The input to the ADC is now set to CVDD inside the while loop. If the input gets changed while waiting for the voltage to be read it will now be reset to CVDD before the next read is attempted.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21584 a1c6a512-1295-4272-9138-f99709370657
Lower CVDD core voltage to 1.10 volts when the frequency is less than 200 MHz.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21577 a1c6a512-1295-4272-9138-f99709370657
- cache IRAM and DRAM
- map IRAM just next to DRAM to remove the need for -mlong-calls and reduce binsize
- tweak delays in Fuze button code
- tweak delays in Clip button code (down button sometimes doesn't respond anyway : an alternate driver is being worked on)
Before reporting any problem, please check your filesystem or format your player from the OF
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@21228 a1c6a512-1295-4272-9138-f99709370657
Reorder system_init() to initialize peripherals not only in bootloader
Use a 65MHz PCLK (and memclk) which will be needed for realtime decoding
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19330 a1c6a512-1295-4272-9138-f99709370657
Fix lcd drivers which stopped working after changing the PLL.
Move set_cpu_frequency() to a place where it is actually used.
Remove enable_irq() call already done by the bootloader
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19276 a1c6a512-1295-4272-9138-f99709370657
Use a 24MHz peripheral clock instead of 64MHz for battery life
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19234 a1c6a512-1295-4272-9138-f99709370657
A button press of ~10s will trigger the hardware power off instead of ~1s
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19123 a1c6a512-1295-4272-9138-f99709370657
The AMS Sansa use the same AS3514 registers (except USB_UTIL which was added)
Use the register defines in AMS Sansa code instead of hardcoded values
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19073 a1c6a512-1295-4272-9138-f99709370657
Implement some of the new functions
Use as3514 rtc
Add AS3525 case in rolo.c
Copy card_get_info_target() from ata-sd-pp.c , and use the correct 32bits words order
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19064 a1c6a512-1295-4272-9138-f99709370657
Adds read-only SD driver, largely copied from ata-sd-pp.c
Only tested on the embedded SD, on the Clip
First steps to build a Normal firmware
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19045 a1c6a512-1295-4272-9138-f99709370657
init_threads() requires that they are disabled when called
anyway they are not needed at the moment, so leave them disabled
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19029 a1c6a512-1295-4272-9138-f99709370657
The AS3525 SoC ships with an ARM PL172 MPMC controller
Also correct the memory sizes in tools/configure
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18899 a1c6a512-1295-4272-9138-f99709370657
