fb35f06bf5
Drop most of the cases: only keep 64 MHz and 133 MHz. Pick values from the manual which seem to match real life values. Change-Id: I912752fbe372f9f44207db6853d0ff92fd619bed
206 lines
No EOL
8 KiB
C
206 lines
No EOL
8 KiB
C
/***************************************************************************
|
|
* __________ __ ___.
|
|
* Open \______ \ ____ ____ | | _\_ |__ _______ ___
|
|
* Source | _// _ \_/ ___\| |/ /| __ \ / _ \ \/ /
|
|
* Jukebox | | ( <_> ) \___| < | \_\ ( <_> > < <
|
|
* Firmware |____|_ /\____/ \___ >__|_ \|___ /\____/__/\_ \
|
|
* \/ \/ \/ \/ \/
|
|
* $Id$
|
|
*
|
|
* Copyright (C) 2013 by Amaury Pouly
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY
|
|
* KIND, either express or implied.
|
|
*
|
|
****************************************************************************/
|
|
#include "emi-imx233.h"
|
|
#include "clkctrl-imx233.h"
|
|
#include "string.h"
|
|
|
|
struct emi_reg_t
|
|
{
|
|
int index;
|
|
uint32_t value;
|
|
};
|
|
|
|
/* hardcode all the register values for the different settings. This avoid
|
|
* computing the register values at runtime since they never change and also
|
|
* avoid wasting some space in iram.
|
|
* Values from IMX233 manual, for Mobile DDR 7.5ns (133 MHz and 64MHz)
|
|
* Make sure the last value is written to register 40. */
|
|
|
|
static struct emi_reg_t settings_60M[15] ICONST_ATTR =
|
|
{
|
|
{4, 0x01000101}, /* DLL bypass mode, concurrent auto-precharge and bank split */
|
|
{7, 0x01000101}, /* Read/write grouping, extra clock for back to back, priority placement */
|
|
{12, 0x02020002}, /* tWR = 2 cycles, tRRD = 1 cycles, tCKE = 2 cycles */
|
|
{13, 0x06060a02}, /* CAS lat gate = 3.0 cycles, CAS lat = 3.0 cycles, tWTR = 2 */
|
|
{15, 0x02040000}, /* tRP = 2 cycles, tDAL = 4 cycles */
|
|
{17, 0x2d000005}, /* DDL: start point = 45, lock = 0, increment = 0, tRC = 5 cycles */
|
|
{18, 0x00000000}, /* */
|
|
{19, 0x01000b0b}, /* DLL: DQS out shift (bypass) = 1, DQS delay bypass (1/0) = 11 / 11 */
|
|
{20, 0x02030a00}, /* tRCD = 2 cycles, tRAS (min) = 3 cycles, DQS write shift (bypass) = 10 */
|
|
{21, 0x00000005}, /* tRFC = 5 cycles */
|
|
{26, 0x000001cc}, /* tREF = 460 cycles */
|
|
{32, 0x00081060}, /* tRAS (max) = 4192 cycles, tXSNR = 8 cycles */
|
|
{33, 0x00000008}, /* tXSR = 8 cycles */
|
|
{34, 0x00002ee5}, /* tINIT = 12005 cycles */
|
|
{40, 0x00020000} /* tPDEX = 2 */
|
|
};
|
|
|
|
static struct emi_reg_t settings_133M[15] ICONST_ATTR =
|
|
{
|
|
{4, 0x00000101}, /* concurrent auto-precharge and bank split */
|
|
{7, 0x01000001}, /* Read/write grouping, priority placement */
|
|
{12, 0x02020002}, /* tWR = 2 cycles, tRRD = 2 cycles, tCKE = 2 cycles */
|
|
{13, 0x06070a02}, /* CAS lat gate = 3.0 cycles, CAS lat = 3.5 cycles, tWTR = 2 */
|
|
{15, 0x03050000}, /* tRP = 3 cycles, tDAL = 5 cycles */
|
|
{17, 0x19000f0a}, /* DDL: start point = 25, lock = 0, increment = 15, tRC = 10 cycles */
|
|
{18, 0x1f1f0000}, /* DLL: DQS delay (1/0) = 31 / 31 */
|
|
{19, 0x000a0000}, /* DLL: DQS out shift = 10 */
|
|
{20, 0x03060023}, /* tRCD = 3 cycles, tRAS (min) = 6 cycles, DQS write shift = 35 */
|
|
{21, 0x0000000a}, /* tRFC = 10 cycles */
|
|
{26, 0x000003f7}, /* tREF = 1015 cycles */
|
|
{32, 0x001023cd}, /* tRAS (max) = 9165 cycles, tXSNR = 16 cycles */
|
|
{33, 0x00000010}, /* tXSR = 16 cycles */
|
|
{34, 0x00006665}, /* tINIT = 26213 cycles */
|
|
{40, 0x00040000} /* tPDEX = 4 */
|
|
};
|
|
|
|
static struct emi_reg_t settings_155M[15] ICONST_ATTR __attribute__((alias("settings_133M")));
|
|
|
|
static void set_frequency(unsigned long freq) ICODE_ATTR;
|
|
|
|
#if IMX233_SUBTARGET >= 3700
|
|
static void set_frequency(unsigned long freq)
|
|
{
|
|
/** WARNING all restriction of imx233_emi_set_frequency apply here !! */
|
|
/* Set divider and clear clkgate. */
|
|
unsigned fracdiv;
|
|
unsigned div;
|
|
switch(freq)
|
|
{
|
|
case IMX233_EMIFREQ_151_MHz:
|
|
/* clk_emi@ref_emi/3*18/19 */
|
|
fracdiv = 19;
|
|
div = 3;
|
|
/* ref_emi@480 MHz
|
|
* clk_emi@151.58 MHz */
|
|
break;
|
|
case IMX233_EMIFREQ_130_MHz:
|
|
/* clk_emi@ref_emi/2*18/33 */
|
|
fracdiv = 33;
|
|
div = 2;
|
|
/* ref_emi@480 MHz
|
|
* clk_emi@130.91 MHz */
|
|
break;
|
|
case IMX233_EMIFREQ_64_MHz:
|
|
default:
|
|
/* clk_emi@ref_emi/5*18/27 */
|
|
fracdiv = 27;
|
|
div = 5;
|
|
/* ref_emi@480 MHz
|
|
* clk_emi@64 MHz */
|
|
break;
|
|
}
|
|
BF_WR(CLKCTRL_FRAC, CLKGATEEMI, 0);
|
|
BF_WR(CLKCTRL_FRAC, EMIFRAC, fracdiv);
|
|
BF_WR(CLKCTRL_EMI, CLKGATE, 0);
|
|
BF_WR(CLKCTRL_EMI, DIV_EMI, div);
|
|
}
|
|
|
|
void imx233_emi_set_frequency(unsigned long freq) ICODE_ATTR;
|
|
|
|
void imx233_emi_set_frequency(unsigned long freq)
|
|
{
|
|
/** FIXME we rely on the compiler to NOT use the stack here because it's
|
|
* not in iram ! If it's not smart enough, one can switch the switch to use
|
|
* the irq stack since we are running interrupts disable here ! */
|
|
/** BUG for freq<=24 MHz we must keep bypass mode since we run on xtal
|
|
* since this setting is unused by our code so ignore this bug for now */
|
|
/** WARNING DANGER
|
|
* Changing the EMI frequency is complicated because it requires to
|
|
* completely shutdown the external memory interface. We must make sure
|
|
* that this code and all the data it uses in in iram and that no access to
|
|
* the sdram will be made during the change. Care must be taken w.r.t to
|
|
* the cache also. */
|
|
/** FIXME assume that auto-slow is disabled here since that could put some
|
|
* clock below the minimum value and we want to spend as least time as
|
|
* possible in this state anyway.
|
|
* WARNING DANGER don't call any external function when sdram is disabled
|
|
* otherwise you'll poke sdram and trigger a fatal data abort ! */
|
|
|
|
/* first disable all interrupts */
|
|
int oldstatus = disable_interrupt_save(IRQ_FIQ_STATUS);
|
|
/* flush the cache */
|
|
commit_discard_idcache();
|
|
/* put DRAM into self-refresh mode */
|
|
HW_DRAM_CTL08 |= BM_DRAM_CTL08_SREFRESH;
|
|
/* wait for DRAM to be halted */
|
|
while(!BF_RD(EMI_STAT, DRAM_HALTED));
|
|
/* load timings */
|
|
struct emi_reg_t *regs;
|
|
switch(freq)
|
|
{
|
|
case IMX233_EMIFREQ_151_MHz:
|
|
regs = settings_155M;
|
|
break;
|
|
case IMX233_EMIFREQ_130_MHz:
|
|
regs = settings_133M;
|
|
break;
|
|
case IMX233_EMIFREQ_64_MHz:
|
|
default:
|
|
regs = settings_60M;
|
|
break;
|
|
}
|
|
|
|
do
|
|
HW_DRAM_CTLxx(regs->index) = regs->value;
|
|
while((regs++)->index != 40);
|
|
/* switch emi to xtal */
|
|
BF_SET(CLKCTRL_CLKSEQ, BYPASS_EMI);
|
|
/* wait for transition */
|
|
while(BF_RD(CLKCTRL_EMI, BUSY_REF_XTAL));
|
|
/* put emi dll into reset mode */
|
|
// FIXME Unsure about what to do for stmp37xx
|
|
#if IMX233_SUBTARGET >= 3780
|
|
HW_EMI_CTRL_SET = BM_EMI_CTRL_DLL_RESET | BM_EMI_CTRL_DLL_SHIFT_RESET;
|
|
#endif
|
|
/* load the new frequency dividers */
|
|
set_frequency(freq);
|
|
/* switch emi back to pll */
|
|
BF_CLR(CLKCTRL_CLKSEQ, BYPASS_EMI);
|
|
/* wait for transition */
|
|
while(BF_RD(CLKCTRL_EMI, BUSY_REF_EMI));
|
|
/* allow emi dll to lock again */
|
|
#if IMX233_SUBTARGET >= 3780
|
|
HW_EMI_CTRL_CLR = BM_EMI_CTRL_DLL_RESET | BM_EMI_CTRL_DLL_SHIFT_RESET;
|
|
#endif
|
|
/* wait for lock */
|
|
while(!BF_RD(DRAM_CTL04, DLLLOCKREG));
|
|
/* get DRAM out of self-refresh mode */
|
|
HW_DRAM_CTL08 &= ~BM_DRAM_CTL08_SREFRESH;
|
|
/* wait for DRAM to be to run again */
|
|
while(HW_EMI_STAT & BM_EMI_STAT_DRAM_HALTED);
|
|
|
|
restore_interrupt(oldstatus);
|
|
}
|
|
#endif
|
|
|
|
struct imx233_emi_info_t imx233_emi_get_info(void)
|
|
{
|
|
struct imx233_emi_info_t info;
|
|
memset(&info, 0, sizeof(info));
|
|
info.rows = 13 - BF_RD(DRAM_CTL10, ADDR_PINS);
|
|
info.columns = 12 - BF_RD(DRAM_CTL11, COLUMN_SIZE);
|
|
info.cas = BF_RD(DRAM_CTL13, CASLAT_LIN);
|
|
info.banks = 4;
|
|
info.chips = __builtin_popcount(BF_RD(DRAM_CTL14, CS_MAP));
|
|
info.size = 2 * (1 << (info.rows + info.columns)) * info.chips * info.banks;
|
|
return info;
|
|
} |