The old deployment script doesn't work anymore due to the change to
cmake, and since we build the distribution packages (zip / dmg /
AppImage) with cmake directly there's not much need left for the old
deployment.
Change-Id: Ide20887c5bc2e22aabbfb47374d70529609fbc3c
if possible search clauses are converted to filters
once a logical OR is added to the mix (CLAUSE1|CLAUSE2 & CLAUS3))
if CLAUSE1,2 are database non-numeric tags they get made into filters
but the logical OR gets carried to the next CLAUSE
Rather than trying to figure this out just keep all clauses around a logical OR
Change-Id: I03e064e7f897033c5d47d78a1d34238217cde485
use the supplied yes_no dialogs for file delete, key reset, save prompt
return to root menu automatically after loading a file
fix bug where deleting the last file in the list exited the menu
Change-Id: Ib98f6b200b9dee3e4350ad4d7ef80bbb95c77481
Allow setting and removing keyremap on the fly
It was pretty annoying trying to work out a keyremap with a restart
required to set the remap and was quite annoying when I was no
longer able to navigate to the plugin or filebrowser due to setting
the wrong remap
now you can try out a keymap and if it doesn't work a restart will
sort things out
Change-Id: I848fb3bd759f9684ac2497324a371f92b7464f7b
results of an idea I discussed in IRC
changed the way the lookup in the remap file works..
entries consist of 3 int [action, button, prebtn]
context look up table is at the beginning
action_code contains the (context | CONTEXT_REMAPPED)
button_code contains the index of the first remapped action for the matched context
[0] CORE_CONTEXT_REMAP(ctx1) offset1=(3), count=(1)
[1] CORE_CONTEXT_REMAP(ctx2, offset2=(5), count=(1)
[2] sentinel, 0, 0
[3] act0, btn, 0
[4] sentinel 0, 0
[5] act1, btn, 0
[6] sentinel, 0, 0
Note:
last entry of each group is always the sentinel [CONTEXT_STOPSEARCHING, BUTTON_NONE, BUTTON_NONE]
contexts must match exactly -- re-mapped contexts run before the built in w/ fall through contexts
ie. you can't remap std_context and expect it to match std_context actions from the WPS context.
-- Done --
Code for reading core remap entries
-- Done --
import of core remap entires from disk
-- Done --
plugin to set new key mapping (the hard part)
The plugin is started and FULLY functional
you can add actions and contexts
you can change context, action, button, prebtn
delete keymap files
load keymapfiles
save user keymaps
test keymaps before applying them
loading keymaps to core still requires restart
-----------------------------------------------------------------------------------------------
Change-Id: Ib8b88c5ae91af4d540e1829de5db32669cd68203
There are various allocations that can't be moved or shrunk.
Provide a global callback struct for this use case instead of
making each caller declare its own dummy struct.
Also fixed ROLO and x1000 installer code which incorrectly
used movable allocations.
Change-Id: I00088396b9826e02e69a4a33477fe1a7816374f1
Tested with my SansaClip+. I don't think this will need extra battery
but let me know if I am wrong.
Change-Id: I287dae134113e0f8a138af68f5087b8ea45b0f4c
This kind of reverts 7b596416bf ("Gigabeat S: Update RDS processing to
use asynchronous I2C rather than thread."). However, requiring RDS to
run in thread context will a) allow more upcoming features and b) remove
quite some complexity from the codebase (see the diffstat here) because
Gigabeat is the only user. iMX31 should be able to handle one more
thread, as it can even run Linux.
Change-Id: I46130034595ba66392c5417c275d036f4bd26943
Elements were not being drawn correctly or
title text appeared delayed in several places
when using themes with a custom viewport
for list titles.
E.g.:
- after deleting a shortcut
- when returning from a warning screen in
Playlist Viewer
- returning to some Settings screens
- in "Playing time" screen
Change-Id: I8ab07a31d4b6f290e089ecd7857f43ec195a06e0
I must have only tested de8ee6c9e9 using my
custom iPod keymap. Re-mapping the "Left"
and "Right" buttons in this context badly breaks
existing behavior in Pictureflow when using
Rockbox's default iPod keymap.
Change-Id: I2aff6297d7e229a056383afe6074c41829b38e2d
The OST prescaler bugfix (7a5130a277) broke runtime switching
between 1.0V and 2.0V modes. The 1ms delay after shutting down
the DAC isn't long enough to reset it, so it gets stuck in the
power mode assigned at boot. Change the delay back to 4ms, the
effective value prior to the OST bugfix.
Change-Id: Ic4583d1a6fa82540062aa185386f14bbf785a3f4
use si4700_read() instead of si4700_read_reg() to make it clear we are
not interested in the register itself but in the cache update. Also, a
tiny bit more efficient as we save a function call and don't request a
return value we don't use anyhow.
Change-Id: Ibbb66fd9e5ea748ba11ac3c2a0570f5219b72637
Commit 0c4f89370d ("[2/4] get rid of HAVE_LCD_CHARCELLS") missed a
closing brace which disabled the above topic in my Sansa Clip+ manual.
Change-Id: Ic7a104757f258a37628645389dbfa1b6c8499415
This controls the playback volume, which is not useful for
the M3K because it's impossible to play back and record at
the same time.
Change-Id: I5b0931c22b484f3ff6441d6c88079f18ec70f7f8
Recording works now, although I'm sure there will be a few
things that need fine-tuning. A major issue is that writing
to the SD card creates noticable interference, which happens
on the original firmware too but seems worse under Rockbox.
(Since Rockbox waits until RAM fills up before writing data,
the interference will only be heard on >50 MiB recordings.)
Change-Id: I5561dd9668c3bdd34e92f34ef50848aef8c0b7eb
Large embedded album art can cause pauses during
playback or when skipping between tracks, especially
on older devices, but embedded art is currently loaded
even when separately stored smaller image files would be
available.
A workaround is to remove large album art from the
metadata of files.
This now adds a setting to either turn off loading of
album art completely, or to prefer loading the album art
from a separate image file and thus ignore the embedded
versions.
Change-Id: I22fb581abf56072e35e6c29d72e553747ec1a96a
The temporary buffer used during database commit did not
have any buflib callbacks set, which allows it to be moved
by buflib at any time. The code is not prepared to deal
with this, so things break horribly if anything tries to
allocate during the commit.
The solution is to pass dummy callbacks to prevent the
buffer from being moved. I expect this may create other
issues since the commit uses up all available RAM, but
at least things won't get silently corrupted anymore.
Change-Id: I3183aaee58c94bfbaf4e24424030b8be6e341d22
Rewrite copy_buffer_mono_* functions for correctness.
Bad pointer arithmetic in copy_buffer_mono_l produced
wrong results, or panics on archs which can't handle
the unaligned pointer.
None of the functions handled zero size copies properly
though this probably wasn't an issue in practice.
Change-Id: I81c894e1b8a3440cb409092bec07fe3778a78959
Remove the use of constants and ifdefs in favor of a
single enum and build the menu with a counter. This
simplifies the source and optimizes to the same code.
Change-Id: Ib07f0634ac8f663452c3e6e3c3d92fb6da1a1b4c
There were some hardcoded branches handling left/right gain for line-in
or FM radio inputs. If the target only has a microphone, these bits are
useless and cause compile errors due to missing audiohw settings, etc.
This patch #ifdef's them out.
Change-Id: If6a6918b2fabb256261c84651803bbf44deacb1a
As detailed in the <Low Power Mode> section of the AK4376A
datasheet, the amp should be powered down before switching
power modes (or to a sample rate <= 12 KHz).
Change-Id: I3ab0a21c78a3ad2bb418b64c916f7dbe2a843efa
Define proper symbolic constants for power mode. Also allow
targets to define the default power mode setting.
Change-Id: Ia07cf854dce47d0a6aa88e067471f1ff9fbc45fb
This action has never been used since its introduction
in 2006. There's no real need for it, as it's possible
to reset settings from the context menu.
Change-Id: I6b357ad1a2e19a9b631ee3055e158492570479e3
Remove the battery power ADC since it's not used right now,
and seems to fluctuate too rapidly to be of much use.
Change-Id: If115e4e3ce14d4c18ce899f5a889f7f99ab66489
This caused LCD problems on the ErosQ, where the screen would
go white until being put through a sleep/wake cycle. The exact
reason for this isn't obvious, but the problem didn't exist
prior to the AXP driver rewrite.
The two dependent changes,
42999913ba - x1000: Increase USB current limit to 500 mA at all times
90dd2f84a9 - x1000: Correctly limit USB charging current
ended up bringing the USB charging situation back to where it
was prior to the rewrite, so the cleanest option is to revert
the whole lot.
This reverts commit 42999913ba.
This reverts commit 90dd2f84a9.
This reverts commit 2d89143962.
Change-Id: I1cff2bfdd1b189df14bcf8cce42db725caa470d7
Don't disable grayscale overlay, don't show "resize" messages
between frames and and don't clear display unless actually
necessary
Change-Id: I9f501d8280ce0c8f26f4345088d805d1b84cf143
lcd_update was called while the grayscale overlay was running
regression, apparently introduced by 0ceaff2
(only reproducible on target, not in Simulator)
Change-Id: Ife0ef359e19a03a6dc033070a11ae5843ee555e6
Since we manually do it later, syncing after every
file is unnecessary and can make the audio
queue overflow
Change-Id: Ia7ab6ee345b25a453c56f48ed0d330b04da6da94
make every item in a selection scroll when no columns are selected
otherwise title & currently selected column will be the only scrolling lines
Change-Id: I3bab480f47997b89a01563a69dc68e6633152cf5
Prev/next buttons on iPods or Fiio M3k can now
be used to select another album without having to
return to the albums view first. Scroll wheel/strip
handles scrolling up and down in the track list
as before.
Other targets probably have the necessary
buttons for this, so the keymap can be extended
in the future (same goes for alphabetic browsing)
Also prevents queue overflow and handles
failure case for track list tagcache retrieval.
Change-Id: Ic8ff4471e1583d1ab1f7d16911b15705a7f60aca
When tagcache or storage are busy, it can
take a few seconds for the list to appear.
Meanwhile, the screen used to be either blank
or the cover was left suspended in mid-animation,
if the animation was skipped.
Change-Id: I655320c4f92ff496834e252cc77ece47723a8677
