- enhance registers description in header file with respect to the as3543
registers: point which one are present or not in the as3543, which bits
change (i didn't detail all registers)
- cache less registers, only up to the ones which are written to
multiple times
- use ascodec_readbytes() to cache all needed registers in a row
- separate the as3543 bits from as3514/as3515 in audiohw_preinit()
- comment out unused audiohw_set_lineout_vol
- some cosmetics
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26174 a1c6a512-1295-4272-9138-f99709370657
- Enable end of charge monitoring once, it doesn't need to be disabled
- Acknowledge the first (wrong) end of charge interrupt on charger enable
(this had been broken in r25299)
- Centralize reads to ENRD* registers and cache the results when needed
- on PP it is not needed because reads are atomic, we only check for
end of charge when the charging, and for charger presence when
discharging
as3525v2 (using as3543) specifics
- I got the datasheet today from AMS, thanks to them for being so fast
and not require me to sign tons of papers!
- USB detection now works on as3525v2 using the as3543. Clip+ won't
reboot to OF yet, it needs mkamsboot support first (usbstack disabled)
- Charging should work, the CHARGER register is at a different place, it
is an extended PMU register -> use ascodec_read/write_charger() to
access it
- real interrupts are not used yet for ENRD, we get thousands of
interrupts per second, apparently only limited by the i2c clock.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26116 a1c6a512-1295-4272-9138-f99709370657
-> Change references to as3517 into as3515
there is a reference to the as3515 in the public as3525 datasheet to
support this fact
as3517 is used in the as3527 SoC, the (public) as3527 datasheet has
detailed information on its registers
the audio codec/PMU used in as3525v2 (thought to be as3543) appears to be
compatible (identical?) with as3517
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@26075 a1c6a512-1295-4272-9138-f99709370657
If the bit 6 is set volume is much lower, without writing it explicitely
it is undefined.
According to linux sources this bit is related to mixer.
Initialize Audioset2 with low power 'hph' (probably headphones) quality,
as I couldn't make a difference with 'high quality' setting.
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25890 a1c6a512-1295-4272-9138-f99709370657
it lets you select internal PLL or external MCLK and is not related to mute
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25731 a1c6a512-1295-4272-9138-f99709370657
Add HAVE_AS3543 config define to differentiate the bits changed since as3514/as3517
Enable recording on Fuzev2/Clipv2/Clip+, although it was tested on Clip+ only
Note: storage is still read-only so I tested by listening to headphones loopback and watching the recording level in recscreen
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25390 a1c6a512-1295-4272-9138-f99709370657
as3525 comes with a as3517, as3525v2 with a as3543, rename specific
registers accordingly
Existing problems: FM (line out) doesn't work, volume can't go below a
certain point
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@25260 a1c6a512-1295-4272-9138-f99709370657
If the model is unknown and try to use it, the build will fail anyway
because it will not be defined
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19079 a1c6a512-1295-4272-9138-f99709370657
Move the ADC defines to as3514.h, and make adc-target.h only include as3514.h
Implement the missing API (ascodec_readbytes, ascodec_(un)lock)
Revert the changes to the PP-specific arm/ascodec-target.h in r19073,
use a AS3525 specific ascodec-target.h while moving the AS3514 specific
code in export/as3514.h
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19076 a1c6a512-1295-4272-9138-f99709370657
The AMS Sansa use the same AS3514 registers (except USB_UTIL which was added)
Use the register defines in AMS Sansa code instead of hardcoded values
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19073 a1c6a512-1295-4272-9138-f99709370657
* unification of init and close
NOTE: audiohw_init is a void function now, because it never (can) fail
okay from JdGordon@irc
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13622 a1c6a512-1295-4272-9138-f99709370657
* add mas35xx driver for all mas35xx targets. Later
mas35xx code from sound.c will move to this new driver
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13464 a1c6a512-1295-4272-9138-f99709370657
now after the audio improvement: -40.5dB ... +6dB => -73.5 ... +6dB
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13447 a1c6a512-1295-4272-9138-f99709370657
* disable some unneeded stuff -> save power
* remove some unneeded functions
* shadow registers, so we dont need to do so much i2c traffic
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@13150 a1c6a512-1295-4272-9138-f99709370657
