This is another chip used in newer Surfans F20 units. Like the
Winbond chip, it's a 1-gigabit chip with on-die ECC. Notably it
has an expanded 128-byte OOB area that is only accessible when
on-die ECC is disabled.
Change-Id: I2203918a15c914097f5a6bbe4afa2d3a60dc67f7
This chip is apparently used in some Surfans F20 units, and has
the same geometry as the ATO25D1GA. It has an on-die ECC engine.
Change-Id: I4d37a2455620ce43cec0a9bcbb32c776d1a8eba1
Decouple chip IDs from chips, and allow the chip ID table to list
which read ID method should be used. Use a safe controller setup
during identification instead of using the first chip's parameters.
Change-Id: Ia725959c31b2838f4a3a30e5bb7fa6652ef377ed
The description for arm-linux mentions "Linux-based Sony NWZ", which
is misleading for people who aren't very familiar with the various
targets and history. People setting up toolchains for the first time
for their "traditional" NWZ will overlook the "linux" part (or not
understand what it means) and build the wrong compiler.
Mentioning "older Sony NWZ" may of course not immediately tell those
people which one to pick, but at least they'll know they need to look
things up.
Change-Id: I5743a6427842db7334cff5479291e2137c35ae0c
* added scroll wheel to doom
* added scroll wheel to brickmania
* changed spacerocks to use scroll wheel instead of buttons
Change-Id: I9d6ff0b4c5deea147178f5cd9f96ae435e7b5cd8
Shuffle and Unshuffle commands are not flushed to
disk when control data is updated. The same applies
to Delete and Reset commands, unless HAVE_DIRCACHE
is undefined (see update_control() function in playlist.c)
playlist_resume() discards cached control data.
This resulted in a bug where (e.g.) removed tracks
from the current playlist would reappear if you stopped
and resumed playing immediately afterwards (instead of
restarting in between).
Change-Id: I273f61e823a1d99426a18079b81aa07915620f30
The disk doesn't need to spin up when the
database is in RAM. Results are usually returned
without any noticeable delay, so the splash only
creates distraction.
Change-Id: I04e5b7d2e00f045143dd86e0561091be3d8f9724
I noticed a stack overflow on the Fiio M3K when launching
PictureFlow from the Playlist Viewer after opening a playlist
from the file browser using the context menu's "View" option.
Change-Id: Id87fb59e36518bd7ceb61f886d5759fc3206aadf
'File Browser' hotkeys can now be used while
browsing a playlist.
The manual has been updated to reflect this and
to say that the File Browser hotkey works in
the context of the database as well (existing
behavior)
Change-Id: I51b23e82e0fb00772efdb8784db966d454fb2560
(The playlist viewer has to be re-initialized
after returning from PictureFlow, since they
both use the plugin buffer)
Change-Id: Ib3ef0acec65c88363830c59c8c73e9cdf8b528f0
This seems to be what is provided by the database when length
of path+file name of an entry is larger than MAX_PATH.
Change-Id: Iaf40ce945732a8a8c2e5270a80886dcb537a72be
There is actually no need to parameterize most commands with row
or column cycles, usually the opcode and row/column address width
are linked. When this is not the case we can use raw SFC commands
or define new macros.
Change-Id: I22459d732dc01012e6a8ae026c4fb85495d372b4
Using predefined commands is too inflexible so allow the chip data
to specify I/O commands directly.
Change-Id: Ie8f943914da4b8299678a59b1063c4c6d226e83e
Dumps parts of the standard ONFI info located at page 0x01
of the OTP area to a file for easy copy'n'pasting.
Change-Id: Ie0ba66d27c400737f14deec7c21e9dcb144028a6
Update the uimage reader's bad block handling to treat an ECC
uncorrectable error on the first page of the block as a bad block.
Change-Id: Id3aa7a338fcc36c0e2381063b119efe41f957122
The iPod classic/6G comes with 64MB of RAM. This
brings it in line with the plugin buffer size of some
other targets that have the same amount of RAM,
such as the Fiio M3K, and enables the use of
PictureFlow for users with very large databases.
Change-Id: I1ccae1cacda7a243139f4887f54bd35cc8e501cf
QuaZIP is included in several major Linux distributions and packaging
policies strongly oppose bundling of libraries.
Change-Id: I8d454784dc4b244f4dd8aa18deb3350a29aaab77
Use per-function sections to avoid linking in x1000_boot_linux()
on normal builds, which prevents link errors due to referencing
a non-existent usb_close().
Change-Id: Ied7b233603c49fc856db8445e368675b181e2f1f
Many SPI NAND flash chips have on-die ECC engines that report
ECC status via the status feature register. This code handles
the common case where ECC status is reported with 2 bits: one
bit to indicate if flips were detected & corrected, and another
bit to indicate an uncorrectable error.
Change-Id: I5d587cd960ca9d090d2629e890724a6bc411e70c
Using 'typedef struct' is not in line with the project coding style
and somewhat problematic, so get rid of it here.
Change-Id: Icfe79de72ed82cb7526e9f4e8296ec12084c01ac
Some components have additional ID bytes. Add support for an
optional 2nd device ID byte during the identification routine.
Change-Id: I5bbad73fb57004067c6f13f223f7bf4d43ff7849
If the USB controller is active when we hand over to Linux it'll
often trigger "irq nobody cared" warnings. Disabling the controller
before boot prevents that.
Also move the USB PHY bit workaround from the dualboot cleanup hook
to the main Linux boot function. Mainline kernels don't clear these
bits either.
Change-Id: Ieaf896c3b8c3e58a8c47de5afeb384ae2511a5fa
Define common functions for loading 16/32/64-bit unsigned integers
with big, little, or host endianness, and distinguishing unaligned
and aligned cases.
Unaligned loads are supported generically by default, but this can
be overridden with a more efficient implementation on architectures
which support unaligned loads natively.
Change-Id: I3d826ec1a7646777876366eeece2cbccab60c1fb
USB ask mode is basically a footgun: it can't work on native targets
and doesn't work reliably on hosted ones, and it continually produces
a slow trickle of problems. FS#13317 gives a rundown of the issues.
Removing the setting seems like the best solution for now, since a fix
would be pretty involved.
This partially reverts 60f581e8f5. The USB Mode setting is left in
place so the option can be added back later in a non-buggy way.
Change-Id: Ie01b28dd2ed95a31b509a7834d85bac8eb866098
Updated version of the patch originally by user cockroach
UNTESTED
Ipods?, Iriver H10,
I do not own these players so YMMV
https://www.rockbox.org/tracker/task/13193
Change-Id: I7924837f582cc5c49ee68c186d6822f577f65147
The flash probe mimics the boot ROM's flash read routines and
dumps the manufacturer & device IDs and 16-byte parameter data
to a file on the SD card.
Change-Id: I3d413bd0cc05a9d7f2285b85454420c3e90274e9
