Fix lcd drivers which stopped working after changing the PLL.
Move set_cpu_frequency() to a place where it is actually used.
Remove enable_irq() call already done by the bootloader
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19276 a1c6a512-1295-4272-9138-f99709370657
Use a 24MHz peripheral clock instead of 64MHz for battery life
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19234 a1c6a512-1295-4272-9138-f99709370657
A button press of ~10s will trigger the hardware power off instead of ~1s
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19123 a1c6a512-1295-4272-9138-f99709370657
The AMS Sansa use the same AS3514 registers (except USB_UTIL which was added)
Use the register defines in AMS Sansa code instead of hardcoded values
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19073 a1c6a512-1295-4272-9138-f99709370657
Implement some of the new functions
Use as3514 rtc
Add AS3525 case in rolo.c
Copy card_get_info_target() from ata-sd-pp.c , and use the correct 32bits words order
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19064 a1c6a512-1295-4272-9138-f99709370657
Adds read-only SD driver, largely copied from ata-sd-pp.c
Only tested on the embedded SD, on the Clip
First steps to build a Normal firmware
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19045 a1c6a512-1295-4272-9138-f99709370657
init_threads() requires that they are disabled when called
anyway they are not needed at the moment, so leave them disabled
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@19029 a1c6a512-1295-4272-9138-f99709370657
The AS3525 SoC ships with an ARM PL172 MPMC controller
Also correct the memory sizes in tools/configure
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@18899 a1c6a512-1295-4272-9138-f99709370657
