Interrupts version is cause of freeze on USB extraction.
Also non-interrupts version much simpler and faster.
Change-Id: I30a2993cdcaa85abfba77ca06bfacd5b6b4353e2
Fix log file corruption if we have new messages at dumping log to file. Comment
removed as it incorrect. We store all messages in direct order (last message at
end of file).
Change-Id: I4acfa8a0935cc41a889e08f6bc42974fefd1ade2
Some targets can only use storage DMA if the memory location is storage
aligned. The required alignment can be more strict than word alignment,
which was used previously. This change ensures that aligned transfers
in test_disk can use DMA.
Change-Id: I605b4d57f9e9c04920587017032f14449645693a
This changes JPEG fill and invalid byte handling to be like
mozjpeg, and bases entropy data start on SOS marker location.
Thanks to Stefan Waldmann and Dean Tersigni for reporting.
Change-Id: I3c79cc6ac8d714fdc75c12b57ba427d611c99519
Chaange-Id: Ibc7c17d38d5be63642bdaf6adfd6acc2a6cf4450
Voltage is reduced when the CPU is unboosted, resulting in a large
reduction in power consumption. In analogy with the AMSv1 voltage
scaling code (currently disabled due to problems with SD cards),
I have defined a config file option to enable/disable it.
Change-Id: Ia89c31ec06dd012354b4d53435e7b5b36243b206
We need additional delay since ascodec_write_pmu() working faster in
non-interrupts version of I2C2.
Change-Id: If4af3e42b3c8e8214baa36e54353b8adb527552d
After setting new PCLK (96 Mhz) we have too high DBOP (96 / 16 = 6 MHz).
According to datasheet DBOP should be maximum 4 MHz.
Change-Id: I1cbec054f41a76a6f18eadccb902c5b174ad6e3a
Qt 5.6 on OS X requires targeting at least OS X 10.7, while for earlier
versions we can still target 10.6. Handle this case and inform the user about
the used target version.
Change-Id: I78e426037e2966241ab9a63105e04e7366b469ed
MPProcessors has been deprecated with 10.7. When targeting 10.7 (required when
building with Qt 5.6 on OS X) this causes a warning. Use Gestalt instead
(Gestalt has been deprecated with 10.8, but when targeting 10.7 this doesn't
cause a warning, and Gestalt is used for other values as well).
Change-Id: Iaf82147ad47115e228f5c08f8198a6a7e92102a3
Current clang on OS X suggests placing parens so add them
(-Wbitwise-op-parentheses enabled by default).
Change-Id: I31b49386aa184fe27f72f7f58909b97524d96f44
C++11 requires a space between literal and identifier. When compiling with Qt
5.6 on OS X C++11 support is automatically enabled, causing an error due to
this.
Change-Id: Ifbedc894a3cef23fc67ed1da75558e92e44d1077
We should check sd_wait_for_tran_state() after transfering to prevent data
timeout error. Also we should disable DMA channel manually.
Should be used with g#1270, without it freezes still can occur on data
transfering.
Change-Id: If8c6e5547ab14d66237bccf65f83affc7a346e5e
With current setting we spend few minutes for reading one sector if we have
data timeout error. With new setting system (linux) show error after ~10 seconds.
Change-Id: Id3922acb2ea146c6ea2f89f26206df9488e6ee4e
I misunderstood the code a bit when I committed b58b9c2. The
read_char_no_whitespace() probably have to be done.
Change-Id: I024420149a04dbeed4d714795282bb7f88a8e1da
Note that the error checking is probably useful if done correctly,
but I have no way to test this, so just removing the offending code
is the only way forward. Thanks to the fairly creative bug, the code
did nothing at all anyway.
Change-Id: Ifeef57202f31e842ca1befa331f8b34e1c76757c
After commit e9497db the switch() in ata_smart_get_attr_name() is no
longer optimized by the compiler, ata_smart_get_attr_rawfmt() is also
updated to prevent that future additions will cause the same problem.
Change-Id: Ib0d6482331f567896720589a5a2d93628f2d8f3d
This should allow FireWire charging to work on these devices.
It also adds charging state detection on the iPod Classic.
(cherry picked from commit fa86fec4fb)
On Classic (and probably Nano 2G), it seems that the 100/500mA limit
applies only to USB chargers, when FW is connected it supplies all the
power (even if USB is also connected) and USB current limit does not
affect to FW charging, therefore the limit is only set when USB is
connected.
Change-Id: I7c6bab1b6a0f295367999c45faeda6085c3fb091
Signed-off-by: Cástor Muñoz <cmvidal@gmail.com>
Read/write buffers who are aligned to 16 were not re-aligned to 32 as
it should be. Althrough USB storage and buffering are always passing
buffers aligned to 32, a few unaligned buffers are being received from
other tasks, so this patch could solve some rare random issues.
Also fixes DMA configuration for HDDs that support any MDMA mode but
only UDMA0 (probably will never happen).
Change-Id: I00219ae434205681c69293fc563e0526224c9adf
- Add description for attributes supported by Samsung HS081HA (80Gb)
and HS161JQ (CEATA 160Gb).
- Show error code when ata_read_smart() fails.
Change-Id: I618cc4f37d139fc90f596e2cf3a751346b27deb6
After previous commit 0b6647f2e9
this alignment should not be needed, but not sure at all, so it
is aligned to cache line length for safety.
Change-Id: I5b2b9a30c913d2a609acc1bdf30bdec6811a2551
Align USB_DEVBSS buffers to 32 (as other USB drivers are doing), this
could solve rare random memory corruption issues on iPod Classic.
Change-Id: I86a28e10415eabedab7bf4a534530900284f81e5
Some old code made the assumption that CONFIG_CPU == AS3525v2 if and only if
HAVE_AS3543, which is not true on targets like the Samsung YP-R0. This fixes
several issues on such targets like a huge volume gap between -39dB and -40dB
and a volume artificially capped at -72dB instead of -82dB.
Change-Id: Ib1c883ac593c0c3ce5e2bf4eb408924ce5f5ad93
The parser would simply ignore unknown elements or attributes, which is bad
on many levels. Now any unknown tag will trigger a fatal error.
Change-Id: I32eead8e96c1567241cf2a565d9e20e62877c14d
