| .. |
|
adc-imx31.c
|
Gigabeat S: Implement charging and power control to charge from AC or USB. Hold MENU while plugging USB cable to charge from USB without connecting. Under Windows, plugging USB for charging only but not connecting still needs to be properly handled (driver popup issue) but it will charge when connected normally-- no issue under Linux. Some accomodating changes made to powermgmt.c will soon be made nicer.
|
2008-12-21 18:10:36 +00:00 |
|
adc-target.h
|
Gigabeat S: Implement charging and power control to charge from AC or USB. Hold MENU while plugging USB cable to charge from USB without connecting. Under Windows, plugging USB for charging only but not connecting still needs to be properly handled (driver popup issue) but it will charge when connected normally-- no issue under Linux. Some accomodating changes made to powermgmt.c will soon be made nicer.
|
2008-12-21 18:10:36 +00:00 |
|
ata-imx31.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
ata-target.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
audio-gigabeat-s.c
|
FS#9609 FM radio support for the Gigabeat S, seeking/scanning is not yet
|
2008-12-09 20:48:04 +00:00 |
|
avic-imx31.c
|
Gigabeats S: Simply ignore that occasional spurious unknown IRQ (-1) that goes through irq_handler even if the AVIC is used. If no pending interrupt is indicated (anything else should be vectored), simply returning from the handler appears to have no ill effect. The cause for entering irq_handler is unknown for now (or I missed something important :\).
|
2008-11-27 11:49:49 +00:00 |
|
avic-imx31.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
backlight-imx31.c
|
Gigabeat S: Turn off backlight LED supply after a 2-second delay and save a little power. Hardware fading required keeping supply enabled during fade out. Let fade happen at poweroff (might as well~~~).
|
2008-12-04 04:16:53 +00:00 |
|
backlight-target.h
|
Gigabeat S: Turn off backlight LED supply after a 2-second delay and save a little power. Hardware fading required keeping supply enabled during fade out. Let fade happen at poweroff (might as well~~~).
|
2008-12-04 04:16:53 +00:00 |
|
button-imx31.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
button-target.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
clkctl-imx31.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
clkctl-imx31.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
dma_start.c
|
|
|
|
fmradio-i2c-gigabeat-s.c
|
FS#9609 FM radio support for the Gigabeat S, seeking/scanning is not yet
|
2008-12-09 20:48:04 +00:00 |
|
gpio-gigabeat-s.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
gpio-imx31.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
gpio-imx31.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
gpio-target.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
i2c-imx31.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
i2c-imx31.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
i2s-imx31.c
|
Fix missing #includes and make local functions static for gigabeat
|
2008-07-18 23:28:54 +00:00 |
|
kernel-imx31.c
|
Strange little kernel optimization to ease targeting the timer tick and to limit the number of loops in the tick function to the number of tasks added rather than always looping the max number.
|
2008-10-27 16:30:24 +00:00 |
|
lcd-imx31.c
|
Gigabeat S: Turn off backlight LED supply after a 2-second delay and save a little power. Hardware fading required keeping supply enabled during fade out. Let fade happen at poweroff (might as well~~~).
|
2008-12-04 04:16:53 +00:00 |
|
lcd-target.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
mc13783-gigabeat-s.c
|
Gigabeat S: Implement charging and power control to charge from AC or USB. Hold MENU while plugging USB cable to charge from USB without connecting. Under Windows, plugging USB for charging only but not connecting still needs to be properly handled (driver popup issue) but it will charge when connected normally-- no issue under Linux. Some accomodating changes made to powermgmt.c will soon be made nicer.
|
2008-12-21 18:10:36 +00:00 |
|
mc13783-imx31.c
|
Fix red and a couple other things I somehow missed.
|
2008-12-10 09:11:43 +00:00 |
|
mc13783-target.h
|
Gigabeat S: Implement charging and power control to charge from AC or USB. Hold MENU while plugging USB cable to charge from USB without connecting. Under Windows, plugging USB for charging only but not connecting still needs to be properly handled (driver popup issue) but it will charge when connected normally-- no issue under Linux. Some accomodating changes made to powermgmt.c will soon be made nicer.
|
2008-12-21 18:10:36 +00:00 |
|
mmu-imx31.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
mmu-imx31.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
pcm-imx31.c
|
Use set/clr instead of mod functions where applicable.
|
2008-12-19 15:30:30 +00:00 |
|
power-imx31.c
|
Gigabeat S: Implement charging and power control to charge from AC or USB. Hold MENU while plugging USB cable to charge from USB without connecting. Under Windows, plugging USB for charging only but not connecting still needs to be properly handled (driver popup issue) but it will charge when connected normally-- no issue under Linux. Some accomodating changes made to powermgmt.c will soon be made nicer.
|
2008-12-21 18:10:36 +00:00 |
|
power-imx31.h
|
Gigabeat S: Implement charging and power control to charge from AC or USB. Hold MENU while plugging USB cable to charge from USB without connecting. Under Windows, plugging USB for charging only but not connecting still needs to be properly handled (driver popup issue) but it will charge when connected normally-- no issue under Linux. Some accomodating changes made to powermgmt.c will soon be made nicer.
|
2008-12-21 18:10:36 +00:00 |
|
powermgmt-imx31.c
|
Fix red. Remove stale comment.
|
2008-12-21 18:27:59 +00:00 |
|
powermgmt-target.h
|
Gigabeat S: Implement charging and power control to charge from AC or USB. Hold MENU while plugging USB cable to charge from USB without connecting. Under Windows, plugging USB for charging only but not connecting still needs to be properly handled (driver popup issue) but it will charge when connected normally-- no issue under Linux. Some accomodating changes made to powermgmt.c will soon be made nicer.
|
2008-12-21 18:10:36 +00:00 |
|
serial-imx31.h
|
Fix missing #includes and make local functions static for gigabeat
|
2008-07-18 23:28:54 +00:00 |
|
spi-imx31.c
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
spi-imx31.h
|
Updated our source code header to explicitly mention that we are GPL v2 or
|
2008-06-28 18:10:04 +00:00 |
|
system-imx31.c
|
Gigabeat S: Implement charging and power control to charge from AC or USB. Hold MENU while plugging USB cable to charge from USB without connecting. Under Windows, plugging USB for charging only but not connecting still needs to be properly handled (driver popup issue) but it will charge when connected normally-- no issue under Linux. Some accomodating changes made to powermgmt.c will soon be made nicer.
|
2008-12-21 18:10:36 +00:00 |
|
system-target.h
|
Fix red. Remove stale comment.
|
2008-12-21 18:27:59 +00:00 |
|
usb-imx31.c
|
Gigabeat S: Implement charging and power control to charge from AC or USB. Hold MENU while plugging USB cable to charge from USB without connecting. Under Windows, plugging USB for charging only but not connecting still needs to be properly handled (driver popup issue) but it will charge when connected normally-- no issue under Linux. Some accomodating changes made to powermgmt.c will soon be made nicer.
|
2008-12-21 18:10:36 +00:00 |
|
usb-target.h
|
Fix missing #includes and make local functions static for gigabeat
|
2008-07-18 23:28:54 +00:00 |
|
wmcodec-imx31.c
|
Use set/clr instead of mod functions where applicable.
|
2008-12-19 15:30:30 +00:00 |
f6789a7d73