Allows user to decide whether scrolling lists will wrap around
to the opposite end after the first or last item has been reached.
Change-Id: I22156812cf4c857ddc4b6c48c1cef013b1985260
- Enable repeat for prev/next keys
- Provide a way to access the context menu using buttons
- Update the manual
Change-Id: I53a7474cc64f915851175aea0695229c581fd8a6
* Fix a typo in a URL
* Note how to enter the OF from the bootloader
* Document how to perform a hard reset
Change-Id: I96d0d64cbd251573e1c5c55657ee5c5db510d9a6
Fixes some names not showing in the manual.
Note that there's one name left not showing due to LaTeX unicode support
missing the characters.
Change-Id: I9f1d0d3d49b485be54c83486a23cf97c82d257c8
KOMAscript 3.28 changes \ifpdfoutput to \Ifpdfoutput. Add a check and
redefine the new command as the old one if it's missing since only the
name was changed. Not all Linux distros have a recent enough version
yet.
Change-Id: Ie709a1c85f10e1ddebb703ae50d3539f1aeee8bb
It needs screenshots and slightly better installation instructions
Includes bits shared with other HibyOS platforms
Change-Id: I1c1974143b5badf1aca5c3281556ce553ab1b8a5
Includes installation instructions and a description of Rockbox's
limitations versus the original firmware. Some things are still
missing, notably screenshots for the Q1. The M3K image also needs
to be updated to include the 'select' button.
Change-Id: Ib533206df01925203edeccdd75e1bf22f407e794
Intercept buttonpress and action, and nullify both if the button
is part of the touchpad. Only affects autolock functionality.
Adding removal of note about autolock in the manual - the lock
button no longer needs to be pressed at least once to prime
the autolock, if enabled, since commit 14f7a95
Change-Id: Ic3582764df490d96abc2d78116f23cbe0fdd6173
Works from any playlist saving operation accessed from the
While Playing Screen, all other playlist saving operations
are unchanged.
Now a user-selectable setting! Located in
General Settings -> Playlists -> Current Playlist ->
Reload After Saving (Yes/No)
Change-Id: I5085c3f4c56c518a812d5ee015d15cc4dca19a28
The X3's line out is a bit hot, at ~4.3Vpp, so allow it to be backed off.
(On my X3, backing it off to -6dB brings Vpp down to ~3.4V)
Change-Id: Iea38ef1c6a1b183d0f8fb4eaf2bf9ed6b350a532
Tested on ErosQ
Added a setting in the Advanced Softlock menu to always
have autolock on, rather than having to "arm" it with the
softlock button. Lock/Unlock still works the same with
this on, but when the screen turns off, the device always
ends up in the locked state. Requires Autolock On to be
set as well, and the normal Autolock functionality is
unchanged with this off.
Caveat: the power/softlock button must be pressed
at least once after powering on the device or enabling the
feature. After that, it should consistently always "arm"
the autolock.
Added feature to manual in
manual/configure_rockbox/system_options.tex. Also updated
some labels I had changed in the Advanced Key Lock menu
and added information for Disable All Lock Notifications
in a previous commit. Shared items also updated in
manual/configure_rockbox/display_options.tex for selective
backlight.
Change-Id: I09dc6814bee803e40c7088157e1fe9d01d5f3474
- note that availability of options depends on player state
- present options that only insert tracks separately from those that also remove tracks
- add short intro for the latter.
Change-Id: Ie99ef7dff77da0cb136c761da1c11f83936f86f5
(as per multiple user requests)
When playback is stopped, Rockbox will display an option to
clear the current playlist and add selected tracks in random order, if
Shuffled Adding options are enabled in Settings.
Insert options will not be displayed anymore when playback is stopped to
lessen confusion.
Change-Id: I5e5819149027e63e5c6f30213e838c0d7e7de8d5
Options to add shuffled tracks and to queue tracks in the
Current Playlist Submenu can now be hidden, or the latter
can also be put into its own submenu.
Users can customize this in Settings by going to
"General Settings - Playlists -> Current Playlist" and
choosing from "Show Shuffled Adding Options" (No / Yes)
or "Show Queue Options" (No / Yes / In Submenu).
Allows for the paring down of the set of choices to
a minimum of the 4 more common ones for adding tracks
to a dynamic playlist (coming from the current total
of 11).
Defaults have been set so that users have to actively
modify their settings to notice any difference, which
makes it unlikely that anybody's workflow would be
negatively affected by this change.
Change-Id: Ibe48fc4da2c79f54cd7272df8e1e3ba9955203e5
- Bring description of "Create Playlist" command up to date
- Explain that entries added by Insert Shuffled aren't contiguous
- Introduce Queue options in a short paragraph
Change-Id: I1104449f72a78794368b6d8c4d0574bb645c93b2
Keeping in sync with how Rockbox currently works:
- Context menu doesn't include an option to "View Catalogue" anymore
- What used to be the "Playlists" menu is now the context menu of the "Playlist Catalogue"
- Context menu includes an option to "Reset Playlist Catalogue Directory"
Also updated info regarding the "Create Playlist" option.
Change-Id: I717bab9d26a9a08fb95083b67a779541e00a0fd3
The "View" option for playlists/.m3u files is currently part of the "Current Playlist" submenu even though it refers to the selected file/playlist and has nothing to do with the current playlist. It has been relocated to the context menu of the playlist file where it makes more sense and is easier to get to.
Change-Id: I806ed46a7315293d7d20f29ed004cc8ab58cdcb7
The manual has been updated to reflect the fact that the current title of the submenu for adding music in the context menu is "Current Playlist". (The WPS context menu has a different submenu called "Playlist")
Change-Id: I2bbeabad6d24673c46d3322529478c4a7a61ca88
The "Play Next" function replaces the current dynamic playlist, so it makes sense to convey that information to the user when displaying the option in a context menu.
Change-Id: Ic6e03e4adbd811e28b5cfeba36b64c5e8a7db2f9
1) The Insert functionality was changed in abebc6b to not delete
unfinished dynamic playlists anymore. "Play Next" has now been
added as an option when playback is stopped. The behavior of
"Play Next" as such has not changed and it is now the consistent
way to replace a current playlist in all playback modes.
2) The 'Insert' and 'Insert Shuffle' options will now only be
displayed if there is a resumable dynamic playlist
Change-Id: Ib5c5469b9e2c583ab06e0f47a922c24e5adf6b5f
When playback is stopped and the user inserts songs, Rockbox will not erase a dynamic playlist anymore, unless it has finished playing.
Change-Id: I50bd62fbfe3929a0b651b5136e9305b9bc9278f3
'SUBDIRS' file has puzzles inside a 'HAVE_LCD_COLOR' block. I found this
issue because sgt-puzzles was in the Clip+ docs while they were not
installed on the target.
Change-Id: I8ddf43fa75c8429d2f1a99f13689a5442913748e
v3: Add in config option
v4: Bugfixes
v5: Force a redraw upon exiting
v6: keypress-in-chargeonly mode enables mass storage (and vice versa)
v7: Fix bootloader builds
v8: Update manual, and have bootloader respect keypresses
v9: Change default to mass storage (ie no change in behavior)
todo:
* test-build dx50/dx90
* Switch from yes/no to proper menu?
* prevent WPS progress bar from drawing over us
Change-Id: I82e0ccb08497b7a5aa756ce77f1332ee963703a7
...
Change-Id: I7946cf240b18a4fa8ace5e25e1eb6e97b8b12d7c
open_plugin allows arbitrary plugins to be called
in hotkey and start screen
replaces PictureFlow Integration
shortcuts menu plays plugins now too
rather than store paths and parameters in the settings
that reside in memory instead entries in a file are searched by hash.
after all, the plugin has to be loaded from disk anyways
----------------------------------------------------------------------------
shortcut_viewer.rock-- can now call plugins rather than taking you to them
in the browser
-----------------------------------------------------------------------------
Added a new option to menus:
F_CB_ON_SELECT_ONLY
instead of option callback every time a item is accessed
F_CB_ON_SELECT_ONLY fires callback only when item is selected
-----------------------------------------------------------------------------
Added manual entries
-----------------------------------------------------------------------------
Change-Id: I078b57b1d2b4dd633c89212c1082fcbc1b516e6a
'swcodec' is now always set (and recording_swcodec for recording-capable
units) in feature.txt so the manual and language strings don't need to
all be fixed up.
Change-Id: Ib2c9d5d157af8d33653e2d4b4a12881b9aa6ddb0
HAVE_LCD_BITMAP is now redundant.
lcd_bitmap is always-on in features.txt so manual and lang strings
don't have to change
Change-Id: I08eeb20de48099ffc2dc23782711af368c2ec794
Split apart ipod6g installation instructions from the rest. For unknown
reasons the \opt and \nopt tests were causing the \code blocks to go wonky
Change-Id: I99b96cd17bd817e18b3487a92b66e966e39397d6
Add bottom left as quickscreen and bottom right as hotkey acroos the
board for fuze+. Meant as a
stopgap until gesture support becomes good enough that it is unnecessary
Also adds my name to CREDITS
Change-Id: If1729b7d53d967081b6d97a9a49cd66312c96ed4
This ports id Software's Quake to run on the SDL plugin runtime. The
source code originated from id under the GPLv2 license. I used
https://github.com/ahefner/sdlquake as the base of my port.
Performance is, unsurprisingly, not on par with what you're probably
used to on PC. I average about 10FPS on ipod6g, but it's still
playable.
Sound works well enough, but in-game music is not supported. I've
written ARM assembly routines for the inner sound loop. Make sure you
turn the "brightness" all the way down, or colors will look funky.
To run, extract Quake's data files to /.rockbox/quake. Have fun!
Change-Id: I4285036e967d7f0722802d43cf2096c808ca5799
This is a port of Wolf4SDL, which is derived from the original id
software source release. The port runs on top of the SDL plugin
runtime and is loaded as an overlay.
Licensing of the game code is not an issue, as discussed below
(essentially, the Debian project treats Wolf4SDL as GPLv2, with an
email from John Carmack backing it up):
http://forums.rockbox.org/index.php?topic=52872
Included is a copy of MAME's Yamaha OPL sound chip emulator
(fmopl_gpl.c). This file was not part of the original Wolf4SDL source
(which includes a non-GPL'd version), but was rather rebased from from
a later MAME source which had been relicensed to GPLv2.
Change-Id: I64c2ba035e0be7e2f49252f40640641416613439
Adds screenshots for all supported targets. Also adds a bit of information
to point users to the data files.
Change-Id: I5e0f1bcdb73690a14616a3e486228c73b1617ffc
Original patch by Alexander Spyridakis
Modified by Steve Bavin and Igor Poretsky
Keymap fixes by Marianne Arnold
Change-Id: I5a252d97d2b05c533e048931f7354f4261f76499
Modified version from ticket, taken from Igor Poretsky's tree, and
further modified to incorporate feedback.
Change-Id: I9284497d53a0247a51739d29fdc1db5fbbebfadc
Allow user to select cpu undervolt
There have been quite a few issues across the SANSA AMS line related
to CPU undervolting while most players show greatly increased runtime
some crash.
Rather than constanly upping the voltage we now have a
setting with a safe value for all players and the option for lower voltages
I plan to add a few other options here later such as disk
timings and maybe some other clocks/experimental settings
Added: Disk Low speed option for AS3525v2 devices cuts
frequency to 12 MHz from 24 MHz
Added: Disk Low speed option for AS3525v1 devices cuts
frequency to 15.5 MHz from 31 MHz
Added: I2c Low Speed AS3525 devices, should be bigger improvement for v1 devices
Fixed: Debug menu for AS3525v2 No SDSLOT frequency,
Showed IDE freq though it is unused
Added: DBOP and SSP underclocking affects display on v1/v2 respectively
Fixed: debug menu now has SSP frequency, and SSP_CPSR
Update: made settings menu more generic
Update: cleaned up code
Added: Clip v1 & Fuze v1 didn't have HAVE_ADJUSTABLE_CPU_VOLTAGE.
not sure why but, waiting on testing to confirm
Added: C200v2 and E200v2 devices and HAVE_ADJUSTABLE_CPU_VOLTAGE.
Fixed: v1 devices don't like display timing set lower (dbop)
v1 devices don't have a divider set for ssp (causes divide by 0)
Fixed: ClipZip display lags with Max SSP divider changed from 0xFE to 0x32
Fixed: v1 devices didn't work properly with highspeed sd cards
Added code from http://gerrit.rockbox.org/r/#/c/1704/
Added powersave and IDE interface enable/disable
Added: V2 devices now have powersave enabled on sd interface
Update: cleaned up code, lang defines, added manual entries
Update ssp clock mechanism added calculated ssp divider to clipzip
Update turn display clock off when clip+ turns off display
Fixed: clipzip wrong register for SSP clock
Change-Id: I04137682243be92f0f8d8bf1cfa54fbb1965559b
TODO: add other players?
