..
archos /av300
Make ATA code not bother to retry requests that return IDNF (specified sector not valid).
2010-04-07 20:01:21 +00:00
as3525
sd-as3525: wait 100µs before disabling SD clocks
2010-05-19 14:06:13 +00:00
at91sam
imx31
Gigabeat S: Wrong thing messing with IPU_CONF. No fiddling is needed just yet.
2010-05-19 00:42:55 +00:00
ipod
No need to use alternating registers for dual register read/write sequence. Correct comment.
2010-05-10 20:35:57 +00:00
iriver
YUV Dither: r12 saving was removed but stacked parameter load offset wasn't changed to compensate, resulting in an improperly aligned dither kernel.
2010-05-15 20:25:56 +00:00
olympus
Fix a bunch of boot.lds files so that they build with newer ld. The stack/bss sections need NOLOAD. otherwise the linker would try to include those into the binary. I don't know why this ever worked with our current ld version.
2010-03-08 23:16:57 +00:00
pbell
Fix a bunch of boot.lds files so that they build with newer ld. The stack/bss sections need NOLOAD. otherwise the linker would try to include those into the binary. I don't know why this ever worked with our current ld version.
2010-03-08 23:16:57 +00:00
philips
Fix the remaining reds.
2010-05-06 22:33:57 +00:00
pnx0101
Move c/h files implementing/defining standard library stuff into a new libc directory, also standard'ify some parts of the code base (almost entirely #include fixes).
2010-05-06 21:04:40 +00:00
s3c2440
vuprintf does not belong in stdio.h, causes problems with other versions of stdio.h
2010-05-15 03:47:06 +00:00
s5l8700
PCM bottom layer simplification. pcm_rec_peak_addr variable no longer has to be handled there. Driver can just return current pointer for recording peaks. A new define, HAVE_PCM_REC_DMA_ADDRESS, specifies that physical addresses are being used for recording and translation is needed before starting a new block. The drivers need not worry about aligning start and size nor should care if either will be zero. All this will be checked in the logical layer first.
2010-05-12 14:05:36 +00:00
samsung
Move c/h files implementing/defining standard library stuff into a new libc directory, also standard'ify some parts of the code base (almost entirely #include fixes).
2010-05-06 21:04:40 +00:00
sandisk
Move c/h files implementing/defining standard library stuff into a new libc directory, also standard'ify some parts of the code base (almost entirely #include fixes).
2010-05-06 21:04:40 +00:00
tatung
Fix a bunch of boot.lds files so that they build with newer ld. The stack/bss sections need NOLOAD. otherwise the linker would try to include those into the binary. I don't know why this ever worked with our current ld version.
2010-03-08 23:16:57 +00:00
tcc77x
Move c/h files implementing/defining standard library stuff into a new libc directory, also standard'ify some parts of the code base (almost entirely #include fixes).
2010-05-06 21:04:40 +00:00
tcc780x
Fix some more snprintf related warnings.
2010-05-06 21:37:03 +00:00
tms320dm320
Fix last sprintf warning.
2010-05-06 22:54:40 +00:00
adc-as3514.c
adc-as3514.c: cosmetics
2010-05-15 19:44:54 +00:00
adc-pp5020.c
ascodec-pp.c
ascodec-target.h
as3514/as3543 fixes
2010-05-17 20:53:25 +00:00
ata-as-arm.S
ata-nand-telechips.c
ata-pp5002.c
ata-pp5020.c
ata-sd-pp.c
ata-sd-pp: reduce size of the buffer used to switch bank, no functional change intended.
2010-04-22 08:31:02 +00:00
ata-target.h
Make ATA code not bother to retry requests that return IDNF (specified sector not valid).
2010-04-07 20:01:21 +00:00
audio-pp.c
crt0-pp-bl.S
crt0-pp.S
Fix ipodvideo64mb by making the branch to main a long call.
2010-03-04 00:24:28 +00:00
crt0.S
as3525: Fix previous commit, IRAM_ORIG can not be represented as an immediate value on targets with 2MB of ram
2010-03-17 05:10:41 +00:00
ffs-arm.S
i2c-pp.c
i2c-telechips.c
i2s-pp.c
kernel-pp.c
lcd-as-memframe.S
YUV Dither: r12 saving was removed but stacked parameter load offset wasn't changed to compensate, resulting in an improperly aligned dither kernel.
2010-05-15 20:25:56 +00:00
lcd-c200_c200v2.c
See 0x429c in OF (lcd_init), B6 is lcd reset line.
2010-05-10 16:11:01 +00:00
lcd-ssd1815.c
memcpy-arm.S
memmove-arm.S
memset-arm.S
memset16-arm.S
mmu-arm.h
mmu-arm.S
as3525: use DMA for recording
2010-05-13 05:26:12 +00:00
mmu-armv6.S
mmu-armv6: comment out invalidate_dcache_range()
2010-04-13 15:25:11 +00:00
pcm-pp.c
Fix r25970 red and yellow *and* a bug uncovered for pp5002 where pcm_play_dma_start wasn't actually initializing the dma_play_data with the first buffer info (must've happened during pp502x DMA conversion).
2010-05-12 14:31:12 +00:00
pcm-telechips.c
Missed a yellow on Cowon D2. :)
2010-05-12 14:35:47 +00:00
powermgmt-ascodec.c
as3525v2: fix end of charge detection
2010-05-19 14:06:08 +00:00
sd-pp-target.h
support-arm.S
system-arm.c
Display Fault status address register on data/prefetch aborts
2010-03-09 16:19:50 +00:00
system-arm.h
system-pp502x.c
Packard Bell Vibe 500: reset all allowed devices like in the OF.
2010-03-09 19:09:17 +00:00
system-pp5002.c
system-target.h
Move CACHEALIGN_BITS to cpu headers
2010-04-13 15:50:08 +00:00
timer-pp.c
usb-drv-arc.c
Fix usb-arc driver: the driver would prematurely mark a transfer as complete whereas only a part of it actually is, check the active of the TDs to avoid that. This should fix some HID+UMS bugs.
2010-03-25 13:45:19 +00:00
usb-fw-pp502x.c
usb-fw-pp5002.c
usb-s3c6400x.c
Move c/h files implementing/defining standard library stuff into a new libc directory, also standard'ify some parts of the code base (almost entirely #include fixes).
2010-05-06 21:04:40 +00:00
usb-target.h
usb-tcc.c
Move c/h files implementing/defining standard library stuff into a new libc directory, also standard'ify some parts of the code base (almost entirely #include fixes).
2010-05-06 21:04:40 +00:00
wmcodec-pp.c
wmcodec-telechips.c
627baea953