| .. |
|
archos/av300
|
Make ATA code not bother to retry requests that return IDNF (specified sector not valid).
|
2010-04-07 20:01:21 +00:00 |
|
as3525
|
as3525v2: show adc channels in the debug menu
|
2010-05-18 20:01:49 +00:00 |
|
at91sam
|
Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h
|
2009-06-29 14:30:12 +00:00 |
|
imx31
|
Gigabeat S: Wrong thing messing with IPU_CONF. No fiddling is needed just yet.
|
2010-05-19 00:42:55 +00:00 |
|
ipod
|
No need to use alternating registers for dual register read/write sequence. Correct comment.
|
2010-05-10 20:35:57 +00:00 |
|
iriver
|
YUV Dither: r12 saving was removed but stacked parameter load offset wasn't changed to compensate, resulting in an improperly aligned dither kernel.
|
2010-05-15 20:25:56 +00:00 |
|
olympus
|
Fix a bunch of boot.lds files so that they build with newer ld. The stack/bss sections need NOLOAD. otherwise the linker would try to include those into the binary. I don't know why this ever worked with our current ld version.
|
2010-03-08 23:16:57 +00:00 |
|
pbell
|
Fix a bunch of boot.lds files so that they build with newer ld. The stack/bss sections need NOLOAD. otherwise the linker would try to include those into the binary. I don't know why this ever worked with our current ld version.
|
2010-03-08 23:16:57 +00:00 |
|
philips
|
Fix the remaining reds.
|
2010-05-06 22:33:57 +00:00 |
|
pnx0101
|
Move c/h files implementing/defining standard library stuff into a new libc directory, also standard'ify some parts of the code base (almost entirely #include fixes).
|
2010-05-06 21:04:40 +00:00 |
|
s3c2440
|
vuprintf does not belong in stdio.h, causes problems with other versions of stdio.h
|
2010-05-15 03:47:06 +00:00 |
|
s5l8700
|
PCM bottom layer simplification. pcm_rec_peak_addr variable no longer has to be handled there. Driver can just return current pointer for recording peaks. A new define, HAVE_PCM_REC_DMA_ADDRESS, specifies that physical addresses are being used for recording and translation is needed before starting a new block. The drivers need not worry about aligning start and size nor should care if either will be zero. All this will be checked in the logical layer first.
|
2010-05-12 14:05:36 +00:00 |
|
samsung
|
Move c/h files implementing/defining standard library stuff into a new libc directory, also standard'ify some parts of the code base (almost entirely #include fixes).
|
2010-05-06 21:04:40 +00:00 |
|
sandisk
|
Move c/h files implementing/defining standard library stuff into a new libc directory, also standard'ify some parts of the code base (almost entirely #include fixes).
|
2010-05-06 21:04:40 +00:00 |
|
tatung
|
Fix a bunch of boot.lds files so that they build with newer ld. The stack/bss sections need NOLOAD. otherwise the linker would try to include those into the binary. I don't know why this ever worked with our current ld version.
|
2010-03-08 23:16:57 +00:00 |
|
tcc77x
|
Move c/h files implementing/defining standard library stuff into a new libc directory, also standard'ify some parts of the code base (almost entirely #include fixes).
|
2010-05-06 21:04:40 +00:00 |
|
tcc780x
|
Fix some more snprintf related warnings.
|
2010-05-06 21:37:03 +00:00 |
|
tms320dm320
|
Fix last sprintf warning.
|
2010-05-06 22:54:40 +00:00 |
|
adc-as3514.c
|
adc-as3514.c: cosmetics
|
2010-05-15 19:44:54 +00:00 |
|
adc-pp5020.c
|
Add initial Packard Bell Vibe 500 port, by Szymon Dziok
|
2010-01-18 19:05:20 +00:00 |
|
ascodec-pp.c
|
|
|
|
ascodec-target.h
|
as3514/as3543 fixes
|
2010-05-17 20:53:25 +00:00 |
|
ata-as-arm.S
|
M:Robe 500 - Enable ASM optimized ATA interface improving disk access speed.
|
2009-11-09 00:38:10 +00:00 |
|
ata-nand-telechips.c
|
Core changes to allow storage drivers to do cleanup on shutdown, and iPod Nano 2G shutdown code rework (FS#10668)
|
2009-10-09 20:36:09 +00:00 |
|
ata-pp5002.c
|
Remove some unused declarations
|
2009-05-21 12:32:26 +00:00 |
|
ata-pp5020.c
|
Enable ATA DMA on pp5020 based players with ATA drives.
|
2010-01-31 11:07:29 +00:00 |
|
ata-sd-pp.c
|
ata-sd-pp: reduce size of the buffer used to switch bank, no functional change intended.
|
2010-04-22 08:31:02 +00:00 |
|
ata-target.h
|
Make ATA code not bother to retry requests that return IDNF (specified sector not valid).
|
2010-04-07 20:01:21 +00:00 |
|
audio-pp.c
|
correction on DEFINE, thanks to Kugel who spotted it ;)
|
2009-12-01 18:11:06 +00:00 |
|
crt0-pp-bl.S
|
Merry Christmas Gogear HDD6330 owners! This is the start of the HDD6330 port. At the moment, it's essentially a copy of the HDD1630 port with a minimal LCD driver. The touchpad doesn't work as expected, but you can still kind of navigate and listen to music/radio.
|
2009-12-25 04:05:01 +00:00 |
|
crt0-pp.S
|
Fix ipodvideo64mb by making the branch to main a long call.
|
2010-03-04 00:24:28 +00:00 |
|
crt0.S
|
as3525: Fix previous commit, IRAM_ORIG can not be represented as an immediate value on targets with 2MB of ram
|
2010-03-17 05:10:41 +00:00 |
|
ffs-arm.S
|
ARM <= v5: Tiny optimisation exploiting the location of the table.
|
2009-12-26 13:22:51 +00:00 |
|
i2c-pp.c
|
Add initial Packard Bell Vibe 500 port, by Szymon Dziok
|
2010-01-18 19:05:20 +00:00 |
|
i2c-telechips.c
|
Fix missing i2c mutex initialisation for telechips.
|
2009-06-21 13:26:32 +00:00 |
|
i2s-pp.c
|
Philips SA9200: initialize i2c, i2s, and as3514 as the OF does. Fixes clicks/pops heard when reading the adc.
|
2009-08-01 17:51:00 +00:00 |
|
kernel-pp.c
|
Correct Björn's name in various file headers.
|
2009-03-23 17:08:46 +00:00 |
|
lcd-as-memframe.S
|
YUV Dither: r12 saving was removed but stacked parameter load offset wasn't changed to compensate, resulting in an improperly aligned dither kernel.
|
2010-05-15 20:25:56 +00:00 |
|
lcd-c200_c200v2.c
|
See 0x429c in OF (lcd_init), B6 is lcd reset line.
|
2010-05-10 16:11:01 +00:00 |
|
lcd-ssd1815.c
|
|
|
|
memcpy-arm.S
|
Remove tabs
|
2010-02-07 17:50:24 +00:00 |
|
memmove-arm.S
|
Remove tabs
|
2010-02-07 17:50:24 +00:00 |
|
memset-arm.S
|
|
|
|
memset16-arm.S
|
|
|
|
mmu-arm.h
|
ARM922T's icache isn't coherent with its dcache, so we need to ensure that its flushed before changing codecs. Playback takes care of this for us, but only if we define cache coherency functions. Do that. Also, add a comment explaining that MMU functions need to be included so that other people don't spend hours chasing them in the future.
|
2009-07-05 01:17:25 +00:00 |
|
mmu-arm.S
|
as3525: use DMA for recording
|
2010-05-13 05:26:12 +00:00 |
|
mmu-armv6.S
|
mmu-armv6: comment out invalidate_dcache_range()
|
2010-04-13 15:25:11 +00:00 |
|
pcm-pp.c
|
Fix r25970 red and yellow *and* a bug uncovered for pp5002 where pcm_play_dma_start wasn't actually initializing the dma_play_data with the first buffer info (must've happened during pp502x DMA conversion).
|
2010-05-12 14:31:12 +00:00 |
|
pcm-telechips.c
|
Missed a yellow on Cowon D2. :)
|
2010-05-12 14:35:47 +00:00 |
|
powermgmt-ascodec.c
|
as3514/as3543 fixes
|
2010-05-17 20:53:25 +00:00 |
|
sd-pp-target.h
|
Merge tCardInfo struct (MMC) and tSDCardInfo struct (SD)
|
2009-07-01 10:07:22 +00:00 |
|
support-arm.S
|
Clarify comments in ARMv6 divider regarding special-case handling of large (high bit set) numerators.
|
2010-02-20 06:29:23 +00:00 |
|
system-arm.c
|
Display Fault status address register on data/prefetch aborts
|
2010-03-09 16:19:50 +00:00 |
|
system-arm.h
|
Change "r" back to "i" (i is for immediate, so no syntax error) and reclaim a bit binsize. Live with that those function don't build with -O0 since they rely on inlining.
|
2009-11-15 22:29:22 +00:00 |
|
system-pp502x.c
|
Packard Bell Vibe 500: reset all allowed devices like in the OF.
|
2010-03-09 19:09:17 +00:00 |
|
system-pp5002.c
|
Make RoLo work on PP5002. * Rename CACHE_CTL flag values on PP5002 for consistency.
|
2009-10-19 21:38:52 +00:00 |
|
system-target.h
|
Move CACHEALIGN_BITS to cpu headers
|
2010-04-13 15:50:08 +00:00 |
|
timer-pp.c
|
Put TIMER_FREQ definition in CPU-specific config, and remove timer-target.h
|
2009-06-29 14:30:12 +00:00 |
|
usb-drv-arc.c
|
Fix usb-arc driver: the driver would prematurely mark a transfer as complete whereas only a part of it actually is, check the active of the TDs to avoid that. This should fix some HID+UMS bugs.
|
2010-03-25 13:45:19 +00:00 |
|
usb-fw-pp502x.c
|
Add initial Packard Bell Vibe 500 port, by Szymon Dziok
|
2010-01-18 19:05:20 +00:00 |
|
usb-fw-pp5002.c
|
|
|
|
usb-s3c6400x.c
|
Move c/h files implementing/defining standard library stuff into a new libc directory, also standard'ify some parts of the code base (almost entirely #include fixes).
|
2010-05-06 21:04:40 +00:00 |
|
usb-target.h
|
|
|
|
usb-tcc.c
|
Move c/h files implementing/defining standard library stuff into a new libc directory, also standard'ify some parts of the code base (almost entirely #include fixes).
|
2010-05-06 21:04:40 +00:00 |
|
wmcodec-pp.c
|
Add initial Packard Bell Vibe 500 port, by Szymon Dziok
|
2010-01-18 19:05:20 +00:00 |
|
wmcodec-telechips.c
|
|
|
3356effcdf