..
config
rk27xx: switch to RKW format for binary
2012-03-04 00:35:32 +01:00
adc.h
adc-target.h: cleanup
2012-01-08 00:39:29 +00:00
aic3x.h
Sansa Connect: Revise codec initialization/shutdown.
2011-12-05 09:53:23 +00:00
ak4537.h
akcodec.h
as3514.h
AMSv2: add proper definitions for charge current
2012-03-04 12:23:05 +01:00
as3525.h
Move usb-s3c6400 register comments to usb-s3c6400.h
2011-12-13 04:21:06 +00:00
as3525v2.h
GHWCFG* are not as3525v2 specific
2012-01-01 19:21:49 +00:00
ascodec.h
remove now unused prototype
2012-01-08 01:44:08 +00:00
at91sam9260.h
ata-defines.h
Bulk convert all DOS line endings to UNIX.
2011-11-06 22:44:25 +00:00
ata-driver.h
Add STORAGE_INIT_ATTR to some target-specific ATA functions.
2011-12-09 02:07:24 +00:00
ata.h
FS#12418 - Merge prototypes from ata-target.h files into new file ata-driver.h. After this change:
2011-12-08 21:23:53 +00:00
ata_idle_notify.h
Rockbox as an application: Replace many occurences of #ifdef SIMULATOR with #if (CONFIG_PLATFORM & PLATFORM_HOSTED) (or equivalently).
2010-06-21 16:53:00 +00:00
ata_mmc.h
audio.h
Buflib: Make shrinking and buflib_available() smarter.
2011-11-17 17:55:02 +00:00
audiohw.h
Initial commit of the Samsung YP-R0 port.
2011-12-24 11:56:46 +00:00
backlight-sw-fading.h
backlight.h
move _remote_backlight_* to common header
2012-01-07 19:32:50 +00:00
bidi.h
bitswap.h
bootchart.h
bootchart.h doesn't need _ansi.h, especially not in a relative path
2010-07-25 15:28:24 +00:00
button.h
button-target.h : move prototypes to button.h
2012-01-08 00:07:19 +00:00
config.h
Don't define CPU_* for __PCTOOL__
2012-03-03 20:35:19 +01:00
config_caps.h
cpu.h
Rockchip rk27xx port initial commit. This is still work in progress.
2011-05-30 21:10:37 +00:00
cs42l55.h
Fix CS42L55 (iPod Classic) tone control
2011-01-07 23:09:09 +00:00
cscodec.h
New port: iPod Classic (also known as iPod 6G/6.5G/7G)
2011-01-02 23:16:27 +00:00
dac3550a.h
Bulk convert all DOS line endings to UNIX.
2011-11-06 22:44:25 +00:00
debug.h
Hosted: Merge debugf() implementations. Cleanup debug.h.
2012-01-21 18:39:19 +01:00
disk.h
Add more INIT_ATTR and add config.h includes to header files with INIT_ATTR.
2011-12-19 20:12:52 +00:00
dm320.h
Sandisk Sansa Connect port (FS #12363 )
2011-11-16 14:08:01 +00:00
ds2411.h
dsp-util.h
Collect the 16-bit signed range sample clipping routines scattered about, which can be optimized on armv6 and create firmware/export/dsp-util.h (for lack of better place right now).
2011-12-04 18:19:39 +00:00
dummy_codec.h
Added HiFiMAN HM-801 target. FS#12355. This also renames tda1543.{ch} used by HM-60x to dummy_codec.{ch} as it works for PCM1704 used by HM-801.
2011-11-03 11:53:02 +00:00
eeprom_24cxx.h
eeprom_settings.h
enc_base.h
Fix debug compilation of enc_base.h: define H_TO_BE32 as htobe32
2011-12-15 17:07:22 +00:00
events.h
FS#11263 - Radio Art support! %C and %Cl tags work in the radio screen and Base Skin when the radio is running.
2010-05-16 11:13:42 +00:00
fat.h
iPod Classic CE-ATA Support (Part 2 of 4: Remove on-stack sector buffers, and replace them with a single statically allocated sector buffer that's arbitrated amongst users)
2011-02-27 22:44:54 +00:00
filefuncs.h
struct DIR -> DIR, should fix most if not all reds.
2010-09-01 21:45:58 +00:00
fmradio.h
fmradio_i2c.h
mark some functions as init functions (discarded after init() has run)
2010-05-27 12:00:29 +00:00
font.h
glyph_cache_save should be static
2011-11-27 15:24:53 +00:00
gdb_api.h
general.h
Simplify mpegplayer a bit and use array-based lists rather than linked lists for stream management. Move a couple useful functions to handle pointer arrays from kernel.c into general.c; mpeglayer now makes use of them.
2010-05-17 12:34:05 +00:00
generic_i2c.h
Apply FS #11423 - Use udelay in AMS driver for FM radio I2C
2010-06-21 21:41:07 +00:00
hangul.h
hd66789r.h
hwcompat.h
Rockbox as an application: Replace many occurences of #ifdef SIMULATOR with #if (CONFIG_PLATFORM & PLATFORM_HOSTED) (or equivalently).
2010-06-21 16:53:00 +00:00
i2c-coldfire.h
Fix more tabs
2010-01-03 10:27:43 +00:00
i2c-pp.h
i2c-rk27xx.h
Rockchip rk27xx port initial commit. This is still work in progress.
2011-05-30 21:10:37 +00:00
i2c-s5l8700.h
i2c-s5l8702.h
New port: iPod Classic (also known as iPod 6G/6.5G/7G)
2011-01-02 23:16:27 +00:00
i2c.h
imx233/fuze+: replace software i2c by hardware i2c, make some code more correct, reduce code size of lcd init sequences
2011-07-03 15:18:41 +00:00
i2s.h
iap.h
IAP: use a state machine for handling iap packets, based on FS#12135
2011-09-25 12:19:33 +00:00
ifp_usb_serial.h
imx31l.h
Clean up multiple definitions of RAM size. Remove -DMEM (make) and MEM (code), use the already defined MEMORYSIZE instead.
2011-02-02 17:43:32 +00:00
imx233-codec.h
imx233/fuze+: fix codec prototype header
2011-10-18 22:03:29 +00:00
imx233.h
imx233: fix PHYISCAL_ADDR to handle the buffered region (hard to debug if misused)
2012-01-27 20:08:33 +01:00
ipod_remote_tuner.h
iap: pass length and data pointer to iap_handlepkt functions, this prepares for iap large packet support.
2011-05-02 21:55:13 +00:00
isp1362.h
isp1583.h
creative zvm isp1583 defines: move to isp1583.h
2011-12-31 18:44:32 +00:00
jz4740-codec.h
jz4740.h
jz_mxu.h
kernel.h
Get rid of a committed #define from kernel.h that didn't make the final cut. Put voice_wait in voice_thread.h where it ought.
2011-04-27 04:00:48 +00:00
lcd-charcell.h
lcd-remote.h
lcd/skin_engine: Add the ability to draw onto the backdrop layer
2012-02-28 23:03:04 +11:00
lcd.h
lcd drivers: split lcd_gradient_rect so it is actually useful
2012-03-01 00:10:17 +11:00
led.h
load_code.h
Commit to certain names for cache coherency APIs and discard the aliases.
2011-12-17 07:27:24 +00:00
logf.h
Move some gcc extensions to new gcc_extensions.h header
2010-07-25 14:44:29 +00:00
ltv350qv.h
lv24020lp.h
Signal strength meter for FM radio - FS#8151 by Przemysław Hołubowski
2010-11-11 21:13:29 +00:00
m5636.h
m66591.h
Correct svn:keywords and svn:eol-style on a few more files.
2009-07-12 09:43:44 +00:00
mas35xx.h
Separate mas35xx lowlevel stuff. Move SH specific bits to target tree. FS#11189 by me.
2010-10-31 21:09:34 +00:00
mascodec.h
FS#12378 : Removal of Archos HWCODEC unused code and data. Several large hardware-specific functions are kept for reference or future use.
2011-11-22 19:59:31 +00:00
mc13783.h
i.MX31: Fix a couple oopses from r31528
2012-01-03 06:13:59 +00:00
mcf5249.h
mcf5250.h
mips-archdefs.h
mips.h
mipsregs.h
mmc.h
Add more INIT_ATTR and add config.h includes to header files with INIT_ATTR.
2011-12-19 20:12:52 +00:00
mp3_playback.h
Tweak paramters of mp3_play_data and callback.
2012-03-04 14:50:47 -05:00
mv.h
Commit FS#9545, storage cleanup and multi-driver support
2009-07-17 22:28:49 +00:00
nand.h
Add more INIT_ATTR and add config.h includes to header files with INIT_ATTR.
2011-12-19 20:12:52 +00:00
nand_id.h
Correct svn:keywords and svn:eol-style on a few more files.
2009-07-12 09:43:44 +00:00
ohci.h
Add data structures
2009-07-12 15:29:22 +00:00
panic.h
Arm stack unwinder
2012-02-22 08:33:26 +01:00
pcf5060x.h
D2: Use a common function for reading ADC values from the PMU
2009-10-08 15:47:43 +00:00
pcf5063x.h
Initial support for runtime detection of the PMU used in newer D2+ models (PCF50635). The backlight and battery monitoring should work, but the RTC and touchscreen are not yet implemented.
2009-10-10 17:35:02 +00:00
pcf50605.h
pcf50606.h
D2: Use a common function for reading ADC values from the PMU
2009-10-08 15:47:43 +00:00
pcf50635.h
Initial support for runtime detection of the PMU used in newer D2+ models (PCF50635). The backlight and battery monitoring should work, but the RTC and touchscreen are not yet implemented.
2009-10-10 17:35:02 +00:00
pcm-internal.h
Revise the PCM callback system after adding multichannel audio.
2012-03-03 07:23:38 +01:00
pcm.h
Revise the PCM callback system after adding multichannel audio.
2012-03-03 07:23:38 +01:00
pcm_mixer.h
Revise the PCM callback system after adding multichannel audio.
2012-03-03 07:23:38 +01:00
pcm_sampr.h
AS3525v1/v2:
2011-12-08 19:20:00 +00:00
pl081.h
pl180.h
AMS Sansa: Add voltage defines to pl180.h. No functional changes.
2009-10-19 05:34:17 +00:00
pnx0101.h
power.h
Rework powermgmt to enable code re-use on appliation and sims.
2012-01-03 23:44:38 +00:00
powermgmt.h
powermgmt-target.h: move prototypes to powermgmt.h
2012-01-07 22:32:52 +00:00
pp5002.h
Revise the PCM callback system after adding multichannel audio.
2012-03-03 07:23:38 +01:00
pp5020.h
Bootloader USB mode for PP502x. Enable only on GoGear SA9200 for the time being. Add HAVE_BOOTLOADER_USB_MODE to config if BOOTLOADER is defined to enable it. Clean up some kernel stuff a little to support it. Mess up a bunch of other stuff (hopefully not too badly).
2011-01-15 08:19:30 +00:00
pp5024.h
pp6100.h
Add information gleaned from disassembling the main firmware image. Detect lcd type in use. Still no actual output
2009-07-17 20:40:40 +00:00
profile.h
qt1106.h
r61509.h
Onda VX7x7: fix error when compiling with USB_BOOT defined
2009-07-29 12:57:42 +00:00
ramdisk.h
Add more INIT_ATTR and add config.h includes to header files with INIT_ATTR.
2011-12-19 20:12:52 +00:00
rbpaths.h
Set HOME_DIR to "/". Should fix FS#12500.
2012-01-17 18:44:29 +01:00
rda5802.h
Signal strength meter for FM radio - FS#8151 by Przemysław Hołubowski
2010-11-11 21:13:29 +00:00
rds.h
rds: add basic RDS clock-time support
2012-02-18 11:02:13 +01:00
rk27xx.h
rk27xx - implement cache_commit_discard(). Cache is still not enabled in crt0.S
2011-07-19 06:49:03 +00:00
rk27xx_codec.h
Implement driver for internal codec in rk27xx (shCODlp-100.01-HD IP core from Dolphin)
2011-09-06 12:37:57 +00:00
rkw-loader.h
rename rkw.h header file
2012-03-04 00:36:02 +01:00
rolo.h
rtc.h
rtc_enable_alarm() needs no return value
2010-05-22 00:28:26 +00:00
s1a0903x01.h
s3c2440.h
s5l870x : use mmu-arm.S
2010-04-13 15:59:49 +00:00
s5l8700.h
s5l870x: use usb-s3c6400 defines
2011-12-13 05:25:57 +00:00
s5l8702.h
s5l870x: use usb-s3c6400 defines
2011-12-13 05:25:57 +00:00
screendump.h
Really fix yellow: Rename BMP_LINESIZE and BMP_BPP to get rid of the macro name collision
2010-10-25 12:52:02 +00:00
scroll_engine.h
Add more INIT_ATTR and add config.h includes to header files with INIT_ATTR.
2011-12-19 20:12:52 +00:00
sd.h
Add more INIT_ATTR and add config.h includes to header files with INIT_ATTR.
2011-12-19 20:12:52 +00:00
sdmmc.h
Remove card_enable_monitoring() and use a mutex instead. The card_enable_monitoring() method actually didn't eliminate the possible race conditions it was meant to fix.
2010-06-06 13:20:47 +00:00
serial.h
sh7034.h
si4700.h
RDS: Use a define that doesn't imply any particular hardware dependency.
2011-12-29 14:55:49 +00:00
sound.h
Gigabeat S: Fully enable access to hardware tone controls and 3-D effect feature. Under the hood, it's designated a hardware equalizer since it is one. Implement code framework for hardware EQ in general. Menu aspect is well abstracted and so the UI and strings can be changed around if taste doesn't quite suit. So far the emphasis is distinction of the UI labelling from the software EQ so that it's clear the settings are for a different thing.
2010-05-15 13:09:45 +00:00
spdif.h
spi.h
Clean spi.h and spi-target.h
2012-01-07 22:04:12 +00:00
storage.h
ypr0: Enable battery voltage read-out, charging monitoring and charger detection.
2011-12-31 13:34:56 +00:00
structec.h
sw_i2c.h
synaptics-mep.h
SA9200: Adjust touchpad sensitivities so that actual contact with the player is needed to cause button presses and hopefully those settings will work nicely. Add a parameter read function to the MEP driver for debugging and RE purposes; enable compilation of it if you want to use it. Make a note in power-sa9200.c about button inits.
2011-01-11 23:48:29 +00:00
synaptics-rmi.h
imx233/fuze+: replace software i2c by hardware i2c, make some code more correct, reduce code size of lcd init sequences
2011-07-03 15:18:41 +00:00
system.h
Integrate the warble tool in the regular build system.
2012-03-03 20:19:08 +01:00
tcc77x.h
Define CACHEALIGN_BITS for missing ARM CPUs for later use.
2010-11-19 07:17:20 +00:00
tcc780x.h
Define CACHEALIGN_BITS for missing ARM CPUs for later use.
2010-11-19 07:17:20 +00:00
tea5760.h
Signal strength meter for FM radio - FS#8151 by Przemysław Hołubowski
2010-11-11 21:13:29 +00:00
tea5767.h
Signal strength meter for FM radio - FS#8151 by Przemysław Hołubowski
2010-11-11 21:13:29 +00:00
thread.h
Fix checkwps.
2012-01-22 19:46:27 +01:00
timer.h
Rockbox as an application: Replace many occurences of #ifdef SIMULATOR with #if (CONFIG_PLATFORM & PLATFORM_HOSTED) (or equivalently).
2010-06-21 16:53:00 +00:00
tlv320.h
touchscreen.h
Touchscreen: Improved scroll threshold
2010-11-10 15:25:15 +00:00
tsc200x.h
Touchscreen support for newer Cowon D2+ hardware revisions (using TSC200x touchscreen controller).
2009-10-15 20:13:29 +00:00
tsc2100.h
M:Robe 500 and TSC2100: Add more to the initialization. Some GPIO initializations are now removed - this will be hanled by the OF or bootloader (when loading from flash).
2011-02-06 19:33:40 +00:00
tuner.h
Add more INIT_ATTR and add config.h includes to header files with INIT_ATTR.
2011-12-19 20:12:52 +00:00
uda1341.h
Improvements to mini2440/UDA1341 audio
2009-11-01 22:58:08 +00:00
uda1380.h
Fix more tabs
2010-01-03 10:27:43 +00:00
udacodec.h
usb-s3c6400x.h
GHWCFG* are not as3525v2 specific
2012-01-01 19:21:49 +00:00
usb-tcc.h
Fix more tabs
2010-01-03 10:27:43 +00:00
usb.h
Reorganise USB initialisation to not depend on a specific enumeration sequence, by Bartosz Fabianowski, with minor tweaks by Michael Sevakis (FS#12497)
2012-01-04 21:55:09 +00:00
usb_ch9.h
Fix more tabs
2010-01-03 10:27:43 +00:00
usb_core.h
New USB charging system, part 1 - API rework and user-visible setting update
2010-06-05 10:05:27 +00:00
usb_drv.h
Reorganise USB initialisation to not depend on a specific enumeration sequence, by Bartosz Fabianowski, with minor tweaks by Michael Sevakis (FS#12497)
2012-01-04 21:55:09 +00:00
wm8731.h
wm8751.h
slightly modified FS#11531 by me: WM8750/51 driver rework
2011-03-14 09:58:19 +00:00
wm8758.h
Submit first part of FS#12154. Whitespace removal and correction of several defines in WM8758 driver according to data sheet, no functional change. Thanks to Seheon Ryu.
2011-06-20 18:37:51 +00:00
wm8975.h
Fix FS#11973. iPod nano1G needed reboot after entering record mode to have audio again.
2011-03-03 20:53:30 +00:00
wm8978.h
Gigabeat S/i.MX31/wm8978: Clean up clocking information in the general wmcodec/pcm drivers and move it to the target's wmcodec/i2s files.
2011-10-17 15:37:14 +00:00
wm8985.h
Submit FS#11240 by Raphael Jakse. Allows to reduce volume on WM8985 to -89 dB (e.g. used for Cowon D2). Below -57 dB the line out is affected. The manual is updated accordingly.
2010-05-30 18:29:04 +00:00
wmcodec.h
d18a5cad7f