Nyaaori/rockbox
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
21908 commits 17 branches 142 tags 291 MiB
Commit graph

382 commits

Author SHA1 Message Date
Maurus Cuelenaere
ee1e8be37f Creative ZVM: 
* Re-enable USB
 * Acknowledge EP0SETUP packets
 * Spin disk down when no files get loaded in the bootloader
 * Clean up/fix some other stuff


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19931 a1c6a512-1295-4272-9138-f99709370657
 2009-02-05 21:47:54 +00:00
Mark Arigo
af5c4d1b27 Silence the m:robe 100 and HDD1630 bootloaders 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19908 a1c6a512-1295-4272-9138-f99709370657
 2009-02-03 04:10:49 +00:00
Michael Sevakis
47509fafa4 Fix up ZVM builds. It appeared to share common definitions with PP502x targets so use those. Remove one stale comment left behind in last commit. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19798 a1c6a512-1295-4272-9138-f99709370657
 2009-01-19 14:06:47 +00:00
Michael Sevakis
616c98b38f USB detection changes. c200/e200: Consider USB to be powered when charger is plugged but detect USB connection by bus reset. When received, disconnect and restart the driver fully enabled. imx31: Fix hack used to make initial connect succeeded-- set PHY type before initial reset. General: Move some target code out of usb-drv-arc.c and implement it in respective usb sources and CPU headers so things stay clean. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19797 a1c6a512-1295-4272-9138-f99709370657
 2009-01-19 13:41:25 +00:00
Mark Arigo
3482a55b83 Dual boot for the Philips HDD1630. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19741 a1c6a512-1295-4272-9138-f99709370657
 2009-01-10 03:21:07 +00:00
Michael Giacomelli
c97f640060 Commit FS#9679 by Thomas Martitz. Adds c200v2 to the target tree. Has some buttons defined, a bootloader, and stubs for most drivers. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19574 a1c6a512-1295-4272-9138-f99709370657
 2008-12-24 04:10:18 +00:00
Maurus Cuelenaere
9da2456c26 Fix SVN properties 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19482 a1c6a512-1295-4272-9138-f99709370657
 2008-12-19 11:29:18 +00:00
Maurus Cuelenaere
40ec543052 * Add support for Onda VX747+ (FS#9674 by Olivier Barbut) 
* Fix Onda VX767 support
 * Small cleanup


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19481 a1c6a512-1295-4272-9138-f99709370657
 2008-12-19 11:13:58 +00:00
Michael Sevakis
cb06108024 Meg-FX: Enable a real tick in the bootloader. Do cleanups before switching to firmware and cache handling. Put proper main return address in lr. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19368 a1c6a512-1295-4272-9138-f99709370657
 2008-12-08 23:31:05 +00:00
Michael Sevakis
bc963c34ae Hopefully mop-up remaining red. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19317 a1c6a512-1295-4272-9138-f99709370657
 2008-12-03 21:15:44 +00:00
Björn Stenberg
a091d20ba0 Added 'keywords' and 'eol-style' properties. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19218 a1c6a512-1295-4272-9138-f99709370657
 2008-11-25 19:54:23 +00:00
Rafaël Carré
2b39cb4b77 Sansa AMS bootloader: consider the bootloader finished 
Be verbose only if a keypress has been detected.
Use enable/disable_irq() instead of inline assembly

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19213 a1c6a512-1295-4272-9138-f99709370657
 2008-11-25 15:43:38 +00:00
Jonathan Gordon
76e662b8e5 fix the e200r installer so it compiles again (storage rework broke it) 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19195 a1c6a512-1295-4272-9138-f99709370657
 2008-11-24 04:43:31 +00:00
Björn Stenberg
b69be10d98 Use BOOTDIR and BOOTFILE defines instead of hardcoded path and file. FS#9559 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19190 a1c6a512-1295-4272-9138-f99709370657
 2008-11-23 22:07:48 +00:00
Frank Gevaerts
ac355de664 Don't print partition sizes in megabytes, as that is buggy on 5.5G. Use sectors instead 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19170 a1c6a512-1295-4272-9138-f99709370657
 2008-11-21 15:20:25 +00:00
Björn Stenberg
c6b3d38a15 New makefile solution: A single invocation of 'make' to build the entire tree. Fully controlled dependencies give faster and more correct recompiles. 
Many #include lines adjusted to conform to the new standards.


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19146 a1c6a512-1295-4272-9138-f99709370657
 2008-11-20 11:27:31 +00:00
Rob Purchase
9f0fbec999 Show the Rockbox logo in the Telechips bootloader. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19129 a1c6a512-1295-4272-9138-f99709370657
 2008-11-17 21:16:00 +00:00
Karl Kurbjun
f32336e4a5 Last commit for the flash bootloader. The bootloader build works properly either flashed or unflashed. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19098 a1c6a512-1295-4272-9138-f99709370657
 2008-11-12 05:11:18 +00:00
Karl Kurbjun
59d4d2025c Revert last commit (accidentally committed the whole tree) 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19095 a1c6a512-1295-4272-9138-f99709370657
 2008-11-12 04:15:34 +00:00
Karl Kurbjun
d42041043b Add in the needed crt0.S code for the wakeup alarm also 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19094 a1c6a512-1295-4272-9138-f99709370657
 2008-11-12 03:57:32 +00:00
Jonathan Gordon
ce505b8a01 the delay in the as3525 bootloader was driving me mad so remove it and get the bootloader closer to where a "finished" one should be (only show info if sometrhing needs to be shown, which is always for now.) 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19085 a1c6a512-1295-4272-9138-f99709370657
 2008-11-11 11:01:55 +00:00
Rafaël Carré
f7b1d806e6 Sansa AMS bootloader: use the correct (renamed) header file 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19075 a1c6a512-1295-4272-9138-f99709370657
 2008-11-10 20:36:02 +00:00
Bertrik Sikken
4ca4e523fe Rename functions as3525_codec_* to ascodec_* to prepare re-use of as3514 code for sansa v2 players 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19047 a1c6a512-1295-4272-9138-f99709370657
 2008-11-09 09:25:53 +00:00
Rafaël Carré
aef27e1f0c Sansav2 Bootloader 
Adds read-only SD driver, largely copied from ata-sd-pp.c
Only tested on the embedded SD, on the Clip
First steps to build a Normal firmware

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19045 a1c6a512-1295-4272-9138-f99709370657
 2008-11-09 06:17:21 +00:00
Rafaël Carré
6e645cc4eb AS3525: we won't use threads in the bootloader 
Disable tick_start()
Call kernel_init() _after_ system_init()

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19028 a1c6a512-1295-4272-9138-f99709370657
 2008-11-06 15:24:19 +00:00
Rafaël Carré
baecdb632c AS3525: use kernel_init() in bootloader 
This way creation of scrolling thread doesn't risk crashing the system

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19026 a1c6a512-1295-4272-9138-f99709370657
 2008-11-06 02:31:40 +00:00
Frank Gevaerts
86f0c75cde fix red 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18976 a1c6a512-1295-4272-9138-f99709370657
 2008-11-02 01:31:52 +00:00
Frank Gevaerts
2f8a0081c6 Apply FS#9500. This adds a storage_*() abstraction to replace ata_*(). To do that, it also introduces sd_*, nand_*, and mmc_*. 
This should be a good first step to allow multi-driver targets, like the Elio (ATA/SD), or the D2 (NAND/SD).


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18960 a1c6a512-1295-4272-9138-f99709370657
 2008-11-01 16:14:28 +00:00
Frank Gevaerts
19d1cacb1a cleanup storage defines 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18950 a1c6a512-1295-4272-9138-f99709370657
 2008-10-31 21:25:04 +00:00
Rafaël Carré
e1b4838481 Embryo of a SD driver for Sansav2 
Debug code included, needed until the bootloader is ready

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18926 a1c6a512-1295-4272-9138-f99709370657
 2008-10-29 20:21:59 +00:00
Dave Chapman
8df1a7e29a e200v2: implement the backlight handling (copy/paste from the c200v1/e200v1 code - this should probably be unified, along with other upcoming v2 code), plus clean up the lcd init by calling lcd_init() directly in the bootloader, instead of lcd_init_device(). 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18910 a1c6a512-1295-4272-9138-f99709370657
 2008-10-29 01:42:03 +00:00
Rafaël Carré
b3ee07c22e Sansav2 : initializes SDRAM 
The AS3525 SoC ships with an ARM PL172 MPMC controller
Also correct the memory sizes in tools/configure

git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18899 a1c6a512-1295-4272-9138-f99709370657
 2008-10-28 11:24:29 +00:00
Bertrik Sikken
95726a5c23 FS#9503 - Sansa v2 audio/PMU communication driver (for the AS3525 SoC) 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18886 a1c6a512-1295-4272-9138-f99709370657
 2008-10-26 13:28:52 +00:00
Frank Gevaerts
4f81a54829 Add c200 erase tools. The resulting .bin files can be run from e200tool 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18854 a1c6a512-1295-4272-9138-f99709370657
 2008-10-21 18:57:11 +00:00
Dave Chapman
08c41d42bb Add e200v2 and m200v2 targets. Move the telechips lcd-ssd1815.c (currently used by Logik DAX and m200v1 ports) driver up in the target tree and share with the m200v2 - as2525 parts contributed by Rafael Carre. Includes the start (but is still very incomplete) of an LCD driver for the e200v2. m200v2 is not yet fully supported by mkamsboot - that will come soon. Also some minor cleanups for the Clip. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18836 a1c6a512-1295-4272-9138-f99709370657
 2008-10-19 14:11:01 +00:00
Frank Gevaerts
49ec9ea190 Make the meizu m3 load from flash, so interrupts work. More work is needed to get the m6sl "working" again 
(patch by Denes Balatoni, FS#9499)


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18827 a1c6a512-1295-4272-9138-f99709370657
 2008-10-18 22:28:59 +00:00
Vitja Makarov
91b9c6139b telechips usb: not ready for use but, something is working, needs improvement. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18806 a1c6a512-1295-4272-9138-f99709370657
 2008-10-14 05:13:21 +00:00
Dave Chapman
5134612ca9 Remove usage of snprintf and strlen and instead calculate things at compile-time. Also swap the positions of the version text and logo for the Clip so we don't get a multi-coloured logo 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18793 a1c6a512-1295-4272-9138-f99709370657
 2008-10-12 22:35:03 +00:00
Frank Gevaerts
2cc85bc346 Fix LCD timings on the older meizu M3 variant, so it works with a fast clock. 
(FS#9484, by Denes Balatoni)



git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18784 a1c6a512-1295-4272-9138-f99709370657
 2008-10-12 16:55:57 +00:00
Dave Chapman
da8bff107e Commit FS#9467 - initial work on port to Sansa Clip by Rafaël Carré and François Dinel. A few cosmetic changes were made by me prior to committing: 1) TAB policing in button-clip.c; 2) Add François Dinel to CREDITS; 3) Add François Dinel as (C) holder in button-target.h (it was previously blank); 4) Add Rockbox header to bootloader/sansa_as3525.c with Rafaël Carré as (C) holder; 5) Change target_id to 50 (next available number) in tools/configure and fixed indentation; 6) Change MODEL_NUMBER in config-clip.h to 50 (next available number); 7) Remove unused in/out macros from system-target.h 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18782 a1c6a512-1295-4272-9138-f99709370657
 2008-10-12 16:46:01 +00:00
Frank Gevaerts
68d9fb95de lcd now shows things on the old-style Meizu M3. 
It needs to be re-tested on the new-style, colours are wrong, and timing loops need to be reviewed



git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18740 a1c6a512-1295-4272-9138-f99709370657
 2008-10-07 21:12:03 +00:00
Frank Gevaerts
2d5e6e1a87 LCD driver for meizu M3, new type (older M3s are not yet supported) 
Thanks to Denes Balatoni


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18719 a1c6a512-1295-4272-9138-f99709370657
 2008-10-05 20:01:25 +00:00
Dave Chapman
85807cd44e Trivial changes to make the main Rockbox builds for the Sansa m200 and Logik DAX ports compile. Note that some codecs are currently disabled (due to lowmem on these targets), but that needs more work and analysis to decide how much RAM we want to allocate to codecs. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18566 a1c6a512-1295-4272-9138-f99709370657
 2008-09-22 19:15:18 +00:00
Marcoen Hirschberg
48e45f5751 add Meizu M6SP and M3 ports 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18544 a1c6a512-1295-4272-9138-f99709370657
 2008-09-17 23:22:11 +00:00
Maurus Cuelenaere
9407ae838e Onda VX747: 
* Button driver rework
 * Backlight driver rework
 * LCD driver rework


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18543 a1c6a512-1295-4272-9138-f99709370657
 2008-09-17 21:44:47 +00:00
Frank Gevaerts
c0e898ae29 Now reads the LCD controller ID succesfully and flashes it using the backlight 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18531 a1c6a512-1295-4272-9138-f99709370657
 2008-09-16 16:51:25 +00:00
Maurus Cuelenaere
1e294e3f25 Onda VX747: 
* Get rid of bug when interrupts are enabled
 * Get threading to work (although with some weirdness)
 * Other fixes/optimizations


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18512 a1c6a512-1295-4272-9138-f99709370657
 2008-09-14 16:26:08 +00:00
Frank Gevaerts
1898ff753f * move qt1106 specific things to their own files 
* use CHANGE pin


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18496 a1c6a512-1295-4272-9138-f99709370657
 2008-09-11 18:18:40 +00:00
Maurus Cuelenaere
1ff9ce202d Fix mrobe500 svn:* 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18482 a1c6a512-1295-4272-9138-f99709370657
 2008-09-10 19:35:15 +00:00
Frank Gevaerts
3637ef9b32 First reading out of the touchpad! 
disabled power handling for now, so the device will power off when unplugged again (because there is no other poweroff method provided)


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18480 a1c6a512-1295-4272-9138-f99709370657
 2008-09-10 19:08:46 +00:00
Maurus Cuelenaere
23fc923bde ZVM: 
* Optimize MiniFS handling
 * Add basic CFS handling (doesn't work yet)
 * Remove hacky stuff in disk.c


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18438 a1c6a512-1295-4272-9138-f99709370657
 2008-09-07 17:24:14 +00:00
Dave Chapman
d462a64a91 Initial commit of iaudio 7 port by Vitja Makarov (FS#9245). Port is at quite an advanced stage, but is troubled by the lack of a reliable NAND driver (similar to the Cowon D2 port) and is not yet suitable for non-developers. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18435 a1c6a512-1295-4272-9138-f99709370657
 2008-09-06 17:50:59 +00:00
Maurus Cuelenaere
e144638167 Add Onda VX767 target 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18422 a1c6a512-1295-4272-9138-f99709370657
 2008-09-05 15:09:40 +00:00
Maurus Cuelenaere
5420c3f672 Share bootloader with Creative ZVM 30GB/60GB and Creative ZV 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18415 a1c6a512-1295-4272-9138-f99709370657
 2008-09-04 19:53:16 +00:00
Frank Gevaerts
e278b4fddb Turn off automatically after a number of backlight toggles. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18387 a1c6a512-1295-4272-9138-f99709370657
 2008-09-02 20:19:58 +00:00
Maurus Cuelenaere
78d44385fe Fix TABing 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18353 a1c6a512-1295-4272-9138-f99709370657
 2008-08-27 20:35:41 +00:00
Maurus Cuelenaere
944c33403c * Commit dual-boot support for Creative ZVx family 
* Add mkzenboot: makes it possible to integrate Rockbox bootloader with
   Creative firmwares without the need of distributing binaries
 * Add Tadeusz Pyś to credits, who figured out the minifs file system
 * Fix bootloader


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18352 a1c6a512-1295-4272-9138-f99709370657
 2008-08-27 20:32:12 +00:00
Maurus Cuelenaere
62c4a2838e Onda VX747: 
* Overall cleanup (still needs work)
  * Add preliminary USB support
  * Add power off support
  * Add preliminary MMU handling


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18348 a1c6a512-1295-4272-9138-f99709370657
 2008-08-26 21:48:49 +00:00
Maurus Cuelenaere
1392dc2144 Commit FS#9308: differentiate between TOUCHPAD & TOUCHSCREEN 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18338 a1c6a512-1295-4272-9138-f99709370657
 2008-08-23 09:46:38 +00:00
Maurus Cuelenaere
4bf4d2bb55 * Get interrupts working (but crashes after 10-30secs) 
* Make current_tick increase
* Convert button driver into SADC driver
* Make touchscreen handling work better (still needs good calibration routine)


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18240 a1c6a512-1295-4272-9138-f99709370657
 2008-08-10 21:44:48 +00:00
Maurus Cuelenaere
447ffc8bf8 * Add interrupt handling (but still not working) 
* Clean up linker script and bootup routines


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18229 a1c6a512-1295-4272-9138-f99709370657
 2008-08-09 23:31:38 +00:00
Barry Wardell
1ac260c0e6 Fix H10 bootloader locking up if the scroll pad was touched. May also fix any other lock ups from trying to read from the adc in the bootloader. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18208 a1c6a512-1295-4272-9138-f99709370657
 2008-08-07 11:23:40 +00:00
Maurus Cuelenaere
88ae9024e4 * Add basic (non-working) support for NAND flash 
* Add panicf() handling
* Add not-yet-enabled dma acceleration
* Other (minor) fixes


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18203 a1c6a512-1295-4272-9138-f99709370657
 2008-08-06 20:39:02 +00:00
Maurus Cuelenaere
06e3c660cc Prepare Creative bootloader compilation for future dual boot integration 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18187 a1c6a512-1295-4272-9138-f99709370657
 2008-08-03 19:32:14 +00:00
Maurus Cuelenaere
06efd071a9 Updated bootloader containing more debug information 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18151 a1c6a512-1295-4272-9138-f99709370657
 2008-07-30 10:24:39 +00:00
Maurus Cuelenaere
1f692e5f55 1) Set svn:keywords where they should've been set 
2) Onda VX747 specific changes


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18080 a1c6a512-1295-4272-9138-f99709370657
 2008-07-17 10:13:56 +00:00
Maurus Cuelenaere
975261f003 Fix the LCD bug! 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18071 a1c6a512-1295-4272-9138-f99709370657
 2008-07-16 15:25:35 +00:00
Maurus Cuelenaere
ea9d107320 Forgot a file.. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18053 a1c6a512-1295-4272-9138-f99709370657
 2008-07-15 17:20:07 +00:00
Maurus Cuelenaere
e6248f2e5d Remove svn:executable 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18033 a1c6a512-1295-4272-9138-f99709370657
 2008-07-14 15:09:22 +00:00
Maurus Cuelenaere
0709f0a5c6 Add preliminary support for the Onda VX747 (MIPS target) 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18032 a1c6a512-1295-4272-9138-f99709370657
 2008-07-14 15:03:10 +00:00
Marc Guay
f6cde72ce9 Fix a few dead references in the manual and add an 's' where one was missing. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17972 a1c6a512-1295-4272-9138-f99709370657
 2008-07-06 21:32:59 +00:00
Jens Arnold
b1e16d2161 Repair charging screen on archos. usb_detect() doesn't return a boolean since 2007-09-04. Fixed same problem in the m:robe 500 bootloader and in bootbox. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17955 a1c6a512-1295-4272-9138-f99709370657
 2008-07-06 12:14:13 +00:00
Daniel Stenberg
2acc0ac542 Updated our source code header to explicitly mention that we are GPL v2 or 
later. We still need to hunt down snippets used that are not. 1324 modified
files...
http://www.rockbox.org/mail/archive/rockbox-dev-archive-2008-06/0060.shtml


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17847 a1c6a512-1295-4272-9138-f99709370657
 2008-06-28 18:10:04 +00:00
Marcoen Hirschberg
7b10ef9a7c initial Meizu M6SL port (take 2) 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17819 a1c6a512-1295-4272-9138-f99709370657
 2008-06-27 23:24:34 +00:00
Mark Arigo
22e7bf32b8 My Devcon 2008 contribution: port for Philips GoGear HDD1630 (PP5022-based). Current status is that the bootloader works to load Rockbox, but dual boot does not work: it freezes after decrypting the OF. When Rockbox boots, it freezes somewhere between showing the logo and the main menu. And there's no driver for the touchpad. So lots of work left. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17809 a1c6a512-1295-4272-9138-f99709370657
 2008-06-27 18:40:25 +00:00
Marc Guay
b93667b306 Add the Sansa c100 as a build target with basic drivers. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17742 a1c6a512-1295-4272-9138-f99709370657
 2008-06-21 15:18:36 +00:00
Mark Arigo
badb6dae62 Add mi4 key for the Philips GoGear HDD1630 (PP5022-based) 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17660 a1c6a512-1295-4272-9138-f99709370657
 2008-05-30 04:14:23 +00:00
Mark Arigo
b4275d4941 Philips GoGear SA9200 port. Working bootloader and normal builds, including sound. No touchpad now, buttons limited to using vol+/vol-/power for up/down/select. Rockbox USB is enabled since the OF is MTP only...read the warnings on the PortalPlayerUsb wiki page. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17591 a1c6a512-1295-4272-9138-f99709370657
 2008-05-21 03:55:17 +00:00
Barry Wardell
63f4f68a74 Don't need this any more since it's the default now. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17457 a1c6a512-1295-4272-9138-f99709370657
 2008-05-11 15:30:15 +00:00
Michael Sevakis
80278e45aa Bring Gigabeat S bootloader one step close to a release version. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17442 a1c6a512-1295-4272-9138-f99709370657
 2008-05-10 18:00:11 +00:00
Michael Sevakis
c41cacaf30 Do some gigabeat S bootloader cleanup (includes, const, static-ing, number of variables, etc.). Make sure a tar file isn't too big before loading it however unlikely that is. No overall functional change but bump to v.00000013 for tracking purposes. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17403 a1c6a512-1295-4272-9138-f99709370657
 2008-05-07 07:14:39 +00:00
Michael Sevakis
0218397cf4 Gigabeat S bootloader: 1) Switch order of .vectors to be contiguous with initialized sections. 2) Clean all caches in main before doing anything else because vector copying counts as self-modifying code. Up to v.00000012. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17381 a1c6a512-1295-4272-9138-f99709370657
 2008-05-05 13:30:29 +00:00
Barry Wardell
536d2feedb Oops. Forgot to svn add this. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17375 a1c6a512-1295-4272-9138-f99709370657
 2008-05-05 12:12:55 +00:00
Barry Wardell
940091ae38 FS#7977: Bootloader logo for PP-based targets (H10, Sansa, M-Robe 100). 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17374 a1c6a512-1295-4272-9138-f99709370657
 2008-05-05 12:05:00 +00:00
Michael Sevakis
75fe8875bc Fix firmware load error display and handling in Gigabeat S bootloader. Remove "Hello World". v.00000011 now. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17347 a1c6a512-1295-4272-9138-f99709370657
 2008-05-04 03:44:49 +00:00
Dave Chapman
f2042983f0 Add the Sansa M200 (v1) as a target - it's extremely similar to the Logik DAX (the LCD driver worked unchanged). Plus various tcc77x work, including a working tick interrupt (enabled in the bootloader). Rockbox itself builds for the M200 (there are no keymaps yet for the DAX), but doesn't progress very far due to the lack of an ATA (NAND flash) driver. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17306 a1c6a512-1295-4272-9138-f99709370657
 2008-05-02 19:12:09 +00:00
Jens Arnold
2bbacf89fe Make sure the linker considers crt0*.o before all files specified on the command line by using STARTUP() instead of INPUT() in the .lds. Using INPUT() makes the linker process crt0*.o after all files specified on the command line, making linking fail if there are librockbox.a members which are only referenced by crt0*.o. Remove the hackaround that was needed for building the gigabeat S bootloader before (aka UIE() problem). 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17289 a1c6a512-1295-4272-9138-f99709370657
 2008-04-29 06:19:32 +00:00
Rob Purchase
18b004b330 Enable 'touchscreen areas' on the D2, based on JdGordon's m:robe code. Disable the bootloader debug screen, as that stuff is all available from the Debug menu now. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17257 a1c6a512-1295-4272-9138-f99709370657
 2008-04-27 13:30:11 +00:00
Karl Kurbjun
7510335fc4 This is a big chunk of code necessary to prepare for Gigabeat F flash loading and and implementation of rolo. There should be no noticible changes for the user. A new bootloader is not needed. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17213 a1c6a512-1295-4272-9138-f99709370657
 2008-04-22 04:34:25 +00:00
Michael Sevakis
8ec1dca0da Enable program flow prediction in the system control coprocessor setup in the bootloader. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17211 a1c6a512-1295-4272-9138-f99709370657
 2008-04-21 21:45:58 +00:00
Michael Sevakis
2920359cca Unreverse Gigabeat S bootloader. Boot Rockbox with hold switch off. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17203 a1c6a512-1295-4272-9138-f99709370657
 2008-04-21 04:34:39 +00:00
Michael Sevakis
9003dbe5b2 Make the inital connect problem go away on Gigabeat S. Would be nice if a better way were found but it works for me. Update the bootloader to have it work. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17181 a1c6a512-1295-4272-9138-f99709370657
 2008-04-20 03:30:57 +00:00
Michael Sevakis
94f7d0f290 UMS for the Gigabeat S. Bootloader USB mode. Has a couple quirks 1) First plug has problems if cold. Replug if it doesn't connect or not at high speed 2) Linux doesn't like the odd bootable flag value used in the partitions so it won't mount but Windows works. Fix minor OTG driver bugs and clean up device memory handling. Generic name for ARC controller driver. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17154 a1c6a512-1295-4272-9138-f99709370657
 2008-04-18 16:42:50 +00:00
Nicolas Pennequin
90a3d58013 Gigabeat S bootloader: Improve untarring by reading the whole file to memory before starting to write the output files. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17136 a1c6a512-1295-4272-9138-f99709370657
 2008-04-16 00:38:06 +00:00
Nicolas Pennequin
620e6b4d93 Gigabeat S bootloader: make it move a rockbox binary back to /.rockbox/ when it finds one in the MTP directory. 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17133 a1c6a512-1295-4272-9138-f99709370657
 2008-04-15 23:17:03 +00:00
Jonathan Gordon
5b5a626bb6 Setup the touchpads to have two modes - stylus and button - and set them in button mode by default. 
in button mode the touchpad is split into a 3x3 grid for 9 seperate buttons which can be used by the action system like real buttons.
Unify the keymap file for the touchpads in button mode. the target keymap file only needs to worry about real buttons.
(As these ports mature each screen will need to be fixed seperatly to be able to use stylus mode (the lists can already but don't change mode just yet.)


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17114 a1c6a512-1295-4272-9138-f99709370657
 2008-04-15 10:35:11 +00:00
Daniel Stenberg
7387a0470e sync with key list with mi4code and add the single mi4 key it had but this 
still didn't


git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17077 a1c6a512-1295-4272-9138-f99709370657
 2008-04-11 21:11:55 +00:00
Mark Arigo
f46a7533a4 mi4 key for the Philips GoGear SA9200 (PP5024). Let the fun begin... 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17069 a1c6a512-1295-4272-9138-f99709370657
 2008-04-11 03:57:16 +00:00
Rob Purchase
f4deea6027 D2: Update dual boot to use the hold switch. Update bootloader to show messages until HOLD released, keep holding POWER to show old debug screen (these modes will eventually be removed). 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@17032 a1c6a512-1295-4272-9138-f99709370657
 2008-04-08 08:01:18 +00:00
Jens Arnold
02580851ad Revert... stupid svn doesn't complain when passing -m twice :( 
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@16939 a1c6a512-1295-4272-9138-f99709370657
 2008-04-02 22:45:23 +00:00