Make sure its value quotes are properly escaped. Otherwise make on Windows
causes problems. Also, expand CPPDEFINES only once.
Change-Id: I52e91f17626b2596f389811b22abc12d94f721d1
Setup AR before checking for ccache to avoid adding ccache to ar. Setup CC and
CFLAGS in the beginning as well. Quote ar and system speex options to fix
building with ccache enabled.
Change-Id: I21714f0849e990abeac72dcda52c81474e090934
Conversion from centibels to register values was left out of
audiohw_set_lineout_volume().
Credit goes to Dave Marsh for providing the fix.
Just another little oversight from sound/audiohw rework.
Change-Id: I7f8b1c5fb575ac95b5d595c2f4824fbb5ebbd3c8
We need this only for cross compiling. Trying to figure the compiler prefix
fails if the compiler isn't gcc (i.e. clang), and we only support gcc when
cross compiling.
Change-Id: I822e1b47ec7e9d7e9fdeae8ccf3b8d417a472ef9
DSP_SWITCH_FREQUENCY has been deprecated and the same enumerated value
as DSP_SET_FREQUENCY since major DSP revisions were committed. This
task should have been performed much earlier but, oh well, do it now.
Change-Id: I3f30d651b894136a07c7e17f78fc16a7d98631ff
Just one more SNAFU after redoing sound.c. Software bass/treble controls
in the DSP expect .1 dB gain increments but the gains were being set as
1 dB increments because that's what the AUDIOHW_SETTING specifies. Just
x10 the gains given to audiohw_set_bass/treble.
Change-Id: Id5296f93908ec0036a5605d3a60a2cb5eec91bb5
95e23de made -Wl,--gc-sections appear after -T by combining it with the global
linker options. Moving the global linker options in front of -T seems to fix
the crash observed on mini2g after that change -- as it seems the linker
behaves differently if --gc-sections is passed after -T.
Fixes FS#12857.
Change-Id: Id64dc6b91726760d75a1a0cd85bb7c06208d2f45
Previously several additional rules were added by qmake to build the required
libraries. This has a couple of problems on Windows, requiring the use of a
msys shell.
Additional variables are passed as environment variables. Windows doesn't
understand this. Passing the variables via make command line argument works but
make won't be able to change those variables anymore, breaking things. Use
intermediate variables passed via make command line that are then exported by
the called Makefile. This doesn't work in the generated Makefile since the
export lines must not be part of a rule.
Also cleans up the project file a bit.
Change-Id: Iaffb059ce8bafe17a35bd1e0a74ae7acd966c138
Similar as done in ea0bfe7 ask the compiler for the binary it creates instead
of using uname to figure the target.
Simplify source file preprocessing to avoid using grep to improve compatibility
with Windows.
Change-Id: I39ecfe690c9bb70b07b0af5a7804d7e5ab512d71
While it made the mini2g not crash during startup anymore further tests showed
that other mini2g devices still exhibit the crash, or end up with a "No
partition found" error; furthermore the device tested first still crashes on
USB disconnect. Therefore the change doesn't really help with the problem, and
at the expense of increasing binary size for all other targets there is no
point in keeping it for now.
This reverts commit 850491a043.
Input type can only change once per call because the DSP parameters
are only copied at the start and input is always taken from the src
buffer which means sample input format switching can be once per call
instead of once per loop.
Change-Id: Ifa3521753428fb0e6997e4934f24a3b915628cc7
Some things can just be a bit simpler in handling the list of stages
and some things, especially format change handling, can be simplified
for each stage implementation. Format changes are sent through the
configure() callback.
Hide some internal details and variables from processing stages and
let the core deal with it.
Do some miscellaneous cleanup and keep things a bit better factored.
Change-Id: I19dd8ce1d0b792ba914d426013088a49a52ecb7e
fixedpoint.make is not a subdir Makefile but a lib Makefile. Setting
CORE_GCSECTIONS in it will affect the final link and make it always use
--gc-sections (for SWCODEC Rockbox), since libfixedpoint is always needed
(bootloader and HWCODEC don't use libfixedpoint).
Fixes FS#12857.
Change-Id: Ib30bd03cbcea9c339a73daf7b673868aa3cc7a88
HAVE_SW_VOLUME_CONTROL is required and at this time only affects the
SDL targets using pcm-sdl.c.
Enables balance control in SDL targets, unless mono volume is in use.
Compiles software volume control as unbuffered when
PCM_SW_VOLUME_UNBUFFERED is defined. This avoids the overhead and
extra latency introduced by the double buffer when it is not needed.
Use this config when the target's PCM driver is buffered and sufficient
latency exists to perform safely the volume scaling.
Simulated targets that are double-buffered when made as native targets
remain so in the sim in order to run the same code.
Change-Id: Ifa77d2d3ae7376c65afecdfc785a084478cb5ffb
Reviewed-on: http://gerrit.rockbox.org/457
Reviewed-by: Michael Sevakis <jethead71@rockbox.org>
Tested-by: Michael Sevakis <jethead71@rockbox.org>
When seeking to the next id3v2 frame we need to consider if the tag has the
unsync flag set. Not doing so will likely make parsing end up in the middle of
the current frame if the frame size exceeds the upper limit set during read.
The latter usually happens for album art frames.
Fixes FS#12849.
Change-Id: Ic92853eef4374508d84df347bcc66b6661d5037d
If AUDIOHW_CAPS is defined without explicit BASS_CAP/TREBLE_CAP while
HAVE_SW_TONE_CONTROLS is defined, AUDIOHW_HAVE_BASS/TREBLE should be
defined or otherwise the tone controls won't show up. TREBLE/BASS were
being defined if AUDIOHW_CAPS was NOT defined, but the same rule should
apply if the codec needs to specify other caps but doesn't use hardware
tone controls.
(I'm surprised noone noticed some settings gone missing :-)
Change-Id: I85b5c467bab07bb62362a0dc2d582267ac2d8ec9
Based on FS#9920 by Ryan Press with changes to selection logic so
that it works on my iPod Photo. Should also work on iPod Color/4G
and Mini2G. Moved all target specific code from
firmware/drivers/serial.c into new file
firmware/target/arm/pp/uart-pp.c in the same manner as other
target specific uart code.
Update to fix build error on ipodmini2g by adding defines in config file.
Removed unwanted whitespace
Tested on iPod Photo.
Change-Id: Ia5539563966198e06372d70b5adf2ef78882f863
Reviewed-on: http://gerrit.rockbox.org/455
Reviewed-by: andypotter <liveboxandy@gmail.com>
Tested-by: andypotter <liveboxandy@gmail.com>
Reviewed-by: Marcin Bukat <marcin.bukat@gmail.com>
pcm_set_master_volume had two implementations, one for a prescaler
and one without one but the differences can be made minimal enough
to combine them.
Change-Id: I889e60b50b9f046c093853cb1685058796fe9067
* SOUND_x enum can be generated by audiohw_settings.h along with settings
entries and sound_val2phys.
* VOLUME_MIN and VOLUME_MAX are no longer necessary within sound.c. If
you need them, they are for target-defined purposes.
* Fix up SDL volume implementation in sdl.c. Move sim volume calculation
code to pcm-sdl.c.
* Min trigger tresholds were based upon VOLUME_MIN for some reason.
These setting have nothing to do with playback volume. Since it is no
longer present, set these at -89dB which is the minimum peak meter
sensitivity setting.
* Fix an oversight in wm8758.c. I forgot to add the dB->register
conversion to audiohw_set_volume.
Change-Id: Ie1df33f1793eee75e6793f16bc7bddd16edb7f75
If disposal method is set to BACKGROUND one would expect that
canvas should be restored to global background color. That is
what gif standard suggests. Most (all?) decoders however treat
this as reseting canvas to transparency or fixed, decoder
specific background color. Virtually all gifs are prepared with
this in mind so to not break them we can't follow standard here.
Change-Id: I90ca712bba89d4190771eb5320eabda353d3e2bb
It bloats to much just for one simple use. Just use a simple function
for shifting sound setting decimal places.
Change-Id: I1a7d37cce6ada3c6e6600dc0d301f354ffeff231
This is going right in since it's long overdue. If anything is goofed,
drop me a line or just tweak it yourself if you know what's wrong. :-)
Make HW/SW codec interface more uniform when emulating HW functionality
on SWCODEC for functions such as "audiohw_set_pitch". The firmware-to-
DSP plumbing is in firmware/drivers/audiohw-swcodec.c. "sound_XXX"
APIs are all in sound.c with none in DSP code any longer.
Reduce number of settings definitions needed by each codec by providing
defaults for common ones like balance, channels and SW tone controls.
Remove need for separate SIM code and tables and add virtual codec header
for hosted targets.
Change-Id: I3f23702bca054fc9bda40f49824ce681bb7f777b
