This adds kinetic scrolling to to lists on touchscreen targets and RaaA, like all other OSes on touchscreens have.
It's only enabled in the absolute point mode, so for non-touchscreen and in grid mode nothing changes.
Kinetic scrolling means that the list keeps scrolling (but is decelerating) after you leave the touchscreen with the finger.
Redraw interval and deceleration is hardcoded for now but could be made configurable if desired.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28408 a1c6a512-1295-4272-9138-f99709370657
The parameter wasn't used yet and it's not clear whether it should be a absolute or relative viewport.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28242 a1c6a512-1295-4272-9138-f99709370657
They work as the drawrect/fillrect pendants but work on a viewport basis; pass NULL to draw the current viewport (the one set with set_viewport()).
In conjunction with action_get_touchscreen_press_in_vp() it should be less of a pain to draw buttons and get presses on them.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28239 a1c6a512-1295-4272-9138-f99709370657
Looks much smoother now as you don't scroll by whole lines anymore.
Add some functions lcd driver to enable the line based scrolling engine to draw the lines with a pixel-based y-offset.
This should also allow for a sensible kinetic scrolling mechanism (still a todo).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28214 a1c6a512-1295-4272-9138-f99709370657
Also add a panicf() if buffer_alloc() doesn't have enough space left to allocate a requested buffer
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28173 a1c6a512-1295-4272-9138-f99709370657
Exclude compilation of firmware/debug.c for hosted platforms.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28125 a1c6a512-1295-4272-9138-f99709370657
For this it needs to look at the plugin header. Since lc_open() doesn't know
it's a plugin, the header needs to be changed slightly to include the new lc_header (which needs to be the first element in plugin_header so it can be casted savely).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28054 a1c6a512-1295-4272-9138-f99709370657
The old cache coherency function names where wrong and misleading.
The new names are (purposely different from vendor manuals)
* commit_* (write-back only)
* discard_* (removing lines from cache only)
* commit_discard_* (write-back and removing lines from cache)
It's suspected the old names have led to wrong uses. The old names still exist
(as aliases) so every call via the old names need to be double checked and changed
to the new name.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28045 a1c6a512-1295-4272-9138-f99709370657
Ask for alignement of USB buffers on cache line
Also remind that the hardware is identical to the hardware in nano2g
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28033 a1c6a512-1295-4272-9138-f99709370657
FCLK is unused because we use fastbus clocking: CPU clock = PCLK
Base PCLK off PLLA and use the lowest frqeuency for FCLK (24MHz source,
maximum divider)
Save a bit of power, adjust Clipv1/e200v2/Fuzev1 current usage accordingly
Note: the power saving (in mA) is a bit less on e200v2/Fuzev1 than on Clipv1
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28000 a1c6a512-1295-4272-9138-f99709370657
AMS*: define CURRENT_MAX_CHG to give more correct estimation of recharge time
The amount of current each target draws from the charger is defined in
powermgmt-target.h
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27994 a1c6a512-1295-4272-9138-f99709370657
- change buffer alignement to 32 bytes (not sure if it's useful)
- flush rx fifo on reset
- use AS3525_PHYSICAL_ADDR for DMA
- reset endpoints structure states on reset
- force full speed for debugging purpose
- add more debugging code
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27986 a1c6a512-1295-4272-9138-f99709370657
Seperate make rules in a almost empty android.make.
Also add forgotten powermgmt-android.c
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27977 a1c6a512-1295-4272-9138-f99709370657
Use host's functions for file i/o directly (open(), close() ,etc.), not the sim_* variants.
Some dir functions need to be wrapped still because we need to cache the parents dir's path (host's dirent doesn't let us know).
For the same reason (incompatibility) with host's dirent) detach some members from Rockbox' dirent struct and put it into an extra one,
the values can be retrieved via the new dir_get_info().
Get rid of the sim_ prefix for sleep as well and change the signature to unix sleep().
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27968 a1c6a512-1295-4272-9138-f99709370657
Since memory on 32mb ipod videos is mapped twice, a 64mb build still has codecs and plugins mapped in a usable area. This means that all that needs to be done to support 32mb and 64mb boards with the same build is to adjust audiobufend to avoid using more than the actually present RAM.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27960 a1c6a512-1295-4272-9138-f99709370657
Removes the need to fix up those in the simulator.
Also work around some posix-mingw incompatibilities (e.g. getcwd()).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27904 a1c6a512-1295-4272-9138-f99709370657
It's a used by codec/plugin loading and vastly reduces code duplication. It's also a step forward in getting rid of libuisimulator in the application ports.
Apparently sh needs linker symbols prefixed with _ even if they're referenced without from C code.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27902 a1c6a512-1295-4272-9138-f99709370657
I don't understand the build error at all, plugin_bss_start is clearly defined in plugin.lds
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27901 a1c6a512-1295-4272-9138-f99709370657
It's a used by codec/plugin loading and vastly reduces code duplication. It's also a step forward in getting rid of libuisimulator in the application ports.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27900 a1c6a512-1295-4272-9138-f99709370657
