fiio m3k native is currently the only player with
defined buttons different from the standard
mapping.
This allows the user to use the keyremap plugin
to specify differing keymaps for their device in the locked state
Change-Id: Ie0b447bba0d5978e8d23fed423df30c794afc6f9
Add context flags to keyremap
CONTEXT_LOCKED
CONTEXT_REMOTE
CONTEXT_REMOTE_LOCKED
--CONTEXT_PLUGIN-- Removed -- Plugins need a custom action list
supplied and a method of supplying them
Change-Id: I5201d275ad0ab6130c2d05d5afb0c450f5c1746c
ToggleMode is remapped to BUTTON_SELECT
Reset is remapped to Long BUTTON_HOME or Long BUTTON_SELECT (avoids accidental reset by pressing BUTTON_SELECT)
Change-Id: I6fc4050c66db2d7db7ec899f9c83b70754fef9df
Offers a quick way of switching to the Shortcuts Menu
by pressing the 'context menu' button while QuickScreen
is active (e.g. long press Select on iPods and some other
players)
Change-Id: I38292c7070cf093a81e1db688809b1f0d6a8764a
According to the on screen instructions, any other button
should mean No.
More importantly, in my experience at least, the Select
"button", since it is touch-activated, can sometimes be
pressed by accident, especially when a warning screen
is displayed as a result of pressing that same button.
Change-Id: Ieeadfa8018b5df99605297bc47948a181c22dab4
Recording works now, although I'm sure there will be a few
things that need fine-tuning. A major issue is that writing
to the SD card creates noticable interference, which happens
on the original firmware too but seems worse under Rockbox.
(Since Rockbox waits until RAM fills up before writing data,
the interference will only be heard on >50 MiB recordings.)
Change-Id: I5561dd9668c3bdd34e92f34ef50848aef8c0b7eb
This action has never been used since its introduction
in 2006. There's no real need for it, as it's possible
to reset settings from the context menu.
Change-Id: I6b357ad1a2e19a9b631ee3055e158492570479e3
The yes/no keymap does not fall back to the Standard
keymapping, so keys other than Back and Power do not
cancel, though the prompt says "any other key".
Adding fallback to standard context as well as explicit
Left, Right, Vol+ and Vol- as they're not present in
the standard context.
Tested on physical m3k
Change-Id: I06409bad8dcde6586e1bf773309ef0ce464cc060
Add fallback to CONTEXT_STD and add explicit Play button cancel -
Play button is not present in standard context, so it won't do
anything if unknown actions are ignored.
tested on ipod simulator
Change-Id: Ic259fa97b6195ebbc66fcfae31265cc7aeefa421
- Enable repeat for prev/next keys
- Provide a way to access the context menu using buttons
- Update the manual
Change-Id: I53a7474cc64f915851175aea0695229c581fd8a6
It has only a couple GB of onboard flash storage with no storage
driver in Rockbox. It hasn't seen any meaningful development since
its initial commit, it's not on the build farm, and the bootloader
build is broken by other refactoring.
Change-Id: Idd9e3c46fac9b96f416ce444182f97a50770e747
Seems to fix the unintuitive / inaccurate behavior of this screen.
Rejigger the generic touchscreen keymap because the 3x3 buttons are
no longer used. Also map physical keys for yes/no on the Q1.
Change-Id: I2ed633896b87030fa654d47d9d02929b849495da
- Audio playback works
- Touchscreen and buttons work
- Bootloader works and is capable of dual boot
- Plugins are working
- Cabbiev2 theme has been ported
- Stable for general usage
Thanks to Marc Aarts for porting Cabbiev2 and plugin bitmaps.
There's a few minor known issues:
- Bootloader must be installed manually using 'usbboot' as there is
no support in jztool yet.
- Keymaps may be lacking, need further testing and feedback.
- Some plugins may not be fully adapted to the screen size and could
benefit from further tweaking.
- LCD shows abnormal effects under some circumstances: for example,
after viewing a mostly black screen an afterimage appears briefly
when going back to a brightly-lit screen. Sudden power-off without
proper shutdown of the backlight causes a "dissolving" effect.
- CW2015 battery reporting driver is buggy, and disabled for now.
Battery reporting is currently voltage-based using the AXP192.
Change-Id: I635e83f02a880192c5a82cb0861ad3a61c137c3a
Use 32-bit monotime AVR counter for time tracking. Set the time by
adding fixed offset to the counter value. Store the offset in rockbox
directory to make it persistent between reboots.
Do not implement alarm functionality as wakeup is only possible from
sleep and not from complete power off.
Change-Id: I615c7eb4df8ab0619dcbfcff107bc7051a15aace
I accidentally left this in commit 8056b7f, and I think I'm giving
up on this for now - it just gets too complicated in the usb use
case. Revert to BUTTON_PLAY.
Change-Id: I9e392a3d7f2c18f34de54ecbafdb27cdf863b28c
Allows the ACTION_YESNO_ACCEPT action to be set
to a button release by ignoring certain system events.
Moving USB init in main.c to the last thing to prevent
getting stuck in the USB prompt, if enabled.
Also changing ACTION_YESNO_ACCEPT to button release on erosq
Change-Id: I5e7498521a13cb4e840223dd0b9c8633e99093bc
- Add support for skip and seek while the player is locked.
(Thanks to @bahus for the suggestion)
- Fix touch zones because the down button zone ended up being
a lot smaller than expected due to the touchpad's wonkiness.
Also added a visual display of the touchpad to its debug menu.
- Fixes the pictureflow keymap because it was mostly unusable.
Change-Id: Ic0da4f8df3613ff7828ce1cb940ed9e77ada3281
- Move WPS Stop to Power (Hold)
- Add WPS Hotkey to Wheel scroll Fwd/Back
- Add WPS Quickscreen to Play (Hold)
- Add Tree Hotkey to Play (Hold)
Change-Id: Id74622138353521f736c0de1009a354307b108eb
It never worked, and hasn't compiled in something like a decade, Given
the HW capabilities (limited onboard flash, no expandability) there's
really no point in trying to fix/complete it.
Change-Id: I7d175089840396f8891645bd10010d730dd5bfdc
They were never finished, never saw any release ever, and haven't
compiled for the better part of a decade. Given their HW capabilities [1],
they are not worth trying to fix.
[1] 1-2MB RAM, ~256MB onboard flash, no expandability
Change-Id: I7b2a5806d687114c22156bb0458d4a10a9734190
This only required a minor patch to the usb-designware driver due
to DMA requiring physical addresses -- on the X1000, these differ
from virtual addresses so we have to do the usual conversion.
Both the mass storage and HID drivers work, but there are a few
issues so this can't be considered 100% stable yet.
- Mass storage might not be detected properly on insertion,
and USB has to be replugged before it shows up
- HID driver may occasionally panic or hang the machine
Change-Id: Ia3ce7591d5928ec7cbca7953abfef01bdbd873ef
Text entry keymap was almost completely backwards, and it was
impossible to submit without adding one last character.
Change-Id: I40a224fe20e228c5e4670dd6583318918c59c827
The ACTION_TREE_WPS (held back button) was a part of the mainmenu context, moved to list context so it would work in Files and Database as well for consistency.
Change-Id: I3749d7b4fd041db80e81c1a79d30c2c7bdd64829
Back button's ACTION_TREE_WPS state in the mainmenu context causes
a jump back to the main menu root from anywhere in the settings tree.
Changing it to a held button fixes this.
Also changed the ACTION_STD_CANCEL functionality of the back button
in the standard context to be on release, just because I think
it feels better to use.
Also added myself to docs/CREDITS
Change-Id: Ia5892f4d995431abe0616f00fd5cc8368dd750a2
* PREV/NEXT now swapped so they do what is expected in most contexts
* List and setting context retains prior behavior
* Enable the ADC that reads the headset remote and map the keys.
* As ADC-based remote "events" arrive as press/release pairs,
delay the button release.
Change-Id: I22d4eac3bfe1573b50eca795cf377bdafdeb5336
The Q and K have a slightly different case, but the hardware under the
shell is completely identical.
These models are rebadged versions:
* Hifiwalker H2 (== Q)
* AGPTek H3 (== K)
* Surfans F20 (== K)
Other notes:
* Significant improvements in the shared Hiby-platform launcher/loader
* SD card can theoretically be hot-swapped now
* Support external USB mass storage!
* Some consolidation of Hiby-platform targets
* Some consolidation of plugin keymaps
Todo/known issues:
* Keymaps need to be gone over properly
* Convert to HAVE_SCROLLWHEEL?
Change-Id: I5a8a4f22c38a5b69392ca7c0a8ad8c4e07d9523c
Most credit goes to: Roman Skylarov
Additional integration and refactoring by myself.
*** COMPLETELY UNTESTED ***
Change-Id: Ia64c36d92e0214c6b15f7a868df286f8113ea27b
It doesn't work properly and interferes with the power button in the keymap.
Rework WPS keymap a bit to make single-tap power emulate lock.
Change-Id: I9d9b9b4adcea3764e6e427f484e051c9bab9d13b
Fixes deficiencies with the button system on the X3
The x3 has an interesting button layout.
Multiple key presses are NOT supported unless
[BUTTON_POWER] is one of the combined keys
As you can imagine this causes problems as the power button takes
precedence in the button system and initiates a shutdown if the
key is held too long
instead of BUTTON_POWER use BUTTON_PWRALT in combination with other keys
IF using as a prerequsite button then BUTTON_POWER should be used
Multiple buttons are emulated by button_read_device but there are a few
caveats to be aware of:
Button Order Matters!
different keys have different priorities, higher priority keys 'overide'
the lower priority keys
VOLUP[7] VOLDN[6] PREV[5] NEXT[4] PLAY[3] OPTION[2] HOME[1]
There will be no true release or repeat events, the user can let off the
button pressed initially and it will still continue to appear to be
pressed as long as the second key is held
Tree scrolling is PLAY+NEXT or PLAY+PREV
Change-Id: I88dfee1c70a6a99659e8227f5becacc50cc43910
