This action has never been used since its introduction
in 2006. There's no real need for it, as it's possible
to reset settings from the context menu.
Change-Id: I6b357ad1a2e19a9b631ee3055e158492570479e3
Remove the battery power ADC since it's not used right now,
and seems to fluctuate too rapidly to be of much use.
Change-Id: If115e4e3ce14d4c18ce899f5a889f7f99ab66489
This caused LCD problems on the ErosQ, where the screen would
go white until being put through a sleep/wake cycle. The exact
reason for this isn't obvious, but the problem didn't exist
prior to the AXP driver rewrite.
The two dependent changes,
42999913ba - x1000: Increase USB current limit to 500 mA at all times
90dd2f84a9 - x1000: Correctly limit USB charging current
ended up bringing the USB charging situation back to where it
was prior to the rewrite, so the cleanest option is to revert
the whole lot.
This reverts commit 42999913ba.
This reverts commit 90dd2f84a9.
This reverts commit 2d89143962.
Change-Id: I1cff2bfdd1b189df14bcf8cce42db725caa470d7
Don't disable grayscale overlay, don't show "resize" messages
between frames and and don't clear display unless actually
necessary
Change-Id: I9f501d8280ce0c8f26f4345088d805d1b84cf143
lcd_update was called while the grayscale overlay was running
regression, apparently introduced by 0ceaff2
(only reproducible on target, not in Simulator)
Change-Id: Ife0ef359e19a03a6dc033070a11ae5843ee555e6
Since we manually do it later, syncing after every
file is unnecessary and can make the audio
queue overflow
Change-Id: Ia7ab6ee345b25a453c56f48ed0d330b04da6da94
make every item in a selection scroll when no columns are selected
otherwise title & currently selected column will be the only scrolling lines
Change-Id: I3bab480f47997b89a01563a69dc68e6633152cf5
Prev/next buttons on iPods or Fiio M3k can now
be used to select another album without having to
return to the albums view first. Scroll wheel/strip
handles scrolling up and down in the track list
as before.
Other targets probably have the necessary
buttons for this, so the keymap can be extended
in the future (same goes for alphabetic browsing)
Also prevents queue overflow and handles
failure case for track list tagcache retrieval.
Change-Id: Ic8ff4471e1583d1ab1f7d16911b15705a7f60aca
When tagcache or storage are busy, it can
take a few seconds for the list to appear.
Meanwhile, the screen used to be either blank
or the cover was left suspended in mid-animation,
if the animation was skipped.
Change-Id: I655320c4f92ff496834e252cc77ece47723a8677
create_track_index appears to have relied on
buflib_buffer_out returning a certain amount
of space without checking that it was actually
available. In at least one test case, as little as
16 bytes were returned, leading to a buffer
overflow and later a segfault.
Change-Id: Ic0783f3cd5bf015803b7ce90537ba38ab3434bea
When appending tracks, they were always inserted last.
You can now choose from the usual options offered by
the "Current Playlst" context menu to queue or to insert
tracks at the requested position.
The splash after appending that forced you to wait for
2s has been eliminated.
Also fixes crashes on targets that use the grey_core lib
if a splash showed up when playback was started,
e.g. LANG_PLAYLIST_CONTROL_ACCESS_ERROR, or
when PictureFlow quit.
Change-Id: I661c59057b5315ba793ee1674f7a2ea1ffd7968d
when the scrollbar was on left and number of items was < nb_lines
the spacing between title and items was off by sb_width
selected item no longer draws separators when no colums are selected
Change-Id: If564261759721eb7bcf3b7b4ba58bf9c130771b0
Instead of checking for certain hardcoded strings, fetch
the actual capability bitmask by instantiating an installer
and querying it.
Change-Id: I7883d9c1e90da37ee7c0189732ac626685adbfa1
The 100 mA USB current limit added in commit 90dd2f84a9
is a problem when booting with a completely dead battery.
Often 100 mA isn't enough to power the player, never mind
charge the battery, so revert to the old behavior of only
limiting charge current.
Given that the original firmware on these devices isn't
following the USB spec to the letter, it's probably not
worth trying to make Rockbox do so unless and until it
causes a real problem - which hasn't happened yet.
Change-Id: I179a08310c226fe01460680c62fd25fd69079256
This problem actually had nothing to do with USB boot; it's
because the cable is plugged in when the USB mode menu item
is selected. The USB thread detected the select button press
and went into charge-only mode (as it usually does when you
hold down a key in Rockbox). This is fixed by having the USB
thread ignore most keys in the bootloader.
USB connect events are delivered via the button queue, and
there were also cases where the connection could be missed
if the event happened within another UI screen. This should
also be fixed.
Change-Id: I077d705a6ac845c8713219eee45d26aa6addfa61
Guard against division by zero and prevent the time_now
value from going negative if the counter drops below zero.
Change-Id: Ia8cadfe76086d6d0200964c1f27bab0be708b135
allow the guts of gui_sync_list to be used with owner drawn items
WIP
printcell_helper--
goal: allow data to be displayed in a spreadsheet format with an easy to use interface
printcell_set_columns(gui_synclist, title, icon)
sets title and calculates cell widths
each column is identified by '$' character
ex 3 columns title = "Col1$Col2$Col3"
also accepts $*WIDTH$
ex 3 columns varying width title = "$*64$Col1$*128$Col2$Col3
printcell_enable(gui_synclist, enable)
sets the printcell function enabled
After setting the columns and enabling the printcell function
items can be added to the list like normal
column items are supplied delimited by '$'
ex item = "Item1$item2$item3"
they will be placed in cells defined by set_columns and scroll if the cell is too small
--Fixed for 1 bit & 2 bit displays
Change-Id: I49bd7903005d7a54e93af4379b0cdea63c860656
- Fix binary name in Info.plist.
- Run dmgbuild as Python module, in some cases it isn't available directly.
- Add missing dmgbuild configuration for themeeditor.
Change-Id: I2db50959b88283f43e2203cf71b130cdb33103dd
Make tests implemented as data driven tests show a sensible test data
tag value, so test can get identified more easily.
Change-Id: Ifeb42ed11ce9a8efc6491b2c3b9fe31802a67d33
Adds a command for showing track info to
the Playlist Viewer's context menu, which
brings up the same screen used by the WPS
for currently playing tracks.
Change-Id: I17d99671935934dad565d290a0d6fb3b0dfd8b01
Adds a 'PictureFlow' command to database context
menus for quickly bringing up the album for a
song in PictureFlow.
Change-Id: I88cd89e93d9418558c698a15fc7fb5d9a90fb262
This method, while far from perfect, is able to make use of
real-time battery usage information and updates frequently
in fine-grained increments. This should make time estimates
a lot more useful than they previously were.
Change-Id: I66c6daba88210f60a27e239fbbcc56869be3b878
The way this was done before was wrong - limiting the charge
current is not enough since the device will draw additional
power to run. Use the AXP192's vbus current limit control to
stay compliant with the USB specification.
Change-Id: I91b84e3480a432e49bec53cf2a17e4e3444404a4
I noticed a few mistakes in the old driver code and it was in
need of an overhaul anyway... I decided to scale things back,
simplify the code and remove most of the debug menus, netting
a nice code size savings.
One new feature is an advanced debug menu which is accessible
by recompiling the code with AXP_EXTRA_DEBUG. It adds quite a
bit of code size and isn't useful other than for development
so it must be manually enabled by editing the source.
Change-Id: I30e17c1194c14823decd726a574ed14451d4cb2d
