Charge using 150mA current like the OF to charge faster
Edit clipv2 charging curve with 150mA
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26227 a1c6a512-1295-4272-9138-f99709370657
Move code not defined for bootloader under a single preprocessor check
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26219 a1c6a512-1295-4272-9138-f99709370657
GPIO direction needs only to be set at init
both functions are now one liners so make them static inline
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26218 a1c6a512-1295-4272-9138-f99709370657
It seems there is some significant variance between different greyscale ipods of the same model, so it's unlikely that *any* value will be great for everyone. I'm hoping that this is just high enough that the lightest screens aren't totally blank, but not dark enough that the darkest screens are entirely unreadably black ;)
This rather unsatisfactory compromise is to help us get a new bootloader release out (since bootloaders can't have their contrast adjusted) - a real fix would be to detect the LCD type, which the OF appears to be able to do (maybe).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26208 a1c6a512-1295-4272-9138-f99709370657
- forgot a ccu undocumented thing in init
- finish init code (following linux patch)
- enable interrupts
- don't use dynanmic fifo sizing by default
- move to a more static configuration of usb hardware parameters (it might be necessary to move them to config* files later).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26195 a1c6a512-1295-4272-9138-f99709370657
we still need to convert uncached addresses to physical addresses
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26177 a1c6a512-1295-4272-9138-f99709370657
No need for special address handling, all addresses are equal to their physical address
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26176 a1c6a512-1295-4272-9138-f99709370657
it's only needed if we hotswap the µSD or if we build the fuzev2
scrollwheel code without irq (which we don't do anyway)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26165 a1c6a512-1295-4272-9138-f99709370657
test_disk doesn't freeze anymore when closing the file between writing & reading
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26164 a1c6a512-1295-4272-9138-f99709370657
The list is ordered by priority, put the DMA and SD interrupts at
the top
This seems to fix the random freezes on heavy storage operation like
building database or pictureflow cache
The recently added audio interrupt had a priority higher than SD slot on
as3525v1, give it a lower priority
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26160 a1c6a512-1295-4272-9138-f99709370657
Show all the adc channels in the IO ports debug menu (not for as3525v2
since the channels are different)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26149 a1c6a512-1295-4272-9138-f99709370657
build it on fuzev2 and clipv2 too, it should be the same controller
as3525v1 file is only build for CONFIG_USBOTG == USBOTG_AS3525, no need
to check for it in the .c file
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26142 a1c6a512-1295-4272-9138-f99709370657
Note to self: Next time don't forget to check a AMSv2 build before committing...
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26130 a1c6a512-1295-4272-9138-f99709370657
- Enable end of charge monitoring once, it doesn't need to be disabled
- Acknowledge the first (wrong) end of charge interrupt on charger enable
(this had been broken in r25299)
- Centralize reads to ENRD* registers and cache the results when needed
- on PP it is not needed because reads are atomic, we only check for
end of charge when the charging, and for charger presence when
discharging
as3525v2 (using as3543) specifics
- I got the datasheet today from AMS, thanks to them for being so fast
and not require me to sign tons of papers!
- USB detection now works on as3525v2 using the as3543. Clip+ won't
reboot to OF yet, it needs mkamsboot support first (usbstack disabled)
- Charging should work, the CHARGER register is at a different place, it
is an extended PMU register -> use ascodec_read/write_charger() to
access it
- real interrupts are not used yet for ENRD, we get thousands of
interrupts per second, apparently only limited by the i2c clock.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26116 a1c6a512-1295-4272-9138-f99709370657
Better be safe than sorry, don't try to read/write outside our storage,
because we might overwrite the OF on the internal storage
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26077 a1c6a512-1295-4272-9138-f99709370657
-> Change references to as3517 into as3515
there is a reference to the as3515 in the public as3525 datasheet to
support this fact
as3517 is used in the as3527 SoC, the (public) as3527 datasheet has
detailed information on its registers
the audio codec/PMU used in as3525v2 (thought to be as3543) appears to be
compatible (identical?) with as3517
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26075 a1c6a512-1295-4272-9138-f99709370657
it would still flash when the light was off
it turns out that if B5 is set to input the light can't be turned on
but we can still select between µSD slot and internal storage
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26059 a1c6a512-1295-4272-9138-f99709370657
adjust logical starting sector to physical starting sector after the check
number of blocks is already adjusted from physical to logical
don't panic anymore when accessing the last part of storage
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26050 a1c6a512-1295-4272-9138-f99709370657
