* Cannot turn off the LCD directly (have to rely on backlight)
* Only insmod/rmmod the usb gadget modules if state changes
Change-Id: I9ea90177d496cd035ada93e04a93a7c6f2e84706
* Specify exported USB VID/PID in target config header
* Don't fail if the sd filesystem has already been remounted
(ie due to platform hotplug)
Change-Id: Ifd2dae0c4f15086bf2bf89eb093018b3c4d2b75d
(we were trying to foward-declare functions from within static
initializer context. GCC no longer accepts this)
Change-Id: I58f316ecc84c8ab45fffc054955727a55714b0a3
* Track mute state, only call hw if actual change is needed
* Don't unmute in audiohw_postinit()
* sample rate tracking fixes
* erosq: Don't start up muted
Change-Id: I004f787a4b7ea73c16b6ec9818ec29a12c89f46b
* If AUDIOHW_MUTE_ON_PAUSE, no meaningful change
* Unconditionally unmute on playback start
* xduoox3ii: Mute on sample rate change
* rocker/xduoo: Stay muted after startup
This avoids the nasty "pop" on startup, without doing
the full mute-on-pause stuff that causes unacceptable
dropouts on the X3ii.
Change-Id: I2e3ee0bb8094e288f37a0acada86a80016ce5cac
* HOME_DIR is now either "/" or special "<HOME>"
* target-specific "home dir path" is defined solely by PIVOT_ROOT
* PIVOT_ROOT path is now defined in toplevel config files
* Make Samsung YP-R0/R1 and SONY_NWZ use PIVOT_ROOT too
* Do not prepend PIVOT_ROOT path if the path already has it!
* Do not play these games for __PCTOOL__ builds
Change-Id: I3d51ad902a5f9cafe45ba15ba654f30f1ec6113a
The Q and K have a slightly different case, but the hardware under the
shell is completely identical.
These models are rebadged versions:
* Hifiwalker H2 (== Q)
* AGPTek H3 (== K)
* Surfans F20 (== K)
Other notes:
* Significant improvements in the shared Hiby-platform launcher/loader
* SD card can theoretically be hot-swapped now
* Support external USB mass storage!
* Some consolidation of Hiby-platform targets
* Some consolidation of plugin keymaps
Todo/known issues:
* Keymaps need to be gone over properly
* Convert to HAVE_SCROLLWHEEL?
Change-Id: I5a8a4f22c38a5b69392ca7c0a8ad8c4e07d9523c
Most credit goes to: Roman Skylarov
Additional integration and refactoring by myself.
*** COMPLETELY UNTESTED ***
Change-Id: Ia64c36d92e0214c6b15f7a868df286f8113ea27b
This codec requires floating point.
Original author: Peter Sovietov
Ported to Rockbox: Roman Skylarov
Further integration and bugfixes: Solomon Peachy
Change-Id: I781ecd3592dfcdbbc694063334350342534f1d6c
It doesn't work properly and interferes with the power button in the keymap.
Rework WPS keymap a bit to make single-tap power emulate lock.
Change-Id: I9d9b9b4adcea3764e6e427f484e051c9bab9d13b
Note: PCM mix buffer sizes are _way_ too small for these high bitrates
(We really need to make the mixer stuff use dynamic buffer sizes based
on the bitrate. Maybe pre-allocate a max size based on upper bitrate limit,
but use only part of it at lower bitrates? So we can have sane latency..)
Change-Id: Id7b4afd73dba7f1ffb84b2e1c016859fae5d6835
* xduoo x3ii/x20: Better line out support
* less granular volume settings (too many steps before)
* Better handling of swiching sample rates
* Log actual sample rate in debug menu
Most credit goes to Roman Stolyarov
Additional integration [re]work by myself
Change-Id: I63af3740678cf2ed3170f61534e1029c81826bb6
* SAMPR_CAPS_ALL -> SAMPR_CAPS_ALL_48/96/192
* All targets claiming SAMPR_CAPS_ALL now get appropriate subset
* No need to explicitly define HAVE_PLAY_FREQ
* Rates that are a multiple of 44 or 48KHz can be used for playback
Inspired by a patch by Roman Stolyarov, but substantially rewritten by myself.
Change-Id: Iaca7363521b1cb9921e047ba1004d3cbe9c9c23e
* DMA Bulk IN (ie our TX) results in sequential transfers 33-68% faster.
* DMA Bulk OUT (ie RX) is mostly stripped out due to complete brokenness.
* Interrupt and control endpoints remain PIO-driven.
Other improvements:
1) Use consistent endpoint references (no magic numbers)
2) Greatly enhanced logging
3) DMA support can be compiled out completely
4) Setting lockswitch will disable all DMA operations at runtime
5) Much more robust error checking and recovery
Change-Id: I57b82e655e55ced0dfe289e379b0b61d8fe443b4
* Increase audio buffer size to better handle IRQ latency (256->2048)
* Ensure DMA engine is idle prior to starting transfers
* Set AIC to repeat last sample in case of underflows
Change-Id: I9c45c20481ee072e5882b7586fb7d50bd8ef2f35
Back off to 480MHz [max] clock, bus/mem clock of 120MHz.
576 is unstable on at least one unit, and 528 still glitches.
Change-Id: I020e48532524e739f3bfa42bed570381ccd34959
Provide definitions for the macros:
* RB_ROOT_VOL_HIDDEN(v) to exclude certain items from the root.
* RB_ROOT_CONTENTS to return a string with the name of the
directory to mount in the root.
Defaults are in export/rbpaths.h
It's a bit much for those that don't need the full functionality.
Some conditional define can cut it back a lot to cut out things only
needed if alternate root mounts are required. I'm just not bothering
yet. The basic concept would be applied to all targets to keep file
code from forking too much.
Change-Id: I90b5c0a1c949283d3102c16734b0b6ac73901a30
default/low speed is 192 MHz, Max is 576
Downclock PCLK/MCLK/etc to 96MHz to save a bit of juice
Honestly the high speed could be dialed down to, eg 384
as this thing is so bloody fast..
Change-Id: Ie65597c74290f1603e65f69dae8e75b59c8ba0b4
PLL0 Needs to be a multiple of 48MHz for sane USB operation!
(Indeed, "typical" clock for this part is 528, but that seems a
waste of power)
Also fixes a minor bugaboo in the jz4670 usb divisor calculation
that won't matter until we enable reclocking
Change-Id: I40b1fd1ae48871e50885981ccc8b01feb711b9a5
