| .. |
|
adc.h
|
Various coldfire fixes: (1) iAudio Bootloader: Check the status of main & remote power button vs. the respective hold switch, and shut down when on hold. On X5/M5 this check is not strictly necessary for the main unit, but left there to keep things uniform. (2) M3: Stop reading the ADC properly before leaving the bootloader, on RoLo, and on reboot, to make it work reliably after those transitions. (3) Disable all interrupt sources on system init to avoid premature ISR calls after enabling interrupts in general. (4) iAudios: Proper implementation of ide_powered(), avoiding nasty HDD clicks in the bootloader when powering down, e.g. because of Hold. (5) Slight optimisations.
|
2008-03-17 23:47:38 +00:00 |
|
as3514.h
|
FS#8898 - Prefix AS3514 registers with AS3514_
|
2008-04-15 21:33:32 +00:00 |
|
ata.h
|
Bring Gigabeat S bootloader one step close to a release version.
|
2008-05-10 18:00:11 +00:00 |
|
ata_idle_notify.h
|
Implement the playback event handling as a system-wide multi-purpose event system. Unified mpeg.c and playback.c audio event handling. Converted ata_idle_notify to use the new event handling system also.
|
2008-03-16 13:55:16 +00:00 |
|
ata_mmc.h
|
|
|
|
audio.h
|
Revert my earlier const madness, we'll keep the parameter lists simple.
|
2008-03-28 12:51:33 +00:00 |
|
audiohw.h
|
simplify this #if statement too
|
2008-05-16 20:26:20 +00:00 |
|
backlight.h
|
Straigten-out lcd sleeping on Gigabeat F/X. Add a service function to backlight.c to handle lcd sleep timer. Make HAVE_LCD_SLEEP useable without a setting and use HAVE_LCD_SLEEP_SETTING when a setting is available in addition to HCD_HAVE_SLEEP. If a setting isn't used, the target must define the timeout to be used in the config.
|
2008-05-14 19:29:25 +00:00 |
|
bidi.h
|
Made source files #include the header file that they implement to make sure they are in sync. Made some local functions static.
|
2008-05-03 08:35:14 +00:00 |
|
bitswap.h
|
|
|
|
buffer.h
|
|
|
|
button.h
|
Bring Gigabeat S bootloader one step close to a release version.
|
2008-05-10 18:00:11 +00:00 |
|
config-c200.h
|
Straigten-out lcd sleeping on Gigabeat F/X. Add a service function to backlight.c to handle lcd sleep timer. Make HAVE_LCD_SLEEP useable without a setting and use HAVE_LCD_SLEEP_SETTING when a setting is available in addition to HCD_HAVE_SLEEP. If a setting isn't used, the target must define the timeout to be used in the config.
|
2008-05-14 19:29:25 +00:00 |
|
config-cowond2.h
|
Enable 'touchscreen areas' on the D2, based on JdGordon's m:robe code. Disable the bootloader debug screen, as that stuff is all available from the Debug menu now.
|
2008-04-27 13:30:11 +00:00 |
|
config-creativezv.h
|
1) Add ZVM60GB and ZV simulator builds (ZVM60GB sim equals to ZVM30GB)
|
2008-05-15 18:01:14 +00:00 |
|
config-creativezvm.h
|
1) Use a separate config-<target>.h for Zen Vision(:M) (60GB)
|
2008-05-14 18:55:19 +00:00 |
|
config-creativezvm60gb.h
|
Fix yellows and reds.
|
2008-05-14 20:36:25 +00:00 |
|
config-e200.h
|
Fix red. No bother with lcd power management calls in bootloader.
|
2008-05-14 20:26:20 +00:00 |
|
config-fmrecorder.h
|
use HAVE_ATA to decide if ata.c should be compiled
|
2008-03-27 10:58:36 +00:00 |
|
config-gigabeat-s.h
|
Bring Gigabeat S bootloader one step close to a release version.
|
2008-05-10 18:00:11 +00:00 |
|
config-gigabeat.h
|
Fix red. No bother with lcd power management calls in bootloader.
|
2008-05-14 20:26:20 +00:00 |
|
config-h10.h
|
Fix red. No bother with lcd power management calls in bootloader.
|
2008-05-14 20:26:20 +00:00 |
|
config-h10_5gb.h
|
use HAVE_ATA to decide if ata.c should be compiled
|
2008-03-27 10:58:36 +00:00 |
|
config-h100.h
|
use HAVE_ATA to decide if ata.c should be compiled
|
2008-03-27 10:58:36 +00:00 |
|
config-h120.h
|
use HAVE_ATA to decide if ata.c should be compiled
|
2008-03-27 10:58:36 +00:00 |
|
config-h300.h
|
use HAVE_ATA to decide if ata.c should be compiled
|
2008-03-27 10:58:36 +00:00 |
|
config-iaudiom3.h
|
use HAVE_ATA to decide if ata.c should be compiled
|
2008-03-27 10:58:36 +00:00 |
|
config-iaudiom5.h
|
use HAVE_ATA to decide if ata.c should be compiled
|
2008-03-27 10:58:36 +00:00 |
|
config-iaudiox5.h
|
Fix red. No bother with lcd power management calls in bootloader.
|
2008-05-14 20:26:20 +00:00 |
|
config-ifp7xx.h
|
|
|
|
config-ipod1g2g.h
|
use HAVE_ATA to decide if ata.c should be compiled
|
2008-03-27 10:58:36 +00:00 |
|
config-ipod3g.h
|
Adding new setting to System Settings <Accessory Power Supply -- off by default). This setting can be used to enable/disable the power supply for accessories. With this commit implemented for iPods with PCF50605 power controller.
|
2008-04-20 18:28:25 +00:00 |
|
config-ipod4g.h
|
Adding new setting to System Settings <Accessory Power Supply -- off by default). This setting can be used to enable/disable the power supply for accessories. With this commit implemented for iPods with PCF50605 power controller.
|
2008-04-20 18:28:25 +00:00 |
|
config-ipodcolor.h
|
Adding new setting to System Settings <Accessory Power Supply -- off by default). This setting can be used to enable/disable the power supply for accessories. With this commit implemented for iPods with PCF50605 power controller.
|
2008-04-20 18:28:25 +00:00 |
|
config-ipodmini.h
|
Adding new setting to System Settings <Accessory Power Supply -- off by default). This setting can be used to enable/disable the power supply for accessories. With this commit implemented for iPods with PCF50605 power controller.
|
2008-04-20 18:28:25 +00:00 |
|
config-ipodmini2g.h
|
Adding new setting to System Settings <Accessory Power Supply -- off by default). This setting can be used to enable/disable the power supply for accessories. With this commit implemented for iPods with PCF50605 power controller.
|
2008-04-20 18:28:25 +00:00 |
|
config-ipodnano.h
|
Adding new setting to System Settings <Accessory Power Supply -- off by default). This setting can be used to enable/disable the power supply for accessories. With this commit implemented for iPods with PCF50605 power controller.
|
2008-04-20 18:28:25 +00:00 |
|
config-ipodvideo.h
|
Adding new setting to System Settings <Accessory Power Supply -- off by default). This setting can be used to enable/disable the power supply for accessories. With this commit implemented for iPods with PCF50605 power controller.
|
2008-04-20 18:28:25 +00:00 |
|
config-logikdax.h
|
Add the Sansa M200 (v1) as a target - it's extremely similar to the Logik DAX (the LCD driver worked unchanged). Plus various tcc77x work, including a working tick interrupt (enabled in the bootloader). Rockbox itself builds for the M200 (there are no keymaps yet for the DAX), but doesn't progress very far due to the lack of an ATA (NAND flash) driver.
|
2008-05-02 19:12:09 +00:00 |
|
config-m200.h
|
Add the Sansa M200 (v1) as a target - it's extremely similar to the Logik DAX (the LCD driver worked unchanged). Plus various tcc77x work, including a working tick interrupt (enabled in the bootloader). Rockbox itself builds for the M200 (there are no keymaps yet for the DAX), but doesn't progress very far due to the lack of an ATA (NAND flash) driver.
|
2008-05-02 19:12:09 +00:00 |
|
config-mrobe100.h
|
Straigten-out lcd sleeping on Gigabeat F/X. Add a service function to backlight.c to handle lcd sleep timer. Make HAVE_LCD_SLEEP useable without a setting and use HAVE_LCD_SLEEP_SETTING when a setting is available in addition to HCD_HAVE_SLEEP. If a setting isn't used, the target must define the timeout to be used in the config.
|
2008-05-14 19:29:25 +00:00 |
|
config-mrobe500.h
|
yep.. I really cant spell
|
2008-04-29 01:09:39 +00:00 |
|
config-ondiofm.h
|
|
|
|
config-ondiosp.h
|
|
|
|
config-player.h
|
Revert... stupid svn doesn't complain when passing -m twice :(
|
2008-04-02 22:45:23 +00:00 |
|
config-recorder.h
|
use HAVE_ATA to decide if ata.c should be compiled
|
2008-03-27 10:58:36 +00:00 |
|
config-recorderv2.h
|
use HAVE_ATA to decide if ata.c should be compiled
|
2008-03-27 10:58:36 +00:00 |
|
config-tpj1022.h
|
use HAVE_ATA to decide if ata.c should be compiled
|
2008-03-27 10:58:36 +00:00 |
|
config.h
|
1) Add ZVM60GB and ZV simulator builds (ZVM60GB sim equals to ZVM30GB)
|
2008-05-15 18:01:14 +00:00 |
|
config_caps.h
|
|
|
|
cpu.h
|
|
|
|
debug.h
|
|
|
|
disk.h
|
Convert the whole codebase to UTF-8, except docs/COMMITTERS and tools/creative.c, which need checking.
|
2008-05-05 10:32:46 +00:00 |
|
dm320.h
|
Fix red + add some extra defines.
|
2008-05-05 15:54:50 +00:00 |
|
ds2411.h
|
|
|
|
eeprom_24cxx.h
|
|
|
|
eeprom_settings.h
|
|
|
|
enc_base.h
|
|
|
|
events.h
|
Updated panicf in remove_event. Also fixed some comments.
|
2008-04-27 19:34:41 +00:00 |
|
fat.h
|
Do some crackdown on kernel object reinitialization after they could be in use and use before initialization. For c200/e200: Be sure fat cache and ata locks are acquired in the proper order during hot swapping. Delay hotswap monitoring until after initial file mounting (address 2nd kobj concern + possible call of fat driver before init).
|
2008-03-12 10:03:52 +00:00 |
|
fmradio.h
|
|
|
|
fmradio_i2c.h
|
Convert the whole codebase to UTF-8, except docs/COMMITTERS and tools/creative.c, which need checking.
|
2008-05-05 10:32:46 +00:00 |
|
font.h
|
Make checkwps compile again. Still more work is needed though, as checkwps is compiled to emulate an iPod Color - this needs changing to allow the LCD (and remote LCD) dimensions/depth to be specified on the commandline - the new %V tags are validated against the LCD characteristics
|
2008-03-25 21:09:58 +00:00 |
|
gdb_api.h
|
|
|
|
general.h
|
|
|
|
generic_i2c.h
|
|
|
|
hangul.h
|
|
|
|
hotswap.h
|
Preparing for the Philips SA9200 part 2. Since the SA9200 doesn't have a microsd card (no hotswap), use HAVE_ATA_SD for the Sansa flash driver so we don't rely on HAVE_HOTSWAP in some places.
|
2008-05-13 02:50:31 +00:00 |
|
hwcompat.h
|
|
|
|
i2c-coldfire.h
|
Correct the name of a flag. No functional change.
|
2008-03-18 22:48:26 +00:00 |
|
i2c-pp.h
|
Portal player i2c driver: More struct spinlock phaseout.
|
2007-11-12 07:58:54 +00:00 |
|
i2c.h
|
Update source files to include the header file for the functions they implement, to make sure the header and the implementation is consistent (and fix it for a case where it wasn't).
|
2008-04-28 10:22:05 +00:00 |
|
i2s.h
|
|
|
|
id3.h
|
Move a function to gwps-common.c because it belongs there
|
2008-04-12 13:25:16 +00:00 |
|
ifp_usb_serial.h
|
move the ifp7xx usb serial driver files to more specific names, to make the "usb_serial" name available for more general usb class driver use
|
2008-03-02 18:16:24 +00:00 |
|
imx31l.h
|
Enable write buffering for the 1MB device memory section. This means using a different device framebuffer address too. You must update the firmware _and_ bootloader.
|
2008-05-11 15:39:00 +00:00 |
|
isp1362.h
|
|
|
|
isp1583.h
|
Commit whole Creative Zen Vision:M target tree + all related firmware/
|
2008-04-24 20:08:28 +00:00 |
|
kernel.h
|
Convert the whole codebase to UTF-8, except docs/COMMITTERS and tools/creative.c, which need checking.
|
2008-05-05 10:32:46 +00:00 |
|
lcd-charcell.h
|
|
|
|
lcd-remote.h
|
Convert the whole codebase to UTF-8, except docs/COMMITTERS and tools/creative.c, which need checking.
|
2008-05-05 10:32:46 +00:00 |
|
lcd.h
|
Change the default background colour to black on colour targets. It fits better with the default theme and also with the bootloaders.
|
2008-05-05 13:11:38 +00:00 |
|
led.h
|
|
|
|
logf.h
|
|
|
|
ltv350qv.h
|
Use LTV350QV register definitions
|
2008-05-11 08:10:57 +00:00 |
|
lv24020lp.h
|
|
|
|
m5636.h
|
|
|
|
mas.h
|
|
|
|
mas35xx.h
|
Introduce PRESCALER_CAP and move some driver specific code to the correct place.
|
2008-05-14 21:35:19 +00:00 |
|
mc13783.h
|
Fix a couple mistakes. Forgot to add a few definitions.
|
2008-05-16 08:02:14 +00:00 |
|
mcf5249.h
|
|
|
|
mcf5250.h
|
|
|
|
mp3_playback.h
|
|
|
|
mp3data.h
|
|
|
|
mpeg.h
|
Updated use of events.h header file.
|
2008-04-27 19:56:16 +00:00 |
|
panic.h
|
|
|
|
pcf5060x.h
|
Split out the PCF5060x register defines into a common header and create a generic pcf50606.c using standard i2c read/writes.
|
2008-04-04 20:24:08 +00:00 |
|
pcf50605.h
|
|
|
|
pcf50606.h
|
Split out the PCF5060x register defines into a common header and create a generic pcf50606.c using standard i2c read/writes.
|
2008-04-04 20:24:08 +00:00 |
|
pcm.h
|
Unify PCM interface just above the hardware driver level for all targets including the sims. Perform lockout of audio callback when changing states. Weird new playback or recording trouble? Check before and after this revision first though things seem quite sound.
|
2007-10-06 22:27:27 +00:00 |
|
pcm_record.h
|
|
|
|
pcm_sampr.h
|
|
|
|
pnx0101.h
|
|
|
|
power.h
|
|
|
|
powermgmt.h
|
Adding new setting to System Settings <Accessory Power Supply -- off by default). This setting can be used to enable/disable the power supply for accessories. With this commit implemented for iPods with PCF50605 power controller.
|
2008-04-20 18:28:25 +00:00 |
|
pp5002.h
|
Fix the PP5002 interrupt controller register definitions. The PP5002 interrupt controller matches the first half of the PP502x interrupt controller (the actual interrupt bits are different though).
|
2008-04-03 21:48:41 +00:00 |
|
pp5020.h
|
move some data around to place qh_array at the start of iram. This saves up to about 2k iram on PP
|
2008-04-20 18:43:47 +00:00 |
|
pp5024.h
|
comment typo fixes
|
2008-02-22 20:23:00 +00:00 |
|
profile.h
|
Moved private types and constants from profile.h to profile.c
|
2008-04-28 18:41:13 +00:00 |
|
replaygain.h
|
|
|
|
rolo.h
|
Made rolo.h consistent with rolo.c
|
2008-05-03 07:17:44 +00:00 |
|
rtc.h
|
|
|
|
s1a0903x01.h
|
|
|
|
s3c2440.h
|
This is a big chunk of code necessary to prepare for Gigabeat F flash loading and and implementation of rolo. There should be no noticible changes for the user. A new bootloader is not needed.
|
2008-04-22 04:34:25 +00:00 |
|
scroll_engine.h
|
|
|
|
serial.h
|
|
|
|
sh7034.h
|
SH1: Changed UIE() to use the same reset method as on coldfire, using the watchdog timer. Should be more reliable this way. Disabled LED handling and added reboot-with-on for Ondio. * All: #ifdef cleanup in panicf(), added reboot-with-on for Ondio.
|
2005-11-09 00:54:43 +00:00 |
|
sound.h
|
More static / header file cleanup.
|
2008-05-03 23:18:56 +00:00 |
|
spdif.h
|
|
|
|
spi.h
|
|
|
|
structec.h
|
|
|
|
sw_i2c.h
|
|
|
|
system.h
|
Add a complete priority inheritance implementation to the scheduler (all mutex ownership and queue_send calls are inheritable). Priorities are differential so that dispatch depends on the runnable range of priorities. Codec priority can therefore be raised in small steps (pcmbuf updated to enable). Simplify the kernel functions to ease implementation and use the same kernel.c for both sim and target (I'm tired of maintaining two ;_). 1) Not sure if a minor audio break at first buffering issue will exist on large-sector disks (the main mutex speed issue was genuinely resolved earlier). At this point it's best dealt with at the buffering level. It seems a larger filechunk could be used again. 2) Perhaps 64-bit sims will have some minor issues (finicky) but a backroll of the code of concern there is a 5-minute job. All kernel objects become incompatible so a full rebuild and update is needed.
|
2008-03-25 02:34:12 +00:00 |
|
tcc77x.h
|
Convert the TCC77x ADC driver to use interrupts - based on the technique used in the SH ADC driver.
|
2008-05-03 07:49:39 +00:00 |
|
tcc780x.h
|
A few preparations for the D2 PCM driver: move driver up to TCC780x level, move FIQ handler into PCM driver, add some new register defines, and remove those goddamn warnings.
|
2008-04-21 20:16:18 +00:00 |
|
tea5767.h
|
|
|
|
thread.h
|
The presence of the run list corelocks are dependent on core number and not building with priority scheduling. Fix building for multiprocessor without HAVE_PRIORITY_SCHEDULING defined.
|
2008-05-04 17:12:37 +00:00 |
|
timer.h
|
Add the Sansa M200 (v1) as a target - it's extremely similar to the Logik DAX (the LCD driver worked unchanged). Plus various tcc77x work, including a working tick interrupt (enabled in the bootloader). Rockbox itself builds for the M200 (there are no keymaps yet for the DAX), but doesn't progress very far due to the lack of an ATA (NAND flash) driver.
|
2008-05-02 19:12:09 +00:00 |
|
tlv320.h
|
1) Use a separate config-<target>.h for Zen Vision(:M) (60GB)
|
2008-05-14 18:55:19 +00:00 |
|
tsc2100.h
|
fix red
|
2008-04-27 14:07:57 +00:00 |
|
tuner.h
|
Convert the whole codebase to UTF-8, except docs/COMMITTERS and tools/creative.c, which need checking.
|
2008-05-05 10:32:46 +00:00 |
|
uda1380.h
|
Introduce PRESCALER_CAP and move some driver specific code to the correct place.
|
2008-05-14 21:35:19 +00:00 |
|
usb.h
|
Bring Gigabeat S bootloader one step close to a release version.
|
2008-05-10 18:00:11 +00:00 |
|
usb_ch9.h
|
Add keywords and fix more headers.
|
2008-04-18 17:24:19 +00:00 |
|
usb_core.h
|
Convert the whole codebase to UTF-8, except docs/COMMITTERS and tools/creative.c, which need checking.
|
2008-05-05 10:32:46 +00:00 |
|
usb_drv.h
|
Convert the whole codebase to UTF-8, except docs/COMMITTERS and tools/creative.c, which need checking.
|
2008-05-05 10:32:46 +00:00 |
|
wm8721.h
|
Return value of audiohw_set_xxx_vol is never used and most of the time we have a return 0; --> kick it
|
2008-02-13 11:19:23 +00:00 |
|
wm8731.h
|
Return value of audiohw_set_xxx_vol is never used and most of the time we have a return 0; --> kick it
|
2008-02-13 11:19:23 +00:00 |
|
wm8751.h
|
hopefully fix problems with setting bass/treble on wm8751 tragets (mrobe100,...)
|
2008-05-12 18:42:20 +00:00 |
|
wm8758.h
|
add AUDIOHW_CAP for bass cutoff and treble cut off and fix a wrong ifdef for simulator.
|
2008-05-16 19:28:45 +00:00 |
|
wm8975.h
|
* introduce AUDIOHW_CAPS to define which audio codec can do what kind of operations in hw, e.g. setting bass
|
2008-04-28 08:37:18 +00:00 |
|
wm8978.h
|
Gigabeat S: Man it's so loud in here. We have SOUND! Someone please make keymaps consistent; it's rather messy atm.
|
2008-05-03 15:14:52 +00:00 |
|
wm8985.h
|
add AUDIOHW_CAP for bass cutoff and treble cut off and fix a wrong ifdef for simulator.
|
2008-05-16 19:28:45 +00:00 |
|
wmcodec.h
|
|
|
112656b7a6