The lradc architecture of the stmp3600 is rather different:
only channels 6 and 7 have configurable source and we need to
take care when allocating channels so that we can actually
measure the right channel! Delegate die temperature sensing to
the power block on stmp3600.
Change-Id: I0860eb4ea98240facc3d4a19d61684eca5f630cc
There are many small differences between them. In particular
some regulators are not available on stmp3600. Also the vbusvalid
detect method is not available as an irq on stmp3600 and seems
broken on stmp3700. Finally die temperature is handled by the
power block on stmp3600.
Change-Id: I2c68b418738f15564e445d3a1496018cef97fff7
Under some circumstance (timeout), the dma interrupt is not fired
and only the error one is. This can happen with some picky SD
cards and with the current code it causes a 1 second timeout.
This code properly catches the error interrupt to stop as soon
as possible.
Change-Id: I9c53ea272d01793f0f229571502e99eb62f1b723
The current pwm interface is too low-level. Introduce a higher
level setup function which directly computes the parameters from
the required frequency.
Change-Id: Ie95c7522e9f42492fe872203f4cab46770a9649a
The clkctrl functions were becoming a mess. Normalise the names,
get rid of the xtal derived as special case and use the same
interface.
Change-Id: Ib954a8d30a6bd691914b5e0d97774ec9fc560c50
A number of pins on the imx233 are standard and manually calling
functions to acquire, set function/drive/output is painful. This
will become unmanageable when we will add support for the other
stmp chips.
Introduce the concept of virtual pin which is a way to completely
describe a virtual pin (virtual because pins are muxed).
Change-Id: I01b6e040945648e58e1d1abab06529c9571c5f10
The current pinctrl functions were a mess. Normalise the functions
names to make them shorter and clearer.
Change-Id: Iac6ff84625ef2b7610268e3a5802dc0088de3167
The code assumes that gustable[] has 128 entries, while it
only had 120. Since the entries follow a simple pattern (they
seem to be note frequencies, so each entry is the previous one
multiplied by the 2^(1/12)), expanding the table is the simple
fix.
Change-Id: If5b5a50378afd3206c9d550227dd9aac8e355c96
The SD SWITCH command has a result and can take a long time to
finish. Ignoring the answer and waiting an arbitrary time is
unreliable at best.
Change-Id: I1bfbb193952b96598f8bb056bac88220d4edf1fc
Refactor code.
This tool can now either load a scrambled rockbox
firmware (in which case the model is check against the
firmware), or any ELF file. This is useful for example
for hwstub which produces a ELF file and still needs
to be loaded by producing a SB file.
Change-Id: I7aa381b3f6587788d1950793e89ce5608c53cccc
The mkimxboot was becoming messy with juge functions and
redundant code. Factor reading/writing/loading code into smaller
functions. Introduce the concept of rockbox firmware to simplify
support of other formats than scramble.
Change-Id: I3a61295ca5abca1a0eee8c9e8709c6b8dfa256a6
Register set selection is based on the value of the
IMX233_SUBTARGET value. The reg-select.h file (used by the
generated headers), does the selection based on this value as
follows:
- 3600 <= . < 3700: stmp3600 register set
- 3700 <= . < 3780: stmp3700 register set
- 3780 <= .: imx233 register set
Note that this selector relies on the name of the socs in the
register description to be respectively stmp3600, stmp3700 and
imx233.
Change-Id: I793b18e6c4f3fea85aa74f4c6be3affb0622c14e
The generator now has more options to generate or not selectors.
It can also generate a macro header containing lots of using
macros for register operations.
Change-Id: I9dd6b4bdc7daeabd1a2c9365ce082358475721b5
Rockbox only uses the first album art image (APIC / PIC frame) found in id3v2
tags. When a file contains more than one image the second one is ignored but
the parsealbumart() callback overwrites the already set data. This causes the
metadata structure to contain an invalid pointer to the image data, resulting
in no image shown.
Make parsealbumart() aware of this and skip parsing when an albumart image has
already been found. Fixes FS#12870.
Change-Id: Id8164f319cd5e1ee868b581f8f4ad3ea69c17f77
Recent versions of texinfo breaks various binutils and GCC
builds. For GCC setting MAKEINFO=missing at configure time works
but not for binutils where patches are used to fix parsing errors.
This also makes rockboxdev.sh handle applying multiple patches.
Change-Id: Ia8e6dc7662ab725490e4b4428676d235f0bd38bb
Reviewed-on: http://gerrit.rockbox.org/471
Reviewed-by: Nils Wallménius <nils@rockbox.org>
The tool can now load sb1 and sb files to devices. Detection has
been improved and the tool can infer the packet size for the HID
description as well. The command line interface has been vastly
improved too, this breaks the old one.
Change-Id: I01a0ff8f8a007514aa81c56f114c0f0a86e3303c
