) (((REG32_PTR_T)(AVIC_BASE_ADDR+0x20))[n])
#define NIPRIORITY7 (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x20))
#define NIPRIORITY6 (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x24))
#define NIPRIORITY5 (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x28))
#define NIPRIORITY4 (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x2C))
#define NIPRIORITY3 (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x30))
#define NIPRIORITY2 (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x34))
#define NIPRIORITY1 (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x38))
#define NIPRIORITY0 (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x3C))
#define NIVECSR (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x40))
#define FIVECSR (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x44))
#define INTSRCH (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x48))
#define INTSRCL (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x4C))
#define INTFRCH (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x50))
#define INTFRCL (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x54))
#define NIPNDH (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x58))
#define NIPNDL (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x5C))
#define FIPNDH (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x60))
#define FIPNDL (*(REG32_PTR_T)(AVIC_BASE_ADDR+0x64))
#define VECTOR_BASE_ADDR (AVIC_BASE_ADDR+0x100)
#define VECTOR(n) (((REG32_PTR_T)VECTOR_BASE_ADDR)[n])
/* The vectors go all the way up to 63. 4 bytes for each */
#define INTCNTL_ABFLAG (1 << 25)
#define INTCNTL_ABFEN (1 << 24)
#define INTCNTL_NIDIS (1 << 22)
#define INTCNTL_FIDIS (1 << 21)
#define INTCNTL_NIAD (1 << 20)
#define INTCNTL_FIAD (1 << 19)
#define INTCNTL_NM (1 << 18)
/* L210 */
#define L2CC_BASE_ADDR 0x30000000
#define L2_CACHE_LINE_SIZE 32
#define L2_CACHE_CTL_REG 0x100
#define L2_CACHE_AUX_CTL_REG 0x104
#define L2_CACHE_SYNC_REG 0x730
#define L2_CACHE_INV_LINE_REG 0x770
#define L2_CACHE_INV_WAY_REG 0x77C
#define L2_CACHE_CLEAN_LINE_REG 0x7B0
#define L2_CACHE_CLEAN_INV_LINE_REG 0x7F0
#define L2CC_CACHE_SYNC (*(REG32_PTR_T)(L2CC_BASE_ADDR+L2_CACHE_SYNC_REG))
/* CCM */
#define CLKCTL_CCMR (*(REG32_PTR_T)(CCM_BASE_ADDR+0x00))
#define CLKCTL_PDR0 (*(REG32_PTR_T)(CCM_BASE_ADDR+0x04))
#define CLKCTL_PDR1 (*(REG32_PTR_T)(CCM_BASE_ADDR+0x08))
#define CLKCTL_RCSR (*(REG32_PTR_T)(CCM_BASE_ADDR+0x0C))
#define CLKCTL_MPCTL (*(REG32_PTR_T)(CCM_BASE_ADDR+0x10))
#define CLKCTL_UPCTL (*(REG32_PTR_T)(CCM_BASE_ADDR+0x14))
#define CLKCTL_SPCTL (*(REG32_PTR_T)(CCM_BASE_ADDR+0x18))
#define CLKCTL_COSR (*(REG32_PTR_T)(CCM_BASE_ADDR+0x1C))
#define CLKCTL_CGR0 (*(REG32_PTR_T)(CCM_BASE_ADDR+0x20))
#define CLKCTL_CGR1 (*(REG32_PTR_T)(CCM_BASE_ADDR+0x24))
#define CLKCTL_CGR2 (*(REG32_PTR_T)(CCM_BASE_ADDR+0x28))
#define CLKCTL_WIMR0 (*(REG32_PTR_T)(CCM_BASE_ADDR+0x2C))
#define CLKCTL_LDC (*(REG32_PTR_T)(CCM_BASE_ADDR+0x30))
#define CLKCTL_DCVR0 (*(REG32_PTR_T)(CCM_BASE_ADDR+0x34))
#define CLKCTL_DCVR1 (*(REG32_PTR_T)(CCM_BASE_ADDR+0x38))
#define CLKCTL_DCVR2 (*(REG32_PTR_T)(CCM_BASE_ADDR+0x3C))
#define CLKCTL_DCVR3 (*(REG32_PTR_T)(CCM_BASE_ADDR+0x40))
#define CLKCTL_LTR0 (*(REG32_PTR_T)(CCM_BASE_ADDR+0x44))
#define CLKCTL_LTR1 (*(REG32_PTR_T)(CCM_BASE_ADDR+0x48))
#define CLKCTL_LTR2 (*(REG32_PTR_T)(CCM_BASE_ADDR+0x4C))
#define CLKCTL_LTR3 (*(REG32_PTR_T)(CCM_BASE_ADDR+0x50))
#define CLKCTL_LTBR0 (*(REG32_PTR_T)(CCM_BASE_ADDR+0x54))
#define CLKCTL_LTBR1 (*(REG32_PTR_T)(CCM_BASE_ADDR+0x58))
#define CLKCTL_PMCR0 (*(REG32_PTR_T)(CCM_BASE_ADDR+0x5C))
#define CLKCTL_PMCR1 (*(REG32_PTR_T)(CCM_BASE_ADDR+0x60))
#define CLKCTL_PDR2 (*(REG32_PTR_T)(CCM_BASE_ADDR+0x64))
#define CGR0_SD_MMC1(cg) ((cg) << 0*2)
#define CGR0_SD_MMC2(cg) ((cg) << 1*2)
#define CGR0_GPT(cg) ((cg) << 2*2)
#define CGR0_EPIT1(cg) ((cg) << 3*2)
#define CGR0_EPIT2(cg) ((cg) << 4*2)
#define CGR0_IIM(cg) ((cg) << 5*2)
#define CGR0_ATA(cg) ((cg) << 6*2)
#define CGR0_SDMA(cg) ((cg) << 7*2)
#define CGR0_CSPI3(cg) ((cg) << 8*2)
#define CGR0_RNG(cg) ((cg) << 9*2)
#define CGR0_UART1(cg) ((cg) << 10*2)
#define CGR0_UART2(cg) ((cg) << 11*2)
#define CGR0_SSI1(cg) ((cg) << 12*2)
#define CGR0_I2C1(cg) ((cg) << 13*2)
#define CGR0_I2C2(cg) ((cg) << 14*2)
#define CGR0_I2C3(cg) ((cg) << 15*2)
#define CGR1_HANTRO(cg) ((cg) << 0*2)
#define CGR1_MEMSTICK1(cg) ((cg) << 1*2)
#define CGR1_MEMSTICK2(cg) ((cg) << 2*2)
#define CGR1_CSI(cg) ((cg) << 3*2)
#define CGR1_RTC(cg) ((cg) << 4*2)
#define CGR1_WDOG(cg) ((cg) << 5*2)
#define CGR1_PWM(cg) ((cg) << 6*2)
#define CGR1_SIM(cg) ((cg) << 7*2)
#define CGR1_ECT(cg) ((cg) << 8*2)
#define CGR1_USBOTG(cg) ((cg) << 9*2)
#define CGR1_KPP(cg) ((cg) << 10*2)
#define CGR1_IPU(cg) ((cg) << 11*2)
#define CGR1_UART3(cg) ((cg) << 12*2)
#define CGR1_UART4(cg) ((cg) << 13*2)
#define CGR1_UART5(cg) ((cg) << 14*2)
#define CGR1_1_WIRE(cg) ((cg) << 15*2)
#define CGR2_SSI2(cg) ((cg) << 0*2)
#define CGR2_CSPI1(cg) ((cg) << 1*2)
#define CGR2_CSPI2(cg) ((cg) << 2*2)
#define CGR2_GACC(cg) ((cg) << 3*2)
#define CGR2_EMI(cg) ((cg) << 4*2)
#define CGR2_RTIC(cg) ((cg) << 5*2)
#define CGR2_FIR(cg) ((cg) << 6*2)
#define WIM_GPIO3 (1 << 0)
#define WIM_GPIO2 (1 << 1)
#define WIM_GPIO1 (1 << 2)
#define WIM_PCMCIA (1 << 3)
#define WIM_WDT (1 << 4)
#define WIM_USB_OTG (1 << 5)
#define WIM_IPI_INT_UH2 (1 << 6)
#define WIM_IPI_INT_UH1 (1 << 7)
#define WIM_IPI_INT_UART5_ANDED (1 << 8)
#define WIM_IPI_INT_UART4_ANDED (1 << 9)
#define WIM_IPI_INT_UART3_ANDED (1 << 10)
#define WIM_IPI_INT_UART2_ANDED (1 << 11)
#define WIM_IPI_INT_UART1_ANDED (1 << 12)
#define WIM_IPI_INT_SIM_DATA_IRQ (1 << 13)
#define WIM_IPI_INT_SDHC2 (1 << 14)
#define WIM_IPI_INT_SDHC1 (1 << 15)
#define WIM_IPI_INT_RTC (1 << 16)
#define WIM_IPI_INT_PWM (1 << 17)
#define WIM_IPI_INT_KPP (1 << 18)
#define WIM_IPI_INT_IIM (1 << 19)
#define WIM_IPI_INT_GPT (1 << 20)
#define WIM_IPI_INT_FIR (1 << 21)
#define WIM_IPI_INT_EPIT2 (1 << 22)
#define WIM_IPI_INT_EPIT1 (1 << 23)
#define WIM_IPI_INT_CSPI2 (1 << 24)
#define WIM_IPI_INT_CSPI1 (1 << 25)
#define WIM_IPI_INT_POWER_FAIL (1 << 26)
#define WIM_IPI_INT_CSPI3 (1 << 27)
#define WIM_RESERVED28 (1 << 28)
#define WIM_RESERVED29 (1 << 29)
#define WIM_RESERVED30 (1 << 30)
#define WIM_RESERVED31 (1 << 31)
/* WEIM - CS0 */
#define CSCRU 0x00
#define CSCRL 0x04
#define CSCRA 0x08
/* ESDCTL */
#define ESDCTL_ESDCTL0 0x00
#define ESDCTL_ESDCFG0 0x04
#define ESDCTL_ESDCTL1 0x08
#define ESDCTL_ESDCFG1 0x0C
#define ESDCTL_ESDMISC 0x10
/* More UART 1 Register defines */
#define URXD1 (*(REG32_PTR_T)(UART1_BASE_ADDR+0x00))
#define UTXD1 (*(REG32_PTR_T)(UART1_BASE_ADDR+0x40))
#define UCR1_1 (*(REG32_PTR_T)(UART1_BASE_ADDR+0x80))
#define UCR2_1 (*(REG32_PTR_T)(UART1_BASE_ADDR+0x84))
#define UCR3_1 (*(REG32_PTR_T)(UART1_BASE_ADDR+0x88))
#define UCR4_1 (*(REG32_PTR_T)(UART1_BASE_ADDR+0x8C))
#define UFCR1 (*(REG32_PTR_T)(UART1_BASE_ADDR+0x90))
#define USR1_1 (*(REG32_PTR_T)(UART1_BASE_ADDR+0x94))
#define USR2_1 (*(REG32_PTR_T)(UART1_BASE_ADDR+0x98))
#define UTS1 (*(REG32_PTR_T)(UART1_BASE_ADDR+0xB4))
/*
* UART Control Register 0 Bit Fields.
*/
#define EUARTUCR1_ADEN (1 << 15) // Auto detect interrupt
#define EUARTUCR1_ADBR (1 << 14) // Auto detect baud rate
#define EUARTUCR1_TRDYEN (1 << 13) // Transmitter ready interrupt enable
#define EUARTUCR1_IDEN (1 << 12) // Idle condition interrupt
#define EUARTUCR1_RRDYEN (1 << 9) // Recv ready interrupt enable
#define EUARTUCR1_RDMAEN (1 << 8) // Recv ready DMA enable
#define EUARTUCR1_IREN (1 << 7) // Infrared interface enable
#define EUARTUCR1_TXMPTYEN (1 << 6) // Transimitter empt interrupt enable
#define EUARTUCR1_RTSDEN (1 << 5) // RTS delta interrupt enable
#define EUARTUCR1_SNDBRK (1 << 4) // Send break
#define EUARTUCR1_TDMAEN (1 << 3) // Transmitter ready DMA enable
#define EUARTUCR1_DOZE (1 << 1) // Doze
#define EUARTUCR1_UARTEN (1 << 0) // UART enabled
#define EUARTUCR2_ESCI (1 << 15) // Escape seq interrupt enable
#define EUARTUCR2_IRTS (1 << 14) // Ignore RTS pin
#define EUARTUCR2_CTSC (1 << 13) // CTS pin control
#define EUARTUCR2_CTS (1 << 12) // Clear to send
#define EUARTUCR2_ESCEN (1 << 11) // Escape enable
#define EUARTUCR2_PREN (1 << 8) // Parity enable
#define EUARTUCR2_PROE (1 << 7) // Parity odd/even
#define EUARTUCR2_STPB (1 << 6) // Stop
#define EUARTUCR2_WS (1 << 5) // Word size
#define EUARTUCR2_RTSEN (1 << 4) // Request to send interrupt enable
#define EUARTUCR2_ATEN (1 << 3) // Aging timer enable
#define EUARTUCR2_TXEN (1 << 2) // Transmitter enabled
#define EUARTUCR2_RXEN (1 << 1) // Receiver enabled
#define EUARTUCR2_SRST_ (1 << 0) // SW reset
#define EUARTUCR3_PARERREN (1 << 12) // Parity enable
#define EUARTUCR3_FRAERREN (1 << 11) // Frame error interrupt enable
#define EUARTUCR3_ADNIMP (1 << 7) // Autobaud detection not improved
#define EUARTUCR3_RXDSEN (1 << 6) // Receive status interrupt enable
#define EUARTUCR3_AIRINTEN (1 << 5) // Async IR wake interrupt enable
#define EUARTUCR3_AWAKEN (1 << 4) // Async wake interrupt enable
#define EUARTUCR3_RXDMUXSEL (1 << 2) // RXD muxed input selected
#define EUARTUCR3_INVT (1 << 1) // Inverted Infrared transmission
#define EUARTUCR3_ACIEN (1 << 0) // Autobaud counter interrupt enable
#define EUARTUCR4_CTSTL_32 (32 << 10) // CTS trigger level (32 chars)
#define EUARTUCR4_INVR (1 << 9) // Inverted infrared reception
#define EUARTUCR4_ENIRI (1 << 8) // Serial infrared interrupt enable
#define EUARTUCR4_WKEN (1 << 7) // Wake interrupt enable
#define EUARTUCR4_IRSC (1 << 5) // IR special case
#define EUARTUCR4_LPBYP (1 << 4) // Low power bypass
#define EUARTUCR4_TCEN (1 << 3) // Transmit complete interrupt enable
#define EUARTUCR4_BKEN (1 << 2) // Break condition interrupt enable
#define EUARTUCR4_OREN (1 << 1) // Receiver overrun interrupt enable
#define EUARTUCR4_DREN (1 << 0) // Recv data ready interrupt enable
#define EUARTUFCR_RXTL_SHF 0 // Receiver trigger level shift
#define EUARTUFCR_RFDIV_1 (5 << 7) // Reference freq divider (div> 1)
#define EUARTUFCR_RFDIV_2 (4 << 7) // Reference freq divider (div> 2)
#define EUARTUFCR_RFDIV_3 (3 << 7) // Reference freq divider (div 3)
#define EUARTUFCR_RFDIV_4 (2 << 7) // Reference freq divider (div 4)
#define EUARTUFCR_RFDIV_5 (1 << 7) // Reference freq divider (div 5)
#define EUARTUFCR_RFDIV_6 (0 << 7) // Reference freq divider (div 6)
#define EUARTUFCR_RFDIV_7 (6 << 7) // Reference freq divider (div 7)
#define EUARTUFCR_TXTL_SHF 10 // Transmitter trigger level shift
#define EUARTUSR1_PARITYERR (1 << 15) // Parity error interrupt flag
#define EUARTUSR1_RTSS (1 << 14) // RTS pin status
#define EUARTUSR1_TRDY (1 << 13) // Transmitter ready interrupt/dma flag
#define EUARTUSR1_RTSD (1 << 12) // RTS delta
#define EUARTUSR1_ESCF (1 << 11) // Escape seq interrupt flag
#define EUARTUSR1_FRAMERR (1 << 10) // Frame error interrupt flag
#define EUARTUSR1_RRDY (1 << 9) // Receiver ready interrupt/dma flag
#define EUARTUSR1_AGTIM (1 << 8) // Aging timeout interrupt status
#define EUARTUSR1_RXDS (1 << 6) // Receiver idle interrupt flag
#define EUARTUSR1_AIRINT (1 << 5) // Async IR wake interrupt flag
#define EUARTUSR1_AWAKE (1 << 4) // Aysnc wake interrupt flag
#define EUARTUSR2_ADET (1 << 15) // Auto baud rate detect complete
#define EUARTUSR2_TXFE (1 << 14) // Transmit buffer FIFO empty
#define EUARTUSR2_IDLE (1 << 12) // Idle condition
#define EUARTUSR2_ACST (1 << 11) // Autobaud counter stopped
#define EUARTUSR2_IRINT (1 << 8) // Serial infrared interrupt flag
#define EUARTUSR2_WAKE (1 << 7) // Wake
#define EUARTUSR2_RTSF (1 << 4) // RTS edge interrupt flag
#define EUARTUSR2_TXDC (1 << 3) // Transmitter complete
#define EUARTUSR2_BRCD (1 << 2) // Break condition
#define EUARTUSR2_ORE (1 << 1) // Overrun error
#define EUARTUSR2_RDR (1 << 0) // Recv data ready
#define EUARTUTS_FRCPERR (1 << 13) // Force parity error
#define EUARTUTS_LOOP (1 << 12) // Loop tx and rx
#define EUARTUTS_TXEMPTY (1 << 6) // TxFIFO empty
#define EUARTUTS_RXEMPTY (1 << 5) // RxFIFO empty
#define EUARTUTS_TXFULL (1 << 4) // TxFIFO full
#define EUARTUTS_RXFULL (1 << 3) // RxFIFO full
#define EUARTUTS_SOFTRST (1 << 0) // Software reset
#define L2CC_ENABLED
/* Assuming 26MHz input clock */
/* PD MFD MFI MFN */
#define MPCTL_PARAM_208 ((1 << 26) + (0 << 16) + (8 << 10) + (0 << 0))
#define MPCTL_PARAM_399 ((0 << 26) + (51 << 16) + (7 << 10) + (35 << 0))
#define MPCTL_PARAM_532 ((0 << 26) + (51 << 16) + (10 << 10) + (12 << 0))
/* UPCTL PD MFD MFI MFN */
#define UPCTL_PARAM_288 (((1-1) << 26) + ((13-1) << 16) + (5 << 10) + (7 << 0))
#define UPCTL_PARAM_240 (((2-1) << 26) + ((13-1) << 16) + (9 << 10) + (3 << 0))
/* PDR0 */
#define PDR0_208_104_52 0xFF870D48 /* ARM=208MHz, HCLK=104MHz, IPG=52MHz */
#define PDR0_399_66_66 0xFF872B28 /* ARM=399MHz, HCLK=IPG=66.5MHz */
#define PDR0_399_133_66 0xFF871650 /* ARM=399MHz, HCLK=133MHz, IPG=66.5MHz */
#define PDR0_532_133_66 0xFF871E58 /* ARM=532MHz, HCLK=133MHz, IPG=66MHz */
#define PDR0_665_83_66 0xFF873D78 /* ARM=532MHz, HCLK=133MHz, IPG=66MHz */
#define PDR0_665_133_66 0xFF872660 /* ARM=532MHz, HCLK=133MHz, IPG=66MHz */
#define PBC_BASE CS4_BASE_ADDR /* Peripheral Bus Controller */
#define PBC_BSTAT2 0x2
#define PBC_BCTRL1 0x4
#define PBC_BCTRL1_CLR 0x6
#define PBC_BCTRL2 0x8
#define PBC_BCTRL2_CLR 0xA
#define PBC_BCTRL3 0xC
#define PBC_BCTRL3_CLR 0xE
#define PBC_BCTRL4 0x10
#define PBC_BCTRL4_CLR 0x12
#define PBC_BSTAT1 0x14
#define MX31EVB_CS_LAN_BASE (CS4_BASE_ADDR + 0x00020000 + 0x300)
#define MX31EVB_CS_UART_BASE (CS4_BASE_ADDR + 0x00010000)
#define REDBOOT_IMAGE_SIZE 0x40000
#define SDRAM_WORKAROUND_FULL_PAGE
#define ARMHIPG_208_52_52 /* ARM: 208MHz, HCLK=IPG=52MHz*/
#define ARMHIPG_52_52_52 /* ARM: 52MHz, HCLK=IPG=52MHz*/
#define ARMHIPG_399_66_66
#define ARMHIPG_399_133_66
/* MX31 EVB SDRAM is from 0x80000000, 64M */
#define SDRAM_BASE_ADDR CSD0_BASE_ADDR
#define SDRAM_SIZE 0x04000000
#define UART_WIDTH_32 /* internal UART is 32bit access only */
#define EXT_UART_x16
#define UART_WIDTH_32 /* internal UART is 32bit access only */
#define FLASH_BURST_MODE_ENABLE 1
#define SDRAM_COMPARE_CONST1 0x55555555
#define SDRAM_COMPARE_CONST2 0xAAAAAAAA
#define UART_FIFO_CTRL 0x881
#define TIMEOUT 1000
#define USB_BASE OTG_BASE_ADDR
#endif /* __IMX31L_H__ */