Unfortunately the hardware is not very helpful when changing voltage: in DCDC
mode we have the DC_OK_IRQ but in linear regulator mode, the only available
bit doesn't work when lowering the voltages. At the moment, simply sleep for a
little while before a better solution is found.
Change-Id: I89335873e9e42e5c6e9131f40db7839b008c021c
The old could trigger an immediate IRQ if for example the count was 0
when setting up the timer: since the count was updared *after* clearing the
IRQ, it could fire in between.
Change-Id: I0357b201655bc0e56425ffb249ca807525f30217
zenxfi2: add support for internal storage on the SD version
The code can now skip devices marked as PROBE if they fail to init, thus
making it possible to handle various kinds of internal storages. The current
code probably doesn't interplay nicely since it acquires pins and never
release them so it will probably break NAND code when it's ready but NAND code
is not ready yet anyway.
Change-Id: I4cb962de4215661e521743a3f511445dbbf28673
The current code does hazardous tweaks to the power subsystem: indeed if one
boots with USB plugged and some stub powers on the DCDC switch, it will fail.
Indeed, a hardware bug prevents from going back to linear regulators (see
errata) so we cannot expect to reach a known state (linreg on, dcdc off)
on each configuration and in particular, powering down the 4p2 rail in
such a configuration will result in a power brownout.
This commit works around this issue by not touching the initial power
configuration until USB is (un)plugged, which are the best spots to get
known states.
Change-Id: I8741a3995df8ae61ca1c887a3ecb7903d0ac5136
In most devices, the button ladder is not actually derived from VDDIO but
from a constant voltage source, making it very easy to read it. However on
some devices like ther ZEN X-Fi Style, the ladder is wired to VDDIO we
can be changed so it's crucial that the button driver correctly scales the
values wrt VDDIO.
Change-Id: Ifc11abe2838fa7d16d0d60ecd96964a8dc5ea6d7
The hardware watchdog automatically shutdown the device after 10s of
inactivity, being defined as 10s without the tick IRQ fired (aka braindead
device).
The software IRQ mechanism is more interesting: it uses a very high priority
timer setup as one-shot to trigger after 5s of inactivity (but IRQ still
enabled). When detected, it patches the running code to insert a SWI
instruction so that on interrupt return it will trigger a SWI and produce
a meaningfull backtrace to debug the deadlock. This should allow to debug
freezes in IRQ context.
Change-Id: Ic55dad01201676bfb6dd79e78e535c6707cb88e6
Rewrite IRQ handling to allow nested IRQs: on each IRQ entry, we save the
parameters on the (IRQ) stack and then switch to SVC mode (with its own
stack) and renable interrupts. Make sure interrupt is properly acknowledged
by using the read side-effect (RSE) mode and handle priority levels as well.
Change-Id: I3fd68289b430c56bdd256868939238ff268e42b4
This patch includes some refactoring:
- renaming according to Rockbox guidelines
- GPIO code merging, still with target defines
- some simplification in firmware/SOURCES
Change-Id: I7fd95aece53f40efdf8caac22348376615795431
This is the basic port to the new target Samsung
YP-R1, which runs on a similar platform as YP-R0.
Port is usable, although there are still
some optimizations that have to be done.
Change-Id: If83a8e386369e413581753780c159026d9e41f04
In b31c856 startup code section was renamed but boot.lds
linker scripts were not updated accordingly.
Change-Id: I9c9893ec2e199ac2555007a1d23e109ca0daea28
This reclaims ~6kB of ram.
Change-Id: Iafdc661b1cf4445669c08c79205043792b8d14c3
Reviewed-on: http://gerrit.rockbox.org/718
Reviewed-by: Marcin Bukat <marcin.bukat@gmail.com>
This should catch the case of buffer misuse which results
in corrupted cookie of next allocation. The check is performed
on move_block() so it may be a bit late.
There is buflib_check_valid() provided which checks the
integrity of all cookies for given context.
On DEBUG build with --sdl-thread this check is carried out
for core_ctx on every context switch to catch problems earlier.
Change-Id: I999d4576084592394e3dbd3bdf0f32935ff5f601
Reviewed-on: http://gerrit.rockbox.org/711
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
The only true difference in this platform is the amount of iram
between MCF5249 and MCF5250. Instead of duplicating the file
simply use one with proper ifdefs.
Change-Id: Ifd56ebd2666813633502e3b5d83669424659c039
Reviewed-on: http://gerrit.rockbox.org/713
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
Reviewed-by: Marcin Bukat <marcin.bukat@gmail.com>
This fixes the radioart crash that was the result of buffering.c working
on a freed buffer at the same time as buflib (radioart uses buffering.c for the
images). With this change the buffer is owned by buflib exclusively so this
cannot happen.
As a result, audio_get_buffer() doesn't exist anymore. Callers should call
core_alloc_maximum() directly. This buffer needs to be protected as usual
against movement if necessary (previously it was not protected at all which
cased the radioart crash), To get most of it they can adjust the willingness of
the talk engine to give its buffer away (at the expense of disabling voice
interface) with the new talk_buffer_set_policy() function.
Change-Id: I52123012208d04967876a304451d634e2bef3a33
The port uses the imx233 soc, it's a STMP3650 based Samsung player
Change-Id: I50b6d7e77fd292fab5ed26de87853cd5aaf9eaa4
Reviewed-on: http://gerrit.rockbox.org/490
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
This reverts commit 462adf2a0f.
Leaving the card in TRAN results in a huge power consumption because some cards
and internal bridges do not automatically enter power saving mode in TRAN state.
Change-Id: If79efe8cf99b24174889b3a5ebbcb51b07085f58
The ZEN/ZEN-XFi seem to be very picky about the lcd. And they do not like
standby mode so I'm going to drop it, the OF doesn't use it anyway. I still
don't know what this "power" pin is about, obviously it's not real power but
the OF toggle it. Let's hope the lcd will finally become more stable with
fix: the driver now does full power on/off on enable/disable.
Change-Id: I1c465ee4f2462bc3d9507e5f575f0a181af60214
Tested on iPod Mini 1G.
Change-Id: I67ac9b7ed84c34533107136d0aa72e5ce3bcc5bc
Reviewed-on: http://gerrit.rockbox.org/668
Reviewed-by: Frank Gevaerts <frank@gevaerts.be>
Choices are limited for those: i2c is either generic software or imx233
hardware and power is either none or with a gpio. So factor ever possible
combination in a single common file and use fmradio-target.h to supply the
required parameters. This will remove a bunch of duplicate code.
Change-Id: If12faeb2e371631cd39cc18a4c1d859812007934
The old code allowed each target to specify its adc targets but this proved
useless since the target rely directly on imx233/lradc for input method and
generic adc is mostly used for battery and debug. Remove all target specific
files and provide a generic implemenation. The targets can still specify a
battery temperature channel in powermgmt-target.h
Change-Id: I68cf2e3e46379d174ac6d774ffb237bb15a19ae3
Although there is no difference in the cost of a full or partial update,
it is preferable that the semantic of lcd_update_rect() be correct.
Change-Id: I8a168388b98e0dbd7237729b7fd8a62fa1885be1
Originally written and uploaded by Lalufu (Ralf Ertzinger) in Feb 2012.
They have been condensed into a single patch and some further additions
by Andy Potter.
Currently includes Authentication V2 support from iPod to Accessory,
RF/BlueTooth transmitter support, selecting a playlist and selecting a
track from the current playlist. Does not support uploading Album Art
or podcasts. Has been tested on the following iPods,
4th Gen Grayscale, 4th Gen Color/Photo, Mini 2nd Gen, Nano 1st Gen and
Video 5.5Gen.
Change-Id: Ie8fc098361844132f0228ecbe3c48da948726f5e
Co-Authored by: Andy Potter <liveboxandy@gmail.com>
Reviewed-on: http://gerrit.rockbox.org/533
Reviewed-by: Frank Gevaerts <frank@gevaerts.be>
HiFi E.T. MA8 is almost the same as MA9 except
another DAC(pcm1792 in ma8, df1704 in ma9).
MA8 has ILI9342 lcd, MA8C has ILI9342C lcd.
Change-Id: If2ac04f5a3382590b2a392c46286559f54b2ed6a
The only difference between this target and HiFi E.T. MA9
is display driver (ILI9342 in MA9 and ILI9342c in MA9C)
Change-Id: Icc3d2490f850902a653175360f12283f3708bbb7
button_read_device() could be called before pca9555_read_thread
intializes pca9555_in_ports variable, and return incorrect value.
Change-Id: I960bff72fe230c9d0256b20e92d0a75e67266038
The previous code disabled the irq when there were fired. This seems
unreliable for some mysterious reason. Instead simply disable them
before enabling the irq.
Change-Id: I7ee1aa25dbc41c7dd53aa7c7744aa5e4d70ff2d8
Reviewed-on: http://gerrit.rockbox.org/640
Reviewed-by: benjamin brown <foolshperson@gmail.com>
Tested-by: benjamin brown <foolshperson@gmail.com>
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
The code was broken in two ways:
- it called storage_read_sectors with a wrong drive number
- calling storage_read_sectors too early at boot time will fail because
we are in the init function, so the drive is not yet registered.
To fix this, use a user provided read callback instead of storage read
functions.
Change-Id: I5ab79d48391fae619d5f8ae09c3d499fc43854c8
The setting is currently unused but it provides some documentation and basic
support for a more comprehensive implementation of read-only support.
Change-Id: I353c33ef765ef6e6c09d59e943da6654a311ad84
The exact combination on which recording is needed is too complicated, so
just always cancel the unused warning, the compiler will optimise it away.
Change-Id: I0946586e4b01769c98babc4616f893c38f44c05f
The new code can select among several types of window (user, system, ...).
Furthermore, the type of partitions to use is selectable in config file.
Currently, two types are support: Freescale style MBR and Creative MBLK
Change-Id: I969d60a3d08f2c9448fb4b9c440051b7801b94cd
When bootloader is too intelligent, like on Creative devices, it might leave
some unexpected IRQs sources on, this is problematic when those sources share
the same IRQ line.
Change-Id: Ie9333918eb1048b1f2de4ea738cddf556aa75ee2
The STMP3700 has unreliable vbusvalid irq so we need to use
vdd5gtvddio. Therefore, using the vbusvalid bit produces
inconsistent results between events and detect. Fix that
by making power handle all the usb detect stuff.
Change-Id: Ic521b2f6677602e184fe46352c5359f4b4ba8d56
These functions are mostly used by the radio drivers and any blocking
call could potentially block the entire UI, which is pretty bad.
Since any request is expected to finish within a few us, having a 10ms
timeout doesn't seem unreasonable.
Change-Id: I03b19729511547e5bbdeb3476d020e5d87d0d7e1
On targets like stmp3700, resetting the dma channel on "soft" timeout
drives the whole block crazy unless it goes through complete reset.
Change-Id: I830b252279989bf9f9cd9c138240a6ea9b003527
Enable simulator for the target ypr0 to
be built and used.
Change-Id: I1b080f07ab90f5c4856881d08ad70e1053bbb0c0
Reviewed-on: http://gerrit.rockbox.org/618
Reviewed-by: Frank Gevaerts <frank@gevaerts.be>
The driver can now handle HOLD in several ways, including using a GPIO.
Also add a debug routine to read the raw value of the adc.
Change-Id: Ide2cb1ac58e759b4bc464e606b432f2c150ee36f
Many imx233 targets boot in a very low performance mode, typically cpu and
dram at 24MHz. This results in very slow boots and very unstable USB
bootloader mode. Since cpu frequency scaling is disabled in bootloader in
rockbox, always make the frequency scaling code available and boost at boot
time.
Change-Id: Ie96623c00f7c4cd9a377b84dcb14b772558cfa4d
This one is a bit strange: our codebase just don't use it if there is both
SD and MMC, so this missing function got unnoticed so far.
Change-Id: Ifea4bb5140477b7637d033737594259cc44fb10e
The i2c core has some bugs: it locks up when the slave doesn't NAK and
prevent the dma channel from being resetted. Specifically handle this
situation by setting CLR_GOT_A_NAK (workaround) and then reset dma and i2c
block.
Change-Id: I0e09d38d4301a0ad42dfad785cc934b43f2c4485
Target that have a touchpad/touchscreen should disable it while
being locked (In order to avoid LCD to drain battery power due to
"key locked" constant reporting messages. If they a have a keylock
button this was already handled at driver level. If not (e.g. fuze+),
they will have to implement a switch at driver level that action.c
can operate on softlock.
This patch does the following for any target having a touchpad
or a touchscreen and no HAS_BUTTON_HOLD (ie any softlock target)
1) it implements the code to call button_enable_touch(bool en) in
action.c.
2) button_enable_touch is implemented in button.c and call
either touchpad_enable or touchscreen_enable
3) those two function are implemented respectively in touchscreen.c
and a new touchpad.c file. They provide a generic way to silents touch's
device and call a function at driver level where target specific code
can be implemented if possible/needed (for power saving for instance).
Those function name are touchpad_enable_device and touchscreen_enable_device
4) we implement an empty function at driver level of targets that need it
to have them still being able to compiled.
Change-Id: I9ead78a25bd33466a8533f5b9f259b395cb5ce49
Reviewed-on: http://gerrit.rockbox.org/569
Reviewed-by: Thomas Martitz <kugel@rockbox.org>
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
Drop most of the cases: only keep 64 MHz and 133 MHz. Pick values
from the manual which seem to match real life values.
Change-Id: I912752fbe372f9f44207db6853d0ff92fd619bed
Now that the drive strength problem has been fixed, we can safely
drive sd cards at 48MHz in HS mode to get the best possible
transfer speed at 3.3V.
Change-Id: I0291589c399fb4880deba97895ff578451a32f99
Instead of going back and forth between TRAN and STBY modes,
stay in TRAN mode all the time, this avoid two commands on each
read/write and a potential delay to wait for the card.
Change-Id: Iafd456ab9a581d870331b622eeb48dcc254eda7f
This allows tells the card the number of blocks that will be
transfered. This is usually faster than continuous read/write.
It is mandatory for MMC and on SD cards, support is probed.
Change-Id: Ide3f97c26c2b714390884c69e05b00c2caa552f8
The old max dma transfer size was set to 2^15 because allowing
values up to 2^16 would result in overflow of the transfer count
in many places. This was a problem with the old register headers
because the macros didn't make sure the result is contained in
the bitmask of the field. The new macro do so 2^16 will actually
end up being 0 which means 2^16 for the hardware. This is kind of
hacky but it works and I prefer that this stays a power of two
because setting it to 2^16-1 would be extremely weird.
Change-Id: I9ce5661c477a79ab52efd5c573948e2353117804
- take advantage of the new rmi power function implemented to:
1) lower usual power_mode to low_power as it seems to be enough and might save
some battery
2) implement a system that lower that state to very_low_power
after 1 minute of inactivity.
3) implement touchdev_enable(bool) that can be use later to disable the
touchpad when needed
4) improve the debug screen report of the current power state and
changing the power state using volume keys
Change-Id: I0b372696d4b2bef5360c778d0500870fd9badee1
Reviewed-on: http://gerrit.rockbox.org/525
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
When using variadic macros there's no need for IF_MD2/IF_MV2 to deal
with function parameters. IF_MD/IF_MV are enough.
Throw in IF_MD_DRV/ID_MV_VOL that return the parameter if MD/MV, or 0
if not.
Change-Id: I7605e6039f3be19cb47110c84dcb3c5516f2c3eb
These nearly identical files are multiplying like rabbits as PP targets
are added and make SoC-related changes a PITA. Just include the master
.lds file from the target one as was done for bootloader USB.
Change-Id: I65e9e653030f0688b1728e32ada16abf2932e029
The old code used get_action which is bad because it belongs to
apps/. Instead rewrite a simple version of get_action, also
rewrite the top level handler. Since the number of screens is
becoming quite high, it now shows a list and the user can start
from any screen. Once in a screen and as long as the user presses
select, it will advance to next screen until it finally returns
to the list on cancellation.
Change-Id: Icbc7676a17e4a6e859b7781a4a471d8303910591
The current code was spreaded over power and powermgmt which made
it behave strangely, especially since there are relationships
between power management and frequency scaling. The new code makes
sure power management is initialised before frequency scaling
starts. It also makes sure to start from a known state, thus
fixing potential issue when the bootloader stops in a trickle
state where DCDC is improperly configured.
Change-Id: Ibded2e590e108f6c98daa52d2cf1bd28763c8923
Implement the switch function as specified by the specification,
that is wait for the response AND transfer 64 bytes of data. This
fixes some issue when the SD card take a long time to switch. In
particular waiting 100ms (max per spec) will not work if no data
is transfered in some cases.
Change-Id: Ia22350468018b842e57ce6f6c1a8d676eba97fb8
This adds the application part of alarm wake up. On some targets
like the Fuze+, it will also require a bootloader change to make
sure that the device doesn't power down on alarm wake up (for
example on the Fuze+ the bootloader requires the power button to
be hold sufficiently long, thus preventing alarm wake up to work)
Change-Id: I5d01957852355fddbd48110d3d75a5533f07879e
On the ZEN X-Fi2, the fractiona dividers are gated by the
bootloader and must be ungated before switching emi to pll.
Change-Id: I5df57ed5581054883da4cbb3b4f3ce3539391ab5
