Using a length 1 char array to point to the name buffer triggers
a -Warray-bounds warning from GCC when fortified strcpy is used.
This type of construct isn't safe in general -- if the compiler
makes assumptions based on the array bound it can create subtle
bugs when accessing the array out of bounds.
Instead, add a function get_block_name() which returns a pointer
to the name field by casting. This suppresses the warning and it
should be a bit more portable.
Change-Id: I25d4f46f799022ad0ec23bef0218f7595cc741ea
These don't have any users and there is already another way to
print blocks (which is actually used by the debug menu).
Change-Id: Ic6a4f874c6499c42bc046e8af3e4aaddc9e68276
If we don't check or generate CRCs then the CRC field can be left
out of the header, which reduces buflib overhead slightly.
Change-Id: I08b4cf77a701d8f6da453e019a0373d858a79ae4
Move CRC checking and updating behind a paranoia bit, like the
other checks, so it can be enabled and disabled.
Change-Id: Icff66c842cbd5af2d99aa91e6c40447a64e6d4b2
Handle checks ensure that the data in the handle table points
within buflib memory and checks handle entry pointers in block
headers before dereferencing them.
Change-Id: Ic16f1b81c1a0ea63c0e7f48d87938293b75c2419
Tighten up checking by adding length checks to loops which
ensure the iteration stays within bounds. Check is disabled
by default and can be enabled using a BUFLIB_PARANOIA bit.
Change-Id: I35e911e0878797d5ebf732be548ca659f6910fe0
Buflib is written with a lot of hardcoded offsets to header fields,
arbitrary pointer arithmetic, and similar but not quite duplicated
code, making maintenance a nightmare.
Most of the pointer arithmetic involving header fields is replaced
by indexing from two well-defined pointers, the block start and end
pointers. The start pointer points to the first header field, and
he end pointer is one past the end of the header.
Hardcoded field indices are replaced by two enums. Forward indices
(fidx_XXX) are used to access fields from a block start pointer and
negated backward indices (-bidx_XXX) are used to index from a block
end pointer. There is no overlap between the indices because of the
variable length name field in the middle of the header. The length
of the fixed fields in the block header is now a #define'd constant
rather than being open coded.
There is now a function to acquire the block end pointer from the
user data pointer (ie. the pointer stored in the handle table). The
old code was not consistent in this; some functions would handle a
non-aligned user pointer, which may occur as a result of shrinking,
while other uses just assumed the user pointer was aligned.
Block CRC calculations have also been factored out to a function
that accepts block start and end pointers.
Change-Id: I6a7e8a8c58aec6c6eaf0e5021400032d8e5f841e
The block header has a variable length due to the embedded name.
The name length is stored at the back of the header after the
name, in order to allow finding the start of the header if only
the user data pointer is known (eg. from the handle table).
The name length is actually not interesting in itself; storing
the total length of the block header instead is marginally more
efficient, saving one addition in handle_to_block().
Instead the extra arithmetic must be done by buflib_get_name(),
which is a much less common operation than handle_to_block().
Change-Id: Ia339a1d2f556a11a49deae0871203e70548bd234
The way it iterated over the handle table is unsafe if *every*
handle is free, leading to an out of bounds access.
This is a contrived example, but the bug can be triggered by
making several allocations, freeing them out of order so that
the handle table remains uncompacted, and then triggering a
compaction using buflib_alloc_maximum().
Change-Id: I879e2f0b223e6ca596769610ac46f4edf1107f5c
It isn't obvious why the "handle->val = -1" at the end of handle_alloc
is needed so add an explanatory comment. But "handle->val = 1" prior to
calling handle_free is simply a dead store.
Change-Id: I9ab4e96e87e940cfd1a2ed56f089287821669c73
Since we're scanning the handle table for the first free slot,
we know none of the scanned slots are free. Use that knowledge
to update first_free_handle and avoid rescanning filled slots
again when the next handle is allocated.
Change-Id: I457372f66c231168cfffa7e905d1e9fb80002f5f
Use the standard IS_ALIGNED macro and check alignment against
sizeof(buflib_data), as it can be greater than 4 bytes if we're
on a 64-bit platform (eg. simulator).
Change-Id: I15110937d1f2978e733d169050de9531fe218214
Exiting the loop implies next_block == block, so remove that check.
The check ret < block is false only if block is the first block, which
can be checked before the loop, saving a few cycles in that case.
Change-Id: Id493b5259a23a35a70b09dfe4bc4eacaf420760c
This appears to be a bug in GCC 12 due to more aggressive -Waddress
warnings. According to the GCC documentation, the warning should be
suppressed because the "problem" code is coming from a macro, but it
doesn't happen for cases like "if(!SKINOFFSETTOPTR(...))" where the
macro is negated.
Assigning the result of SKINOFFSETTOPTR() to a temporary and checking
that suppresses the warning.
Change-Id: Ia37a1e06a454d29032bb8128a2f059b149ea2b83
This is another chip used in newer Surfans F20 units. Like the
Winbond chip, it's a 1-gigabit chip with on-die ECC. Notably it
has an expanded 128-byte OOB area that is only accessible when
on-die ECC is disabled.
Change-Id: I2203918a15c914097f5a6bbe4afa2d3a60dc67f7
This chip is apparently used in some Surfans F20 units, and has
the same geometry as the ATO25D1GA. It has an on-die ECC engine.
Change-Id: I4d37a2455620ce43cec0a9bcbb32c776d1a8eba1
Decouple chip IDs from chips, and allow the chip ID table to list
which read ID method should be used. Use a safe controller setup
during identification instead of using the first chip's parameters.
Change-Id: Ia725959c31b2838f4a3a30e5bb7fa6652ef377ed
The description for arm-linux mentions "Linux-based Sony NWZ", which
is misleading for people who aren't very familiar with the various
targets and history. People setting up toolchains for the first time
for their "traditional" NWZ will overlook the "linux" part (or not
understand what it means) and build the wrong compiler.
Mentioning "older Sony NWZ" may of course not immediately tell those
people which one to pick, but at least they'll know they need to look
things up.
Change-Id: I5743a6427842db7334cff5479291e2137c35ae0c
* added scroll wheel to doom
* added scroll wheel to brickmania
* changed spacerocks to use scroll wheel instead of buttons
Change-Id: I9d6ff0b4c5deea147178f5cd9f96ae435e7b5cd8
Shuffle and Unshuffle commands are not flushed to
disk when control data is updated. The same applies
to Delete and Reset commands, unless HAVE_DIRCACHE
is undefined (see update_control() function in playlist.c)
playlist_resume() discards cached control data.
This resulted in a bug where (e.g.) removed tracks
from the current playlist would reappear if you stopped
and resumed playing immediately afterwards (instead of
restarting in between).
Change-Id: I273f61e823a1d99426a18079b81aa07915620f30
The disk doesn't need to spin up when the
database is in RAM. Results are usually returned
without any noticeable delay, so the splash only
creates distraction.
Change-Id: I04e5b7d2e00f045143dd86e0561091be3d8f9724
I noticed a stack overflow on the Fiio M3K when launching
PictureFlow from the Playlist Viewer after opening a playlist
from the file browser using the context menu's "View" option.
Change-Id: Id87fb59e36518bd7ceb61f886d5759fc3206aadf
'File Browser' hotkeys can now be used while
browsing a playlist.
The manual has been updated to reflect this and
to say that the File Browser hotkey works in
the context of the database as well (existing
behavior)
Change-Id: I51b23e82e0fb00772efdb8784db966d454fb2560
(The playlist viewer has to be re-initialized
after returning from PictureFlow, since they
both use the plugin buffer)
Change-Id: Ib3ef0acec65c88363830c59c8c73e9cdf8b528f0
This seems to be what is provided by the database when length
of path+file name of an entry is larger than MAX_PATH.
Change-Id: Iaf40ce945732a8a8c2e5270a80886dcb537a72be
There is actually no need to parameterize most commands with row
or column cycles, usually the opcode and row/column address width
are linked. When this is not the case we can use raw SFC commands
or define new macros.
Change-Id: I22459d732dc01012e6a8ae026c4fb85495d372b4
Using predefined commands is too inflexible so allow the chip data
to specify I/O commands directly.
Change-Id: Ie8f943914da4b8299678a59b1063c4c6d226e83e
Dumps parts of the standard ONFI info located at page 0x01
of the OTP area to a file for easy copy'n'pasting.
Change-Id: Ie0ba66d27c400737f14deec7c21e9dcb144028a6
Update the uimage reader's bad block handling to treat an ECC
uncorrectable error on the first page of the block as a bad block.
Change-Id: Id3aa7a338fcc36c0e2381063b119efe41f957122
The iPod classic/6G comes with 64MB of RAM. This
brings it in line with the plugin buffer size of some
other targets that have the same amount of RAM,
such as the Fiio M3K, and enables the use of
PictureFlow for users with very large databases.
Change-Id: I1ccae1cacda7a243139f4887f54bd35cc8e501cf
QuaZIP is included in several major Linux distributions and packaging
policies strongly oppose bundling of libraries.
Change-Id: I8d454784dc4b244f4dd8aa18deb3350a29aaab77
Use per-function sections to avoid linking in x1000_boot_linux()
on normal builds, which prevents link errors due to referencing
a non-existent usb_close().
Change-Id: Ied7b233603c49fc856db8445e368675b181e2f1f
Many SPI NAND flash chips have on-die ECC engines that report
ECC status via the status feature register. This code handles
the common case where ECC status is reported with 2 bits: one
bit to indicate if flips were detected & corrected, and another
bit to indicate an uncorrectable error.
Change-Id: I5d587cd960ca9d090d2629e890724a6bc411e70c
Using 'typedef struct' is not in line with the project coding style
and somewhat problematic, so get rid of it here.
Change-Id: Icfe79de72ed82cb7526e9f4e8296ec12084c01ac
Some components have additional ID bytes. Add support for an
optional 2nd device ID byte during the identification routine.
Change-Id: I5bbad73fb57004067c6f13f223f7bf4d43ff7849
