Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
29258 commits 17 branches 142 tags 291 MiB
Commit graph

470 commits

Author SHA1 Message Date
Jonathan Gordon
76e662b8e5 fix the e200r installer so it compiles again (storage rework broke it) 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19195 a1c6a512-1295-4272-9138-f99709370657
 2008-11-24 04:43:31 +00:00
Björn Stenberg
b69be10d98 Use BOOTDIR and BOOTFILE defines instead of hardcoded path and file. FS#9559 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19190 a1c6a512-1295-4272-9138-f99709370657
 2008-11-23 22:07:48 +00:00
Frank Gevaerts
ac355de664 Don't print partition sizes in megabytes, as that is buggy on 5.5G. Use sectors instead 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19170 a1c6a512-1295-4272-9138-f99709370657
 2008-11-21 15:20:25 +00:00
Björn Stenberg
c6b3d38a15 New makefile solution: A single invocation of 'make' to build the entire tree. Fully controlled dependencies give faster and more correct recompiles. 
Many #include lines adjusted to conform to the new standards.


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19146 a1c6a512-1295-4272-9138-f99709370657
 2008-11-20 11:27:31 +00:00
Rob Purchase
9f0fbec999 Show the Rockbox logo in the Telechips bootloader. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19129 a1c6a512-1295-4272-9138-f99709370657
 2008-11-17 21:16:00 +00:00
Karl Kurbjun
f32336e4a5 Last commit for the flash bootloader. The bootloader build works properly either flashed or unflashed. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19098 a1c6a512-1295-4272-9138-f99709370657
 2008-11-12 05:11:18 +00:00
Karl Kurbjun
59d4d2025c Revert last commit (accidentally committed the whole tree) 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19095 a1c6a512-1295-4272-9138-f99709370657
 2008-11-12 04:15:34 +00:00
Karl Kurbjun
d42041043b Add in the needed crt0.S code for the wakeup alarm also 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19094 a1c6a512-1295-4272-9138-f99709370657
 2008-11-12 03:57:32 +00:00
Jonathan Gordon
ce505b8a01 the delay in the as3525 bootloader was driving me mad so remove it and get the bootloader closer to where a "finished" one should be (only show info if sometrhing needs to be shown, which is always for now.) 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19085 a1c6a512-1295-4272-9138-f99709370657
 2008-11-11 11:01:55 +00:00
Rafaël Carré
f7b1d806e6 Sansa AMS bootloader: use the correct (renamed) header file 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19075 a1c6a512-1295-4272-9138-f99709370657
 2008-11-10 20:36:02 +00:00
Bertrik Sikken
4ca4e523fe Rename functions as3525_codec_* to ascodec_* to prepare re-use of as3514 code for sansa v2 players 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19047 a1c6a512-1295-4272-9138-f99709370657
 2008-11-09 09:25:53 +00:00
Rafaël Carré
aef27e1f0c Sansav2 Bootloader 
Adds read-only SD driver, largely copied from ata-sd-pp.c
Only tested on the embedded SD, on the Clip
First steps to build a Normal firmware

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19045 a1c6a512-1295-4272-9138-f99709370657
 2008-11-09 06:17:21 +00:00
Rafaël Carré
6e645cc4eb AS3525: we won't use threads in the bootloader 
Disable tick_start()
Call kernel_init() _after_ system_init()

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19028 a1c6a512-1295-4272-9138-f99709370657
 2008-11-06 15:24:19 +00:00
Rafaël Carré
baecdb632c AS3525: use kernel_init() in bootloader 
This way creation of scrolling thread doesn't risk crashing the system

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19026 a1c6a512-1295-4272-9138-f99709370657
 2008-11-06 02:31:40 +00:00
Frank Gevaerts
86f0c75cde fix red 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18976 a1c6a512-1295-4272-9138-f99709370657
 2008-11-02 01:31:52 +00:00
Frank Gevaerts
2f8a0081c6 Apply FS#9500. This adds a storage_*() abstraction to replace ata_*(). To do that, it also introduces sd_*, nand_*, and mmc_*. 
This should be a good first step to allow multi-driver targets, like the Elio (ATA/SD), or the D2 (NAND/SD).


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18960 a1c6a512-1295-4272-9138-f99709370657
 2008-11-01 16:14:28 +00:00
Frank Gevaerts
19d1cacb1a cleanup storage defines 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18950 a1c6a512-1295-4272-9138-f99709370657
 2008-10-31 21:25:04 +00:00
Rafaël Carré
e1b4838481 Embryo of a SD driver for Sansav2 
Debug code included, needed until the bootloader is ready

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18926 a1c6a512-1295-4272-9138-f99709370657
 2008-10-29 20:21:59 +00:00
Dave Chapman
8df1a7e29a e200v2: implement the backlight handling (copy/paste from the c200v1/e200v1 code - this should probably be unified, along with other upcoming v2 code), plus clean up the lcd init by calling lcd_init() directly in the bootloader, instead of lcd_init_device(). 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18910 a1c6a512-1295-4272-9138-f99709370657
 2008-10-29 01:42:03 +00:00
Rafaël Carré
b3ee07c22e Sansav2 : initializes SDRAM 
The AS3525 SoC ships with an ARM PL172 MPMC controller
Also correct the memory sizes in tools/configure

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18899 a1c6a512-1295-4272-9138-f99709370657
 2008-10-28 11:24:29 +00:00
Bertrik Sikken
95726a5c23 FS#9503 - Sansa v2 audio/PMU communication driver (for the AS3525 SoC) 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18886 a1c6a512-1295-4272-9138-f99709370657
 2008-10-26 13:28:52 +00:00
Frank Gevaerts
4f81a54829 Add c200 erase tools. The resulting .bin files can be run from e200tool 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18854 a1c6a512-1295-4272-9138-f99709370657
 2008-10-21 18:57:11 +00:00
Dave Chapman
08c41d42bb Add e200v2 and m200v2 targets. Move the telechips lcd-ssd1815.c (currently used by Logik DAX and m200v1 ports) driver up in the target tree and share with the m200v2 - as2525 parts contributed by Rafael Carre. Includes the start (but is still very incomplete) of an LCD driver for the e200v2. m200v2 is not yet fully supported by mkamsboot - that will come soon. Also some minor cleanups for the Clip. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18836 a1c6a512-1295-4272-9138-f99709370657
 2008-10-19 14:11:01 +00:00
Frank Gevaerts
49ec9ea190 Make the meizu m3 load from flash, so interrupts work. More work is needed to get the m6sl "working" again 
(patch by Denes Balatoni, FS#9499)


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18827 a1c6a512-1295-4272-9138-f99709370657
 2008-10-18 22:28:59 +00:00
Vitja Makarov
91b9c6139b telechips usb: not ready for use but, something is working, needs improvement. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18806 a1c6a512-1295-4272-9138-f99709370657
 2008-10-14 05:13:21 +00:00
Dave Chapman
5134612ca9 Remove usage of snprintf and strlen and instead calculate things at compile-time. Also swap the positions of the version text and logo for the Clip so we don't get a multi-coloured logo 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18793 a1c6a512-1295-4272-9138-f99709370657
 2008-10-12 22:35:03 +00:00
Frank Gevaerts
2cc85bc346 Fix LCD timings on the older meizu M3 variant, so it works with a fast clock. 
(FS#9484, by Denes Balatoni)



git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18784 a1c6a512-1295-4272-9138-f99709370657
 2008-10-12 16:55:57 +00:00
Dave Chapman
da8bff107e Commit FS#9467 - initial work on port to Sansa Clip by Rafaël Carré and François Dinel. A few cosmetic changes were made by me prior to committing: 1) TAB policing in button-clip.c; 2) Add François Dinel to CREDITS; 3) Add François Dinel as (C) holder in button-target.h (it was previously blank); 4) Add Rockbox header to bootloader/sansa_as3525.c with Rafaël Carré as (C) holder; 5) Change target_id to 50 (next available number) in tools/configure and fixed indentation; 6) Change MODEL_NUMBER in config-clip.h to 50 (next available number); 7) Remove unused in/out macros from system-target.h 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18782 a1c6a512-1295-4272-9138-f99709370657
 2008-10-12 16:46:01 +00:00
Frank Gevaerts
68d9fb95de lcd now shows things on the old-style Meizu M3. 
It needs to be re-tested on the new-style, colours are wrong, and timing loops need to be reviewed



git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18740 a1c6a512-1295-4272-9138-f99709370657
 2008-10-07 21:12:03 +00:00
Frank Gevaerts
2d5e6e1a87 LCD driver for meizu M3, new type (older M3s are not yet supported) 
Thanks to Denes Balatoni


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18719 a1c6a512-1295-4272-9138-f99709370657
 2008-10-05 20:01:25 +00:00
Dave Chapman
85807cd44e Trivial changes to make the main Rockbox builds for the Sansa m200 and Logik DAX ports compile. Note that some codecs are currently disabled (due to lowmem on these targets), but that needs more work and analysis to decide how much RAM we want to allocate to codecs. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18566 a1c6a512-1295-4272-9138-f99709370657
 2008-09-22 19:15:18 +00:00
Marcoen Hirschberg
48e45f5751 add Meizu M6SP and M3 ports 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18544 a1c6a512-1295-4272-9138-f99709370657
 2008-09-17 23:22:11 +00:00
Maurus Cuelenaere
9407ae838e Onda VX747: 
* Button driver rework
 * Backlight driver rework
 * LCD driver rework


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18543 a1c6a512-1295-4272-9138-f99709370657
 2008-09-17 21:44:47 +00:00
Frank Gevaerts
c0e898ae29 Now reads the LCD controller ID succesfully and flashes it using the backlight 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18531 a1c6a512-1295-4272-9138-f99709370657
 2008-09-16 16:51:25 +00:00
Maurus Cuelenaere
1e294e3f25 Onda VX747: 
* Get rid of bug when interrupts are enabled
 * Get threading to work (although with some weirdness)
 * Other fixes/optimizations


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18512 a1c6a512-1295-4272-9138-f99709370657
 2008-09-14 16:26:08 +00:00
Frank Gevaerts
1898ff753f * move qt1106 specific things to their own files 
* use CHANGE pin


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18496 a1c6a512-1295-4272-9138-f99709370657
 2008-09-11 18:18:40 +00:00
Maurus Cuelenaere
1ff9ce202d Fix mrobe500 svn:* 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18482 a1c6a512-1295-4272-9138-f99709370657
 2008-09-10 19:35:15 +00:00
Frank Gevaerts
3637ef9b32 First reading out of the touchpad! 
disabled power handling for now, so the device will power off when unplugged again (because there is no other poweroff method provided)


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18480 a1c6a512-1295-4272-9138-f99709370657
 2008-09-10 19:08:46 +00:00
Maurus Cuelenaere
23fc923bde ZVM: 
* Optimize MiniFS handling
 * Add basic CFS handling (doesn't work yet)
 * Remove hacky stuff in disk.c


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18438 a1c6a512-1295-4272-9138-f99709370657
 2008-09-07 17:24:14 +00:00
Dave Chapman
d462a64a91 Initial commit of iaudio 7 port by Vitja Makarov (FS#9245). Port is at quite an advanced stage, but is troubled by the lack of a reliable NAND driver (similar to the Cowon D2 port) and is not yet suitable for non-developers. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18435 a1c6a512-1295-4272-9138-f99709370657
 2008-09-06 17:50:59 +00:00
Maurus Cuelenaere
e144638167 Add Onda VX767 target 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18422 a1c6a512-1295-4272-9138-f99709370657
 2008-09-05 15:09:40 +00:00
Maurus Cuelenaere
5420c3f672 Share bootloader with Creative ZVM 30GB/60GB and Creative ZV 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18415 a1c6a512-1295-4272-9138-f99709370657
 2008-09-04 19:53:16 +00:00
Frank Gevaerts
e278b4fddb Turn off automatically after a number of backlight toggles. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18387 a1c6a512-1295-4272-9138-f99709370657
 2008-09-02 20:19:58 +00:00
Maurus Cuelenaere
78d44385fe Fix TABing 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18353 a1c6a512-1295-4272-9138-f99709370657
 2008-08-27 20:35:41 +00:00
Maurus Cuelenaere
944c33403c * Commit dual-boot support for Creative ZVx family 
* Add mkzenboot: makes it possible to integrate Rockbox bootloader with
   Creative firmwares without the need of distributing binaries
 * Add Tadeusz Pyś to credits, who figured out the minifs file system
 * Fix bootloader


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18352 a1c6a512-1295-4272-9138-f99709370657
 2008-08-27 20:32:12 +00:00
Maurus Cuelenaere
62c4a2838e Onda VX747: 
* Overall cleanup (still needs work)
  * Add preliminary USB support
  * Add power off support
  * Add preliminary MMU handling


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18348 a1c6a512-1295-4272-9138-f99709370657
 2008-08-26 21:48:49 +00:00
Maurus Cuelenaere
1392dc2144 Commit FS#9308: differentiate between TOUCHPAD & TOUCHSCREEN 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18338 a1c6a512-1295-4272-9138-f99709370657
 2008-08-23 09:46:38 +00:00
Maurus Cuelenaere
4bf4d2bb55 * Get interrupts working (but crashes after 10-30secs) 
* Make current_tick increase
* Convert button driver into SADC driver
* Make touchscreen handling work better (still needs good calibration routine)


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18240 a1c6a512-1295-4272-9138-f99709370657
 2008-08-10 21:44:48 +00:00
Maurus Cuelenaere
447ffc8bf8 * Add interrupt handling (but still not working) 
* Clean up linker script and bootup routines


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18229 a1c6a512-1295-4272-9138-f99709370657
 2008-08-09 23:31:38 +00:00
Barry Wardell
1ac260c0e6 Fix H10 bootloader locking up if the scroll pad was touched. May also fix any other lock ups from trying to read from the adc in the bootloader. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18208 a1c6a512-1295-4272-9138-f99709370657
 2008-08-07 11:23:40 +00:00
Maurus Cuelenaere
88ae9024e4 * Add basic (non-working) support for NAND flash 
* Add panicf() handling
* Add not-yet-enabled dma acceleration
* Other (minor) fixes


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18203 a1c6a512-1295-4272-9138-f99709370657
 2008-08-06 20:39:02 +00:00
Maurus Cuelenaere
06e3c660cc Prepare Creative bootloader compilation for future dual boot integration 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18187 a1c6a512-1295-4272-9138-f99709370657
 2008-08-03 19:32:14 +00:00
Maurus Cuelenaere
06efd071a9 Updated bootloader containing more debug information 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18151 a1c6a512-1295-4272-9138-f99709370657
 2008-07-30 10:24:39 +00:00
Maurus Cuelenaere
1f692e5f55 1) Set svn:keywords where they should've been set 
2) Onda VX747 specific changes


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18080 a1c6a512-1295-4272-9138-f99709370657
 2008-07-17 10:13:56 +00:00
Maurus Cuelenaere
975261f003 Fix the LCD bug! 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18071 a1c6a512-1295-4272-9138-f99709370657
 2008-07-16 15:25:35 +00:00
Maurus Cuelenaere
ea9d107320 Forgot a file.. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18053 a1c6a512-1295-4272-9138-f99709370657
 2008-07-15 17:20:07 +00:00
Maurus Cuelenaere
e6248f2e5d Remove svn:executable 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18033 a1c6a512-1295-4272-9138-f99709370657
 2008-07-14 15:09:22 +00:00
Maurus Cuelenaere
0709f0a5c6 Add preliminary support for the Onda VX747 (MIPS target) 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18032 a1c6a512-1295-4272-9138-f99709370657
 2008-07-14 15:03:10 +00:00
Marc Guay
f6cde72ce9 Fix a few dead references in the manual and add an 's' where one was missing. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17972 a1c6a512-1295-4272-9138-f99709370657
 2008-07-06 21:32:59 +00:00
Jens Arnold
b1e16d2161 Repair charging screen on archos. usb_detect() doesn't return a boolean since 2007-09-04. Fixed same problem in the m:robe 500 bootloader and in bootbox. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17955 a1c6a512-1295-4272-9138-f99709370657
 2008-07-06 12:14:13 +00:00
Daniel Stenberg
2acc0ac542 Updated our source code header to explicitly mention that we are GPL v2 or 
later. We still need to hunt down snippets used that are not. 1324 modified
files...
http://www.rockbox.org/mail/archive/rockbox-dev-archive-2008-06/0060.shtml


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17847 a1c6a512-1295-4272-9138-f99709370657
 2008-06-28 18:10:04 +00:00
Marcoen Hirschberg
7b10ef9a7c initial Meizu M6SL port (take 2) 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17819 a1c6a512-1295-4272-9138-f99709370657
 2008-06-27 23:24:34 +00:00
Mark Arigo
22e7bf32b8 My Devcon 2008 contribution: port for Philips GoGear HDD1630 (PP5022-based). Current status is that the bootloader works to load Rockbox, but dual boot does not work: it freezes after decrypting the OF. When Rockbox boots, it freezes somewhere between showing the logo and the main menu. And there's no driver for the touchpad. So lots of work left. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17809 a1c6a512-1295-4272-9138-f99709370657
 2008-06-27 18:40:25 +00:00
Marc Guay
b93667b306 Add the Sansa c100 as a build target with basic drivers. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17742 a1c6a512-1295-4272-9138-f99709370657
 2008-06-21 15:18:36 +00:00
Mark Arigo
badb6dae62 Add mi4 key for the Philips GoGear HDD1630 (PP5022-based) 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17660 a1c6a512-1295-4272-9138-f99709370657
 2008-05-30 04:14:23 +00:00
Mark Arigo
b4275d4941 Philips GoGear SA9200 port. Working bootloader and normal builds, including sound. No touchpad now, buttons limited to using vol+/vol-/power for up/down/select. Rockbox USB is enabled since the OF is MTP only...read the warnings on the PortalPlayerUsb wiki page. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17591 a1c6a512-1295-4272-9138-f99709370657
 2008-05-21 03:55:17 +00:00
Barry Wardell
63f4f68a74 Don't need this any more since it's the default now. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17457 a1c6a512-1295-4272-9138-f99709370657
 2008-05-11 15:30:15 +00:00
Michael Sevakis
80278e45aa Bring Gigabeat S bootloader one step close to a release version. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17442 a1c6a512-1295-4272-9138-f99709370657
 2008-05-10 18:00:11 +00:00
Michael Sevakis
c41cacaf30 Do some gigabeat S bootloader cleanup (includes, const, static-ing, number of variables, etc.). Make sure a tar file isn't too big before loading it however unlikely that is. No overall functional change but bump to v.00000013 for tracking purposes. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17403 a1c6a512-1295-4272-9138-f99709370657
 2008-05-07 07:14:39 +00:00
Michael Sevakis
0218397cf4 Gigabeat S bootloader: 1) Switch order of .vectors to be contiguous with initialized sections. 2) Clean all caches in main before doing anything else because vector copying counts as self-modifying code. Up to v.00000012. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17381 a1c6a512-1295-4272-9138-f99709370657
 2008-05-05 13:30:29 +00:00
Barry Wardell
536d2feedb Oops. Forgot to svn add this. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17375 a1c6a512-1295-4272-9138-f99709370657
 2008-05-05 12:12:55 +00:00
Barry Wardell
940091ae38 FS#7977: Bootloader logo for PP-based targets (H10, Sansa, M-Robe 100). 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17374 a1c6a512-1295-4272-9138-f99709370657
 2008-05-05 12:05:00 +00:00
Michael Sevakis
75fe8875bc Fix firmware load error display and handling in Gigabeat S bootloader. Remove "Hello World". v.00000011 now. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17347 a1c6a512-1295-4272-9138-f99709370657
 2008-05-04 03:44:49 +00:00
Dave Chapman
f2042983f0 Add the Sansa M200 (v1) as a target - it's extremely similar to the Logik DAX (the LCD driver worked unchanged). Plus various tcc77x work, including a working tick interrupt (enabled in the bootloader). Rockbox itself builds for the M200 (there are no keymaps yet for the DAX), but doesn't progress very far due to the lack of an ATA (NAND flash) driver. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17306 a1c6a512-1295-4272-9138-f99709370657
 2008-05-02 19:12:09 +00:00
Jens Arnold
2bbacf89fe Make sure the linker considers crt0*.o before all files specified on the command line by using STARTUP() instead of INPUT() in the .lds. Using INPUT() makes the linker process crt0*.o after all files specified on the command line, making linking fail if there are librockbox.a members which are only referenced by crt0*.o. Remove the hackaround that was needed for building the gigabeat S bootloader before (aka UIE() problem). 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17289 a1c6a512-1295-4272-9138-f99709370657
 2008-04-29 06:19:32 +00:00
Rob Purchase
18b004b330 Enable 'touchscreen areas' on the D2, based on JdGordon's m:robe code. Disable the bootloader debug screen, as that stuff is all available from the Debug menu now. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17257 a1c6a512-1295-4272-9138-f99709370657
 2008-04-27 13:30:11 +00:00
Karl Kurbjun
7510335fc4 This is a big chunk of code necessary to prepare for Gigabeat F flash loading and and implementation of rolo. There should be no noticible changes for the user. A new bootloader is not needed. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17213 a1c6a512-1295-4272-9138-f99709370657
 2008-04-22 04:34:25 +00:00
Michael Sevakis
8ec1dca0da Enable program flow prediction in the system control coprocessor setup in the bootloader. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17211 a1c6a512-1295-4272-9138-f99709370657
 2008-04-21 21:45:58 +00:00
Michael Sevakis
2920359cca Unreverse Gigabeat S bootloader. Boot Rockbox with hold switch off. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17203 a1c6a512-1295-4272-9138-f99709370657
 2008-04-21 04:34:39 +00:00
Michael Sevakis
9003dbe5b2 Make the inital connect problem go away on Gigabeat S. Would be nice if a better way were found but it works for me. Update the bootloader to have it work. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17181 a1c6a512-1295-4272-9138-f99709370657
 2008-04-20 03:30:57 +00:00
Michael Sevakis
94f7d0f290 UMS for the Gigabeat S. Bootloader USB mode. Has a couple quirks 1) First plug has problems if cold. Replug if it doesn't connect or not at high speed 2) Linux doesn't like the odd bootable flag value used in the partitions so it won't mount but Windows works. Fix minor OTG driver bugs and clean up device memory handling. Generic name for ARC controller driver. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17154 a1c6a512-1295-4272-9138-f99709370657
 2008-04-18 16:42:50 +00:00
Nicolas Pennequin
90a3d58013 Gigabeat S bootloader: Improve untarring by reading the whole file to memory before starting to write the output files. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17136 a1c6a512-1295-4272-9138-f99709370657
 2008-04-16 00:38:06 +00:00
Nicolas Pennequin
620e6b4d93 Gigabeat S bootloader: make it move a rockbox binary back to /.rockbox/ when it finds one in the MTP directory. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17133 a1c6a512-1295-4272-9138-f99709370657
 2008-04-15 23:17:03 +00:00
Jonathan Gordon
5b5a626bb6 Setup the touchpads to have two modes - stylus and button - and set them in button mode by default. 
in button mode the touchpad is split into a 3x3 grid for 9 seperate buttons which can be used by the action system like real buttons.
Unify the keymap file for the touchpads in button mode. the target keymap file only needs to worry about real buttons.
(As these ports mature each screen will need to be fixed seperatly to be able to use stylus mode (the lists can already but don't change mode just yet.)


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17114 a1c6a512-1295-4272-9138-f99709370657
 2008-04-15 10:35:11 +00:00
Daniel Stenberg
7387a0470e sync with key list with mi4code and add the single mi4 key it had but this 
still didn't


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17077 a1c6a512-1295-4272-9138-f99709370657
 2008-04-11 21:11:55 +00:00
Mark Arigo
f46a7533a4 mi4 key for the Philips GoGear SA9200 (PP5024). Let the fun begin... 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17069 a1c6a512-1295-4272-9138-f99709370657
 2008-04-11 03:57:16 +00:00
Rob Purchase
f4deea6027 D2: Update dual boot to use the hold switch. Update bootloader to show messages until HOLD released, keep holding POWER to show old debug screen (these modes will eventually be removed). 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17032 a1c6a512-1295-4272-9138-f99709370657
 2008-04-08 08:01:18 +00:00
Jens Arnold
02580851ad Revert... stupid svn doesn't complain when passing -m twice :( 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16939 a1c6a512-1295-4272-9138-f99709370657
 2008-04-02 22:45:23 +00:00
Jens Arnold
01a106dbfa Make the measured LCD scanrates from the greylib known to the scanrate test plugin. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16938 a1c6a512-1295-4272-9138-f99709370657
 2008-04-02 22:42:21 +00:00
Michael Sevakis
ec05b66b5d That was stupid. Should be enable_interrupt. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16898 a1c6a512-1295-4272-9138-f99709370657
 2008-03-31 06:05:16 +00:00
Michael Sevakis
75f2d441e9 Change the remaining set_interrupt_status usage to the more parsimonious disable/enable/restore. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16897 a1c6a512-1295-4272-9138-f99709370657
 2008-03-31 06:00:23 +00:00
Rob Purchase
3b46671a40 Make the Telechips bootloader slightly less messy, kill some warnings and allow entry to the bootloader debug screen via the D2's hold switch. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16879 a1c6a512-1295-4272-9138-f99709370657
 2008-03-29 17:26:16 +00:00
Marcoen Hirschberg
82c52302bd split boot.lds and move it into the target tree 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16855 a1c6a512-1295-4272-9138-f99709370657
 2008-03-27 23:58:03 +00:00
Marcoen Hirschberg
b2ec13d8f1 Revert "initial Meizu M6SL port" 
This reverts commit b7bd17ce1715c3a8acbf74a63694c28b6075da5b.


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16846 a1c6a512-1295-4272-9138-f99709370657
 2008-03-27 11:53:51 +00:00
Marcoen Hirschberg
c7e5d78241 initial Meizu M6SL port 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16844 a1c6a512-1295-4272-9138-f99709370657
 2008-03-27 11:29:24 +00:00
Dave Chapman
f0cde2dff9 Don't make the Sansa bootloaders verbose when USB is connected 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16836 a1c6a512-1295-4272-9138-f99709370657
 2008-03-27 00:31:51 +00:00
Daniel Stenberg
08cabe9169 kill the release script and build tarball from *everything* in SVN... 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16818 a1c6a512-1295-4272-9138-f99709370657
 2008-03-26 13:12:07 +00:00
Michael Sevakis
af395f4db6 Do core interrupt masking in a less general fashion and save some instructions to decrease size and speed things up a little bit. Small fix to a few places where interrupts would get enabled again where they shouldn't have been (context switching calls when disabled). 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16811 a1c6a512-1295-4272-9138-f99709370657
 2008-03-26 01:50:41 +00:00
Jens Arnold
1f4bcc86da Revert accidental tree commit. /me needs a smaller enter key... 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16805 a1c6a512-1295-4272-9138-f99709370657
 2008-03-25 19:57:23 +00:00
Jens Arnold
9a7978aeab Cabbiev2 gigabeat background: reduce WPS backdrop filesize by storing it as 24 bit BMP instead of unnecessary 32 bit. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16802 a1c6a512-1295-4272-9138-f99709370657
 2008-03-25 19:43:08 +00:00
Rob Purchase
4dc2d8ddba Enable tick IRQs on TCC780x. The main menu is now working on the D2. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16749 a1c6a512-1295-4272-9138-f99709370657
 2008-03-22 19:41:51 +00:00
Jens Arnold
d700970f86 Cosmetic fixes for the iAudio bootloader: Don't display 'Hold switch on' if the reason for getting there was a spurious ON event. Don't disable the multi-colour LED in the M3 bootloader. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16690 a1c6a512-1295-4272-9138-f99709370657
 2008-03-18 00:17:21 +00:00
Jens Arnold
ed3ff1b0b5 Various coldfire fixes: (1) iAudio Bootloader: Check the status of main & remote power button vs. the respective hold switch, and shut down when on hold. On X5/M5 this check is not strictly necessary for the main unit, but left there to keep things uniform. (2) M3: Stop reading the ADC properly before leaving the bootloader, on RoLo, and on reboot, to make it work reliably after those transitions. (3) Disable all interrupt sources on system init to avoid premature ISR calls after enabling interrupts in general. (4) iAudios: Proper implementation of ide_powered(), avoiding nasty HDD clicks in the bootloader when powering down, e.g. because of Hold. (5) Slight optimisations. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16689 a1c6a512-1295-4272-9138-f99709370657
 2008-03-17 23:47:38 +00:00
Jens Arnold
80ded2ad7c Really fix low-bat detection in the iAudio bootloader. * Improve naming of iriver and iaudio bootloader files. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16649 a1c6a512-1295-4272-9138-f99709370657
 2008-03-12 23:19:44 +00:00
Rob Purchase
c8836112c6 Cowon D2: Make the bootloader functional (usage instructions to appear on the CowonD2Info wikipage shortly). Also re-enable IRAM by reducing Tremor's ICODE usage. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16646 a1c6a512-1295-4272-9138-f99709370657
 2008-03-12 20:57:19 +00:00
Jens Arnold
769fcbd4d9 More iAudio M3 work. Bootloader compiles, but doesn't work yet. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16645 a1c6a512-1295-4272-9138-f99709370657
 2008-03-12 20:35:42 +00:00
Rob Purchase
562b9de7cb D2: Make lcd_init_device() actually turn on the LCD, in preparation for booting the main image. Previously this required an explicit lcd_enable(true). 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16523 a1c6a512-1295-4272-9138-f99709370657
 2008-03-05 00:21:56 +00:00
Robert Kukla
6ef63a5373 m:robe 100: use power button for dual-booting the OF (short press to boot rockbox, long press for OF) 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16522 a1c6a512-1295-4272-9138-f99709370657
 2008-03-05 00:17:21 +00:00
Nicolas Pennequin
e2f5f21e5b Give the Gigabeat S bootloader the ability to untar a tarball. 
To test a build, use 'make tar' and send the tar to the unit. The bootloader will unarchive it and delete it before loading the main binary.
This is a temporary hack to make testing possible until we have a better way of sending a complete build.
Also enable writing to the disk by disabling the optimised write stubs.


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16338 a1c6a512-1295-4272-9138-f99709370657
 2008-02-17 23:17:08 +00:00
Christian Gmeiner
868fcce96c Shutdown needs about 2 seconds, but it seems to work :) 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16317 a1c6a512-1295-4272-9138-f99709370657
 2008-02-16 12:44:15 +00:00
Rob Purchase
addb5228ec D2: Further work-in-progress on the NAND driver. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16308 a1c6a512-1295-4272-9138-f99709370657
 2008-02-13 23:50:44 +00:00
Björn Stenberg
2f7cffa204 Major USB fixes by Frank Gevaerts. Still disabled in builds, #define USE_ROCKBOX_USB to test. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16279 a1c6a512-1295-4272-9138-f99709370657
 2008-02-11 14:26:25 +00:00
Miika Pekkarinen
698113d9db Prepare for a new bootloader 7-pre4 release for iriver H100 series. Synced to work properly with SVN, and hopefully fixed remote detection problem and audio thump for some users. Also pure H100/H115 should be supported now. Actual bootloaders will be released separately. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16252 a1c6a512-1295-4272-9138-f99709370657
 2008-02-09 15:06:09 +00:00
Michael Sevakis
a07c034de7 Gigabeat S: Interrupt enabled bootloader. Miscellaneous integration changes. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16243 a1c6a512-1295-4272-9138-f99709370657
 2008-02-08 02:20:05 +00:00
Michael Sevakis
1f021af60c Gigabeat S mixer: Make some progress. Get the tick and core sleep working using the AVIC. Redo the startup code to remap from IRAM and not include the lcd driver frambuffer in the remapping (until it can be moved). Clean up LCD driver. For other misc. changes, see the diffs. Now it progresses to ATA init and fails with -11 but without crashing or hanging. Replace all bootloaders. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16216 a1c6a512-1295-4272-9138-f99709370657
 2008-02-05 04:43:19 +00:00
Rob Purchase
5991478628 Read ID codes & raw page data from D2 NAND flash (work in progress; 
no logical->physical address translation yet)


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16167 a1c6a512-1295-4272-9138-f99709370657
 2008-01-25 21:37:59 +00:00
Rob Purchase
47ea030e2e Initial Cowon D2 commit: 
* bootloader test program (basic LCD & button drivers, reads touchscreen)
* work-in-progress stubs for main build


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16090 a1c6a512-1295-4272-9138-f99709370657
 2008-01-14 22:04:48 +00:00
Mark Arigo
e66ddd754f Initial commit for the Olympus m:robe 100 port (PP5020). The LCD driver works. The ADC driver was copied from the H10 port (they can probably be combined later), but the battery readings aren't right and it shuts down. The touch pad buttons do not work. Install the bootloader and rockbox the H10 way. Still lots of work to do. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16030 a1c6a512-1295-4272-9138-f99709370657
 2008-01-09 07:24:43 +00:00
Will Robertson
32f6109fb1 Gigabeat S memory management stuff. 
* Moved crt0.S to imx31 subdirectory, as it was the last target using the unified file.
* DRAM is now remapped to 0x0, facilitating interrupts (which aren't done yet)


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15965 a1c6a512-1295-4272-9138-f99709370657
 2007-12-23 12:19:40 +00:00
Nicolas Pennequin
c2ca8c710c * Make the Gigabeat S bootloader a bit more interesting: it looks for the first firmware file it finds on the second partition and attempts to load it. Loading fails to get past the splash screen though. 
* Make the main binary compile.
To send a firmware file, use mtp-sendfile. To update you'll need to delete the previous firmware file, as files are named sequentially and the first one is loaded.


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15836 a1c6a512-1295-4272-9138-f99709370657
 2007-11-27 15:40:29 +00:00
Björn Stenberg
7af22e1a86 Red fix: USB power check implemented in driver instead 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15761 a1c6a512-1295-4272-9138-f99709370657
 2007-11-22 22:17:45 +00:00
Jens Arnold
afd5174eaf Fix iPod Nano & Video bootloaders. Backlight uses sleep(), hence it must be initialised after kernel_init(). 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15743 a1c6a512-1295-4272-9138-f99709370657
 2007-11-21 21:28:46 +00:00
Christian Gmeiner
21ac3110f1 * dont compile audio codec drivers for bootloader, as we dont need them -> saves time 
* dont include uda1380 in bootloaders
* fix to get rid of a nasty humming sound during is not uda1380 specific but iriver
  specific and so put the fix into the bootloader. An other option was to 
  put audiohw_reset() into target tree... but i want to get rid of audiohw_reset


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15721 a1c6a512-1295-4272-9138-f99709370657
 2007-11-20 12:09:59 +00:00
Jonathan Gordon
fc8e09d79d shutdown if hold is on in the non-ipod-pp target bootloaders. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15679 a1c6a512-1295-4272-9138-f99709370657
 2007-11-19 02:07:40 +00:00
Jens Arnold
ef12b3b5c6 Hardware controlled backlight brightness for iPod Video and Nano, retaining the software PWM fade in/ fade out. * Backlight handling cleanup, getting rid of one layer of 'lowlevelness'. * Use atomic GPIO bit manipulation for PP502x backlight handling. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15599 a1c6a512-1295-4272-9138-f99709370657
 2007-11-12 18:49:53 +00:00
Karl Kurbjun
59a2862347 Show some more registers in the debug screen, fix the touchscreen when SCREEN_ROTATE is set. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15566 a1c6a512-1295-4272-9138-f99709370657
 2007-11-11 03:31:24 +00:00
Dave Chapman
eaed78555b Swap two messages which were the wrong way round. Thanks to Barry Wardell for spotting. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15549 a1c6a512-1295-4272-9138-f99709370657
 2007-11-09 08:37:14 +00:00
Dave Chapman
82a1f8e514 Add check for e200 bootloaders and also for an already-patched e200r bootloader, so we can display more useful messages to the user, instead of simply "Unknown Bootloader". Also a bit of code cleaning and whitespace insertion. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15543 a1c6a512-1295-4272-9138-f99709370657
 2007-11-08 20:37:16 +00:00
Karl Kurbjun
5db6b51759 Get the user timer working properly consequentially fixing doom without a hack. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15510 a1c6a512-1295-4272-9138-f99709370657
 2007-11-07 05:30:31 +00:00
Catalin Patulea
f57ea9acd7 m:robe 500i port: Add backlight support to the main build. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15404 a1c6a512-1295-4272-9138-f99709370657
 2007-11-02 06:13:43 +00:00
Catalin Patulea
574b1009a6 m:robe 500i port: Add support for the backlight client in the SPI subsystem 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15402 a1c6a512-1295-4272-9138-f99709370657
 2007-11-02 05:07:52 +00:00
Dave Chapman
a4d48d0c0d Button driver for Logik DAX, plus some changes to the debug info displayed in the bootloader build. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15396 a1c6a512-1295-4272-9138-f99709370657
 2007-11-01 23:38:57 +00:00
Dave Chapman
28f6ae49ec Initial work on a port to the Logik DAX 1GB MP3/DAB player. The bootloader build compiles and runs (but only displays some debugging info), and the LCD and ADC drivers are working. Two different bootloader builds are possible: 1) The default build is just a test application for uploading to the device via tcctool; 2) Adding -DTCCBOOT to EXTRA_DEFINES in the build directory Makefile will compile the bootloader so that it can be appended to the end of the original firmware and installed on the device, dual-booting. This commit also includes some work by Hein-Pieter van Braam on a port to the iAudio 7, but that doesn't build yet. A large part of these ports will be generic to all TCC77x devices - see the TelechipsInfo wiki page for some other devices with this CPU. NOTE: Compiling these builds requires an arm-elf-gcc with armv5 support - the current version of rockboxdev.sh compiles such a gcc. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15339 a1c6a512-1295-4272-9138-f99709370657
 2007-10-28 11:08:10 +00:00
Karl Kurbjun
0a632680e9 Some small cleanups and code for testing 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15312 a1c6a512-1295-4272-9138-f99709370657
 2007-10-26 05:17:15 +00:00
Karl Kurbjun
5a9a2b7bc4 Unify the Gigabeat F/X and M:Robe MMU code while enabling it for the M:Robe 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15275 a1c6a512-1295-4272-9138-f99709370657
 2007-10-23 03:29:15 +00:00
Jonathan Gordon
12d1ff912c touchpad driver for the mrobe. nothing in apps/ uses it yet. 
Changes to button driver: HAVE_BUTTON_DATA targets pass the button data straight back in the button_read_device() call


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15262 a1c6a512-1295-4272-9138-f99709370657
 2007-10-22 07:01:59 +00:00
Karl Kurbjun
fdbc01c6e2 More M:Robe work including a fix to lcd-as-memframe for larger screens thanks to Michael Sevakis. Also fixes simulator builds. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15254 a1c6a512-1295-4272-9138-f99709370657
 2007-10-21 23:12:17 +00:00
Barry Wardell
8b6bf8f734 Fix warning 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15226 a1c6a512-1295-4272-9138-f99709370657
 2007-10-20 18:30:41 +00:00
Barry Wardell
d46cf97024 Support database rebuild disabling when USB is connected for all e200 OF versions. Some people may have to update the OF (to any version they want) using sansapatcher before it will work. This just ensures that the NVPARAMS are in a good state and we can be sure where to look for the rebuild flag.The c200 OF doesn't reboot before rebuilding the database, so our trick won't ever work there. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15225 a1c6a512-1295-4272-9138-f99709370657
 2007-10-20 17:08:41 +00:00
Barry Wardell
003fc494c2 Make the firmware partition dump code compile again. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15223 a1c6a512-1295-4272-9138-f99709370657
 2007-10-20 15:41:44 +00:00
Jonathan Gordon
eee3745d70 Add 3 more OF datbase refresh locations for the e200 bootloader (FS#7990) 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15219 a1c6a512-1295-4272-9138-f99709370657
 2007-10-20 10:01:05 +00:00
Jonathan Gordon
61f1ab27ff init spi and uart in the main build 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15195 a1c6a512-1295-4272-9138-f99709370657
 2007-10-19 02:14:09 +00:00
Jonathan Gordon
d8667df357 slightly better touchpad driver. Still not brilliant, but the bootloader/debugger can follow a stylus with a cursor, so we can start work on getting apps/ working 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15187 a1c6a512-1295-4272-9138-f99709370657
 2007-10-18 12:15:56 +00:00
Karl Kurbjun
fa1a38e7ce Some changes to the UART/button driver - reduce the number of interrupts - more work is needed 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15180 a1c6a512-1295-4272-9138-f99709370657
 2007-10-18 05:14:10 +00:00
Karl Kurbjun
f6bc19158e Turns out you can boot the main build by copying apps/rockbox.bin to /rockbox.mrboot. Something is wrong with the rockbox bootloader, but at least now we can work with the main build. Added in a warning for the core_sleep function 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15162 a1c6a512-1295-4272-9138-f99709370657
 2007-10-17 05:19:20 +00:00
Barry Wardell
f1fead0c9b Turn on the backlight in the e200 booloader. This is necessary for when we replace the sansa bootloader altogether. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15109 a1c6a512-1295-4272-9138-f99709370657
 2007-10-14 18:20:23 +00:00
Jonathan Gordon
d777a367ad clean up the e200r installer app to make it more user friendly 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15104 a1c6a512-1295-4272-9138-f99709370657
 2007-10-14 11:16:20 +00:00
Karl Kurbjun
f96fc52f00 Cleanup more warnings on the M:Robe 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@15097 a1c6a512-1295-4272-9138-f99709370657
 2007-10-13 16:27:41 +00:00
Jonathan Gordon
274c2b8d69 touchpad calibration (very simple calibration screen is in mrobe500.c 
but will not actually be used in the bootloader once rockbox main is running)


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14937 a1c6a512-1295-4272-9138-f99709370657
 2007-10-01 07:52:39 +00:00
Karl Kurbjun
a56b65342f Move some more files around and get the main build compiling 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14919 a1c6a512-1295-4272-9138-f99709370657
 2007-09-30 16:29:21 +00:00
Jonathan Gordon
e108964ec0 IRQ driven touchpad driver, crude but working 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14914 a1c6a512-1295-4272-9138-f99709370657
 2007-09-30 11:15:14 +00:00
Jonathan Gordon
a5e788fe85 slow - but working - IRQ based uart/button driver. 
change some of the uart function names from CamelCase


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14908 a1c6a512-1295-4272-9138-f99709370657
 2007-09-30 08:18:46 +00:00
Karl Kurbjun
968ba0a277 More ATA work (that doesn't work) 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14848 a1c6a512-1295-4272-9138-f99709370657
 2007-09-25 01:44:57 +00:00
Karl Kurbjun
9ac9cc6024 Working DM320 interrupts, changed the way registers are accessed in spi and uart drivers. Uart might be broken with interrupts - buttons on remote don't seem to respond when interrupts are enabled. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14836 a1c6a512-1295-4272-9138-f99709370657
 2007-09-23 23:08:39 +00:00
Karl Kurbjun
67ef4500e3 More interupt/timer work 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14823 a1c6a512-1295-4272-9138-f99709370657
 2007-09-22 23:17:52 +00:00
Jonathan Gordon
d331d00a2d start of the tsc2100 driver. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14816 a1c6a512-1295-4272-9138-f99709370657
 2007-09-22 14:21:07 +00:00
Karl Kurbjun
4a42723c33 Seperate M:Robe crt0.S, fix the vector tables for the bootloader, and show touchscreen values on single line. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14814 a1c6a512-1295-4272-9138-f99709370657
 2007-09-22 06:04:14 +00:00
Will Robertson
590501cfe4 Merge the Gigabeat S branch back into trunk. Fingers crossed nothing breaks. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14805 a1c6a512-1295-4272-9138-f99709370657
 2007-09-21 15:51:53 +00:00
Catalin Patulea
8664a4d425 m:robe 500i port: Less warnings = good. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14799 a1c6a512-1295-4272-9138-f99709370657
 2007-09-21 09:09:59 +00:00
Catalin Patulea
c3126e0f3c m:robe 500i port: Add primitives for the SPI bus and start moving toward new-style register definitions. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14798 a1c6a512-1295-4272-9138-f99709370657
 2007-09-21 09:06:02 +00:00
Jonathan Gordon
d7c3d80258 (mr500) reset if power is pressed, not very nice, but im sick of using the remote to reset 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14780 a1c6a512-1295-4272-9138-f99709370657
 2007-09-20 14:16:25 +00:00
Björn Stenberg
ab7975b1c9 Sansa C200 bootloader works fine, no need to be verbose anymore 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14775 a1c6a512-1295-4272-9138-f99709370657
 2007-09-20 12:11:04 +00:00
Jonathan Gordon
300f64c99a uart driver (which the buttons need) and button test code in the bootloader 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14768 a1c6a512-1295-4272-9138-f99709370657
 2007-09-20 09:08:40 +00:00
Karl Kurbjun
7b97fe21c0 Beginning of an M:Robe 500i port. Currently only in the bootloader stage. Needs another piece of code to start the boot process - will be in the wiki. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14763 a1c6a512-1295-4272-9138-f99709370657
 2007-09-20 04:46:41 +00:00
Daniel Stenberg
98a39fb057 key added used for C200 A1.00.03 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14742 a1c6a512-1295-4272-9138-f99709370657
 2007-09-18 13:58:12 +00:00
Jens Arnold
c41470d33d 1st/2nd gen bootloader: * Don't be verbose by default anymore. * Don't enable the backlight, as it looks bad in a bright environment due to backlight inversion, and it needs a lot of power. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14678 a1c6a512-1295-4272-9138-f99709370657
 2007-09-12 22:21:03 +00:00
Jonathan Gordon
9db22efd1f Firmware "hacker" code for the e200r install so the full bootloader rom doesnt need to be written. 
Requires a custom version of e200tool which isnt available yet.


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14654 a1c6a512-1295-4272-9138-f99709370657
 2007-09-09 11:20:20 +00:00
Mark Arigo
dbc6b4e39a Sansa c200 port. Rockbox works with sound. Several features are disabled including some lcd options, FM radio, recording, and all plugins. Loading the OF from the Rockbox bootloader does not work. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14625 a1c6a512-1295-4272-9138-f99709370657
 2007-09-06 03:28:58 +00:00
Jonathan Gordon
95101c19f2 dont bother waiting for a usb connection if we arnt getting usb power (speeds up the e200 bootloader by about 1.25s) 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14601 a1c6a512-1295-4272-9138-f99709370657
 2007-09-04 08:14:47 +00:00
Dave Chapman
1672350378 FS #7691 - improved USB detection on PP devices. This patch modifies the target-tree function usb_detect() on all targets from bool to int, returning USB_INSERTED or USB_EXTRACTED instead of true or false. This was done to enable the PP usb_detect() to check for USB_POWER (either a connection to a USB wall charger, or the user holding "charge mode" button) and return that as a third value. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14600 a1c6a512-1295-4272-9138-f99709370657
 2007-09-04 08:03:07 +00:00
Daniel Stenberg
9b3be37f84 fix warning 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14598 a1c6a512-1295-4272-9138-f99709370657
 2007-09-03 21:26:39 +00:00
Daniel Stenberg
8701494630 added two keys, and made NUM_KEYS work without needing a fixed number 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14597 a1c6a512-1295-4272-9138-f99709370657
 2007-09-03 21:23:57 +00:00
Jens Arnold
0b7391e06b Fix more yellow. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14377 a1c6a512-1295-4272-9138-f99709370657
 2007-08-17 07:06:54 +00:00
Jens Arnold
839ffbff5f Fix yellow. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14376 a1c6a512-1295-4272-9138-f99709370657
 2007-08-17 06:59:05 +00:00
Jens Arnold
0fac492c3d First step of powermanagement rework: * Move target specific stuff into target tree, starting with battery voltage tables and voltage reading. (This revealed some incorrect percent_to_voltage_charging mappings). * Voltage reading on 1st gen ipods is now correct. * Clean up obsolete config #defines. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14375 a1c6a512-1295-4272-9138-f99709370657
 2007-08-17 06:45:18 +00:00
Michael Sevakis
0a1b2485f8 Get the last errors? 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14037 a1c6a512-1295-4272-9138-f99709370657
 2007-07-28 08:58:05 +00:00
Michael Sevakis
5832b59c85 Fix warnings and errors. Remove some added stuff that wasn't needed afterall. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14036 a1c6a512-1295-4272-9138-f99709370657
 2007-07-28 08:45:57 +00:00
Jens Arnold
90eacb2616 G1/G2 bootloader working (always in verbose mode for now). Corrected fatal error help text for G1..G3. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@14020 a1c6a512-1295-4272-9138-f99709370657
 2007-07-27 07:32:55 +00:00
Dave Chapman
ebc076bc15 Remove the hack which read the ipod hardware revision from flash in the bootloader and passed it to Rockbox via a fixed address in SDRAM. Rockbox now remaps flash and so can just read the value itself. Also clean up the debug menu a little - only display the hw revision for ipods, and add the lcd_type variable to indicate the type of LCD (0 or 1) for ipod Color/Photo. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13986 a1c6a512-1295-4272-9138-f99709370657
 2007-07-25 13:12:38 +00:00
Michael Sevakis
1167e3c72f Accept FS#7134 - Sansa: external sd card support by Antonius Hellmann with some tweaks. All testers have given the green light. (Now for the RED ?? ;). 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13741 a1c6a512-1295-4272-9138-f99709370657
 2007-06-30 02:08:27 +00:00
Steve Bavin
0e16bd3cc9 Fix bootloader error reporting as per patch FS#7314. Thanks again to James Teh. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13662 a1c6a512-1295-4272-9138-f99709370657
 2007-06-18 06:52:29 +00:00
Barry Wardell
54c73a24b6 Bring back rolo for mi4-based targets (H10 and Sansa). 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13550 a1c6a512-1295-4272-9138-f99709370657
 2007-06-04 13:48:21 +00:00
Dave Chapman
c5302d5101 Clarify the need to hold MENU+SELECT to reboot an ipod 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13476 a1c6a512-1295-4272-9138-f99709370657
 2007-05-23 07:18:40 +00:00
Dave Chapman
7d79db2ab2 Ooops (about 3 months too late) - when an error is found by the bootloader, call lcd_update() so users can see it. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13468 a1c6a512-1295-4272-9138-f99709370657
 2007-05-22 19:05:14 +00:00
Jonathan Gordon
1062a17992 Add the database rebuild byte for the PP5022AF-05.51-S301-00.12-S301.00.12A-D OF version. 
Dont output the sector count so often when doing the partition dump.
CAUTION: don't upgrade to this bootloader as the buttons still are not working in the bootloader (USB will be the only access to the OF if you do)


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13438 a1c6a512-1295-4272-9138-f99709370657
 2007-05-20 03:08:00 +00:00
Jonathan Gordon
875c725e1c add some code to dump the sansa hidden partition (commented out), usefull for when we need to figure out which byte to modify so the OF doesnt rebuild its DB after usb 
CAUTION: Current svn bootloader cannot read buttons, so don't upgrade


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13402 a1c6a512-1295-4272-9138-f99709370657
 2007-05-17 11:35:57 +00:00
Karl Kurbjun
8a1fd8c686 Commit FS#6929 - Gigabeat bootloader improvements by Barry Wardell and myself. This build fixes the problems seen with the latest builds on the Gigabeat X. Added View IO Ports under the Debug menu for the Gigabeat. Make sure you grab the latest bootloader from the Wiki as the old bootloader will not work properly with new builds. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13225 a1c6a512-1295-4272-9138-f99709370657
 2007-04-21 04:48:20 +00:00
Dave Chapman
dbcd321813 Non-functional change - use the firmware __backlight_on() function instead of writing directly to the ports to turn the backlight on 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13128 a1c6a512-1295-4272-9138-f99709370657
 2007-04-12 17:58:02 +00:00
Jonathan Gordon
ceb1e7a2fe minor code cleanup and policing 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12889 a1c6a512-1295-4272-9138-f99709370657
 2007-03-22 12:55:51 +00:00
Jonathan Gordon
a76947f2a2 Enable usb detection in the sansa bootloader (loads OF if detected) 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12888 a1c6a512-1295-4272-9138-f99709370657
 2007-03-22 12:45:19 +00:00
Barry Wardell
7e03b0a2e0 Fix build errors. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12867 a1c6a512-1295-4272-9138-f99709370657
 2007-03-20 22:56:51 +00:00
Barry Wardell
7cd559dde0 Oops, the mi4 magic was being looked for in the wrong place when decrypting. Also decrease verbosity of PP bootloader a bit. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12865 a1c6a512-1295-4272-9138-f99709370657
 2007-03-20 22:18:35 +00:00
Barry Wardell
9a9aebb99e We should check the CRC32 whether it is encrypted or not. 
Do the encryption in-place so that it is faster. 
Add comment explaining why we need our own CRC32 implemenatation.


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12864 a1c6a512-1295-4272-9138-f99709370657
 2007-03-20 22:02:26 +00:00
Barry Wardell
3de41f5250 Add support for encrypted mi4 bootloaders. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12863 a1c6a512-1295-4272-9138-f99709370657
 2007-03-20 20:45:25 +00:00
Barry Wardell
bada0b7190 Hopefully fix CRC32 errors when loading the Sansa OF from the firmware partition. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12852 a1c6a512-1295-4272-9138-f99709370657
 2007-03-20 12:35:45 +00:00
Barry Wardell
0c1a304620 PP bootloader: 
1) Proper error handling when we can't find the firmware. 
2) Show verbose debug messages when any button is pressed.


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12847 a1c6a512-1295-4272-9138-f99709370657
 2007-03-20 10:36:26 +00:00
Barry Wardell
ca8f7bf352 The model and type strings are only 4 characters long. Also remove the 20 at the start of the version string - it should never have been there. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12839 a1c6a512-1295-4272-9138-f99709370657
 2007-03-19 11:20:22 +00:00
Barry Wardell
e293bbb451 If loading rockbox.mi4 fails, then drop back to trying rockbox.h10/rockbox.e200 instead. This will allow the new bootloader to be used with older rockbox builds. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12824 a1c6a512-1295-4272-9138-f99709370657
 2007-03-17 19:07:20 +00:00
Barry Wardell
b8a5adfcdb Partition type 0x84 is "OS/2 hidden C: drive" 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12805 a1c6a512-1295-4272-9138-f99709370657
 2007-03-16 14:41:55 +00:00
Barry Wardell
a91a35be74 The hidden partition stuff is only used Sansa. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@12803 a1c6a512-1295-4272-9138-f99709370657
 2007-03-16 14:36:14 +00:00