| .. |
|
config
|
Sansa clipzip: make main build compile (plugins still disabled)
|
2011-09-24 11:21:01 +00:00 |
|
adc.h
|
FS#10756 - Free unused init code
|
2010-03-03 23:20:32 +00:00 |
|
ak4537.h
|
|
|
|
akcodec.h
|
|
|
|
as3514.h
|
Sansa AMS/AMSv2: analog front-end register CVDD/DCDC3 doesn't exist in AMSv2, so don't modify it
|
2011-09-21 21:48:19 +00:00 |
|
as3525.h
|
Fuze V2: Fix hold switch behavior. Add a GPIOx_PIN_MASK macro to AS3525.
|
2011-01-20 14:26:58 +00:00 |
|
as3525v2.h
|
Define CACHEALIGN_BITS for missing ARM CPUs for later use.
|
2010-11-19 07:17:20 +00:00 |
|
ascodec.h
|
|
|
|
at91sam9260.h
|
Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h
|
2009-06-29 14:30:12 +00:00 |
|
ata-defines.h
|
Fix yellow
|
2011-01-02 23:09:01 +00:00 |
|
ata.h
|
Fix yellow
|
2011-01-02 23:09:01 +00:00 |
|
ata_idle_notify.h
|
Rockbox as an application: Replace many occurences of #ifdef SIMULATOR with #if (CONFIG_PLATFORM & PLATFORM_HOSTED) (or equivalently).
|
2010-06-21 16:53:00 +00:00 |
|
ata_mmc.h
|
Merge tCardInfo struct (MMC) and tSDCardInfo struct (SD)
|
2009-07-01 10:07:22 +00:00 |
|
audio.h
|
GSoC/Buflib: Add buflib memory alocator to the core.
|
2011-08-30 14:01:33 +00:00 |
|
audiohw.h
|
rk27xx - adjust core files for rk27xx internal codec
|
2011-09-06 12:39:24 +00:00 |
|
backlight-sw-fading.h
|
|
|
|
backlight.h
|
FS#10756 - Free unused init code
|
2010-03-03 23:20:32 +00:00 |
|
bidi.h
|
|
|
|
bitswap.h
|
|
|
|
bootchart.h
|
bootchart.h doesn't need _ansi.h, especially not in a relative path
|
2010-07-25 15:28:24 +00:00 |
|
button.h
|
Add support multimedia keys/buttons to the core, and adapt Rockbox on android for it (multimedia buttons are found on wired headsets and the lock screen in cyanogenmod).
|
2010-10-31 15:32:57 +00:00 |
|
config.h
|
imx233/fuze+: don't use iram in plugins and in codecs
|
2011-10-02 15:39:30 +00:00 |
|
config_caps.h
|
|
|
|
cpu.h
|
Rockchip rk27xx port initial commit. This is still work in progress.
|
2011-05-30 21:10:37 +00:00 |
|
cs42l55.h
|
Fix CS42L55 (iPod Classic) tone control
|
2011-01-07 23:09:09 +00:00 |
|
cscodec.h
|
New port: iPod Classic (also known as iPod 6G/6.5G/7G)
|
2011-01-02 23:16:27 +00:00 |
|
dac3550a.h
|
Separate mas35xx lowlevel stuff. Move SH specific bits to target tree. FS#11189 by me.
|
2010-10-31 21:09:34 +00:00 |
|
debug.h
|
RaaA: Add initial Pandora support
|
2011-02-27 23:42:37 +00:00 |
|
disk.h
|
Accept FS#11774 by Michael Hohmuth (with some own modifications to #ifdef conditions)
|
2010-11-28 15:22:51 +00:00 |
|
dm320.h
|
DM320: Add CPU revisions as defines.
|
2011-02-06 19:14:09 +00:00 |
|
ds2411.h
|
|
|
|
eeprom_24cxx.h
|
|
|
|
eeprom_settings.h
|
|
|
|
enc_base.h
|
|
|
|
events.h
|
FS#11263 - Radio Art support! %C and %Cl tags work in the radio screen and Base Skin when the radio is running.
|
2010-05-16 11:13:42 +00:00 |
|
fat.h
|
iPod Classic CE-ATA Support (Part 2 of 4: Remove on-stack sector buffers, and replace them with a single statically allocated sector buffer that's arbitrated amongst users)
|
2011-02-27 22:44:54 +00:00 |
|
filefuncs.h
|
struct DIR -> DIR, should fix most if not all reds.
|
2010-09-01 21:45:58 +00:00 |
|
fmradio.h
|
|
|
|
fmradio_i2c.h
|
mark some functions as init functions (discarded after init() has run)
|
2010-05-27 12:00:29 +00:00 |
|
font.h
|
Allow fonts to use smaller buffers than the default size. use font_load_ex() to speficiy the buffer size. If the font is already loaded with a smaller buffer it will be reloaded to use the new size. Also fix an issue where handles would get lost if fonts fail to load in skins
|
2011-09-24 14:52:16 +00:00 |
|
gdb_api.h
|
|
|
|
general.h
|
Simplify mpegplayer a bit and use array-based lists rather than linked lists for stream management. Move a couple useful functions to handle pointer arrays from kernel.c into general.c; mpeglayer now makes use of them.
|
2010-05-17 12:34:05 +00:00 |
|
generic_i2c.h
|
Apply FS #11423 - Use udelay in AMS driver for FM radio I2C
|
2010-06-21 21:41:07 +00:00 |
|
hangul.h
|
|
|
|
hd66789r.h
|
|
|
|
hwcompat.h
|
Rockbox as an application: Replace many occurences of #ifdef SIMULATOR with #if (CONFIG_PLATFORM & PLATFORM_HOSTED) (or equivalently).
|
2010-06-21 16:53:00 +00:00 |
|
i2c-coldfire.h
|
Fix more tabs
|
2010-01-03 10:27:43 +00:00 |
|
i2c-pp.h
|
|
|
|
i2c-rk27xx.h
|
Rockchip rk27xx port initial commit. This is still work in progress.
|
2011-05-30 21:10:37 +00:00 |
|
i2c-s5l8700.h
|
|
|
|
i2c-s5l8702.h
|
New port: iPod Classic (also known as iPod 6G/6.5G/7G)
|
2011-01-02 23:16:27 +00:00 |
|
i2c.h
|
imx233/fuze+: replace software i2c by hardware i2c, make some code more correct, reduce code size of lcd init sequences
|
2011-07-03 15:18:41 +00:00 |
|
i2s.h
|
|
|
|
iap.h
|
IAP: use a state machine for handling iap packets, based on FS#12135
|
2011-09-25 12:19:33 +00:00 |
|
ifp_usb_serial.h
|
|
|
|
imx31l.h
|
Clean up multiple definitions of RAM size. Remove -DMEM (make) and MEM (code), use the already defined MEMORYSIZE instead.
|
2011-02-02 17:43:32 +00:00 |
|
imx233-codec.h
|
imx233/fuze+: huge rework
|
2011-07-23 11:45:22 +00:00 |
|
imx233.h
|
imx233/fuze+: implement user time api, implement a stub function, protect timrot against irq
|
2011-09-06 00:27:38 +00:00 |
|
ipod_remote_tuner.h
|
iap: pass length and data pointer to iap_handlepkt functions, this prepares for iap large packet support.
|
2011-05-02 21:55:13 +00:00 |
|
isp1362.h
|
|
|
|
isp1583.h
|
Correct svn:keywords and svn:eol-style on a few more files.
|
2009-07-12 09:43:44 +00:00 |
|
jz4740-codec.h
|
|
|
|
jz4740.h
|
Ingenic Jz4740: add basic frequency switching
|
2009-07-03 21:34:40 +00:00 |
|
jz_mxu.h
|
|
|
|
kernel.h
|
Get rid of a committed #define from kernel.h that didn't make the final cut. Put voice_wait in voice_thread.h where it ought.
|
2011-04-27 04:00:48 +00:00 |
|
lcd-charcell.h
|
|
|
|
lcd-remote.h
|
Forgot to update lcd-remote.h
|
2010-10-11 01:23:40 +00:00 |
|
lcd.h
|
Touchscreen: Improved scroll threshold
|
2010-11-10 15:25:15 +00:00 |
|
led.h
|
|
|
|
load_code.h
|
Extend lc_open() to also being able to load overlay plugins.
|
2010-09-09 16:17:21 +00:00 |
|
logf.h
|
Move some gcc extensions to new gcc_extensions.h header
|
2010-07-25 14:44:29 +00:00 |
|
ltv350qv.h
|
|
|
|
lv24020lp.h
|
Signal strength meter for FM radio - FS#8151 by Przemysław Hołubowski
|
2010-11-11 21:13:29 +00:00 |
|
m5636.h
|
|
|
|
m66591.h
|
Correct svn:keywords and svn:eol-style on a few more files.
|
2009-07-12 09:43:44 +00:00 |
|
mas35xx.h
|
Separate mas35xx lowlevel stuff. Move SH specific bits to target tree. FS#11189 by me.
|
2010-10-31 21:09:34 +00:00 |
|
mascodec.h
|
Separate mas35xx lowlevel stuff. Move SH specific bits to target tree. FS#11189 by me.
|
2010-10-31 21:09:34 +00:00 |
|
mc13783.h
|
i.MX31/Gigabeat S: Actually enable DPTC which can set optimal voltage for 528MHz. Requires an SPI and PMIC interface rework because of the low-latency needs for the DPTC to work best with minimal panicing. SPI can work with multitasking and asynchronously from interrupt handlers or normal code.
|
2010-05-04 10:07:53 +00:00 |
|
mcf5249.h
|
Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h
|
2009-06-29 14:30:12 +00:00 |
|
mcf5250.h
|
|
|
|
mips-archdefs.h
|
|
|
|
mips.h
|
|
|
|
mipsregs.h
|
|
|
|
mmc.h
|
Commit FS#9545, storage cleanup and multi-driver support
|
2009-07-17 22:28:49 +00:00 |
|
mp3_playback.h
|
|
|
|
mv.h
|
Commit FS#9545, storage cleanup and multi-driver support
|
2009-07-17 22:28:49 +00:00 |
|
nand.h
|
Core changes to allow storage drivers to do cleanup on shutdown, and iPod Nano 2G shutdown code rework (FS#10668)
|
2009-10-09 20:36:09 +00:00 |
|
nand_id.h
|
Correct svn:keywords and svn:eol-style on a few more files.
|
2009-07-12 09:43:44 +00:00 |
|
ohci.h
|
Add data structures
|
2009-07-12 15:29:22 +00:00 |
|
panic.h
|
Move some gcc extensions to new gcc_extensions.h header
|
2010-07-25 14:44:29 +00:00 |
|
pcf5060x.h
|
D2: Use a common function for reading ADC values from the PMU
|
2009-10-08 15:47:43 +00:00 |
|
pcf5063x.h
|
Initial support for runtime detection of the PMU used in newer D2+ models (PCF50635). The backlight and battery monitoring should work, but the RTC and touchscreen are not yet implemented.
|
2009-10-10 17:35:02 +00:00 |
|
pcf50605.h
|
|
|
|
pcf50606.h
|
D2: Use a common function for reading ADC values from the PMU
|
2009-10-08 15:47:43 +00:00 |
|
pcf50635.h
|
Initial support for runtime detection of the PMU used in newer D2+ models (PCF50635). The backlight and battery monitoring should work, but the RTC and touchscreen are not yet implemented.
|
2009-10-10 17:35:02 +00:00 |
|
pcm-internal.h
|
Shuffle some functions around so that interfacing with playback.c in particular isn't required. Though playback does finish the audio init, pcm doesn't care who does it.
|
2011-09-01 12:15:43 +00:00 |
|
pcm.h
|
Shuffle some functions around so that interfacing with playback.c in particular isn't required. Though playback does finish the audio init, pcm doesn't care who does it.
|
2011-09-01 12:15:43 +00:00 |
|
pcm_mixer.h
|
Use playback channel directly for peakmeters and plugins using peak calculation. Also, for now, don't allow mixer playback to overlap recording, even if full duplex works.
|
2011-07-02 11:55:38 +00:00 |
|
pcm_sampr.h
|
Should clear up rest of red. Add a required #define in the config for c200. Fix up some preprocessing directives. Hope it's all taken care of now.
|
2010-06-26 10:37:41 +00:00 |
|
pl081.h
|
|
|
|
pl180.h
|
AMS Sansa: Add voltage defines to pl180.h. No functional changes.
|
2009-10-19 05:34:17 +00:00 |
|
pnx0101.h
|
Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h
|
2009-06-29 14:30:12 +00:00 |
|
power.h
|
Rockbox as an application: Replace many occurences of #ifdef SIMULATOR with #if (CONFIG_PLATFORM & PLATFORM_HOSTED) (or equivalently).
|
2010-06-21 16:53:00 +00:00 |
|
powermgmt.h
|
Bring idle poweroff to RaaA and the sim
|
2011-03-08 19:33:30 +00:00 |
|
pp5002.h
|
Move CACHEALIGN_BITS to cpu headers
|
2010-04-13 15:50:08 +00:00 |
|
pp5020.h
|
Bootloader USB mode for PP502x. Enable only on GoGear SA9200 for the time being. Add HAVE_BOOTLOADER_USB_MODE to config if BOOTLOADER is defined to enable it. Clean up some kernel stuff a little to support it. Mess up a bunch of other stuff (hopefully not too badly).
|
2011-01-15 08:19:30 +00:00 |
|
pp5024.h
|
|
|
|
pp6100.h
|
Add information gleaned from disassembling the main firmware image. Detect lcd type in use. Still no actual output
|
2009-07-17 20:40:40 +00:00 |
|
profile.h
|
|
|
|
qt1106.h
|
|
|
|
r61509.h
|
Onda VX7x7: fix error when compiling with USB_BOOT defined
|
2009-07-29 12:57:42 +00:00 |
|
ramdisk.h
|
Ramdisk: add hotswap support
|
2010-10-26 12:27:33 +00:00 |
|
rbpaths.h
|
Android: install codecs as native libs instead of extracting them (FS#12134).
|
2011-05-31 21:26:18 +00:00 |
|
rda5802.h
|
Signal strength meter for FM radio - FS#8151 by Przemysław Hołubowski
|
2010-11-11 21:13:29 +00:00 |
|
rk27xx.h
|
rk27xx - implement cache_commit_discard(). Cache is still not enabled in crt0.S
|
2011-07-19 06:49:03 +00:00 |
|
rk27xx_codec.h
|
Implement driver for internal codec in rk27xx (shCODlp-100.01-HD IP core from Dolphin)
|
2011-09-06 12:37:57 +00:00 |
|
rolo.h
|
|
|
|
rtc.h
|
rtc_enable_alarm() needs no return value
|
2010-05-22 00:28:26 +00:00 |
|
s1a0903x01.h
|
|
|
|
s3c2440.h
|
s5l870x : use mmu-arm.S
|
2010-04-13 15:59:49 +00:00 |
|
s5l8700.h
|
usb-s3c6400x.[ch], button-clickwheel.c: Move s5l8701-specific parts to where they belong, prepare for s5l8702
|
2010-12-12 00:52:02 +00:00 |
|
s5l8702.h
|
iPod Classic: Fix YUV blitting. Mpegplayer works now.
|
2011-02-28 11:54:28 +00:00 |
|
screendump.h
|
Really fix yellow: Rename BMP_LINESIZE and BMP_BPP to get rid of the macro name collision
|
2010-10-25 12:52:02 +00:00 |
|
scroll_engine.h
|
Pixel-accurate (vertical) list scrolling for touchscreen targets.
|
2010-10-06 12:46:42 +00:00 |
|
sd.h
|
Bootloader USB mode for PP502x. Enable only on GoGear SA9200 for the time being. Add HAVE_BOOTLOADER_USB_MODE to config if BOOTLOADER is defined to enable it. Clean up some kernel stuff a little to support it. Mess up a bunch of other stuff (hopefully not too badly).
|
2011-01-15 08:19:30 +00:00 |
|
sdmmc.h
|
Remove card_enable_monitoring() and use a mutex instead. The card_enable_monitoring() method actually didn't eliminate the possible race conditions it was meant to fix.
|
2010-06-06 13:20:47 +00:00 |
|
serial.h
|
|
|
|
sh7034.h
|
Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h
|
2009-06-29 14:30:12 +00:00 |
|
si4700.h
|
fix reds, not so nice fiddling with simulator stubs to make it all works
|
2010-11-18 11:57:51 +00:00 |
|
sound.h
|
Gigabeat S: Fully enable access to hardware tone controls and 3-D effect feature. Under the hood, it's designated a hardware equalizer since it is one. Implement code framework for hardware EQ in general. Menu aspect is well abstracted and so the UI and strings can be changed around if taste doesn't quite suit. So far the emphasis is distinction of the UI labelling from the software EQ so that it's clear the settings are for a different thing.
|
2010-05-15 13:09:45 +00:00 |
|
spdif.h
|
|
|
|
spi.h
|
Correct svn:keywords and svn:eol-style on a few more files.
|
2009-07-12 09:43:44 +00:00 |
|
storage.h
|
Bootloader USB mode for PP502x. Enable only on GoGear SA9200 for the time being. Add HAVE_BOOTLOADER_USB_MODE to config if BOOTLOADER is defined to enable it. Clean up some kernel stuff a little to support it. Mess up a bunch of other stuff (hopefully not too badly).
|
2011-01-15 08:19:30 +00:00 |
|
structec.h
|
|
|
|
sw_i2c.h
|
|
|
|
synaptics-mep.h
|
SA9200: Adjust touchpad sensitivities so that actual contact with the player is needed to cause button presses and hopefully those settings will work nicely. Add a parameter read function to the MEP driver for debugging and RE purposes; enable compilation of it if you want to use it. Make a note in power-sa9200.c about button inits.
|
2011-01-11 23:48:29 +00:00 |
|
synaptics-rmi.h
|
imx233/fuze+: replace software i2c by hardware i2c, make some code more correct, reduce code size of lcd init sequences
|
2011-07-03 15:18:41 +00:00 |
|
system.h
|
Fix last yellows.
|
2011-08-30 14:38:16 +00:00 |
|
tcc77x.h
|
Define CACHEALIGN_BITS for missing ARM CPUs for later use.
|
2010-11-19 07:17:20 +00:00 |
|
tcc780x.h
|
Define CACHEALIGN_BITS for missing ARM CPUs for later use.
|
2010-11-19 07:17:20 +00:00 |
|
tea5760.h
|
Signal strength meter for FM radio - FS#8151 by Przemysław Hołubowski
|
2010-11-11 21:13:29 +00:00 |
|
tea5767.h
|
Signal strength meter for FM radio - FS#8151 by Przemysław Hołubowski
|
2010-11-11 21:13:29 +00:00 |
|
thread.h
|
Change the thread api a bit.
|
2011-03-05 17:48:06 +00:00 |
|
timer.h
|
Rockbox as an application: Replace many occurences of #ifdef SIMULATOR with #if (CONFIG_PLATFORM & PLATFORM_HOSTED) (or equivalently).
|
2010-06-21 16:53:00 +00:00 |
|
tlv320.h
|
|
|
|
touchscreen.h
|
Touchscreen: Improved scroll threshold
|
2010-11-10 15:25:15 +00:00 |
|
tsc200x.h
|
Touchscreen support for newer Cowon D2+ hardware revisions (using TSC200x touchscreen controller).
|
2009-10-15 20:13:29 +00:00 |
|
tsc2100.h
|
M:Robe 500 and TSC2100: Add more to the initialization. Some GPIO initializations are now removed - this will be hanled by the OF or bootloader (when loading from flash).
|
2011-02-06 19:33:40 +00:00 |
|
tuner.h
|
fix reds, not so nice fiddling with simulator stubs to make it all works
|
2010-11-18 11:57:51 +00:00 |
|
uda1341.h
|
Improvements to mini2440/UDA1341 audio
|
2009-11-01 22:58:08 +00:00 |
|
uda1380.h
|
Fix more tabs
|
2010-01-03 10:27:43 +00:00 |
|
udacodec.h
|
|
|
|
usb-s3c6400x.h
|
usb-s3c6400x.[ch], button-clickwheel.c: Move s5l8701-specific parts to where they belong, prepare for s5l8702
|
2010-12-12 00:52:02 +00:00 |
|
usb-tcc.h
|
Fix more tabs
|
2010-01-03 10:27:43 +00:00 |
|
usb.h
|
Remove obsolete USB_DETECT_BY_DRV define throughout.
|
2011-09-14 16:42:43 +00:00 |
|
usb_ch9.h
|
Fix more tabs
|
2010-01-03 10:27:43 +00:00 |
|
usb_core.h
|
New USB charging system, part 1 - API rework and user-visible setting update
|
2010-06-05 10:05:27 +00:00 |
|
usb_drv.h
|
usb_drv_reset() is only used in usb-drv-arc.c
|
2010-09-16 05:46:24 +00:00 |
|
wm8731.h
|
|
|
|
wm8751.h
|
slightly modified FS#11531 by me: WM8750/51 driver rework
|
2011-03-14 09:58:19 +00:00 |
|
wm8758.h
|
Submit first part of FS#12154. Whitespace removal and correction of several defines in WM8758 driver according to data sheet, no functional change. Thanks to Seheon Ryu.
|
2011-06-20 18:37:51 +00:00 |
|
wm8975.h
|
Fix FS#11973. iPod nano1G needed reboot after entering record mode to have audio again.
|
2011-03-03 20:53:30 +00:00 |
|
wm8978.h
|
Gigabeat S: Fully enable access to hardware tone controls and 3-D effect feature. Under the hood, it's designated a hardware equalizer since it is one. Implement code framework for hardware EQ in general. Menu aspect is well abstracted and so the UI and strings can be changed around if taste doesn't quite suit. So far the emphasis is distinction of the UI labelling from the software EQ so that it's clear the settings are for a different thing.
|
2010-05-15 13:09:45 +00:00 |
|
wm8985.h
|
Submit FS#11240 by Raphael Jakse. Allows to reduce volume on WM8985 to -89 dB (e.g. used for Cowon D2). Below -57 dB the line out is affected. The manual is updated accordingly.
|
2010-05-30 18:29:04 +00:00 |
|
wmcodec.h
|
|
|
4157c23c6f