I copied the direction button description from snake2
manual, as both snakes seem to have the same controls.
No guarantee however :)
Change-Id: I8ca1ccf75f0737d5a922aae207c7c7efef5ec026
Some arm gcc versions have multiple cpp symbols beginning with
__ARM_ARCH, but want only the one that contains the arch version.
Change-Id: I6792572e29200fc4e62ba07bdd63dc722356c2bb
- more whitespace to enhance readability
- better/fixed/more comments ;)
- some minor optimizations
- general code cleanup
Change-Id: I2b5f69aba0f83f989abb2c636920646e4315583f
This tiny patch gives the player a bit time to
overlook the terrain and move the thumb to the
action button.
Change-Id: I63a4347c5bdafdd354f8c95b2bcdc64e046133a5
This tool can pack/unpack a jz4760 archive (like the one used for the fiio
x1/x3/x5), and can descramble/scramble (it's the same operation) a firmware
file (the sys.bin file in the archive). I did my best to keep the compatibility
with the leaked Fiio/Ingenic tool which has the same name.
I wrote the tools from scratch, but here are some remarks:
- the format used is a slightly modified IHFS used in the older JZ4640 series,
I used the information on the wiki about the IHFS format
- the CRC computation done was already reversed engineered by someone on the
forums but I realised this later
- There are a few unknown fields in the headers, see comments in the source code
- The firmware scrambling was discovered by pure guess, I realised there were
some repetitve sequences, some I guessed it was a rotative XOR and ran some
analysis to find the most probable sequence
Change-Id: Ib83735b3db8475be5de9c94231714e88668a0340
It was possible for interrupts of higher priority than the current IRQ
level to attempt to restart the interface while it was still active on
a transfer. The list modification also wasn't protected within the I2C
ISR itself.
Change-Id: I70635c307a1443bba6801c588cf1efde299db9a4
The solution is a bit hacky as it simply call make in libs
directory as pre-dependency. Clean doesn't touch libs.
Change-Id: Ib447a48fd87cc41228944f17444474a55d393543
It's not needed as picture flow has it's own buffer.
This reverts commit 9076b433d1.
Detailed explanation from Thomas Martiz (thanks!):
buflib buffers can be passed to yielding functions just fine. Problems
only arise if the are concurrent allocations, for example if two threads
allocate from the same context simultaneously or if the callee does it's
own allocations. This can't happen in the pictureflow case, it has it's
own context and a single thread allocating from it.
Therefore the problem isn't yield() itself, but possible concurrent
buflib_alloc() calls that result from the thread switch. This is because
compaction only ever happens on allocation (and not in a backgroud
thread or so).
This patch enables "Settings -> Sound Settings -> DAC's filter roll-off" for the
iBasso DX50.
Confirmed working on iBasso DX50, firmware 1.6.
Change-Id: I901615541d8fa4f6550c5156cf8c6069f5bdf9d0
- square sine tick and tock sounds (more annoying, more useful;-)
- optical indication of tics on display
- unification of mode of operation for SWCODEC and HWCODEC (tested on simulator)
Both playback and display drawing happen in main loop, always.
- operating in two modes now:
-- 1. classic dumb metronome
--- active when openened as application without file to open
--- the usual functionality with tapping and bpm change
--- controls indicated on display
-- 2. track mode with programmable series of parts
--- active when started as viewer for a .tempo file
--- differing meters (4/4, 3/4, 6/8, etc.)
--- patterns (tick/tock/silence on each beat)
--- smooth tempo changes in those tracks
This version had lots of testing regarding metronome accuracy,
resulting in the realization that PLL A and PLL B differ
on the Clip+, causing drift. There is still drift when the timer
intervall is too small, so I settled on 2 ms as compromise.
This is the final version, after adding documentation and extensive
help from Sebastian Leonhardt testing it on slower hardware (YH820),
where it works up to 650 actual bpm with display indication.
Latest change: Documentation nitpicks.
Change-Id: I764c8252526db188352385c5462f9453d882beb9
Depends on http://gerrit.rockbox.org/r/#/c/1043/.
This patch adds a new setting in Settings -> General -> System: USB Mode.
Usable in Quickscreen and Shortcuts.
Possible settings are:
- Mass Storage: The default, on USB connect export the internal and external
drives as usual. Rockbox will exit gracefully in this case, since the internal
drive (/mnt/sdcard) is exported as mass storage device and Android prevents
Rockbox from continued execution.
- Charge Only: USB charge only, do not export the internal and external drives.
This will not close Rockbox.
- ADB: Enable the Android Debug Bridge. This will not close Rockbox.
Charge only and ADB are actually the same, since it is not yet established if
charge only is doable without adb and major hooks into Android.
German translation provided.
This may be genric for Android based devices but is only enabled
for iBasso Devices. Other maintainers may choose do adopt this.
Change-Id: I616247c29946c6595ebcf8f0c14b2410c9f0498b
Depends on http://gerrit.rockbox.org/r/#/c/1043/.
This patch adds a new setting in Settings -> General
-> System: Freq Scaling Governor
Usable in Quickscreen and Shortcuts.
Possible settings are:
- Conservative: Slow frequency switching.
- Ondemand or Interactive: Fast frequency switching.
- Powersave: Allways lowest frequency.
- Performance: Allways highest frequency.
German translation provided.
This may be genric for Android kernel based devices but is only enabled
for iBasso Devices. Other maintainers may choose do adopt this.
Change-Id: I10296f5be9586ad3a409105db0cd03682a30e9c1
Reorganization
- Separated iBasso devices from PLATFORM_ANDROID. These are now standlone
hosted targets. Most device specific code is in the
firmware/target/hosted/ibasso directory.
- No dependency on Android SDK, only the Android NDK is needed.
32 bit Android NDK and Android API Level 16.
- Separate implementation for each device where feasible.
Code cleanup
- Rewrite of existing code, from simple reformat to complete reimplementation.
- New backlight interface, seperating backlight from touchscreen.
- Rewrite of device button handler, removing unneeded code and fixing memory
leaks.
- New Debug messages interface logging to Android adb logcat (DEBUGF, panicf,
logf).
- Rewrite of lcd device handler, removing unneeded code and fixing memory leaks.
- Rewrite of audiohw device handler/pcm interface, removing unneeded code and
fixing memory leaks, enabling 44.1/48kHz pthreaded playback.
- Rewrite of power and powermng, proper shutdown, using batterylog results
(see http://gerrit.rockbox.org/r/#/c/1047/).
- Rewrite of configure (Android NDK) and device specific config.
- Rewrite of the Android NDK specific Makefile.
Misc
- All plugins/games/demos activated.
- Update tinyalsa to latest from https://github.com/tinyalsa/tinyalsa.
Includes
- http://gerrit.rockbox.org/r/#/c/993/
- http://gerrit.rockbox.org/r/#/c/1010/
- http://gerrit.rockbox.org/r/#/c/1035/
Does not include http://gerrit.rockbox.org/r/#/c/1007/ due to new backlight
interface and new option for hold switch, touchscreen, physical button
interaction.
Rockbox needs the iBasso DX50/DX90 loader for startup, see
http://gerrit.rockbox.org/r/#/c/1099/
The loader expects Rockbox to be installed in /mnt/sdcard/.rockbox/. If
/mnt/sdcard/ is accessed as USB mass storage device, Rockbox will exit
gracefully and the loader will restart Rockbox on USB disconnect.
Tested on iBasso DX50.
Compiled (not tested) for iBasso DX90.
Compiled (not tested) for PLATFORM_ANDROID.
Change-Id: I5f5e22e68f5b4cf29c28e2b40b2c265f2beb7ab7
