Depends on http://gerrit.rockbox.org/r/#/c/1043/.
This patch adds a new setting in Settings -> General -> System: USB Mode.
Usable in Quickscreen and Shortcuts.
Possible settings are:
- Mass Storage: The default, on USB connect export the internal and external
drives as usual. Rockbox will exit gracefully in this case, since the internal
drive (/mnt/sdcard) is exported as mass storage device and Android prevents
Rockbox from continued execution.
- Charge Only: USB charge only, do not export the internal and external drives.
This will not close Rockbox.
- ADB: Enable the Android Debug Bridge. This will not close Rockbox.
Charge only and ADB are actually the same, since it is not yet established if
charge only is doable without adb and major hooks into Android.
German translation provided.
This may be genric for Android based devices but is only enabled
for iBasso Devices. Other maintainers may choose do adopt this.
Change-Id: I616247c29946c6595ebcf8f0c14b2410c9f0498b
Depends on http://gerrit.rockbox.org/r/#/c/1043/.
This patch adds a new setting in Settings -> General
-> System: Freq Scaling Governor
Usable in Quickscreen and Shortcuts.
Possible settings are:
- Conservative: Slow frequency switching.
- Ondemand or Interactive: Fast frequency switching.
- Powersave: Allways lowest frequency.
- Performance: Allways highest frequency.
German translation provided.
This may be genric for Android kernel based devices but is only enabled
for iBasso Devices. Other maintainers may choose do adopt this.
Change-Id: I10296f5be9586ad3a409105db0cd03682a30e9c1
perceptual bass enhancement
- a bbe-ish group delay corrction with Biophonic EQ boost.
- precut
auditory fatigue reduction
-reduce signal in frequency that may trigger temporary threshold shift
haas surround
-frequency between f(x1) and f(x2) is always bypassed.
-can apply to side only.
Change-Id: Icb6355ce9b1c99bf2c58c9385c3c411c0ae209d3
Otherwise item.cfg_name and item.default_val
will contain garbage. It doesn't seem to have
an effect right now, but who knows what
a future refactoring might do.
cppcheck reported:
[rockbox/apps/settings.c:1268]: (error) Uninitialized variable: item
Change-Id: Ic4d0c302929613de8f291cd2d69cd39db8711107
To stop erroneous button presses, allow users to add a deadzone between
the button via the Settings > General > System menu > Touch Dead Zone.
The configuration was chosen this way: the touchpad has the same DPI
in both direction so the setting applies the same on both the X and Y
axis. The setting ranges from 0 to 100 and is internally multiplied by 2
giving a maximum deadzone of 2*100 = 200 around each button, which
account for 400 total (once around each button), effectively reducing
each virtual button from 1000x600 to 600x200 when using the maximum value.
Change-Id: I8683c63d2950200eb32d1dda0a00bbd92d83d5be
Reviewed-on: http://gerrit.rockbox.org/677
Reviewed-by: Benjamin Brown <foolshperson@gmail.com>
Tested: Benjamin Brown <foolshperson@gmail.com>
Reviewed-by: Amaury Pouly <amaury.pouly@gmail.com>
This patch redoes the filesystem code from the FAT driver up to the
clipboard code in onplay.c.
Not every aspect of this is finished therefore it is still "WIP". I
don't wish to do too much at once (haha!). What is left to do is get
dircache back in the sim and find an implementation for the dircache
indicies in the tagcache and playlist code or do something else that
has the same benefit. Leaving these out for now does not make anything
unusable. All the basics are done.
Phone app code should probably get vetted (and app path handling
just plain rewritten as environment expansions); the SDL app and
Android run well.
Main things addressed:
1) Thread safety: There is none right now in the trunk code. Most of
what currently works is luck when multiple threads are involved or
multiple descriptors to the same file are open.
2) POSIX compliance: Many of the functions behave nothing like their
counterparts on a host system. This leads to inconsistent code or very
different behavior from native to hosted. One huge offender was
rename(). Going point by point would fill a book.
3) Actual running RAM usage: Many targets will use less RAM and less
stack space (some more RAM because I upped the number of cache buffers
for large memory). There's very little memory lying fallow in rarely-used
areas (see 'Key core changes' below). Also, all targets may open the same
number of directory streams whereas before those with less than 8MB RAM
were limited to 8, not 12 implying those targets will save slightly
less.
4) Performance: The test_disk plugin shows markedly improved performance,
particularly in the area of (uncached) directory scanning, due partly to
more optimal directory reading and to a better sector cache algorithm.
Uncached times tend to be better while there is a bit of a slowdown in
dircache due to it being a bit heavier of an implementation. It's not
noticeable by a human as far as I can say.
Key core changes:
1) Files and directories share core code and data structures.
2) The filesystem code knows which descriptors refer to same file.
This ensures that changes from one stream are appropriately reflected
in every open descriptor for that file (fileobj_mgr.c).
3) File and directory cache buffers are borrowed from the main sector
cache. This means that when they are not in use by a file, they are not
wasted, but used for the cache. Most of the time, only a few of them
are needed. It also means that adding more file and directory handles
is less expensive. All one must do in ensure a large enough cache to
borrow from.
4) Relative path components are supported and the namespace is unified.
It does not support full relative paths to an implied current directory;
what is does support is use of "." and "..". Adding the former would
not be very difficult. The namespace is unified in the sense that
volumes may be specified several times along with relative parts, e.g.:
"/<0>/foo/../../<1>/bar" :<=> "/<1>/bar".
5) Stack usage is down due to sharing of data, static allocation and
less duplication of strings on the stack. This requires more
serialization than I would like but since the number of threads is
limited to a low number, the tradoff in favor of the stack seems
reasonable.
6) Separates and heirarchicalizes (sic) the SIM and APP filesystem
code. SIM path and volume handling is just like the target. Some
aspects of the APP file code get more straightforward (e.g. no path
hashing is needed).
Dircache:
Deserves its own section. Dircache is new but pays homage to the old.
The old one was not compatible and so it, since it got redone, does
all the stuff it always should have done such as:
1) It may be update and used at any time during the build process.
No longer has one to wait for it to finish building to do basic file
management (create, remove, rename, etc.).
2) It does not need to be either fully scanned or completely disabled;
it can be incomplete (i.e. overfilled, missing paths), still be
of benefit and be correct.
3) Handles mounting and dismounting of individual volumes which means
a full rebuild is not needed just because you pop a new SD card in the
slot. Now, because it reuses its freed entry data, may rebuild only
that volume.
4) Much more fundamental to the file code. When it is built, it is
the keeper of the master file list whether enabled or not ("disabled"
is just a state of the cache). Its must always to ready to be started
and bind all streams opened prior to being enabled.
5) Maintains any short filenames in OEM format which means that it does
not need to be rebuilt when changing the default codepage.
Miscellaneous Compatibility:
1) Update any other code that would otherwise not work such as the
hotswap mounting code in various card drivers.
2) File management: Clipboard needed updating because of the behavioral
changes. Still needs a little more work on some finer points.
3) Remove now-obsolete functionality such as the mutex's "no preempt"
flag (which was only for the prior FAT driver).
4) struct dirinfo uses time_t rather than raw FAT directory entry
time fields. I plan to follow up on genericizing everything there
(i.e. no FAT attributes).
5) unicode.c needed some redoing so that the file code does not try
try to load codepages during a scan, which is actually a problem with
the current code. The default codepage, if any is required, is now
kept in RAM separarately (bufalloced) from codepages specified to
iso_decode() (which must not be bufalloced because the conversion
may be done by playback threads).
Brings with it some additional reusable core code:
1) Revised file functions: Reusable code that does things such as
safe path concatenation and parsing without buffer limitations or
data duplication. Variants that copy or alter the input path may be
based off these.
To do:
1) Put dircache functionality back in the sim. Treating it internally
as a different kind of file system seems the best approach at this
time.
2) Restore use of dircache indexes in the playlist and database or
something effectively the same. Since the cache doesn't have to be
complete in order to be used, not getting a hit on the cache doesn't
unambiguously say if the path exists or not.
Change-Id: Ia30f3082a136253e3a0eae0784e3091d138915c8
Reviewed-on: http://gerrit.rockbox.org/566
Reviewed-by: Michael Sevakis <jethead71@rockbox.org>
Tested: Michael Sevakis <jethead71@rockbox.org>
add_event_ex is added that takes an extra user_data pointer. This pointer is
passed to the callback (add_event and add_event_ex have slightly different
callbacks types). All callbacks also get the event id passed. Events added
with add_event_ex must be removed with remove_event_ex because the user_data
pointer must match in addition to the callback pointer.
On the other add_event is simplified to omit the oneshort parameter which
was almost always false (still there with add_event_ex).
As a side effect the ata_idle_notify callbacks are changed as well, they
do not take a data parameter anymore which was always NULL anyway.
This commit also adds some documentation to events.h
Change-Id: I13e29a0f88ef908f175b376d83550f9e0231f772
This complements offset-based resume and playback start funcionality.
The implementation is global on both HWCODEC and SWCODEC.
Basically, if either the specified elapsed or offset are non-zero,
it indicates a mid-track resume.
To resume by time only, set elapsed to nonzero and offset to zero.
To resume by offset only, set offset to nonzero and elapsed to zero.
Which one the codec uses and which has priority is up to the codec;
however, using an elapsed time covers more cases:
* Codecs not able to use an offset such as VGM or other atomic
formats
* Starting playback at a nonzero elapsed time from a source that
contains no offset, such as a cuesheet
The change re-versions pretty much everything from tagcache to nvram.
Change-Id: Ic7aebb24e99a03ae99585c5e236eba960d163f38
Reviewed-on: http://gerrit.rockbox.org/516
Reviewed-by: Michael Sevakis <jethead71@rockbox.org>
Tested: Michael Sevakis <jethead71@rockbox.org>
talk_init() is called by settings_apply() already which is called on boot.
Doing it again means loading the voicefile a second time which isn't necessary.
Change-Id: I4decd16401e63bf87338d3163c99d06d69fe3a3c
These where used for line styling during scrolling, which is now done in apps/,
The viewport struct doesn't need to record these anymore.
Change-Id: I810d9dcb2644b00a798c6e75acab69c74a78e77f
Replaces the NATIVE_FREQUENCY constant with a configurable frequency.
The user may select 48000Hz if the hardware supports it. The default is
still 44100Hz and the minimum is 44100Hz. The setting is located in the
playback settings, under "Frequency".
"Frequency" was duplicated in english.lang for now to avoid having to
fix every .lang file for the moment and throwing everything out of sync
because of the new play_frequency feature in features.txt. The next
cleanup should combine it with the one included for recording and
generalize the ID label.
If the hardware doesn't support 48000Hz, no setting will be available.
On particular hardware where very high rates are practical and desireable,
the upper bound can be extended by patching.
The PCM mixer can be configured to play at the full hardware frequency
range. The DSP core can configure to the hardware minimum up to the
maximum playback setting (some buffers must be reserved according to
the maximum rate).
If only 44100Hz is supported or possible on a given target for playback,
using the DSP and mixer at other samperates is possible if the hardware
offers them.
Change-Id: I6023cf0c0baa8bc6292b6919b4dd3618a6a25622
Reviewed-on: http://gerrit.rockbox.org/479
Reviewed-by: Michael Sevakis <jethead71@rockbox.org>
Tested-by: Michael Sevakis <jethead71@rockbox.org>
This is going right in since it's long overdue. If anything is goofed,
drop me a line or just tweak it yourself if you know what's wrong. :-)
Make HW/SW codec interface more uniform when emulating HW functionality
on SWCODEC for functions such as "audiohw_set_pitch". The firmware-to-
DSP plumbing is in firmware/drivers/audiohw-swcodec.c. "sound_XXX"
APIs are all in sound.c with none in DSP code any longer.
Reduce number of settings definitions needed by each codec by providing
defaults for common ones like balance, channels and SW tone controls.
Remove need for separate SIM code and tables and add virtual codec header
for hosted targets.
Change-Id: I3f23702bca054fc9bda40f49824ce681bb7f777b
Instead of 3 cfg lines per eq band there is now a single line
for each:
<config name>: <cutoff/center freq>, <q>, <gain>
In addition, the config value names make a bit more sense.
The old settings are still readable but config.cfg and any new
settings files will be written with the new config values. (The
old settings will be removed completly sometime after the next
stable release).
Also a slight rework of the advanced EQ menu UI
Change-Id: I9008658d36ded442a5f2f825916df42a3934cbef
Reviewed-on: http://gerrit.rockbox.org/394
Reviewed-by: Jonathan Gordon <rockbox@jdgordon.info>
HAVE_USB_CHARGING_ENABLE is not only used for software usb, so checking
for HAVE_USBSTACK is wrong.
Change-Id: I422796b517c262f33f35623e992434219e288424
Make set_sleep_timer a static function and only call
set_sleeptimer_duration externally, which is always called with minutes
values.
Change-Id: I985308bf014e354f91c47a0b2bf62f4f5a591919
Reviewed-on: http://gerrit.rockbox.org/327
Reviewed-by: Jonathan Gordon <rockbox@jdgordon.info>
Emulates the basic "Meier" crossfeed (2 capacitors, 3 resistors)
as discussed in
http://www.meier-audio.homepage.t-online.de/passivefilter.htm
This crossfeed blends a bit of low-pass filtered L signal into
the R signal (and vice versa) while adding about 300 us delay
to the crossfed-signal. A difference with the crossfeed already
present in rockbox, is that this algorithm keeps the total
spectrum flat (the one currently in rockbox accentuates
low-frequency signals, making it sound a bit muffled).
This implementation is quite lightweight, just 3 multiplies per
left-right pair of samples. Has a default C implementation and
optimized assembly versions for ARM and Coldfire.
The crossfeed effect is quite subtle and is noticeable mostly
one albums that have very strong left-right separation (e.g.
one instrument only on the left, another only on the right).
In the user interface, the new crossfeed option appears as
"Meier" and is not configureable. The existing crossfeed is
renamed to "Custom" as it allows itself to be customised.
There is no entry for the user manual yet.
Change-Id: Iaa100616fe0fcd7e16f08cdb9a7f41501973eee1
Also move the definition to config.h
Change-Id: I36bb5020c5e06b2344292bc05e8c13ccc7a6a1ff
Reviewed-on: http://gerrit.rockbox.org/234
Reviewed-by: Nils Wallménius <nils@rockbox.org>
Moves replaygain definitions to lib/rbcodec/dsp/dsp_misc.h.
Intermediate functions in misc.c handle any adjustment and calling
the rbcodec APIs.
Change-Id: I9f03561bca9aedd13760cf19c4e19aa3c68e7024
Reviewed-on: http://gerrit.rockbox.org/140
Reviewed-by: Michael Sevakis <jethead71@rockbox.org>
Creates a standard buffer passing, local data passing and messaging
system for processing stages. Stages can be moved to their own source
files to reduce clutter and ease assimilation of new ones. dsp.c
becomes dsp_core.c which supports an engine and framework for effects.
Formats and change notifications are passed along with the buffer so
that they arrive at the correct time at each stage in the chain
regardless of the internal delays of a particular one.
Removes restrictions on the number of samples that can be processed at
a time and it pays attention to destination buffer size restrictions
without having to limit input count, which also allows pcmbuf to
remain fuller and safely set its own buffer limits as it sees fit.
There is no longer a need to query input/output counts given a certain
number of input samples; just give it the sizes of the source and
destination buffers.
Works in harmony with stages that are not deterministic in terms of
sample input/output ratio (like both resamplers but most notably
the timestretch). As a result it fixes quirks with timestretch hanging
up with certain settings and it now operates properly throughout its
full settings range.
Change-Id: Ib206ec78f6f6c79259c5af9009fe021d68be9734
Reviewed-on: http://gerrit.rockbox.org/200
Reviewed-by: Michael Sevakis <jethead71@rockbox.org>
Tested-by: Michael Sevakis <jethead71@rockbox.org>
dsp_set_eq_coefs now has parameters for the band settings, so it doesn't
need to access global_settings.
Change-Id: I29ac19fc353b15a79cb25f0e45132aef0881e4c9
Reviewed-on: http://gerrit.rockbox.org/138
Reviewed-by: Nils Wallménius <nils@rockbox.org>
example: %T(0,0,20,12, setting_set, repeat, off)
That will set the repeat mode to "off" when it is pressed.
"setting_set" is the action name
"repeat" is the name of the setting in the config files
"off" is the value to set it to (same values as the legal values in the config files)
Not all settings are supported, outright unsupported settings will fail to parse. Some settings might not work too well if they don't apply instantly (Any that work well int he quickscreen should work well here)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@29483 a1c6a512-1295-4272-9138-f99709370657
Instead implement a bit of battery monitoring. Currently it only fetches the battery level (in %) every 30s,
but it could do more like battery status, charger connected, voltage...
Theoretically, we could also exit/quit after some time of inactivity too
(perhaps not a bad idea since Rockbox puts a slight but still non-zero CPU load even if doing nothing).
Ironically, Rockbox is now the only way to get the exact battery level (at least I haven't found anything yet) on my phone :-)
git-svn-id: svn://svn.rockbox.org/rockbox/trunk@27974 a1c6a512-1295-4272-9138-f99709370657
