Such targets would previously default to using the configuration for targets with small iram which uses an extra memcpy per block.
This saves 2MHz decoding a 128kbps vorbis file on the Gigabeat S and saves a bit of codec buffer.
Patch from FS#11268, also replaces patch from FS#12147.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29976 a1c6a512-1295-4272-9138-f99709370657
It's not enterly clear what fixed it but it seems to be a combination of
increasing the buffer size and reducing the amount of code run in the callback.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29961 a1c6a512-1295-4272-9138-f99709370657
Introduce a new folder that will hold the original files for various variants
of the Rockbox logo. The "Rb" variant of the icon (used in the Rockbox Utility
icon on Windows) has been missing from svn.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29960 a1c6a512-1295-4272-9138-f99709370657
This event is sent before the audio is routed back to the speaker so we
get the information about the unplugged headphone notably earlier.
Decrease the debouncing of the headphone status from 1s to 0.5s to work
around audio still getting played back via the speaker due to the pause
delay by debouncing. On Android we shouldn't need the debouncing at all.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29957 a1c6a512-1295-4272-9138-f99709370657
Listen to headphone plug events. There are currently two glitches with this:
- Android takes a while until it reports the unplug event, so there will be
some delay until playback gets paused. This is an Android limitation.
- Rockbox debounces headphone state changes for one second. Therefore playback
will shortly be routed to the speaker on unplug until Rockbox does the actual
pause.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29956 a1c6a512-1295-4272-9138-f99709370657
If the screen size specified is wider than higher specify the orientation as
landscape in AndroidManifest.xml. This usually applies to tablets where Rockbox
in portrait mode feels unnatural.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29951 a1c6a512-1295-4272-9138-f99709370657
Some of these were found with http://www.samba.org/junkcode/#findstatic. Changes of note:
* The old MDCT has been removed.
* Makefile.test files that create test programs for libatrac, libcook, and libffmpegFLAC have been removed, as they don't work. My project will have a replacement that works with all codecs.
* I've tried not to remove anything useful. CLIP_TO_15 was removed from libtremor because there's another copy (also commented) in codeclib.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29945 a1c6a512-1295-4272-9138-f99709370657
FS#10992 - make the <Untagged> string translatable):
* The translation was done too early: before the tagnavi format
clauses were checked. This prevented comparisons against
"<Untagged>" when a non-English translation was active.
* The code overwrote the buffer containing the constant string
"<Untagged>" with the translation. This is neither safe nor
necessary: The result pointer simply can be swapped with a pointer
to the translation.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29941 a1c6a512-1295-4272-9138-f99709370657
Codec files are loaded as dynamic libraries. Instead of extracting them from
the packaged libmisc.so and therefore having them present twice on the device
put them into the apk as native libraries. Decreases the size of the installed
Rockbox by the compressed size of the codecs. Also, the extraction on first
Rockbox startup gets notably faster since it's less data to extract.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29940 a1c6a512-1295-4272-9138-f99709370657
The NDK includes swap16 and swap32 macros, Rockbox as well. Use the Rockbox
ones and avoid a macro redefined warning.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29939 a1c6a512-1295-4272-9138-f99709370657
This script is designed to create an icon strip file from svg images. It is
intended for use with the Tango icons. The icons as configured in the script
should be close to the current Tango icon strip file. Requires inkscape and
ImageMagick.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29938 a1c6a512-1295-4272-9138-f99709370657
Since those are created below the build folder but unknown to qmake the
generated Makefile doesn't remove those. Explicitly add appropriate wildcards.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29932 a1c6a512-1295-4272-9138-f99709370657
Put the generated AndroidManifest.xml into the bin subfolder and remove it from
clean list. Avoids problems with cleaning if you're building in the android/
folder. Thanks to kugel for pointing out that people are actually doing that.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29931 a1c6a512-1295-4272-9138-f99709370657
Use the source tree version as versionName string. As result the Android
Settings menu will now show that version instead of a rather unhelpful "1.0".
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29929 a1c6a512-1295-4272-9138-f99709370657
