The freescale firmware partitions has a lots of quirks that
need to be dealt with, so do it the proper way.
Change-Id: I8a5bd3fb462a4df143bc6c931057f3ffedd4b3d3
The icoll code now has an IRQ storm detection mechanism which
will prevent the device from hard freezing in case it happen.
Change-Id: I9861238dce61d29af1e48f9c534ec63a7f23465c
Simplified stack unwinder for ARM. This is port of
http://www.mcternan.me.uk/ArmStackUnwinding/
backtrace() is called from UIE() on native targets
and from panicf() on both native and ARM RaaA.
Change-Id: I8e4b3c02490dd60b30aa372fe842d193b8929ce0
Now lcd_framebuffer is the only framebuffer in the system. We still use a ARM-buffered buffer
which serve as an intermediate buffer for copying, to accomodate the requirement of the controller.
We implement lcd_update_rect() properly using this new scheme (this requires two little quirks),
this allows to implement lcd_blit_yuv with the right semantic (bypasses the framebuffer). YUV to RGB
conversion is still done in software but the DCP CSC should be able to do that but the hardware rotation
scheme is not the same as our software so it will require some tricks.
Change-Id: I0752e9c2f1a705d2e6a6010084e1f150965d8370
Core, codecs and plugins link it separately so this gets rid of SOURCES trickery.
Don't build it for hosted targets.
Change-Id: If15ef90e93cd218a4352ae8e89eea95d3122452f
move prototypes to ascodec.h
move code to ascodec*.c
YPR0: use adc-as3514.c instead of duplicating it
TODO: merge as3514.h and ascodec.h ?
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31626 a1c6a512-1295-4272-9138-f99709370657
* Introduce CONFIG_BATTERY_MEASURE define, to allow targets (application)
to break powermgmt.c's assumption about the ability to read battery voltage.
There's now additionally percentage (android) and remaining time measure
(maemo). No measure at all also works (sdl app). If voltage can't be measured,
then battery_level() is king and it'll be used for power_history and runtime
estimation.
* Implement target's API in the simulator, i.e. _battery_voltage(), so it
doesn't need to implement it's own powermgmt.c and other stubs. Now
the sim behaves much more like a native target, although it still
changes the simulated battery voltage quickly,
* Other changes include include renaming battery_adc_voltage() to
_battery_voltage(), for consistency with the new target functions and
making some of the apps code aware that voltage and runtime estimation
is not always available.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31548 a1c6a512-1295-4272-9138-f99709370657
Voltage can be read using as3543 adc (i.e. ascodec api, on this target implemented
via ioctl()). TODO: Look into possibly controlling charging more by re-using
powermgmt-ascodec.c. However, charging seems to be controlled by the kernel,
so may not be needed.
Charger state can be read using /dev/minivet. It allows to differentiate between
wall charger and usb charging, but that's not implemented (is it even worthwhile?)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31470 a1c6a512-1295-4272-9138-f99709370657
This port is a hybrid native/RaaA port. It runs on a embedded linux system,
but is the only application. It therefore can implement lots of stuff that
native targets also implement, while leveraging the underlying linux kernel.
The port is quite advanced. User interface, audio playback, plugins work
mostly fine. Missing is e.g. power mangement and USB (see SamsungYPR0 wiki page).
Included in utils/ypr0tools are scripts and programs required to generate
a patched firmware. The patched firmware has the rootfs modified to load
Rockbox. It includes a early/safe USB mode.
This port needs a new toolchain, one that includes glibc headers and libraries.
rockboxdev.sh can generate it, but e.g. codesourcey and distro packages may
also work.
Most of the initial effort is done by Lorenzo Miori and others (on ABI),
including reverse engineering and patching of the original firmware,
initial drivers, and more. Big thanks to you.
Flyspray: FS#12348
Author: Lorenzo Miori, myself
Merry christmas to ypr0 owners! :)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31415 a1c6a512-1295-4272-9138-f99709370657
The new menu is very helpful on RaaA, but also shown in the sim. It shows
the process cpu usage, process' time stats (user,sys,real) and the cpu
frequency stats.
It uses a thread to sample the data, however the thread is not created
until the menu is visited for the first time.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31364 a1c6a512-1295-4272-9138-f99709370657
Massage the way it interfaces a bit to make things more flexible.
The chroma_buf scheme on Sansa Connect and Creative ZVx calling the
lcd_write_yuv420_lines implementation in lcd-as-memframe.S with five params
with a chroma buffer that the function can't use wouldn't work anyway so just
have them use the stock implementation (really, how was that working?).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31335 a1c6a512-1295-4272-9138-f99709370657
For this commit: Sansa e200v1, Gigabeat F, Gigabeat S and Mini2440 are
changed over. Quite a number of other targets probably can be as well.
General LCD code is moved out of the target drivers into
drivers/lcd-memframe.c.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31311 a1c6a512-1295-4272-9138-f99709370657
Only done for files shared across multiple targets
Note that several targets share the same CONFIG_LCD but use completely
different drivers
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31285 a1c6a512-1295-4272-9138-f99709370657
add a comment about why we don't return 0 when no tuner was detected
build the file on all as3525v2 targets
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31284 a1c6a512-1295-4272-9138-f99709370657
pcf5060*.c has the same name than the RTC driver, but it's not the RTC driver itself
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31280 a1c6a512-1295-4272-9138-f99709370657
tuner and rtcs are already included by CONFIG_TUNER and CONFIG_RTC
It's not possible to remove all duplicates, because some models must support 2 RTCs.
a bitfield could be used instead, like is done for CONFIG_TUNER
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31279 a1c6a512-1295-4272-9138-f99709370657
Merge clipv1/clipv2 code since they use the same 3x3 matrix
clipzip keyscan buttons now work in bootloader
clipplus untouched (no matrix)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31235 a1c6a512-1295-4272-9138-f99709370657
Included are drivers for buttons, backlight, lcd, audio and storage.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@31000 a1c6a512-1295-4272-9138-f99709370657
Origional implementation by Robert Keevil with contributions from Frederik Vestre, Stoyan Stratev, Craig Elliott, Michael Sparmann, Thomas Schott, Rosso Maltese, and syncs from a bunch of other people!
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30995 a1c6a512-1295-4272-9138-f99709370657
The buflib memory allocator is handle based and can free and
compact, move or resize memory on demand. This allows to effeciently
allocate memory dynamically without an MMU, by avoiding fragmentation
through memory compaction.
This patch adds the buflib library to the core, along with
convinience wrappers to omit the context parameter. Compaction is
not yet enabled, but will be in a later patch. Therefore, this acts as a
replacement for buffer_alloc/buffer_get_buffer() with the benifit of a debug
menu.
See buflib.h for some API documentation.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30380 a1c6a512-1295-4272-9138-f99709370657
Also set up a callback for the battery capacity setting (for all players) so changes take effect without having to reboot.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30170 a1c6a512-1295-4272-9138-f99709370657
bsearch() is a general purpose binary search function for arrays.
It's supposedly faster than looping over arrays.
The array needs to be sorted in ascending order under the provided
comparison function. If the key and array element are of the same kind,
then the same compare function can be used for qsort() and bsearch().
Code taken from glibc.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@30155 a1c6a512-1295-4272-9138-f99709370657
Since the bootloader currently always fails at storage point (unimplemented), always enter touchpad debug screen and power off which pressing power button.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29859 a1c6a512-1295-4272-9138-f99709370657
I tried to move the #ifdefs and the code
in firmware/powermgmt.c around and it was still
a big mess for hosted applications (RaaA/sim builds).
Create our own "power" thread as recently discussed on IRC.
Fixes the sleep timer for RaaA.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29501 a1c6a512-1295-4272-9138-f99709370657
This replaces SDL threads with real cooperative threads, which are less cpu intensive and allow priority scheduling.
The backend for context switching is dependant on the host (sigaltstack/longjmp on Unix, Fibers on Windows).
configure has options to force or disallow SDL threads.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29327 a1c6a512-1295-4272-9138-f99709370657
Adds Nokia N900, N810 and N800 support.
Features:
- Introduce maemo specific platform defines
- Play audio in silent mode
- Stop playback on incoming calls
- Battery level readout
- Bluetooth headset support
- Save CPU by disabling screen updates if the display
is off or the app doesn't have input focus
- N900: GStreamer audio backend
Kudos to kugel for the code review.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29248 a1c6a512-1295-4272-9138-f99709370657
Major known issues:
- No bootloader yet
- No support for the first-generation 160GB CE-ATA hard disk drive yet
- Audio playback is slow, only FLAC seems to reach realtime
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28953 a1c6a512-1295-4272-9138-f99709370657
* For some reason, the polling methid is much more inefficient than I thought. According to htop it caused up to 15% CPU load on some phones (e.g. Galaxy S).
The event based causes no CPU load.
Rockbox' idle CPU load is now back to 0%, while it was previously dominated by polling the call state.
* Also stop on outgoing calls (no need to explicitely pause for making a call anymore).
* Factor out the detection mechanism to separate files.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28564 a1c6a512-1295-4272-9138-f99709370657
Exclude compilation of firmware/debug.c for hosted platforms.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@28125 a1c6a512-1295-4272-9138-f99709370657
Instead implement a bit of battery monitoring. Currently it only fetches the battery level (in %) every 30s,
but it could do more like battery status, charger connected, voltage...
Theoretically, we could also exit/quit after some time of inactivity too
(perhaps not a bad idea since Rockbox puts a slight but still non-zero CPU load even if doing nothing).
Ironically, Rockbox is now the only way to get the exact battery level (at least I haven't found anything yet) on my phone :-)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27974 a1c6a512-1295-4272-9138-f99709370657
Use host's functions for file i/o directly (open(), close() ,etc.), not the sim_* variants.
Some dir functions need to be wrapped still because we need to cache the parents dir's path (host's dirent doesn't let us know).
For the same reason (incompatibility) with host's dirent) detach some members from Rockbox' dirent struct and put it into an extra one,
the values can be retrieved via the new dir_get_info().
Get rid of the sim_ prefix for sleep as well and change the signature to unix sleep().
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27968 a1c6a512-1295-4272-9138-f99709370657
It's a used by codec/plugin loading and vastly reduces code duplication. It's also a step forward in getting rid of libuisimulator in the application ports.
Apparently sh needs linker symbols prefixed with _ even if they're referenced without from C code.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27902 a1c6a512-1295-4272-9138-f99709370657
I don't understand the build error at all, plugin_bss_start is clearly defined in plugin.lds
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27901 a1c6a512-1295-4272-9138-f99709370657
It's a used by codec/plugin loading and vastly reduces code duplication. It's also a step forward in getting rid of libuisimulator in the application ports.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27900 a1c6a512-1295-4272-9138-f99709370657
* Forward Java KeyEvents to C layer and translate them to Rockbox BUTTON_*.
* Add a basic Android keymap
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27832 a1c6a512-1295-4272-9138-f99709370657
Android can now be built with CPU_ARM defined
Needs investigation (and test_codec) to see if/how this helps
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27684 a1c6a512-1295-4272-9138-f99709370657
General state is: Rockbox is usable (plays music, saves configuration, touchscreen works too).
Problems:
- Playing music in the background (i.e. when switching to another app) doesn't work reliably, but I'm working on that now.
- no cabbiev2 (only some preliminary files for it), no other default theme.
- screen flickers sometimes if the updates are too frequent
- no multi screen apk/package
- strange behavior when a phone call comes in
The java files (and the eclipse project) resides in android/, which is also supposed to be the build folder.
I've put a small README in there for instructions. There are some steps needed after the make part, which are described there,
and which eclipse mostly handles. But there ought to be some script/makefile rules which do that instead in the future.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27668 a1c6a512-1295-4272-9138-f99709370657
For RaaA it evaluates user paths at runtime. For everything but codecs/plugins it will give the path under $HOME/.config/rockbox.org if write access is needed or if the file/folder in question exists there (otherwise it gives /usr/local/share/rockbox).
This allows for installing themes under $HOME as well as having config.cfg and other important files there while installing the application (and default themes) under /usr/local.
On the DAPs it's a no-op, returing /.rockbox directly.
Not converted to use get_user_file_path() are plugins themselves, because RaaA doesn't build plugins yet.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27656 a1c6a512-1295-4272-9138-f99709370657
It still works mostly like the simulator. There's also some minor left overs from the sim, but it does not define SIMULATOR.
It installs into the current (build) dir, and you need to run it with '--root .' (because it looks for ./.rockbox and not ./simdisk/rockbox) as options. That's one of the few kludges left that should be resolved soon'ish.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27310 a1c6a512-1295-4272-9138-f99709370657
The simulator defines PLATFORM_HOSTED, as RaaA will do (RaaA will not define SIMULATOR).
The new define is to (de-)select code to compile on hosted platforms generally.
Should be no functional change to targets or the simulator.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27019 a1c6a512-1295-4272-9138-f99709370657
Reserve 1MB of DRAM for loading rockbox and use the rest as BSS
Write sdram setup in assembler and move it to a separate file, together
with MMU init code
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26926 a1c6a512-1295-4272-9138-f99709370657
Charge using 150mA current like the OF to charge faster
Edit clipv2 charging curve with 150mA
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26227 a1c6a512-1295-4272-9138-f99709370657
GPIO direction needs only to be set at init
both functions are now one liners so make them static inline
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26218 a1c6a512-1295-4272-9138-f99709370657
build it on fuzev2 and clipv2 too, it should be the same controller
as3525v1 file is only build for CONFIG_USBOTG == USBOTG_AS3525, no need
to check for it in the .c file
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26142 a1c6a512-1295-4272-9138-f99709370657
- Refactor the program startup. main() is now in main.c like on target, and the implicit application thread will now act as our main thread (previously a separate one was created for this in thread initialization).
This is part of Rockbox as an application and is the first step to make an application port from the uisimulator. In a further step the sim bits from the sdl build will be separated out.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26065 a1c6a512-1295-4272-9138-f99709370657
This makes it possible to move the simulator code into the target tree (for Rockbox as an application).
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26019 a1c6a512-1295-4272-9138-f99709370657
This is to a) to cleanup firmware/common and firmware/include a bit, but also b) for Rockbox as an application which should use the host system's c library and headers, separating makes it easy to exclude our files from the build.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25850 a1c6a512-1295-4272-9138-f99709370657
- Move diacritic.c to firmware/common
- The function is_diacritic returns bool now
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25526 a1c6a512-1295-4272-9138-f99709370657
Lots of the changes are due to changing storage_(read|write)sectors() from macros to wrapper functions. This means that they have to be called with IF_MD2(drive,) again.
Flyspray: FS#11167
Author: Frank Gevaerts
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25459 a1c6a512-1295-4272-9138-f99709370657
We can write to DBOP_DOUT in 8 bits mode : bits 7..0 are mapped to the
LCD, not bits 15..12 and 3..0 like on Clipv1
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25455 a1c6a512-1295-4272-9138-f99709370657
Move scrollwheel parsing function into separate file as it's reused.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25425 a1c6a512-1295-4272-9138-f99709370657
- buttonlight works
- backlight turns on (quite weak though and no brightness adjustment/backlight off functional)
- don't share drivers with e200v2/fuzev1 for now as it's not entirely clear how dbop plays into this
- deactivte scrollwheel as it's messing up the timer setup in kernel-as3525.c indicating the dbop input reading doesn't work well
- still no working bootloader/no lcd or buttons
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25225 a1c6a512-1295-4272-9138-f99709370657
Compilation shows a warning for the first argument of the lcd_bitmap() call in show_logo().
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24911 a1c6a512-1295-4272-9138-f99709370657
Now making the Fuzev2 bootloader build should be pretty easy
TODO:
- write button driver (FlynDice found all buttons already)
- find button light
- decide if lcd-ssd1303.c must be modified for Clip+ using SSP or forked
- check if backlight code works (I copied Clipv2 code)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24520 a1c6a512-1295-4272-9138-f99709370657
Select it based on as3535/as3525v2 so Clip+/Fuzev2 will be able to use
it too
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24222 a1c6a512-1295-4272-9138-f99709370657
This gets rid of LCD glitches on Sansa Fuze, and now LCD transfers can
get interrupted by button reading
Flyspray: FS #10603
Author: Bertrik Sikken
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@24192 a1c6a512-1295-4272-9138-f99709370657
