fiio m3k native is currently the only player with
defined buttons different from the standard
mapping.
This allows the user to use the keyremap plugin
to specify differing keymaps for their device in the locked state
Change-Id: Ie0b447bba0d5978e8d23fed423df30c794afc6f9
Offers a quick way of switching to the Shortcuts Menu
by pressing the 'context menu' button while QuickScreen
is active (e.g. long press Select on iPods and some other
players)
Change-Id: I38292c7070cf093a81e1db688809b1f0d6a8764a
According to the on screen instructions, any other button
should mean No.
More importantly, in my experience at least, the Select
"button", since it is touch-activated, can sometimes be
pressed by accident, especially when a warning screen
is displayed as a result of pressing that same button.
Change-Id: Ieeadfa8018b5df99605297bc47948a181c22dab4
Recording works now, although I'm sure there will be a few
things that need fine-tuning. A major issue is that writing
to the SD card creates noticable interference, which happens
on the original firmware too but seems worse under Rockbox.
(Since Rockbox waits until RAM fills up before writing data,
the interference will only be heard on >50 MiB recordings.)
Change-Id: I5561dd9668c3bdd34e92f34ef50848aef8c0b7eb
This action has never been used since its introduction
in 2006. There's no real need for it, as it's possible
to reset settings from the context menu.
Change-Id: I6b357ad1a2e19a9b631ee3055e158492570479e3
The yes/no keymap does not fall back to the Standard
keymapping, so keys other than Back and Power do not
cancel, though the prompt says "any other key".
Adding fallback to standard context as well as explicit
Left, Right, Vol+ and Vol- as they're not present in
the standard context.
Tested on physical m3k
Change-Id: I06409bad8dcde6586e1bf773309ef0ce464cc060
- Add support for skip and seek while the player is locked.
(Thanks to @bahus for the suggestion)
- Fix touch zones because the down button zone ended up being
a lot smaller than expected due to the touchpad's wonkiness.
Also added a visual display of the touchpad to its debug menu.
- Fixes the pictureflow keymap because it was mostly unusable.
Change-Id: Ic0da4f8df3613ff7828ce1cb940ed9e77ada3281
This only required a minor patch to the usb-designware driver due
to DMA requiring physical addresses -- on the X1000, these differ
from virtual addresses so we have to do the usual conversion.
Both the mass storage and HID drivers work, but there are a few
issues so this can't be considered 100% stable yet.
- Mass storage might not be detected properly on insertion,
and USB has to be replugged before it shows up
- HID driver may occasionally panic or hang the machine
Change-Id: Ia3ce7591d5928ec7cbca7953abfef01bdbd873ef
Most credit goes to: Roman Skylarov
Additional integration and refactoring by myself.
*** COMPLETELY UNTESTED ***
Change-Id: Ia64c36d92e0214c6b15f7a868df286f8113ea27b
